Overvolted Razor E300 E325 Electric Scooter Unboxing & Top Speed Test

[@helicrashpro]

I would definitely go with a hub motor. No need for higher off the line torque on a scooter so hub motor is a good option. Plus you get the benefit of being extra quiet loosing the chain drive. Plus you gain more battery space. No brainer IMO.

[@PatOutdoors]

Yeah I think this is the way I’m going. Do you have any in particular you’d like to recommend?

[@ObtuseAcute1]

I'm looking on doing a similar mod, did you find a suitable motor that can get you up to 30?​@@PatOutdoors

[@PatOutdoors]

@@ObtuseAcute1 already did this, check out later videos in the same playlist

[@willtay3016]

Maybe make the batteries easy to swap and keep and extra set on hand

[@PatOutdoors]

I like it, though it would have to be easier to access than how it is right now

[@shtuu18]

I put my shunt modded mx650 controller and throttle on a e300 running on 4 40v tool batteries in paralel with 0 amp protection. Motor may have been already a bit worn only lasted about 5 min but the distance i covered in that 5 min suggests i was doing 25mph at the least. 100% not worth it but also 100% fun

[@flex-e-moto]

Yes sir let's go. Scooter gang.

[@bdrgarage7039]

Those newer skinny tire e300s are 12-13mph best, the older fat tire with 200lbs still hit 15-16mph. I have built many 36v E300s, bith lead acid and lithium. I have seen 23mph modified 36v.

[@PatOutdoors]

Appreciate the input. I’m converting this one to 52v brushless hub motor. Hopefully it’ll hit the 30 mph target

[@bdrgarage7039]

@@PatOutdoors nice, I have wanted to try that. No one has that budget yet. Ha

[@hotdon1]

I don't like the throttle on my e300 but love the scooter.

[@PatOutdoors]

Yeah it's like an on/off switch

[@DJSekuHusky]

Why not flip the motor around so it sits on top? That way you can run an MY1020 with minimal modification. You would have to make a new deck out of plywood or metal, but it would get you the 30MPH you're looking for. I would also advise a variable speed throttle when you replace the motor and controller. Your target should be about 36V with a 1500W controller and a gear ratio of 4, that ought to do 30. Edit: NVM, I saw you went with a hub motor.

[@gamersxq]

I have a question I have all the upgrade kit for mx650 the battery upgrade suspension and all that I would want to know what rear and front sprocket and a chain would you recommend for me on Amazon?. And I love your channel keep it up champ❤️

[@spartanstocktrader4614]

Great video

[@bishop1825]

Just got into these electric bike/scooter. There’s a e300 in my local area. Guy is asking for 50 bucks is it worth grabbing it to upgrade? Love the vids. Waiting on the updated vid for this one. When is it coming out?

[@PatOutdoors]

Please look at the other videos in this same playlist, there should be at least 3 update videos after this one. Really depends what you’re looking for.. one main limiting factor of this scooter is lack of suspension so it feels unsafe upwards of 25 mph

[@MooseRidez]

far driver 72260, 2000w hub, and a 48v/52v batt from amorge done deal lol

[@PatOutdoors]

No space it this thing! Also got a link on that 2000W hub recommendation? I'm about to post the current status of this project shortly.. it's already 52V on an M4 Pro hub rear wheel

[@NormanLor]

A GOOD VIDEO BUT WHY ARE SO MANY VIDEOS REVERSED???!!

[@PatOutdoors]

Reversed?

[@HannibalSahura]

Yo pat I'm west bmore I gotma e250 one can u help me rebuild mines

[@Wadinator]

How did you get the speed booster attachement

[@PatOutdoors]

Link in the description for anything I use on my projects

[@Wadinator]

@@PatOutdoorsI tried it and it toasted my speed controller what should I do

[@PatOutdoors]

@@Wadinator Upgrade to a 36V controller and battery set up.

[@Wadinator]

@@PatOutdoorsok thx

[@milekh6681]

You should to a giveaway

[@PLUHHHHHHHHH]

Half throttles r the worst 😒

[@PatOutdoors]

Yeah.. I'm replacing it with a fully modular thumb throttle

[@ninapaul2398]

😌 'Promo sm'