Paano gumawa ng Lithium Battery Pack gamit ang lumang 18650 Cells

[@tulitzagasi2325]

Inaabangan ko yung pag testing mo ng Battery na yan hehehe

[@aretaerwin6703]

Thanks God, your back Lagi ko po inaabangan ang mga upload video mo, Sir. Marami po ako napupulot na kaalaman mula sa mga videos mo, Sir. Mabuhay ka po & God bless

[@greenyelectronics]

Thanks for watching din po 😊

[@nilocosmeph6082]

newbie is watching master

[@greenyelectronics]

Thanks for watching po master

[@fixnreview]

Welcome back Sir! Good evening

[@greenyelectronics]

Thank you po ☺️, sobrang busy kasi sa work

[@taejinjin9722]

Maganda to pang all around powerbank pwede sa wifi tas bumili kalang ng additional na step down converter meron nabibili sha shopee na umaabot ng 65watts

[@Rieyt24]

Isa po ako sa taga subaybay dito sa isa kung KZbin account sir. Nais ko po sanang malaman kung ano ang pang spot weld nyo po at ano ang mga parts nito. hopefully po makakuha ako ng tamang guide ng spot welding tools para maka gawa din po ako ng tulad sa inyo. Thanks po.

[@greenyelectronics]

may video napo ako about sa mumurahing spot welder po ☺️

[@janmac5491]

Sir.pwde Explain ang transistor coding.

[@leomercs4872]

pa link naman po ng repacker na gamit nyo. salamat

[@thegala-xy7928]

sir if walang nickel strip. anong wire size pwde ipang series at parallel 4s10p thank you

[@greenyelectronics]

kung wala po talaga copper wire nalang, kaso magsosolder kapag copper wire, bus bar style nalang po ang gawin nyo with fuse each cell

[@RowellPaguia-uv2bm]

Sir Anu Po cover na nlagay mo

[@adflex986]

Sir gawa ka naman ng 6s2p 24v kung paano connection sa bms.

[@greenyelectronics]

ok po soon po,

[@christopherjohnsumngat1322]

Hi po idol gusto ko mggawa ng 48v ba bateri tas ilalagay ko sa xiaomi ko na body tas kugoo engine gamitin, ilan bateri kya yun na 18650?

[@cubitaid2454]

Sir, pwede magpa assist sa 52v 30ah ko na pack of 2. san kita pwede reachout. Thank you.

[@roginelvicente992]

sir ilang mah yan at ilang amps bms?

[@roginelvicente992]

sir na test mo naba kung ilang hours itatagal nyan?

[@jamesabara5082]

Sir ano pong maisadjest na appliction ng repackr para sa cp. Sir?

[@greenyelectronics]

dati andami pong apps sa android pero ngayun pahirapan napo kaya pc nalang po ginagamit ko

[@jamesabara5082]

@@greenyelectronics un lang wala akong pc sir.. hay sayang naman...🥺🥺🥺🥺

[@khalidadap2250]

Pwede po byang gamiting pang battery ng motorcycle idol

[@greenyelectronics]

pwede po pero not recomended po, malaki kasi ang chances na mag over charge, mas ok po kung ang ggamitin nyo lifepo4, mas mataas po ang charging cutoff.

[@khalidadap2250]

@@greenyelectronics ano po ba pweding mangyari pag nag over charge un lithium nsusunog po ba

[@greenyelectronics]

may mga ilang cases na pag na overcharge sumisigaw ng very flammable na gas, yung ang nagging cause ng sunog pag may nag spark

[@abuismailibrahim3152]

Magkano benta mo sa inasemble mo ilang watts ysn

[@greenyelectronics]

36 cells x 40 is 1,440 active balancer is 550 bms is 120 holder is 60 nickel strip 50 total 2,220 pesos, yan po nagastos ko, kung ibbenta po dagdag nlng po 20% para sa gawa. 23Ah po siya 12V

[@reggiemanuel3438]

ano pwede pang charger dyan idol

[@greenyelectronics]

any charger po na may cc cv 12.6v at around 5amps

[@jessiogardo7913]

Sir anong nickel strips po gamit nio ung pure nickel po b or nickel plated steel??

[@greenyelectronics]

nickel plated lang po siya

[@michaelisaguirre1104]

12v fan balak mag diy ganyan battery

[@greenyelectronics]

pwedeng pwede po

[@michaelisaguirre1104]

Ilan battery kaya ng 15watt DC fan

[@greenyelectronics]

@@michaelisaguirre1104 depende po kung ilang oras nyo gagamitin ang dc fan

[@michaelisaguirre1104]

4/5 hour depende sa brown out

[@greenyelectronics]

kagaya ng inasemble ko aprox 17 hrs po yan sa 15watts na load

[@paoloumali100]

What spot welder po ang gamit mo?

[@greenyelectronics]

yung mumurahing spot welder lng po, may video din po ako nung inasemble ko siya

[@kenzhelpescadera5354]

Sir anung apps gamit muh na repacker?

[@jamesabara5082]

Sir pa hingi ng link ng repacker ng application sir.thanks

[@renantevillaflores5056]

Pwede b ko pagawa un battery pack ng cordless drill ko na 14 volts sa iyo? Kasi basted na eh.

[@greenyelectronics]

pwede po, taga saan po kayo?

[@renantevillaflores5056]

@@greenyelectronics sampaloc manila ako nakatira. Saan un shop ninyo?

[@fireandrevivalinmyheart6365]

Hi sir ilan volts na pwede ma full charge ang lithium battery na di cya sasabog po...para sa charge control ma e control po cya.. thanks po

[@greenyelectronics]

yan pong nasa video ko na li-ion 4.2volts po per cell, 12.6 nmn po pag 3 cells, max charging voltage napo yun

[@fireandrevivalinmyheart6365]

@@greenyelectronics thanks po

[@ranz-24]

Pwd po ba lagyan ng iverter yan sir?

[@greenyelectronics]

pwedeng pwede po, inverter po ang ginamit kong pang test sa video

[@ranz-24]

@@greenyelectronics maraming salamat po

[@papalostech9400]

Sir pano mg check ng mah ng batt

[@greenyelectronics]

check nyo po yung video ko na battery capacity tester

[@papalostech9400]

Sir pa links nga

[@uneekdigital]

Hi I have a question how are you getting on with that BMS you installed I'm having to remove mine as they give incorrect readings from the load charge end & as low & on the OV & 12.6 end higher readings. Plus my Renogy mppt not charging correctly .But when you short plus & minus it give correct voltage..& when you remove the BMS & connect directly to the MPPT controller it charges correctly ..

[@greenyelectronics]

have you tried another one? because mine works perfectly

[@uneekdigital]

@Green Apple Electronics yes and that failed too.some batteries are 3s 20p 60 bats in total and some 3s 9p 30 bats in total even the 3s 5p 15 bat packs had to remove not giving correct voltages..I've put my MPPT to charge to 12.6v and they seem OK on the theory like lead acid that don't need a BMS.

[@abnerevangelistagarcia1567]

Sir pangi diagram at ilang pcs yan

[@Chabhe09]

Ilang AH po ba ganyang set up sir?

[@greenyelectronics]

23Ah po

[@jhay_mstv6331]

No need na po ba dto charging module?

[@greenyelectronics]

yung bms napo

[@jhay_mstv6331]

@@greenyelectronics paano po lagyan ng indicator? Kasi mostly yong bms na available is no lighting indicator

[@greenyelectronics]

@jhay_mstv6331 indicator po ba na full charge?

[@jhay_mstv6331]

@@greenyelectronics yes po

[@jhay_mstv6331]

@@greenyelectronics yes po

[@dvnoytekvlog6634]

Hello po master panood po. Isa po ako baguhan na Vlog at sa electronic.. pa support naman po master 👍🙏 salamat po God bless.🙏..

[@greenyelectronics]

Thanks for watching po, sige po pasyalan ko po kayo

[@dvnoytekvlog6634]

Salamat po sir..👍🙏

[@ornales2503]

sir my mga naharvest ako from old laptop battery kaso puro 1.8v to 2.2v tapos my naicharge ako isa for 4hrs pumalo naman ng 3.6v kaso after drain test ng 24hrs bumagsak sa 2.0v goods pa ba gamitin ito sa mga diy solar floodlight? tia

[@greenyelectronics]

hindi napo safe yan, mura lng nmn po ngayun sa online, yung mga used din gaya ng mga ginamit ko pero healthy pa.

[@vasquez22]

Sana mapili mo ako idol. Sira tester ko at wala pang tanggap.

[@freddielaguerta3708]

Malinis at maganda magpaliwanag

[@greenyelectronics]

Thank you po ☺️

[@jhulz.c1908]

Too long, need to he in English