I maintain my son's 2013 Malibu with a 2.5L NA engine. This video gives me confidence that I can remove and reinstall the throttle body even though I'm an inexperienced DIY'er. The Amazon links are very helpful. Thank you for your clear instructions in this and all your other videos!
@backyardchevy3283 жыл бұрын
So glad to be able to help🙂 thank you
@supindergill48452 жыл бұрын
Thanks for the video. It works, i just did that to my 2016 Malibu. Everything is good now, engine light gone. Thanks again.
@backyardchevy3282 жыл бұрын
Thats awesome! Great job🙂👍
@p1epoppa7 ай бұрын
Top shelf video. There aren't a lot of moving around, shaky, and dark video shots. We could definitely learn cars and production from watching your content.
@Vjl52802 жыл бұрын
2015 Malibu 2ltz is idling low while stopped like it’s wants to die. I’m sure this will fix the issue. Thank you for the video.
@kenetrai35262 жыл бұрын
Did it fix it?
@justicesmith40644 күн бұрын
How easy was it to rotate to get the clips off???
@AlejandraLizalde-v6l Жыл бұрын
Hola ! Tengo problemas para quitar el tubo con rosca , que otra opción tengo ?
@elpadrinodat92 жыл бұрын
Can you make a new video on 2014 Chevy Malibu LT showing exactly which screws to remove (POV) please? My throttle body needs cleaning bc my Malibu is starting to kick/hesitate..
@emanuelflores5062 Жыл бұрын
Thank you so much excellent video , I can remove and reinstall the throttle body ,engine light is gone my 2013 chevy malibu 2.0 turbo.
@tomahawk59592 жыл бұрын
It is a very good idea an least expensive it work for me you have to remember it's a 2008 cheve
@backyardchevy3282 жыл бұрын
Thats great!
@Htown713southside3 жыл бұрын
Hey, I took mine off but it wouldn't close all the way after cleaning it, did I not clean it right and do you need to calibrate it when you put back on? Thanks and nice video.
@backyardchevy3283 жыл бұрын
Did u clean it on the car or off the car? Was the electrical still connected if on the car? I believe i mentioned the calibration steps but theyre just a few turn on and idle for a few then turn off steps
@Htown713southside3 жыл бұрын
@@backyardchevy328 I removed it like you did in the video, but before I did anything I disconnected the battery. Mine is a 2015 Chevy Malibu Ls, the throttle body is in the same spot. Thanks for responding.
@backyardchevy3283 жыл бұрын
@@Htown713southside was it stuck open the same way before cleaning or it happened after?
@Htown713southside3 жыл бұрын
@@backyardchevy328 I believe it happened after, I'm not so sure, because there was oil gunk right where it was opened so I assumed cleaning that would close it but it didn't. But I'll check it again today during the day. I really don't want to buy another one but if I can't fix it then I have too.
@backyardchevy3283 жыл бұрын
@@Htown713southside hopefully u can..normally when u connect the power back up itll close it..maybe doing that u can see if it closed it
@hitmanm8182 жыл бұрын
I'll be using this video today . It looks hard to reach the malibu, unlike my tahoe
@backyardchevy3282 жыл бұрын
Yea that ones definitely harder to reach than the tahoe's...hopefully all goes well...good luck🙂👍
@NadeemAhmad-nd4fj10 ай бұрын
Where can i find those retaining clips
@Julio_RuizH Жыл бұрын
The steps to calibrate it are: turn it on for 3 minutes, turn it off for 1 minute, turn it back on for 3 minutes, turn it off for 1 minute and that's it. it is right?
@JoseCruz-dm6ew3 жыл бұрын
I did this today on a 2.5 liter, same year. No code, but would stall when idle at a light. This fixed the issue. 🚗
@backyardchevy3283 жыл бұрын
Thats awesome...so glad to hear it🙂👍
@stayworkin34422 жыл бұрын
Mine is doing the same thing. No code but stalling, replaced the VTT solenoid and that did not fix it. Going to give this a try.
@elylunatoma2 жыл бұрын
Can you a video on cleaning a throttle body of Chevy Malibu 2014 step by step please
@backyardchevy3282 жыл бұрын
It would be the same process as long as its the same engine the 2.0t
@TerrellSpivey Жыл бұрын
Wait a min!! Aint no way its that easy!? Lol The Chevy dealer saying my wifes car needs fuel injection and throttle body clenaing, and this is all they would do for 200 dollars!!?
@aeonnightdeath13 жыл бұрын
Great video.
@backyardchevy3283 жыл бұрын
Thank you🙂
@CrazieFrogz3 жыл бұрын
I change the mass air flow sensor after check engine light. Car was jerking some when taking off at lights, hesitation & just notice once changed it all was good. 48 hrs & then it through another engine light. P1101 .. AutoZone..recomend tal deice air intake ... Our filter was extremely dirty. Didn't find any leaks or. Blockage. Car is running fine. I changed air filter... But light still on ... Is there a way to reset? Can a really bad airfilter do this?? We homeless. Are car is our home. & no family so this really hitting us with money we've manage to save from doordashing.
@backyardchevy3283 жыл бұрын
To reset it..disconnect the negative terminal for 15-20 mins..p1101 could be many things yes from an air blockage but filter would have to be really really dirty..have u tried cleaning the maf sensor? If thats dirty it would also trigger that code..youve looked for air leaks so thats good u didnt find any..i would try cleaning the maf sensor..i got a video on that as well
@CrazieFrogz3 жыл бұрын
@@backyardchevy328 i put in a new MAF. Before this bc it through a code before this one. I should of known to change filter you know how you don't listen to gut instincts. Well i didn't bc money tight. Won't do again. Through the code today & i changed the filter & 4 hrs later after driving around & multiple on /off's the light went off. :) so I'm hoping its fixed.
@backyardchevy3283 жыл бұрын
@@CrazieFrogz hopefully it does..good luck🙂🤞
@CrazieFrogz3 жыл бұрын
@@backyardchevy328 i think i held my breathe to long. 😆 pulled out this morning & something. Check engine light. (P1101 intake air flow system performance).. Cars running fine.
@CrazieFrogz3 жыл бұрын
Well i did what you did 😆 few wks & its back. .. Any idea what next?
@stephanie83272 жыл бұрын
I removed the throttle body snd cleaned it good. Replaced the gasket and put everything back. Now it won’t recalibrate (I’ve tried EVERYTHING) and now I have a lean code p0171 . I’m so frustrated
@backyardchevy3282 жыл бұрын
The intake tube clicked back on properly and locked in place? If it has a vacuum leak anywhere between the maf sensor and the throttle body it could cause all that
@stephanie83272 жыл бұрын
@@backyardchevy328 yes , everything replaced and secured. I was thinking it could be the gasket I replaced but I just don’t see how I could mess that up. It only goes in one way then bolted the TB back on over it. I removed it and checked even tried putting the old one back in. No dice. Had no codes before. Thought I was doing a good thing by doing some maintenance on the TB and now here I am 🤡
@backyardchevy3282 жыл бұрын
@@stephanie8327 maybe its something else thats causing the code, on the same 2.0t i had to replace a pcv tube because they tend to crack very commonly causing the same p0171 and maybe thats triggering the same code
@stephanie83272 жыл бұрын
@@backyardchevy328 thank you I’m gonna go check that today ! Thanks for your quick replies 👍🏼