EASY DIY HOME DECOR with the xTOOLS P2 LASER ENGRAVER

[@RealtorCrawford]

Small tip: when sanding small pieces hot glue them to the work space and they don't move as much and the glue is easily removed from the work pieces. Xtools.

[@PacificPinesRanch]

Thx for the tip!! :)

[@zacharyneufeld3854]

Xtools Those table chandeliers look cool as hell ! Thank you for another video!

[@PacificPinesRanch]

Thank you!! Thanks for entering the giveaway! :)

[@brianpaulson5096]

They are beautiful xtools

[@PacificPinesRanch]

Thank you!! And Thanks for entering the giveaway :)

[@cathywatson1420]

The X tool is something else. Love your design. I love watching y’all do something different together.

[@PacificPinesRanch]

Thanks so much!! :)

[@leedavidson7861]

Love the foam table

[@PacificPinesRanch]

Thank you!! :)

[@airwolf08]

How does this compare to the xtool 40 watt diode laser and the machine your using now seems really loud or is it the mic really close to the cutter I am waiting to make a decision on what laser is best for me so thanks for your videos

[@PacificPinesRanch]

I'm not sure because I've never used the Xtool 40W diode laser. What I can say is the P2 is really incredible compared to other diode lasers I've tried. The machine is very high quality and works really well. I really love their software as well.

[@wildbumbylee6731]

that xtool kinda like a C&C machine, possiblity are endless

[@PacificPinesRanch]

For sure!! We have so many ideas already ....

[@thetinkerverse]

What settings did you end up with for the cardboard? I found I had to go much slower and much higher power than I really expected on cardboard to get clean through in a single pass. Think I landed somewhere around 80% at 60mm/sec

[@PacificPinesRanch]

Same here! I'm pretty sure I was close to that too. It was definitely surprising.

[@adeladahdah4418]

Very elegant!

[@PacificPinesRanch]

Thank you! 😊

[@MelissaMalzahn]

Xtools. Those turned out really cool. Love the candle holders too. Great date night dinner. ❤

[@PacificPinesRanch]

Thank you!! Thanks for entering the giveaway! :)

[@raulg6610]

xtool looks incredible

[@PacificPinesRanch]

It definitely is!! We absolutely loved using the machine and the software. :)

[@ericallan1373]

Xtools What a cool laser printer 👍

[@PacificPinesRanch]

Thanks for entering the giveaway! :)

[@carlosmanjarrez1809]

Wow the beautiful candle holders! Awesome art how many watts on the Xtool machine to cut that thicknesses

[@PacificPinesRanch]

Thank you so much!! :)

[@deborahsoto957]

The small prototypes for the placemats could also make a great lamp shade (use 4) if placed in a square

[@PacificPinesRanch]

Love that idea! :) So many possibilities

[@vickyoakes4584]

Great video, I love it!❤ oh, and Xtools!

[@PacificPinesRanch]

Thank you!! Thanks for entering the giveaway! :)

[@wandaking4229]

Awesome. I knew you were talented. They are beautiful. The table chandeliers would be pretty too with the base dark stain and the top lighter. You two are so blessed. Love watching your videos, keep them coming. Stay safe.

[@PacificPinesRanch]

Thank you so much! :)

[@saimashahab3535]

Interesting vedio . I m waiting for next vedio.

[@PacificPinesRanch]

Thank you!! :)

[@FISHFIRSTALWAYs]

What camera are you using if you don’t mind me asking

[@PacificPinesRanch]

I use a few: Gopro, Iphone, and Canon R6

[@kevinlee6731]

Xtools Great work!

[@PacificPinesRanch]

Thank you!! Thanks for entering the giveaway! :)

[@kennethmiller600]

Beautiful

[@PacificPinesRanch]

Thank you!!

[@saimashahab3535]

I have atomstack s10. Can I make it like this candle stand on my machine.???

[@PacificPinesRanch]

I'm not sure! Depending on the machine it might take a few more passes to cut the thicker wood but you can always use thinner wood and glue it together. Hope that helps! :)

[@thesplinteredfinger]

Nice video! I would look into somehow attaching or suspending the candle holders when lit so that they don’t tip over if you bumped the table

[@PacificPinesRanch]

Thank you!! :)

[@wildbumbylee6731]

pretty fancy candleholders. your hard work paying off with sponsorships. lite saber next?

[@teresatheiss7652]

I’d love to purchase the Xtool P2

[@PacificPinesRanch]

Here is the link to buy one: www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=AeZ0-iXvB044e&

[@DuongVu-zj1po]

What was the down time for your second one you did?

[@PacificPinesRanch]

I can't remember exactly but I think it took about 20 minutes to cut the light stands and about 30ish minutes to cut the placemats.

[@brianb69692003]

xTOOLS How cool it that!!

[@PacificPinesRanch]

Thank you!! :)

[@deborahsoto957]

Xtools easy peasy!

[@PacificPinesRanch]

Thanks for entering the giveaway! :)

[@IcanCwhatUsay]

This vs the Falcon2 40w, is the 15w worth $4k?

[@PacificPinesRanch]

The P2 has a lot of different features that justify the price point. Also the P2 is a C02 laser (not a diode laser) and the quality along with the technology the P2 offers really make it worth the price. It does a lot more than the Falcon. The Falcon is a nice entry level laser, but the P2 would be my choice for anyone looking to get into laser engraving more seriously or wanting to start a business.

[@SmokeScript]

Great video. Lots of ideas! I am just about to get a laser machine and will certainly be making items like you have created in your video. You live in a beautiful place for sure. I would really like to know where you got your steak knives from plz? Thanks for sharing :) Derek, from Ireland

[@PacificPinesRanch]

Hi Derek! Thanks so much!! It's really an incredible machine. We are really happy with it so far. Honestly the steak knives we got at a discount store and they don't have any information or brand on them so I don't know where they are from! Wish I could help more with that.

[@SmokeScript]

@@PacificPinesRanch Thanks for taking the time to reply.

[@mustafasamir7030]

This is nice

[@PacificPinesRanch]

Thank you!

[@earlparkinson-j8s]

WOW!!!!!

[@PacificPinesRanch]

Thank you!!

[@lucas6426]

❤ Great. Living in the Netherlands Europe . Lucas

[@PacificPinesRanch]

Thank you!!

[@burnsideott]

You need to purchase a spindle and belt sander

[@PacificPinesRanch]

It's on the tool wish list for sure! :)

[@mlondonop]

X Tools!

[@PacificPinesRanch]

Thanks for entering the giveaway!

[@naz0ua]

How long did it take to cut and engrave each item in your video?! Would you say it’s a fast laser or will i need xanax to deal with it?! 😅

[@PacificPinesRanch]

Lol it didn't take too long actually. The longest ones were the placemats because there were so many cuts but I don't think it took more than 30 minutes if I remember well.

[@naz0ua]

@@PacificPinesRanch oh wow is it just me who thinks 30 minutes is A LOT of time to cut one piece? 😅 i wish they made a 100w desktop laser. THAT would be ideal 😂 Thanks for the quick reply btw!

[@DeborahKEgolf]

XTOOLS 😂😊🎉

[@PacificPinesRanch]

Thx for entering!! :)

[@paulwatts1963]

XTOOLS

[@PacificPinesRanch]

Thanks for entering the giveaway! :)

[@bettyharper2214]

👍♥️

[@PacificPinesRanch]

Thank you!

[@robertwebster8992]

X Tools

[@PacificPinesRanch]

Thanks for entering the giveaway! :)

[@Bugz1968]

xtool

[@PacificPinesRanch]

Thanks for entering the giveaway!!

[@WayneNorton-pl8mc]

Sounds like it’s a little noisy

[@PacificPinesRanch]

It's not too bad in real life.

[@alsammak71]

am 166 like really u r so cute 🥰 🇰🇼👍

[@greg4367]

SO much time consumed, SO little useful information.

[@PacificPinesRanch]

What information were you hoping to get? I'd love to know so I can improve my future videos

[@lisaajordan]

XTOOLS

[@PacificPinesRanch]

Thanks for entering the giveaway!!

[@harryendawypknightly7291]

XTOOLS

[@PacificPinesRanch]

Thx for entering the giveaway!

[@kelleyhowe2518]

XTOOLS

[@PacificPinesRanch]

Thx for entering the giveaway! :)

[@Manwithaplan67]

XTOOLS

[@PacificPinesRanch]

Thx for entering the giveaway!

[@WayneNorton-pl8mc]

XTOOLS