Choosing the Right Scan Tool - Autel Maxisys MS906BT Scanner Review

Trying to decide on which scan tool to buy can be a difficult choice. The expensive scanners have bi-directional control which is really helpful when doing repairs and correctly diagnosing an issue. The other benefit of a choosing the right scan tool is the ability to program modules. Today's cars are getting more and more sophisticated and we need computers to fix computers. In this video Ozzstar does a full review on the Autel Maxisys MS906BT. Find out in if it's the right choice for you. Thanks for stopping by the channel. Comments and questions are always encouraged and please subscribe if you would like to see future videos. -Glen (Ozz)
*Autel Scan Tool MS906BT* amzn.to/2sgBbIp
Check out some cool tools that Ozzstar likes to use: www.amazon.com...
If this video has helped you out consider donating to the the channel with Paypal, thanks!: www.paypal.me/...
INSTAGRAM: Ozzstar1
FACEBOOK: ozzstar
Mailing address:
Ozzstar
PO BOX 9291
Newark, DE 19714
#autel #scanner #diagnostics

[@ozzstars_cars]

**Autel Scan Tool MS906BT** amzn.to/2sgBbIp Thanks for stopping by the Ozzstar's Cars channel. -Glen (Ozz)

[@Triplemyworth709]

Do you have to use the Bluetooth or does this version come with the wired obd port as well?

[@ozzstars_cars]

@@Triplemyworth709 there is no choice. The tool is wireless and the OBD dongle needs to be used. MS906BT.

[@nataliedavis3765]

Glen where did you order it from.

[@orionbrentley154]

@Drake Marcellus Glad I could help :D

[@BK-it6te]

Programing as well ?

[@marcwoodward8056]

Great review of the tool Glenn! I purchased the MS906BT back in May 2019. I've used the tool on my 2004 BMW 325ci (E46), 05 Porsche Boxster S (987), 2008 BMW 528xi (E60) & 2014 Volvo XC60. I've also used it on my daughter's 2015 Hyundai Accent and my son's 2015 Ford Fusion SE. The tool has been flawless with every car and has all the functionality a home mechanic could want or need! It does have the ability to code in some of the factory disabled features of the BMW's. I'm in the market for a used Porsche Panamera which requires that the PDK transmission service be performed every 60k miles. As part of this service a calibration of the PDK must be performed. The dealer charges about $1,200 for the transmission service with calibration. I did some research and found that my MS906BT has the calibration service under the "Porsche-> Diagnosis-> Transmission Module -> Special Functions". The cost of the service kit from ECS is $249. If I purchase the Panamera and perform this one service, the tool all but pays for itself...just with one service!! That's just one example. Mine has more than paid for itself with all the services I have performed on my vehicles. It is a phenomenal tool and has worked flawlessly since the day I got it. If your on the fence about the purchase of a good scan tool and you think they cost too much, do like I did and look at the jobs you CAN'T do at home and how much a shop would charge you for programming, calibrating or relearning procedures. A tool like the MS906BT is almost a must have for us home mechanics working on late model cars with all their modules.

[@ozzstars_cars]

I agree Marc that the MaxiSys scanners are a really good value. Thanks for the Porsche transmission info. Sounds like you are a true Euro car guy!

[@osos231]

GREAT info,thanks

[@Ethio88503]

You are a fine Gentleman, rare to find these days, I really enjoyed your mentorship for my AUTEL MaxiSys MS906BT!! Thank you

[@ozzstars_cars]

You're welcome.

[@djh3_88hinskey5]

I was a assistant instructor at a small college teaching auto tech. When I got there they had a Snap on unit. It started to do wacky things and freeze. It was windows based and would freeze. We looked into a bunch of units and ended up before I relocated with 2 of the Autel units. Being andriod based made it easy for students to understand as it is much like your phone.

[@ozzstars_cars]

I'd say the Autel units are very intuitive. Anything that makes life easier is good with me.👍

[@jacobinsky6795]

Thank you!!! I've been trying to figure out which scan tool to buy, it's so hard to compare the models! There are 50+ US scan tools made by Autel.

[@ozzstars_cars]

👍

[@donne8694]

Good review ,im a retired tech and you have a lot of professional knowledge,that’s good to see .

[@ozzstars_cars]

Thanks Don. Cars are my passion since I was a little kid.

[@StilettoSniper]

Excellent, well made video. I learned a great deal here, and I am still learning as I lean more and more toward the MS906BT. One thing I would add is that if someone chooses to go with the MS906 instead of the MS906BT, there is another very important difference I discovered other than the wireless Bluetooth connectivity. The MS906 does not support ECU coding at all, whereas the MS906BT supports the same level of coding as its bigger brothers in the Maxisys lineup. (Note: don't confuse coding with programming). To me that is a very important difference in functionality. To me, the ability to perform coding plus the wireless BT capability makes the decision between the 906 and the 906BT for around a $200 price difference a slam-dunk no-brainer.

[@ozzstars_cars]

I agree the MS906BT is a powerful scan tool for the money. Thanks for your comment Sniper.

[@deriklfixit]

I have watched dozens of vids on this, NONE of them were as helpful as this one. this showed me sooo much useful info. the others missed the nuts and bolts details that I had been looking for.

[@ozzstars_cars]

Thanks for your comment, I appreciate it. -Ozz

[@michaeldlacross1146]

Hey On your Scanner I use Industrial Velcro from Home Depot for the dong I just attach to the back so I don't loose the dumb thing. Great VIDEO by the way!! Thanks

[@ozzstars_cars]

Good idea Mike, thanks!

[@rodneyswailes3161]

I bought the same one in October then added the scope. I have used it to bleed the brakes. Also got my fuel trims where they should be. Also a few tests. Works well for me. Built two pressure transducer to use on scope.

[@ozzstars_cars]

How do you like the scope?

[@jpflip]

I learned a lot from this video. So difficult to choose between all the models made by Autel...Price was a major factor ;-) After hours of reflection I finally opted for the M906S model since it is available in a tool store close to my house. Thank you for all the explanations in the video. Your English is excellent since I understood all of your explanations...Thank you very much, from a french canadian!

[@ozzstars_cars]

Great choice!

[@davidwhitehead2602]

This is one of the best reviews of this scanner, very helpfull ,honest ,straight to the point. Great work.

[@ozzstars_cars]

I appreciate your comment David and thank you.

[@IsshmanGarcia]

ALWAYS Back up your "Scan" folder (first day after all updates...then as you feel the need to. Then, definitely back up right before that year of free updates expires.) to external SD Card via ES File Explorer, which is installed on tablet.

[@wyattoneable]

When I got ready to pull the trigger on a advanced scan tool I asked Eric what was best for the money. It was this very scanner. I've had a great time using it and haven't been disappointed. It is over a year old and I need an update, but for what I do I can use it without the update for now. I've not tried the printer option but I need to get that completed. I'm still learning things about this tool so I hung around for the entire video to see what I might have missed. See, I didn't know about the separate SD card option, cool. I liked your elevator music. Great video my friend.

[@ozzstars_cars]

Thanks Wyatt. So far so good with this scanner. Just bummed that I have an OBD1 adapter with it and it's useless. It has rescued my ass on an '18 GM car, video to come out soon.

[@gregriutzel7834]

No OBD1 !! That sucks. It's a pain having good cars that outlived their obsolescence. Great video and content! Thank you

[@ozzstars_cars]

Thank you Greg.

[@yorselrus1996]

Thanks for the video. I decided to order the MaxiPRO MP900-TS. I hope it doesn't fail me. I need to scan a Buick w no codes and crank but no start situation. I'm at a loss to what the problem is. I replaced intake manifold, turbo bypass tube and install new valve cover gasket. It started once and died in a few seconds abd never started again. Fuel pressure checked ok. Other than that, i'm completely clueless. I'm not a professional and only work on my car and families

[@ozzstars_cars]

Scan yools provide data, not the fix. Hopefully the tool will give you the data you need to determine the problem.

[@PROJECTRED5]

They Should Reimburse you for your Tool. This Video will sell alot of these Units. Great Demonstration i will use your link to purchase.

[@ozzstars_cars]

Making videos does take a lot of time and resources to film and edit. I wish Autel would throw me a bone. At least it's good to know I'm helping people out with real world answers. Thanks for the support Red! -Ozz

[@JoseRodriguez-yp2ss]

@@ozzstars_cars great video. Will this work on diesels? Power stroke,Cummins and duramax?

[@ozzstars_cars]

@@JoseRodriguez-yp2ss yes it will

[@robertpope3619]

Great video. I just made the purchase from my tool dealer right now. Can't wait to receive it. After watching your video I was sold on this product.

[@ozzstars_cars]

I believe you are going to like the tool. It's been a great asset for me so far helping fix and solve many broken car issues. You're welcome Robert and thanks for the comment.

[@raymondtuckerjr1886]

I only have two cars, and I don't repair cars for others. I bought an Autel MS309 @ Amazon for 20 bucks....and it does what I need it to do. Good video by you!

[@ozzstars_cars]

Right on

[@ken7808]

Thanks for the great video! I just purchased a much less expensive scan tool and found your evaluation of the one you have to be fascinating. Mine will be used for only a couple of vehicles as I'm a DIYer, but it's amazing what a better one like yours is capable of.

[@ozzstars_cars]

Yes as technology increases so does the equipment. Even a simple scan tool can be very helpful to diagnose an issue. Thanks for the comment Ken.

[@moparmatt5896]

I got that tool.Ive had it about 2 weeks now.Im not a bit disappointed.It was worth every penny. The quality is great!

[@ozzstars_cars]

Nice!

[@williamdonald8067]

Very descriptive demonstration. I like the printer feature as well with Bluetooth techno. With added virtual analytics to actually see what takes place is a plus. Appreciate the time. Hope you and family stay safe during the Pandemic.

[@ozzstars_cars]

Thanks

[@MrGentleNick]

Thanks Glen. I have just bought an Autel Autolink AL519 OBD II/EOBD Code Reader for me. My local garage has most of the other expensive stuff

[@ozzstars_cars]

In the long run that's the most cost effective way to do it. 👍

[@myleshale995]

Thanks for the descriptive demo. I'm sold.

[@ozzstars_cars]

I think you will like the tool. Good value for the money. Thanks for stopping by the channel.

[@Corey-vb4uc]

Very good job with the video. Very informative and detailed. We are currently pursuing a scan tool like this and I think this might be the one we purchase. Thanks again

[@ozzstars_cars]

The tool is an excellent choice Corey. Link in the description above.

[@EM-df6mo]

This is the final video that convinced me to go ahead on this model. I know that feeling of signing your life away. Mines on the way . Thanks for the excellent video

[@ozzstars_cars]

You're welcome, glad I could help. You will like the capability for sure.

[@mubirukadiri6686]

Thanks, I'm also using 906bt but didn't know how to enjoy some of the features.

[@nocrays3735]

Thanks for the video Glen. Like you I was down in the rabbit hole trying to work out what I needed/wanted. Bit the bullet and ordered one this arvo. I’ve settled on the unit and hopefully will do the trick. Hope you’re well - and love the data vs data comment - always a good one with my yank and Canadian mates. Cheers from Perth Western Australia.

[@ozzstars_cars]

It was so much easier for me to move on once I made a scan tool decision. lol Thanks for your comment mate!

[@CarsExposed]

Hey Glen I came across the same issue printing a report straight from the tool now I know what to do cheers 👍👍👍

[@ozzstars_cars]

Awesome

[@mrbadwrench1320]

Thanks, Great review! Going through the struggle now!

[@ozzstars_cars]

Struggle no more.

[@michaeldlacross1146]

Your video gave me exactly what I needed to make an informed decision thanks. Mike from San Diego

[@ozzstars_cars]

Glad it was helpful!

[@blado3442]

I was thinking If you add a cable to your bluetooth device, it will help you remember to not forget it in vehicles. Or at least your customer will see it and notify you if you do forget. kind of like the one that Launch x431 comes with. It's basically just a short connection between the bluetooth device and the OBD11 port which will turn it into a dongle. Great review very nice. Thanks for taking the time to review it in details.

[@ozzstars_cars]

Good idea and thanks for the positive support!

[@spelunkerd]

Wise words, Glen. I never found a scan tool I don't hate, but the Autel I'm using now, the 906 BT, is the best so far. Dramatically better than the pro version of Autoenginuity. Expensive for a DIY, and only those who spend a lot of time in the shop will find a high level scan tool worthwhile. I knew about the $400/y Autel subscription fee, and the fact the battery is not technically replaceable. I've seen complaints online from guys who didn't renew the subscription, not sure what to make of that. I've had to type in the VIN for most of the vehicles I've worked on so far, which is a little annoying. Also the online forum is poorly attended so there's not much help there. Bidirectional control is much better than other versions, but this Autel version is not as good as more advanced models for programming. I find that to do quick jobs like erasing codes, a smaller scan tool is faster. For an entry level scan tool, people should get live data, but this level of bidirectional control is expensive and not necessary for most home mechanics.

[@ozzstars_cars]

I have experienced scan tools that have lied. Without having a back up would have put me right down the rabbit hole! So far I like this tool a lot. I fact it saved my ass on an '18 GM. Did some recalibration type work I thought I would need a GDS2 for. That alone put a smile on my face. Thanks for your comment.

[@deeeeeeps]

You don't have to pay for subscription unless you want the latest vehicle updates. You can wait 5 years then update it once and when you do you get a full year.

[@ducksRus1976]

Thanks for the video, been going through the same agonizing search to find an advanced bi-directional scan tool and this really helped.

[@ozzstars_cars]

You're welcome Richard. The other day I used the MS906 on a Mercedes E class to bidirectional control a rebuilt a/c compressor that someone less had installed. The Autel came in very handy.

[@stuzman52]

Great job Glen with the explanation and a demonstration of seeing the data when hooked up to a car. And you're right that having a scanner that's bidirectional is the way to go if folks can afford that capability. Ah, I see that you changed your channel name and I'm sure you'll get more car enthusiasts when they do a search. Keep up the good work and have a SUPER GREAT weekend!

[@ozzstars_cars]

Thanks Terry, I appreciate all your support. 👍

[@go5582]

Hi handsome. Great channel and thanks for showing us your receipt. Thanks. Tell us what have you done with your tool and have you repaired the code and vehicle? Thanks.

[@joseclaudio9051]

You forgot to mention(maybe you mentioned it, I didnt watch the whole video) that the scanner has an alert and it bips when you finished the diagnostic for you to remember that the BT connector is still in the car😅

[@ozzstars_cars]

It sure does, good feature. Thanks

[@mrphilbert1]

That standby elevator music is the boss!

[@MERCNRY]

I just purchased the MS906BT and just like you I agonized over which one. I'm am watching your video now by YT recommendation.

[@ozzstars_cars]

The tool is really nice to own.

[@AntonioClaudioMichael]

Autel has the best storage cases for scan tools I have ever bought used they are just amazing

[@ozzstars_cars]

Mine is big! Haha

[@phillipswain4312]

Thanks for helping me make my first major scan tool purchase!

[@ozzstars_cars]

Good luck Phillip. It's a great tool to own.

[@geologic740]

Thank you for posting this video. You covered much of what I wanted to know. Too bad OBD isn't covered. I also have an Actron/Bosch scanner, so that'll have to do for now. I've seen someone attach a rope to the dongle and clip it to the vehicle keys so as not to leave it behind. I'm interested in all the features you find in this unit. Please keep it up.

[@ozzstars_cars]

Glad.the video was helpful Geo. Good idea with the dongle, thanks and I'm sure I will do future videos on this.

[@tenfootvoyager]

Many thanks for very helpful video. Mine arrived yesterday and is now 64g. Also wondered about would I need OBD1 tools. You answered that one. BUMMER! By the way I'm in the UK.

[@ozzstars_cars]

Glad I could help, thanks for the comment mate.

[@DarrenBoxhall]

The holder for the Bluetooth dongle is the big black box sitting on the bench behind you with Autel written on it that you stick it all in when your finished

[@ozzstars_cars]

😂😁😂

[@idpfilm]

Well done Fella - appreciate your time - v. interesting as we are looking at buying one of these units - Thumbs up from us here

[@ozzstars_cars]

I am currently editing footage on the Autel MS908SP that I reviewed. The MS906BT big brother.

[@TheCowgirlNiamh]

Very nice Glen! I'd love one but I get by for now with my VERY basic scanner and multimeter! I get the job done eventually 👍😂😂

[@ozzstars_cars]

Anyway is the best way. Haha

[@weldingjunkie]

Nice job Glen I was thiniking about doing a video on mine as well. I sold my elite and im508 and Autel picked up and switched to new owners in a few min. I’d like to show the diff between all mine and value etc. Again nice job ... Jay

[@ozzstars_cars]

I like the 906BT so far. Thanks Jay for your comment.

[@33elmore]

Great video sir, I currently own the mk808bt which is a cheaper model and it can also do a lot for the price. I am fairly new to using professional scanners and still have a lot to learn from them. I am actually thinking about to step it up a little bit and maybe get this one, but I am not too excited about the pricy upgrade, after the one year for free. Lol

[@polymetric2614]

my biggest complaint with the 808 is that in wireless mode the live data speed is significantly degraded. it makes live data in wireless mode barely usable, and live data is pretty much the main thing you'd want to use wireless mode with anyway. so i'd only barely even consider it a wireless tool

[@padraiggalvin2807]

Thanks for going to the trouble of doing all this. good review

[@ozzstars_cars]

Thank you, glad the vid was helpful.

[@SmittySmithsonite]

Same as mine, aside from the lack of the tire sensor tool. You got a WAY better price than I did, though! Mine was $1,600 back in '16. That stung a little ...😬

[@ozzstars_cars]

It's a good tool for the money.

[@SmittySmithsonite]

Ozzstar's Cars - Oh yeah, no doubt about it. One of the best purchases I’ve ever made for the shop. 👍

[@mikekorman666]

Thank you for this review... I just ordered one yesterday and it should be delivered some time tomorrow Your review helped me make my decision

[@ozzstars_cars]

Great tool for many applications. Glad the video was helpful. -Glen

[@davidrte.664]

Great video really helped

[@Rakatawhat]

Thanks for the vid!

[@monkeyrotary6979]

I am on the ropes about the autel and the 7111 innova

[@ozzstars_cars]

Decisions, decisions

[@Toys4Life]

Love the vid - thank you! Question: I can get the MS906 (requires cable connection) for $779 from JB tools or the MS906 BT for $1179. For the $400 difference as as part time one man shop- I think the MS906 is a better deal - Do you agree?

[@ozzstars_cars]

Personally I like the wireless system having the flexibility to do testing under the hood or under the car remotely but for $400 less that's tempting.

[@Toys4Life]

@@ozzstars_cars Thanks man, appreciate your taking the time to respond!

[@erictech201]

Cornwell truck has them for 1600 bucks! It’s a Good deal so I purchased the same one you have can’t wait to use it

[@ozzstars_cars]

Enjoy it. Let me know how you like the scanner.

[@moparmatt5896]

Well sir ive studied long and hard to find an affordable scan tool .and i also took the plunge and just ordered an ms906bt should have it in a few days . these products get pretty good reviews and ofcourse autell says its a very capable tool im glad i found your channel so as you progress with yours im hoping to break in mine .maybe well pass notes! I plan on putting it through every pace i can well see what happens. Hopefully its a worthy investment

[@ozzstars_cars]

Yes definitely. So far so good. The scanner has it's limitations but that is to be expected. Let us know when your new toy arrives. 😉

[@jimjohnson9079]

Great video. I love my ms906bt. I have had mine for a couple years but you still showed me some features I didn't know.

[@ozzstars_cars]

That's awesome.

[@Triplemyworth709]

Do you have to use the Bluetooth or does this version come with the wired obd port as well?

[@geecrawdad]

Anyone thinking about this one - I've been watching amazon for the past week because of the $255 off the $1269 price. Just couldn't pull the trigger so I was leaning toward the MP808K at 20% off. Anyway, yesterday I pulled up the 906BT page and it said "lightning deal" and the price was reduced to $1078 and still with the coupon for $255 off. So I bought it for a total of $880 with tax included. You also get the 5% back on your amazon store card so that's another $40 which brings the total down to $840. I don't know what triggers the lightning deal. Maybe it's just visiting the page several times a day and some algorithm brings it up. And don't know if it's one particular seller - mine was from Autel Choice - but I doubt it cause they all seem to control the price pretty well and all from China. Anyway, looking forward to mine. However, not looking forward to explaining to the wife.

[@ggrthjjhgyjllffdhjkujbty5027]

Nice steal

[@santanaurias3112]

Where was the $250 coupon from

[@geecrawdad]

@@santanaurias3112 That coupon was from Autel I guess and it was there about a week before Father's Day. And it was the MK906BT

[@jameskeeler6321]

Important! Have a small printed message on the top of you scanner that reads "remove Dongle". It only takes one time to forget your dongle is still connected in the customers car. It is either lost forever, or it requires and embarrassing call to the customer.

[@ozzstars_cars]

Exactly! We've all been there.

[@THEBOSS-vn2ky]

Thanks KID. Good video.

[@ozzstars_cars]

You got it Boss.

[@NickKoll]

Thanks buddy, I'm buying one and you really help me!

[@yeahno2238]

That dub tripped me out for a second

[@dougdays8095]

That was the best scanner video ive seen.. veryy informative!

[@ozzstars_cars]

Thanks Doug!

[@HowtoAutomotive]

Awesome video Glen. Very helpful I think for those guys out there looking for a tool this would be a good one👍

[@ozzstars_cars]

I appreciate you feedback and agree it's a great tool for the price.

[@HowtoAutomotive]

Ozzstar's Cars Like the name change👍

[@ozzstars_cars]

@@HowtoAutomotive I finally pulled the trigger and went for it. 👍😬

[@HowtoAutomotive]

Ozzstar's Cars I saw that you want to head and ripped that Band-Aid off. Lol

[@phuongon8837]

Very informative, thank you for sharing. I will be ordering one!

[@ozzstars_cars]

It's a very good tool. Thank you for your comment.

[@AntonioClaudioMichael]

Great video Glen

[@RustyGlovebox]

There are so many choices out there now. All can do so many things they couldn't do a few years ago.

[@ozzstars_cars]

Yes it has

[@MichaelVictorious]

I can't thank you enough for this video. I will be ordering one today.

[@ozzstars_cars]

Have fun!

[@MichaelVictorious]

@@ozzstars_cars Just got it yesterday. Gonna play with it today 💪

[@markyormark7747]

You definitely are helping me select a bi-directional scanner. I have a 2005 C6 Corvette. I removed the LS2 with all that makes it function because It is now a a battery electric vehicle. However I want to maintain the usable functions of the C6 body control module. I am not in the business so I only need a bidirectional scanner for this vehicle. Any suggestion on a scanner where I can have a custom flash of this body control module?

[@ozzstars_cars]

You will need a J2534 box which the 906 does not support. The box is necessary to do a pass through to do any programming or reflash. I will be shooting a video soon on the MS908S Pro which has a J2534 but I have not yet tried to see if it will program a GM product.

[@rodneyswailes3161]

works great also will work with a laptop. It uses Hantek leads. Bought the amp clamps. They come with short bnc leads so bought 6' extension leads. Very easy to use and figure out how. Only thing is you need to know good pattern to compare on some tests.

[@lielyncher755]

Mine is on the way , should arrive soon from Amazon. Iam so tired of abs lights and key immobilizer issues forcing me to send my customers to the wolves. Shame on me, should've made this purchase at least 10 years ago. Cant wait to bi direct my way to faster diagnosis ect....ect....

[@ozzstars_cars]

It's a very useful tool. It has helped me diagnose issues much faster and easier.

[@lielyncher755]

Thanks for this video sir. Subscribed !!!

[@SunnybraeCroft]

Thanks for the information, very interesting

[@ozzstars_cars]

You're welcome Hugh

[@ironmanonaninja3025]

Love the video. Can I adjust idle speed with this?

[@bryantoth5249]

What’s up? I went thru the same decision making process. It was between that Autel and the Launch x431. The Launch seemed sketchy. Think I made the right choice. Delivery on Tuesday.

[@ozzstars_cars]

👍

[@raula.h.chagoya8526]

thanks buddy, perfect review.

[@ozzstars_cars]

Glad you liked it!

[@Fuaarrkk]

Excellent video! I’ve just started my own workshop and was looking for a cost friendly scan tool that can do just about everything. I’ve subscribed

[@ozzstars_cars]

It's a great scanner for the money.

[@Fuaarrkk]

@@ozzstars_cars do you still use it and have you had any issues with it yet in terms of software capabilities? Have you had to contact customer support for anything and how were they to deal with? Sorry for all the questions haha

[@ozzstars_cars]

@@Fuaarrkk I use it often. No software issues and customer service has always been good. Of course my tool is USA supported. I now also own an MS908S Pro which I will be filming a video on soon. Many of the same qualities but has programming capability and a little bit bigger screen.

[@Fuaarrkk]

@@ozzstars_cars that’s one thing I’m worried about is I need access to Australian domestic vehicles aswell and I just wasn’t sure that the ms906 would support that. I’ve emailed the company though I’m sure I’ll find out soon enough. I look forward to seeing you’re other video mate! Cheers for your help! 🍻

[@corthirteenth94]

Wonderfully thorough video thank you!

[@ozzstars_cars]

Glad you enjoyed it!

[@corthirteenth94]

@@ozzstars_cars I'm considering getting a 906BT or an Elite. Did JBTools sell you the correct North American version?

[@nahomelias3549]

Really very helpful tool .Thanks.

[@ozzstars_cars]

You bet!

[@jimthecarguy]

Getting the right scan tool is important. It's not good just to buy one because it is cheeper.

[@ozzstars_cars]

True, get what you pay for most times.

[@monkeyrotary6979]

Question on the report. Is it shared with 3rd party companies? Or is the tablet not connected to the internet?

[@ozzstars_cars]

The scanner does not need to be connected to the internet to function properly, onl for periodic updates.

[@MrTimdtoolman1]

Thanks for the info. Great vid, I enjoyed watching it.

[@ozzstars_cars]

Good news Tim. Thanks for your comment.

[@toews15]

Hi Glen,, thanks for the video I am debating between autell or launch, that video was very helpful.

[@ozzstars_cars]

Your welcome. 👍

[@EATSLEEPFARM]

I’m in the same boat you are which one did you go with? Thinkin this or the launch x431

[@luizreyes9171]

Great video 🤘 very helpful.

[@ozzstars_cars]

Thanks, glad it was helpful.

[@keiths4573]

Great video u don't get to many people that will help like that and I need to understand them better. My question l think I already know does this unit have troubleshooting section like Snap on units. Thanks

[@ozzstars_cars]

Not on this model. Only wifi to look up information via the internet or a paid service like Alldata or Mitchell

[@Batman31112]

I don’t have this tool. But I do have a 2000 BMW 323i with both the 16 pin OBD port and a 20 pin port under the hood. I have Maxidas D708 looking to upgrade it but that’s not the point I’m making. When I scan my car though the BMW app it tells me if there is a 20 pin port to us the 20 pin and not the 16 pin. You can still us the 16 pin if you want but there is a catch. On my BMW with both 16 and 20 pin ports. Using the 16 pin OBD port turns your fancy diagnostic tool into a code reader. And using the 20 pin port gives you access to all the modules the vehicle has onboard. So that is why the tool has the extra connectors and that is what they are used for.

[@ozzstars_cars]

That is correct with the obd2 BMW's.

[@Batman31112]

There are more out there then just BMW. Some makes just like the BMW still used there proprietary ports after 96 but still put a 16 pin port under the dash to read basic codes to be in compliance with the standard or law. What ever it is. For example take my 2000 E46 323i and compare it to my cousins 05 E46 330i. Same generation of car. Same body style same series but his does not have a 20 pin port on it at all. I get all the modules and information from the 16 pin OBD. So it just really depends on the manufactures date on some makes.

[@rustamasamov6097]

Thanx for video,man,were did you buy the scanner from if not secret?

[@ozzstars_cars]

Email me [e-mail]

[@alisabah7815]

You are super greeting from Iraqi

[@dashtyATG]

It was really helpful as I'm about to get 1 thanking you always from kurdistan iraq.

[@erictech201]

I just ordered mine same one he has so hopefully I like it haha 1600 bucks it’s on a deal right now on the Cornwell truck

[@amirjezrawi8491]

Thank you so much for your information I am really appreciate it

[@ozzstars_cars]

You are welcome Amir.

[@captainron7904]

Thanks for the video does it make or copy keys for any vehicles

[@ozzstars_cars]

No it doesn't.

[@ivettevestfal6559]

I have a 91 corvette and would like to use it on that car. The old snap-on mt2500 will work so I could go that route.

[@ozzstars_cars]

This tool does not support GM OBD1

[@duanedragon2]

Good job Bud. Nice video.

[@ozzstars_cars]

Thanks Duane

[@hughjass5918]

Have you tried the Bi-Directional/Active tests yet? I'd like to know if it can activate servos and solenoids.

[@ozzstars_cars]

I sure have. Works like a champ on many applications. Controlled a Mercedes a/c compressor today filling the system with freon.

[@Grixotz]

Great real-life review, thanks!

[@ozzstars_cars]

You're welcome, thanks for the comment.

[@MrBchott]

If u have a wireless/ wifi printer you can send file straight to print once both on the same wifi network ..

[@ozzstars_cars]

You are incorrect. Autel scanners can not send files directly to a wireless printer. Software needs to be installed onto a computer to act as a gateway which the scanner will use to print.

[@wassimoussedikou4378]

That was so great. Thanks so much

[@ozzstars_cars]

You are welcome.

[@qtig9490]

Great review tanks for posting! I am looking for something beyond the $30 one way tool for something that gives bidirectional control and with more detail, while not wanting to drop $10k on a Snap-On full up system. This looks like it might fit the bill for me. The price is about right - if it saves me from going to the dealer even a few times it paid for itself. One question I have is does this thing by any chance have the wiring diagrams for the vehicles?

[@ozzstars_cars]

No it doesn't have built in wiring diagrams. You can access the internet feature and join sites like alldata or Mitchell for wiring diagrams, or look it up on Google.

[@TinkleBotv]

Will it track live data of number of misfires and which cylinder they are coming from? Also, will it do throttle and other re-learns?

[@ozzstars_cars]

Yes it can depending on the year and make of the car.

[@garyschmitt5843]

Hello Glen, Thanks for the review of the ms906bt. Did you buy the scan tool on the JB tools website? Thanks