Great video, Lee! I'm just getting to work on my FPV RC Car videos with this radio as my new daily! Excited to see where this will bring the hobby! 🤙
@MCsCreations8 ай бұрын
Fantastic video, Lee! Thanks a bunch! 😃 Really amazing radio! Stay safe there with your family! 🖖😊 And happy holidays!
@imadabualia48438 ай бұрын
Great vid Lee. I’ve been trying to build an FPV car with ELRS for a while now. It keeps getting too complex for me coming from wings and quads. I think this will help.
@manski2098 ай бұрын
I've installed a Walksnail fpv system on my Arrma Typhon 3s BLX and its nt complex at all, all you ned is the red and black wires connected, since im using the Walksnail goggles also, theres no need to connect the other two wires to anything. Also, when i first installed it, the system was not getting cool down from the driving, i had to installed a fan on top of the hd transmitter to the 20x20 screw holes so it can keep it cool. My buggy is also running an expresslrs receiver and the distance is amazing with no flaws. Hope this helps.
@danjones40028 ай бұрын
Im a racer and im going to order one of these soon. IT IS 1.5 ms for under $150! Also receivers are under $20! Its $200 for all my classes! Now we need a drop down wheel adapter and im set
@techstuff68298 ай бұрын
Just remember that it can have up to 2ms more of PWM time since the receiver doesn’t use a fast serial protocol to the servo, and if it just started a PWM cycle it could have most of another 2ms of PWM to finish. So maybe up to 6ms worst-case.
@bretta95646 ай бұрын
@@techstuff6829 Might be a dumb question, but wouldn’t that apply to any other pwm receiver? Even the most hardcore racing radios out there. In order to get the best possible latency, you’d have to run a serial receiver with a servo and esc supporting direct serial connection? This would be the perfect radio for that kind of setup in my mind🤔
@frasersteen8 ай бұрын
Bind it to a wing!
@Painless3608 ай бұрын
Maybe, one day ;)
@MCsCreations8 ай бұрын
That would be fun... 😬
@wasa78 ай бұрын
Mine shipped last week.
@slappomatthew8 ай бұрын
got mine on Tuesday. feels amazing. easily as quality in the hand as my Sanwa MT-4. the RX are Tiny and cheap and its edgetx.my only wish would be for a flashier looking screen. its the only thing that keeps it from completly trashing the $500 brand name radios. a color touch screen would be killer. but that would up the price. for the money this thing is just insane. one thing I like that I haven't seen mentioned anywhere is the throttle trigger seems to have more physical throw than most surface radios. gives you more precision. strangely being as its Asian made, it seems to be designed for people with large hands. the SB 3 way switch is a stretch to reach with my medium large hands, and the throttle trigger I have moved ALL the way in and its barely enough.
@arnoldtanquerido19098 ай бұрын
How is the latency compare to flysky noble pro and sanwa m17?
@peterhetterscheidt76618 ай бұрын
Great vid very informative!
@Magneticitist8 ай бұрын
There are only a couple things I don't quite like about it next to a Radiolink I've been using.. The Radiolink seems to be setup very intuitively. While I kind of wanted an extra potentiometer at one point, I realized it wasn't the best idea. I want a 2 axis camera rig but I also need it to return to center. I don't want to be turning a knob and then have to recenter it every time. Head tracking would also be an issue when out at range and needing to use patches facing a certain direction. I find a quick left/center/right switch to be ideal. The Radiolink switches are set up in a way where I can seamlessly control the 2 axis cam, flashlight, horn etc.. It's just natural to me now. I don't really see that being the case with how they've laid out the MT12. Also I've been using PPM through the DSC port and the latency has been totally fine to me, nothing more to be desired honestly. What I wanted more from it though was more channel support. I've never needed to trim things like steering or throttle or braking on the fly using switches.. I do it in the programming. So to me those trim switches are just taking up space. The ultimate ground controller for me would just come in the quality that Radiomaster provides, but just be laid out a little more intuitively.
@KW79Custom7 ай бұрын
Great video! Any way you could do a video showing how to use a head tracker for a fpv rock crawler setup? Using DJI fpv goggles? With the MT12
@Painless3607 ай бұрын
I'll add it to the list. Check out the existing head tracker videos on the channel, as the process is identical... Best of luck
@hansclaes50522 ай бұрын
Wireless trainer setup for fpv? PLEASE!!
@itzjoeylo45018 ай бұрын
Mine is in transit, would love to learn from you. 👍
@slappomatthew8 ай бұрын
I would love to see some programming ideas for this radio. I am using it for racing mostly. I put the LED's on the 3 way switch. and put the RX voltage telemetry on audible call out on the underside momentary switch. also put volume on one of the knobs.
@ExaltedRC8 ай бұрын
I'm a drag racer. Some of the features we utilize, are throttle over time, and sometimes multiple "stages" and "button launch controls". I'll give an example of a complex drag scenario: The light goes green, you pull the trigger to 100%. The remote sends 25% throttle instantly, then linearly scales to 70% over 0.4 seconds, then scales to 100% over 0.2 seconds. Is this feasible? Some radios, we utilize this, but use a button to launch. For example, you're waiting for the light to turn green. You're holding the trigger at 100%, but also holding a button down.. and say, this button effectively makes your epa zero.. the light goes green, you release the button, the epa goes back to 100%, and the car takes off with the instructions mentioned previously. Possible? This would be very huge for our segment. I'm very interested to hear your thoughts, because currently, it requires a $700-1000 radio to accomplish this.. and have good latency for the very necessary reason time on the green light
@Painless3608 ай бұрын
I'm sure you can, I'll try it and post something if I work it out.
@ExaltedRC8 ай бұрын
@@Painless360 we're very excited to go down this rabbit hole. Got one on order. I think this could be huge for our segment
@Painless3608 ай бұрын
Figured out! I'll be on the channel soon. Stay tuned!
@D20MCK8 ай бұрын
I'm a racer & really looking forward to getting mine. No idea when it'll arrive, delivery seems to be delayed.
@johndavid78408 ай бұрын
I really enjoyed your videos, it's valuable, thanks, I have a Q regarding MT12 if you figure it yet, if not no problem 1- Can I set a back light with only back throttle 2- can we set a head lights with only a front throttle 3- along with the previous
@Painless3608 ай бұрын
kzbin.info/www/bejne/fnLUe4eEfpuIqNE, remember you can support the time I spend helping others by using the links in the video description... Happy driving!
@johndavid78408 ай бұрын
Is possible to run two receivers in the same car/profile to get exp; 8x2= 16ch how?
@Painless3608 ай бұрын
Yes, see my videos on it.
@BigWillieFPV7 ай бұрын
Just got mine, it’s uncomfortable as all hell, my trigger finger hits the back overhang and feels awful operating the throttle 😢 hope I get used to it 🤨
@jaymitchrc8 ай бұрын
Very nice. I'd like to see a video regarding updating the latest firmware and channels assignments along with trims. I have a 4 in 1 model and I saw furaba as a protocol but didn't see thfssas or fasst an option only sfhss. Also didn't se support for spektrum rxs can you share where ppl may go to download firmware to support these
@Painless3608 ай бұрын
m.youtube.com/watch?vDfKyx0yTbXU covers the MPM stuff. More vidoes to come... Stay tuned and subscribe!
@Sega-and-Mao6 ай бұрын
Thank you for all those informative videos. I am interested in buying one, but I need some channel delay functionality as well for my particular setup. Does it have channel delay as we are used in the plane versions of edgetx??
@Painless3606 ай бұрын
Yes, all the same power to configure things as other EdgeTX radios... Happy flying
@Sega-and-Mao6 ай бұрын
Thank you so much for the so swift reply!!! Sounds like a deal to me@@Painless360
@Sega-and-Mao6 ай бұрын
@@Painless360 just got mine and I love it!!! Just a small issue so far. No matrer what I've tried, I can't get tge servo to work past 100(normal throw)... Could you please confirm it can be done, once you have the chance, or is it a bug in the firmware or anything elae??
@NorgeSquad7 ай бұрын
The reason why i swapped is because Manufacturers discontinues the products
@Painless3607 ай бұрын
That is an excellent reason. Using technology like this stops us being led by the nose by vendors..
@nursinggerm20096 ай бұрын
I have both the elrs and the 4 in 1. It’s funny that they look the same with no physical identification. How can I quickly tell which one is which when getting them out of my transmitter area lol
@Painless3606 ай бұрын
I'd put a sticker on one 👍happy driving 😊
@bushythebird8 ай бұрын
Does it have a haptic motor?
@dr0n3droid8 ай бұрын
Yes
@hanger9uk6657 ай бұрын
Hi, do you know if it will bind to the flysky fs-gr3e receiver? I have many models using that receiver and would like to upgrade my current flysky transmitter.
@Painless3607 ай бұрын
m.youtube.com/watch?vDfKyx0yTbXU will show you how to check. Best of luck
@kwad3d108 ай бұрын
Hi, I'm still trying to figure out the programming for turret control. This is the controller I'm actually trying to do it on. I would like to use the joy stick expansion module to control a tank turret without the outputs returning to center when I release the stick. Just like how a video game controller operates on a first person shooter. I watched a bunch on videos on the playlist you linked me to but couldn't find the one the covered any similar programing.
@Painless3608 ай бұрын
You need to setup two controls to decrement and increment a global variable and then use that GV as the 'weight' for the channel for the turret. kzbin.info/www/bejne/gJDFaph9fsmShK8 was the closest to what you want. At the moment. EdgeTX is having to catch up with features like this as more ground based users demand it. Using things like GVs and 'Drive modes' make for a less than simple solution..
@jundelfintvhobby19 күн бұрын
Hello again sir can I bind ER3C-i Rx. to radiomaster mt12 4in1 tx?
@Painless36019 күн бұрын
This'll show you how to check kzbin.info/www/bejne/epeuqqtmrrmVjrc
@manski2098 ай бұрын
Great video Lee, as always. Is there a way to setup a button to act as an "arm and disarm" state like in fpv so i can't hit throttle by accident and have my buggy take off if i bump the throttle?
@Painless3608 ай бұрын
Yep, I'll make a video on that... Stay tuned
@manski2098 ай бұрын
That would be so awesome Lee, thank you. I'm sure there are subscribers that would benefit from this. Thanks again and Happy Holidays to you and your family.
@Painless3608 ай бұрын
kzbin.info/www/bejne/ZnakZ6pojaqtj6M Don't forget, you can support me by using the links in the video description... Happy flying
@SmartContractHaxor8 ай бұрын
What kind of range can you get?
@jundelfintvhobbyАй бұрын
Sir cant bind my mt12 to HSP RX-G3 receiver can you help me?
@Painless360Ай бұрын
I can't see it supported. See kzbin.info/www/bejne/epeuqqtmrrmVjrc to see how to check.. Best of luck
@jundelfintvhobbyАй бұрын
@@Painless360 thank you sir for the info.
@daveopie12348 ай бұрын
After years of flying drones, I'm getting into RC cars/boats. I know the receiver of some RC cars have a gyro that somehow keeps them running mostly straight. Is there a ELRS PWM receiver for cars with a gyro? And how does a gyro in a receiver work? I'm used to gyros in my flight controllers, not receivers. Don't need an answer here - this is more of an idea for a future ELRS video.
@malte99998 ай бұрын
Not yet, gyro support for ELRS receivers is currently being worked on
@RamjetAlpha17 ай бұрын
Can I get this to have 16 channels? If so, how?
@Painless3607 ай бұрын
Bind multiple recievers. See my video on it.. Best of luck