What I don't like about this kit , is the bulkhead connector only allows partial engagement , as the bolt limits this travel It is impossible to fully insert the connector , when installing to confirm the pins all align , due to the bolting method, So if the pins are misaligned , you won't know until its too late
@jesustamez93092 жыл бұрын
Hi, Is anyone have a video where shows how to install , need to haver more visual aids. Thanks
@raymondmenendez649929 күн бұрын
Does anyone know if the horn relay is included in the new wiring ?
@marlowwilliamson18832 жыл бұрын
I need this for my 68 Buick eletra
@EazyD_PFT3 ай бұрын
Me to!
@GunzBDrugz Жыл бұрын
I need the whole wiring harness set up for a ‘86 Monte Carlo ss , what’s the best option for me ?
@djredl2232 Жыл бұрын
I used p/n 20104 on my 80 Malibu
@sergiodiaz44113 жыл бұрын
Hello I have one of this wiring why I’m not getting spark?
@painlessperformance3 жыл бұрын
Sergio, Sorry for the delayed reply! Have you contacted our tech line or gotten this handled?
@JuanGomez-ih3zn Жыл бұрын
whats the price for 1970 Monte carlo
@trevorober23849 ай бұрын
What does the red and blue pigtail do
@ShadyWorldW9 Жыл бұрын
Will this work for 85 Oldsmobile cutlass gbody
@rwebdaddy2 жыл бұрын
What size fuseable link do I use for the main power wire that feed the fuse panel?
@delcole83212 жыл бұрын
I've got a painless wiring system part number 20101 I have a 67 rs/ss Camaro with hideaway headlights my issue is the turn Signal lights the lights have 3 wires a white wire and one purple and black wire that has a connector my wiring harness just has one light blue wire that goes to the light
@painlessperformance2 жыл бұрын
Del, If you reach out to our tech guys at 800-423-9696 or at support@painlessperformance.com they'll be able to get you pointed in the right direction on this.
@budgetbuilderc10builds993 жыл бұрын
? I’m using original wire harness standalone Engine harness How do I go from what I have to connecting to what you have to the rest of the truck
@painlessperformance3 жыл бұрын
Enrique, What truck are you building? Our chassis harnesses will cover all the chassis items, headlights, taillights, ignition switch, headlight switch, heater/AC power, etc. Tying our chassis wiring into a standalone engine harness is pretty easy, usually standalone harnesses just need to see ignition switched power.
@paulmorales29552 жыл бұрын
Where can I get a good price for a wiring harness for a 50 Chevy freight line I need a whole wiring harness where can I get the cheapest one
@painlessperformance2 жыл бұрын
Any of our dealers like Summit Racing, Speedway, Jegs, Affordable Street Rods, etc. will carry our offerings. Our 18 circuit Customizable kit starts at $229.99.
@damnitdang2 жыл бұрын
Where do the circuit get the main 12v from? Is there a 12v stud for battery cable?
@painlessperformance2 жыл бұрын
The main 12V feed for the fuse block will come off of the starter and will have a MIDI fuse in-line to protect the system.
@nelsonfont67303 жыл бұрын
Can You guys do any Harness?
@painlessperformance3 жыл бұрын
We don't do anything one-off or custom, what are you working on?
@treggudbranson99753 жыл бұрын
Would I be able to use this for my 90f250 I do t see why not I’m just 2nd guessing my self
@painlessperformance3 жыл бұрын
We generally don't recommend installing these in anything that came factory with EFI. If you could find a standalone harness to run the EFI/engine, you likely could fit this to the chassis. That said, you'd have to reuse your factory connectors and we aren't going to have any schematics or info on the '90 F250 on hand.
@treggudbranson99753 жыл бұрын
@@painlessperformance it’s got a 12 valve Cummins I’m looking to just get the head lights heater and windows working
@painlessperformance3 жыл бұрын
@@treggudbranson9975 our p/n 10202 will have all the circuitry you need, but you'll have to retain the power window harnesses and tie them in, use factory connectors, etc. www.painlessperformance.com/wc/10202
@treggudbranson99753 жыл бұрын
@@painlessperformance you guys are amazing thank you so much
@Braydenscates2 жыл бұрын
does this work for an 84 chevy 4 door dually?
@painlessperformance2 жыл бұрын
Your best bet for that truck is going to be our '73-'87 GM truck harness: www.painlessperformance.com/wc/20205
@Braydenscates2 жыл бұрын
@@painlessperformance Thanks
@shaunburkeen8583 жыл бұрын
I bought a painless wiring harness and had a question. Do I have to buy the engine wiring harness or will the harness I bout cover the hole jeep
@painlessperformance3 жыл бұрын
Shaun, Sorry for the late reply, our chassis harness will cover the chassis and engine so long as you are running a factory style engine. If you are going with fuel injection you will need a harness to control the engine.
@hapaboy65m873 жыл бұрын
painless needs to make how to videos because their tech call line is sad
@painlessperformance3 жыл бұрын
Sorry that you had issues, it is rare that we hear complaints about our tech line. Could you shoot us an email at marketing@painlessperformance.com with specifics and we'll make sure to relay the information and get it handled? Thanks!