Painting a G Pro Wireless - Logitech - Custom Gaming Mouse - how to tutorial (robbins egg blue)

[@whatskraken3886]

This painting advice is pretty much painting advice for anything

[@brelii3810]

Baha tried painting my gpro wireless a couple months ago but failed miserably. Wish this tutorial was out before then 😂🙂

[@Ryan-uf2oi]

Amazing cutting skills on that G logo! I repainted an old Zowie mice before and apparently lacquer clear from hobby stuff (like Tamiya) isn't strong. Next time I'll use 2K lol

[@snipeyHAHA]

thanks man!

[@brelii3810]

For the stenciling process you don’t have to push as hard as him as you’ll most likely be redoing your stencil multiple times and if you mess up it’ll leave scratches. Also the tape’s pretty fragile so you won’t need all that force

[@snipeyHAHA]

Good tip :). Better to press lighter, when I do it it does leaves knife marks

[@chroniic_potato598]

You are by far the MOST underrated youtuber... This is insane what you can do.

[@santiagomenendez5736]

I really liked the mouse and the video it hurts that I don't have so much support but it was super good, greetings from Argentina

[@MarcinAdamowicz]

Maaan I love it!

[@theanimals7784]

amazing thanks for inspiring me to buy the sandpaper and the g pro.

[@snipeyHAHA]

thnaks :)

[@syedafnan397]

really nice colour disinged

[@antmg7613]

Hello! I have a kone pro and i was thinking of painting it so this is very helpful, thanks :D

[@catboy_tylerr]

thanks for this video! I have a wireless mouse I got from target a little while ago and was trying to decide on how to paint it. I finally figured out what I wanted to do with it, but wasn't sure what kind of paint to use, so this definitely helped! did you ever find out if a matte clear coat works just as well as a glossy clear coat? thanks again!

[@snipeyHAHA]

matte clear coats work fine. I think you have to get a 2k one by spraymax though. I don't know of any other good matte clears

[@bobbryan0103]

That is awesome!! Will this paint be damage by alcohol?

[@ryanb8931]

Well done! Bro !

[@snipeyHAHA]

thanks :)

[@dooman2018]

Great video, very well made

[@snipeyHAHA]

thanks :)

[@gordinski1928]

CEO of SHAKE

[@Moonwired]

Did you forget to remove the masking tape for the dots?

[@nvus]

If I have a white mouse and I just want to make it glossy, can I just sand it, use a primer, and use just the clear coat? I want the glossy texture like a zowie special edition mouse (white ones) if you ever had one of those.

[@snipeyHAHA]

Correct you can just sand it and paint it clear. Never felt a zowie. The texture of clear coat is very smooth. Pretty much no texture

[@nvus]

@@snipeyHAHA It's a grippier texture though right?

[@FarFromLogic]

I keep having an issue with the paint smudging and pealing over time from the heat and oils of my hand, not sure if just having more clear coats would have fixed that, what do you think, what would you suggest

[@snipeyHAHA]

does the clear coat peel off of the basecoat(color). Or does the basecoat peel off the mouse? what kind of clear are you using?

[@FarFromLogic]

@@snipeyHAHA over time all of it is pushed off to reveal the plastic underneath, this is on the sides where I grip it, the top where my palm rests and the left click most recently, I sanded the mouse, 2 coats of Rust-Oleum AE0541400UK and a coat of Rust-Oleum AE0040003E8 400ml Crystal Clear Matt, I donno if its because I didn't do enough clear coat maybe, I assume the paint and clear coat brand is okay

[@Project-Club]

@@FarFromLogic u want 2-3 coats of clear coat. Try a 2k clear coat. That should do the jib

[@ilanspijker]

It looks tasty😂

[@GeroFPS]

How long did u let the paint dry before putting the mouse back together?

[@jonicamonteiro2914]

My white mouse paint peel off hope I can try do repaint it 🥲

[@nilebes4742]

I really want to do this but i fell like ill break it disassembling it

[@ethanhua3892]

Nice video!

[@snipeyHAHA]

thanks homie :)

[@joeabosssands2481]

Ight so I have a question. Is it normal for the paint to eventually kinda come off a on parts we’re your palm rests the most. The sweet from me hands kinda took some of the paint off after a bit

[@snipeyHAHA]

no if you sand it and use a good clear coat it should last years without that ever happening

[@A_Class216]

Use a 2k clear. Not 2x clear. 2k is a automotive clear.

[@knguyen1]

Is there a matte clear coat anywhere you reccomend?

[@mehdidzd]

i have a coating peeling in my logitech x superlight can i do that ?

[@tallboi4735]

does the paint affect the wight of the mouse

[@snipeyHAHA]

not enough to feel the difference

[@divaNR]

Yo great video! Quick question, if i only want to give the mouse just a glossy spray, do i still need to sand the mouse?

[@snipeyHAHA]

yes definitely or the paint wont stick well. Sand it with 800 or 1000 grit first

[@divaNR]

@@snipeyHAHA alr8 thanks for the answer

[@Peej2189]

Any idea if you could take more sandpaper to it to give it some grit and not fuck up the paint? I would assume some super fine sand paper would work just fine. Just some noob question. :)

[@snipeyHAHA]

you mean sanding the clearcoat at the end so it has more grip or textured feel?

[@Peej2189]

@@snipeyHAHA Yes! Sorry I worded this a bit weird.

[@yooGrito]

If I wanted to just get the speckled effect on a black matte mouse will I still have to sand it down or you think just doing what you did and letting it dry would be enough?

[@dicksack]

I think you should still be sanding the mouse before applying any type of paint

[@viego29]

If I want matte, do I leave it be? Or is there like a matte spray paint similar to the glossy one you used?

[@snipeyHAHA]

You have to get a matte clear coat. I would maybe get the max2k matte clear.

[@donsonly]

Does it not matter if you sand the clear part where the rgb is?

[@maddugqc6911]

Is this make the mouse grippier?

[@doni223bambu]

Good video

[@snipeyHAHA]

thanks :)

[@snipeyHAHA]

Interested in buying a cusotm painted mouse from me? Message me on my instagram: instagram.com/snipeyhaha/ How to disassemble this mouse: kzbin.info/www/bejne/h6axmGpnfNSglZo

[@marcolud1300]

love the look, how much weight does the paint add to the mouse?

[@ΘωμάςΚαραθάνος]

0.0001 gr

[@jacksonhowes6032]

Yeah literally nothing

[@marcolud1300]

@@jacksonhowes6032 just out of curiosity, have u ever weight the mouse after the paint job?

[@snipeyHAHA]

@@marcolud1300 i have not. I'll have to do that next time. I'm curious what the weight is also

[@gaminginaction6364]

ShAkEy HaNdS! 14:20

[@djbrandon5016]

Can you do my g pro wireless for me??? I just want to make it like yours but with white instead of blue. Willing to pay. 🙏

[@snipeyHAHA]

yesss. Message me on my instagram instagram.com/snipeyhaha/

[@AsianAnimeRuLe]

how long does this clear coat glossy finish last?

[@snipeyHAHA]

should last for many years :). You just have to use the good paint

[@towfoon]

I want to paint G203 matte white, will it be the same process as this video?

[@snipeyHAHA]

yes this process will work for painting any mouse and pretty much anything really

[@xyzdegen]

is glossy more grippy for dry hand ?

[@snipeyHAHA]

It's definitely way more grippy than the mouse is not painted. I haven't tried matte clear coat though yet...

[@wardope]

i just sandblasted the fuck out of my mouse shell before painting it! worked perfect

[@snipeyHAHA]

haha really? that's awesome. I wish I had a sand blaster

[@Foxcez]

Is there a matte clear coat I can buy instead? Don't like glossy. Like would rustoleum white paint+primer and spraymax 2k matte give me a long lasting paint job?

[@snipeyHAHA]

yes get the spraymax 2k matte. Thats the only matte I know of in a rattle can that will be good. That stuff should last many years and look good

[@Foxcez]

@@snipeyHAHA i talked with nacho and some other guys they say that rustoleum is too thick to use and they recommended montana products. What do u think?

[@snipeyHAHA]

@@Foxcez it has seemed to work fine when i use it with no issues so far. The montana paint is probably nicer though. Also that rustoleum 2x doesnt even need a primer so it will end up with less layers which will be thinner in the end i think

[@Foxcez]

@@snipeyHAHA you the painted g502 using this method right? do you still have it and have you noticed any discoloration?

[@snipeyHAHA]

@@Foxcez yea i painted the G402 with the same paint. No it still looks the same. That clearcoat will last a long time

[@HalloGais]

Well done!

[@snipeyHAHA]

thanks :)

[@HalloGais]

@@snipeyHAHA No Problem! Hows the paint job holding up? Or is it just a display piece??

[@snipeyHAHA]

@@HalloGais I sold this one. But the first one I painted I just sold today and the paint looked new still

[@HalloGais]

@@snipeyHAHA NICE!

[@calcium3001]

Hey I have sweaty hands is a glossy mouse gonna slip out of my hand ?

[@snipeyHAHA]

feels a lot grippier than it does not painted. But I'm not sure for sweaty hands

[@Ryan-uf2oi]

Just add grip tape if you want more grip. Trim 'em down so it doesn't cover too much of your paintjob

[@calcium3001]

Ryan thank u I was thinking of getting grip tape so my g pro would have nice paint and it won’t slip out of my hand

[@SwiftCookie]

Glossy mice are actually better for grip, the matte coating on the GPW isn't very good for grip at all.

[@1tzelG_]

love it. si tan solo pudiera pintar.

[@hubi8628]

is the clear coat just to make it glossy or are there any other reasons

[@snipeyHAHA]

also to protect the color paint and make it durable. You can also use a matte clear coat if you dont want gloss

[@Carl-ve2ch]

How long do you have to wait for the clear coat to dry?

[@snipeyHAHA]

overnight is fine

[@JohnDoe-vt6zm]

Can you do this with a g pro superlight?

[@snipeyHAHA]

yes I plan on making a video soon with the superlight. I just have been broke. Have not been able to afford one yet

[@jonathanledee4323]

why do you sand down the logo too? and what was the mistake you made in the video and why does it matter

[@snipeyHAHA]

I sand the logo so that the clear coat paint sticks to it. The mistake I think I forgot to remove the tape the first time i put the clear on lol. You need to sand down the color before the clear slightly on the edges where the tape was also or there will be a nasty texture there

[@masterspy534]

i want to paint my GPW blue, what paint would you recommend

[@snipeyHAHA]

the rustoleum 2x

[@NoWifi1]

@snipeyhaha I would love to get you to build me a custom painted g pro wireless let me know how I could get in touch with you for more details.

[@snipeyHAHA]

Hey i'd love to dm me on instagram

[@NoWifi1]

snipeyHAHA sounds like a plan.

[@TheJoker-pg9td]

Thanksssss

[@ItReignItPour]

what kind of paint should i buy?

[@snipeyHAHA]

2x rustoleum is good. And I have a link for the clear coat in description. And art stores will have montana which has a ton of colors

[@ItReignItPour]

@@snipeyHAHA is acrylic paint fine? I was thinking about doing a white silver speckle on my model o wireless.

[@user-gq6vb9wq1z]

GG

[@twisted0306]

is there a way to order a mice from u man?

[@snipeyHAHA]

yea contact me through instagram :). I can do custom mice

[@ChloeSantos14]

Is it recommended to sand paper it?

[@snipeyHAHA]

yes like i do in the video

[@ChloeSantos14]

@@snipeyHAHA can i only use regular spray paint like flat black color. i don't know what primer is?

[@snipeyHAHA]

@@ChloeSantos14 primer is just what you spray first because not all paint will stick to plastic very well. Or some paint might be a bit transparent and won't look right sprayed over black so you would want a lighter grey primer first. Most spray paint should work fine though without primer as long as you sand it good first. Or just use that 2X type of paint I use it works really good.

[@ChloeSantos14]

@@snipeyHAHA thank you man. my mouse is white i am going to paint it with black

[@sterkriger2572]

I know this will sound strange but how much weight does the paint add to the mouse after you finish it?

[@snipeyHAHA]

that's a good question. I will have to weigh the next one I paint before and after

[@rekkriendo]

do you have parkinsons?