Paint Prep Process Episode 3: Apply Primer

Kevin Ansell, 3M Application Engineer, applies primer to the repair area in the third episode of the Paint Prep process video series. He also talks about to dial in your spray gun to best apply the material.
Important notes (00:23)
Wear proper PPE: safety glasses, protective gloves, respirator and whatever else you need for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations to confirm you’re using the correct adhesive for the job.
Spray Gun Settings (00:50)
Final Settings for this Application (02:20)
Applying the Primer (02:35)
Get proper film build and coverage.
How Much Primer is Enough (03:10)
Important note:
There are of course many factors and variables that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process, including relevant vehicle, part and OEM guidelines, and determine what is appropriate for that repair.
Products used in this video:
3M™ Performance Spray Gun System with PPS™ 2.0
www.3m.com/3M/...
For more advanced tutorials, check out 3M Collision Repair Academy
www.3m.com/3M/...
You’ll find courses that will expand your knowledge, deliver practical procedures that you can use right away, and, in many cases, earn you I-CAR credits.
Safety and warranty information
www.3m.com/3M/...
Website: www.3MCollisio...
Instagram: / 3mcollision
Facebook: / 3mcollision
Twitter: / 3mcollision

[@azamatsiddiqui6456]

what primer is this surfacer/sealer or another kind?

[@JoseGutierrez-mo1tu]

What color did you use to apply the primer?

[@deankay4434]

Why use a 600ml cup when spray such a small repair with the manufactures recommended film thickness of three passes? That is waist full if not using a smaller cup. DK. ASE Master Tech since 78.