P 51D Mustang Revell 1/32

In today's video, we will build a P-51D Mustang plane in 1/32 scale from Revell company. I will show you how to improve the wheel bay with wires of different diameters and how to indicate unevenness on the surface. That unevenness stands out in Natural Metal Finish. I used metallic colors from the ISI series Super Metalic, Alcad II, and Xtreme Metal from AK interactive. I also show you how to remove the topcoat from Eduard decals
Hope you will enjoy the video.
Model by Josef Choren
Music by tunetank.com
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...

[@mazinman3]

You took a pretty basic Revell model & turned it into something quite impressive. I think that’s the best P-51 wheel well I’ve ever seen, & your stressed panel look is right on the money. Well done!

[@johncahill3644]

I really like your idea of using heated cotton swabs to make thin tubing. Very clever, thanks!!

[@toddel2010]

To make the surfaces uneven is a completely new idea for me. Chapeau!

[@phantomTomcat1985]

I really appreciate the effort you made to label the colors used and the *exact* sequence and locations used. Super useful, which more youtube modelers made that effort

[@JuanGarcia-up2gz]

Awesome build my friend keep up the good work

[@howardcobb4354]

Amazing attention to detail - requiring considerable skill and infinite patience. Superb.

[@Juno58]

Best 32nd scale Revell Mustang so far. Great job! 👏👍

[@martinoude-vrielink7956]

You turned it into a beauty.

[@SirJohn2024]

First time I saw the scalpel trick... Beautiful...😎

[@zbysekbabka6618]

Ahoj.Toto video stavba Mustangu mě dost bavila. Práce s rozvodama kapalin a podobně, je pecka.Revell jsem dostal Taky- Mustanga P51 D - 15, od spolužáka,nechtěl model zkazit,tak mi ho věnoval, Pravda je že kolem toho modelu chodim PO ŠPIČKÁCH A NAŠLAPUJU HOOOODNĚ OPATRNĚ, 😂 .... Tvoje video mi hodně napovědělo,JAK A CO. MUSTANG TI MŮŽE PODĚKOVAT, TAK ÚPLNĚ JEJ NEZKAZIM. 😮.. BARVIT BUDU AMO MIG ALKLAD II... a děkuji za videa s titulkama v Češtině.

[@laMoort]

master craftsmanship and top notch result! 👍

[@douglasstreet7304]

OUTSTANDING !

[@ralphford4302]

Great job. I agree, your attention to detail is incredible and loved the tip on how to create the variations in the fuselage

[@georgeb2616]

I think, like previous posts on here, that the "uneveness" makes your build look even more impressive, as a mere mortal I can only aspire 😊 thanks for sharing.

[@mark109s]

Amazing work. Enjoyed the whole video. Thanks.

[@markspencer8609]

i have 25 of this same kit done in the 357th fg and not 1 has come up as stunning as this .unbelievable detail and steady hands . you the man

[@pheasantplucker8183]

Excellent build

[@brandtall9639]

Excellent skills and detail representation. I love this kit and watching you build it I had to remind myself it's a Revell. Loved the video

[@danwilliams1686]

Wow! Perfect. I wish my hands still worked correctly to replicate your gear well plumbing. But your info on the rest of the model will help up my game, thanks.

[@dfens666]

Stunning job! Your attention to detail really paid off with this kit.

[@garrithjoynt3018]

Inspiring! Great build and vid. Thank you!

[@LZScaleModeling]

Great job. The painting process is a master

[@stevenpuderbaugh821]

Your work in adding detail is quite intricate. The results are superb. Your video is quite informative. Thank you!

[@basfinnis]

What a lovely finish. So much detail 😘

[@tonygary7611]

Amazing job

[@davidpowell6098]

Absolutely fantastic work, well done, and thank you for all the hints and tips included within.

[@jr7392]

Beautiful build! Also brilliant idea with the melted cotton bud stick to get tubing. Of course melted sprue is obvious but hadn't thought of that way to get tubing, thanks!

[@davidnash1220]

That is ART absolutely fantastic Super Super cool what a finish

[@kennethfink7060]

Great skills! Your panel stress warping and painting has taught me alot, and I've been building models since '68...amazing work and attention to detail !!

[@mikebaginy8731]

WOW!! What a masterful build, absolutely stunning. I especially like the uneven panel surfaces - very realistic!

[@milannes1574]

super stavba a je vidět progres i v prezentaci, palec hore .... děkuji ... výborná inspirace

[@milannes1574]

jen bych u těch barev doplnil i textem o jaké barvy jde - odstíny, třeba na malém notebooku to musím pauzovat a někdy i dost luštit :) ale velkej progres :)

[@DetailsScaleModels]

OK, přístě doplném číslo byrvy. Díky

[@stephenmcdonald7908]

Absolutely amazing 👍

[@jackmunday7602]

I have seen countless Mustang builds. But is with out doubt the best one yet. It looks so lifelike and realistic. I particularly loved the different metal colours you used to give an incredibly vivid finish. I must find a way to learn your supreme skills.

[@madaprak]

Excellent!

[@Bryan-cs9to]

Excellent work I really like the surface texture you added to the aircraft skin

[@mikehynes6632]

Incredible work, Incredible realism!

[@richardrosenau9292]

OH now that is just cheating using a QTIP tube to make miniature plastic TUBES! I knew to do this with solid plastic kit sprues for cheap rods... but this TUBE idea is a new trick for this 50 year old dog.... lol Great job and and thank you

[@DetailsScaleModels]

I have been using it for more than twenty years. And I'm still satisfied ...

[@tompintamini7722]

@@DetailsScaleModels There are NO Plastic Tube Qtips available in Germany any more.. all Paper tube... have to watch out where to get an alternative..... :(

[@mikeslattery8715]

Over the top, outstanding modeling skill!

[@jackfrost9164]

I like your videos and how you explain and show how your doing the build and with what your using.

[@modelfun]

This is great. Amazing piece of work.

[@modelfun]

Question. You mentioned using a lot of different metalizers. Did you protect the surface after applying one with a clear coat, before masking, and other paints application?

[@SprueFascinationChannel]

Assembly, stressed skin, weathering - top notch job!

[@thethirdman225]

“Panty Waste”? Classy… Great job though Josef. That wheel bay detail and the metallic paint… you’re a master of that.

[@enricopandiani1852]

Unbelievable! You're a mastermind!

[@АлександрСоболев-с1ы]

Бомба! Есть чему поучиться!

[@audreyderedon3793]

Masterpiece great job

[@defdef6230]

excelent built... master skills! cheers from Argentina

[@СергейАртёмчик-ю5н]

..ШИИИИИКАРНОЕ ВИДЕО!..

[@bastiandijkstra6832]

Excellent result! And learned a lot of tone variations

[@HobbyLinkInternational]

That is one impressive build and a sweet looking plane.

[@americanpatriot2422]

Another Outstanding video and presentation.

[@neboskii8756]

I love how the music matches the speed of the montage

[@lewistaylor1965]

Brilliant...Thank you for the colour labels...The whole video is really helpful....SUBSCRIBED....and....LIKED

[@stephenbridges2791]

Very nicely done.

[@michaelbottomley2520]

I lovely job you have made of that my favourite aeroplane

[@dmb531sull]

Unfreaking believable you Sir are a master at your craft I only wish I could do that I am a beginner at modeling and hope some day I can do something like that

[@jasonbexton4969]

You have got mad skills mate well done

[@Forestowo]

Great build and vid!!! Thank You :)

[@alexandremarcelino7360]

Incrível! Ficou muito legal muito bonito! ⭐

[@Jelly-B]

Yet again another top looking build. I think your just showing off now. Keep up the great work your making my skills look poor

[@johnprice7303]

The 'panty waste' name on nose has me all agog, the mind boggles!

[@gianluigimarino8264]

A very great job. 🤩🤩🤩

[@Garywolff884]

Superb

[@janehill9764]

they're called struts, not shafts. To be precise, landing gear struts, or landing gear. BUT: you are a fantastic modeler...fantastic!!

[@lechpierchaa7041]

Wow!

[@HeirweghB]

Great build with many interesting tips; but with enoying music (muting is the solution 😁). This build shows that you don't have to buy the very expensive Tamiya kit to create a possible show winner! 👍

[@fatcat3211]

awesome build!

[@mahna-mahna6408]

Really loved your improvements on landing gears and structural effects on surface. It's a pity manufacturers don't make rivets anymore, especially at this scale. Would you consider the Ki-61 with engine under maintenance ?

[@DetailsScaleModels]

Thanks for the feedback. Ki-61 would be interesting, I'll think about it ... But in the next plan I have Hs 129, P-47 and A6M5 in 1/32 scale.

[@mahna-mahna6408]

@@DetailsScaleModels More cool stuff :)

[@Planehazza]

Damn I miss this hobby. I was quite good at it too :(

[@vichetdragoncars3186]

Excellent

[@user-fh3mb3hx9pscorpios]

Very nice 👍👍👍👍👍

[@johnrettig1880]

Suggestion When I use metallic paints . Even though it looks dry , I use White Cotton Gloves to prevent oil from my skin to get on the paint and interfere with the next step . I use to build kits for people who didn't have the time or talent and for several displays for military museums . But in all of my years of model building experience this is the first time I've ever seen decals with a removable top cover .

[@dunbar555]

Amazing

[@grzegorzinczewski4130]

Piękny...

[@garybaird9423]

Great detail, beautiful model, where do you get the plastic Q Tips that you used on the wheel bay, I can never find them

[@DetailsScaleModels]

Thank you all for your feedback. It's an ear brush. Instructions and modification are in the video.

[@johnrettig1880]

Your underside Photos look like normal hydraulic leaks acquired during combat maneuvers . I once did a series of Ravel 1/48 scale SR 71's for a friend of mine who actually worked on them before they were decommissioned . The thing is that I gave them a lite wash before I packed them up to take them to him . He actually let me use the same paint booth used for the parts of the real SR 71's and other US Aircraft . Well I forgotten to double check the models before I started to spray the last coat of flat clear and trapping some calcium deposits on the underside of the models . Afterwards I placed them back in the box and left for his team office . When I started to unpack the models one of his team was shocked to see the calcium deposit groupings on the underside of the model . How the hell did you do that ? ? ? I spent the better part of a week scraping the underside of that craft and this looks exactly like what I was working on . How the hell did you do that ? ? ? He never did believe that it was an accident . Next they ( the entire team including the buildings CO ) took me over to see an SR-71 that was having the same repair job done same as the previously mentioned and although it wasn't calcium deposits from water but Fuel and hydraulic leaks and compared to pattern on the model to what was on the other side and yes they were pretty much identical . So long story short ( ha ! ha ! ) . Sometimes a little bit of over do will give you a surprise result when compared to actual combat photographs .

[@AussieScaleModeller]

Mate I am in amazement at your wonderful Skills I have been making glue bombs for 48 yrs and wow cheers from my Channel To Yours, Jason, AUSSIE SCALE MODELLER" And I Had to Subscribe wow and thank you again

[@flyboyu777]

What is your preferred adhesive for the plastic parts? I've had mixed results with some of the CA and plastic solvent, usually causing a level of frustration at how slow they bond.

[@DetailsScaleModels]

Thank you all for your feedback. I most often use MR.Cement S glues from GSI and Tamiya Extra Thin. I glue the small parts with instant glue. But I try to glue the main assemblies with Revell Contacta and let them dry for a long time (1-3 days).

[@flyboyu777]

@@DetailsScaleModels thanks for your input-I’m going to try those products!

[@pierrepaj2367]

SUPERBE BOULOT ,c'est plus un Kit plastique ,c'est une OEUVRE D'ART .

[@trevorgwelch7412]

I would like to see you take a G Scale Steam locomotive and do major weathering as if it was its last year in service . Super Weathered

[@DetailsScaleModels]

It never occurred to me to build a locomotive. I will think about it...

[@trevorgwelch7412]

Q : From your perspective what brand name of scale models is the best quality , details . ?

[@DetailsScaleModels]

Thanks for the feedback. Definitely tamiya, but it is more expensive...

[@trevorgwelch7412]

@@DetailsScaleModels ok 🏆

[@panpesek8036]

fajne na revell

[@CaptSolo1977]

What size of wire did you use for detailing the landing gear bay?

[@DetailsScaleModels]

Thank you all for your feedback. Different diameters. I think 0.3 to 0.6 mm.

[@АлександрСоболев-с1ы]

Вопрос: после металликов покрываете лаком перед приваркой декалей?

[@DetailsScaleModels]

Я наношу лак до и после декалей.

[@michaelsippel3729]

Top no Coventry best top

[@paulviner1159]

Loved the video, the only issue was the 70s porn soundtrack, the wife didn't believe I was watching a build video and accused me of watching vintage porn 🤣

[@DetailsScaleModels]

🤣🤣🤣

[@kenfairbrother6737]

Your video is great! Thanks for the enlightening tutorial. I thought your background music sounded like a bad porn loop . Maybe something else next time, maybe nothing.

[@charlesgreco6964]

Nice video but the music is so annoying.

[@robberes6799]

Too bad Revel (crappy kits) doesn’t take the time Tamiya does in engineering!!

[@DetailsScaleModels]

Thanks for the feedback. The price of the model is also an important factor. Tamiya is several times more expensive.

[@robberes6799]

@@DetailsScaleModels Get what you pay for. I’ll never buy another Revel kit. Spent too much for poor engineering!

[@johnshallman508]

Arrrgggghhh. You went to all of that trouble to fantastically detail the wheel bay, natural skin surface, different panel shades, etc and then didn't fill in the panel seams on the wings. NO P-51 had visable seams on the wings except for the gun bay, access panels, and cover over the landing gear mechanisms. They were all filled, sanded, primed, and then painted (wings that is). There are NO different panel shades on the wings. The paint was an aluminum laquer. Fuselage is correct.

[@rickmoreno6858]

Wait how did you use that mr. Hobby glue the blue cap, without screwing up your clear Parts you canopy? Because I've used that same exact adhesive glue on my 1/35 clear parts and it has gave him a cracking look crazing look and I barely touched it to make sure it was glued in place. How did you do that? Cuz I know I've used tamiya extra-thin in the head really screwed up my clear parts but I seen you in many other KZbinrs music seem mr. Hobby blue cap glue on clear parts with no issues

[@DetailsScaleModels]

Thank you all for your feedback. Mr.Cement S and Tamiya Extra Thin glues have different characteristics. I use both, but only Mr.Cement S for canopy. The parts must fit perfectly. Do not press on the parts. Lightly pour a small amount of glue into the joints.

[@theandy0311]

Good video! Please lose the music!