FIX Any Car Dents in Seconds Using this DIY Friendly Tool

In this episode we check out a cheap option for pulling out any dents from your vehicle. We will review and capture how to properly use the tool to ensure your project will be comply repaired properly!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
Get the OFFICIAL Paint Society Paint Suite Here: amzn.to/3Eq3pSf
🔺SHOP ALL Exclusive Products found on our KZbin channel for your project! 🔺
*To Recieve 10% off #Eastwoodco Products use coupon code BRIAN10 at eastwood.com
Products in this Video:
Dent Puller: amzn.to/4aFGXDF
Center Punch for High Spots: amzn.to/3RJWutH
Tool Cart: amzn.to/41KZiLt
Milwaukee Grinder: amzn.to/47iMiOc
Rage Body Filler: amzn.to/486Ytio
Glaze Putty (small imperfections, skim coat): amzn.to/41xHHGN
2k Primer: amzn.to/3S0E1KB
Primer Gun: amzn.to/3ttElIv
SANDPAPER
MaxFilm Ultra Premium 6 inch Sanding Discs, P180, 15 Holes, Hook & Loop, 523-0180, 50 discs amzn.to/3Gxasdp
MaxFilm Ultra Premium 6 inch Sanding Discs, P320, 15 Holes, Hook & Loop, 523-0320, 50 discs amzn.to/3ZMasNu
MaxFilm Ultra Premium 6 inch Sanding Discs, P400, 15 Holes, Hook & Loop, 523-0400, 50 discs amzn.to/3KKmNgS
MaxFilm Ultra Premium 6 inch Sanding Discs, P600, 15 Holes, Hook & Loop, 523-0600, 50 discs amzn.to/3MsZn10
Sandpaper for Scuffing Base: amzn.to/3Su6FED
Interface Pad: amzn.to/3KlmS9p
MASKING
36'' Masking Paper: amzn.to/3RiPFAv
18'' Masking Paper: amzn.to/3r6hoK8
6'' Masking Paper: amzn.to/3RbmEH3
1/2 Fine Line (Used in the video): amzn.to/3P7ULNr
3M Masking Tape: amzn.to/3raZF4b
Foam Tape: amzn.to/461jKZx
1/4 Fine Line: amzn.to/3ER7U8Z
Masking Machine: amzn.to/45IieeV
other products
Astro Sunlight: amzn.to/3NrI3HZ
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
Prepping Sandpaper Starter Kit: amzn.to/3UplwPS
Prep Cleaner: amzn.to/3fZ2KPn
Tolecut Sanding Dirt Nibs: amzn.to/3PFDcEm
Griots Garage Polisher: amzn.to/3jeim2p
Milwaukee Mini Buffer: amzn.to/3G28ORm

[@pedenconceptz]

I have one of these. You had it on the wrong setting. The little triangle on the dial is for the triangle attachment. But I find you might need it a little hotter sometimes. That setting is for metal shrinking. It’s a good tool, I’ve used it to fix a few classic car panels that people had damaged almost beyond repair from welding…. And I’ve no previous experience with this sort of tool, so it’s easy to use.

[@cantgoslow]

Wow, yet again you've come through for me without me doing a thing. The two projects I'm doing the body and paint on, start to finish have countless dents and dings. I've looked at the Vevor dent puller kit for about 4 weeks, but just wanted to be sure I wasn't getting in over my head with it. Just like everything else I have learned so far about the jobs I need to do, you are the guy who laid it out for me. So simple, straightforward and super easy to understand- your vids just cannot be beat. If my projects turn out okay in the end I will give the credit to your channel, because like I said, the only stuff I've watched, understood, and genuinely felt comfortable with, is the technics and skills I've picked up from your videos. I'd recommend anybody to watch your vids several times to really absorb all the great information in them.

[@xcomboy666]

Thank you! This is what I've been waiting for. My beloved 37K miles Honda Element was wounded by a "Smartphone with a 24-year old Girl attached." Her insurance company paid up, but since I used to fix-up old cars, I decided to give it a go. I found good rear fender and bumper cladding, and a tail-light, but these old bones just haven't gotten around to pulling the inner steel fender back to specs. Now the whole thing can be completed in my carport with genuine enthusiasm. Liked and Subscribed.

[@jeffreyfarnan1618]

Thanks for the instructional video. You weren't kidding about the lack of instructions with this thing. I appreciate it.

[@OldBondoBilly]

Using the automatic center punch is a great idea 😊😊

[@seanmillz584]

Hey Brian am from the Caribbean and I bought this exact model and was delivered last week. Great product so far, I noticed you turned the dial up higher than I did and the triangle tips didnt burn. I guess I had it set lower. Thanks for the video

[@spongeebritts6544]

Great review 👏🏼 Your explanation always on point 👌🏽

[@justinjohnson8816]

I bought one of these and use it at work all the time. Iam quite pleased with it.

[@dwaynelejeune3508]

Oh great now u went and done it! Another “must have tool” to my shopping list! Thx for sharing

[@teedtad2534]

WOW!!! Any thing to make a job more simple!!

[@leviscott8519]

Great tips on this awesome tool! Thanks for the heads up Brian.

[@royster3345]

Remember seeing this system used on Wheeler Dealers some years back, impressive results.

[@wojciechnowak8327]

Finally something i am looking for. Was watching fellow body man screwing drwall screws into metal Looked horrible. Bought stud welder but this machine does amazing joband is available on us market and very affordable. Thank you for sharing

[@silverlbc3342]

Great review, thank you very much. I got the paintless dent repair kit from Vevor, didn’t use it yet but quality is good. Maybe I’ll buy this one too, thanks again for all your explanation and vids about peeping and painting a car at home

[@rgrg3683]

i have that exact one, works awesome, also the pdr 1000 for very small dents👍

[@tl32246]

I love stuff like this. It’s in my Amazon waiting it’s turn.

[@automotiveenthusiast1160]

I bought a few 1/2 inch impact sets from this company through amazon. I had a minor issue with the order, but they had really great customer service and corrected my issue. I would buy more items from them in the future.

[@brcron007]

Great review and Tool Tip.

[@RestoHubAU]

Awesome video thanks for sharing.

[@billbliss2500]

Great Video! Thanks Brian!

[@BigBlueMotors]

I believe those are carbon rods. They are used when you have oil canning to heat up a spot on a panel instead of using a torch.

[@bducey]

I've been watching this tool. Good looking out, Brian.

[@jimfeaster4837]

Nice review😊

[@richardbartlett4075]

Great video! Did not even know that this tool existed. I don't do a lot of body work on motorcycles, but for the price, it's smart to have it around. For me, VEVOR is a hit and miss company, like Harbor Freight. I purchased a small type mobile welding table and I had to do a ton of customizing just to make it work as advertised. However, this dent puller is worth a try. Thanks for the video, much appreciated!

[@roysmith3374]

Good video, thanks!

[@ismaelbeltran1902]

I have one and it’s 2 years old already I added the maxi ground and the tips from it as well you can also add a big bolt and make the point sharp and pointy and it works better those gold tips some times suck but the equipment is worth the money !!

[@Troy_Built]

I have been watching the Mechanic Han channel use something like this for a while. Thanks for showing where we can get it.

[@Supercarlsunday]

I bought one of these a while ago, fantastic tool. I don't know how i have gone so many years welding washers on and using a slide hammer lol! I used to use all the top equipment back in the late 90s, god i feel I'm getting old lol!

[@stephenjones4013]

Great great video im getting THIS!!!!

[@writewritewrite]

great job thanks

[@luimackjohnson302]

Brilliant! Thank you for sharing this informative video. Greetings from Madang, Papua New Guinea!

[@lookatmatthew6281]

Need more of these dent pulling vids

[@matthewhogue9727]

Great video 👍very informative

[@The_R-n-I_Guy]

I haven't had a chance to use one of these all-in-one stud welder/pullers yet. I've used a regular stud welder and slide hammer to pull dents a lot. It definitely works. But it is time consuming. And you can go through a lot of studs quickly. I'm usually able to reuse the studs at least 2-3 times. Sometimes more, sometimes less. But it still takes a lot more time than an all-in-one setup like this. One of the body men who used to work with me had an older version of this setup. But it didn't have any removable attachments. It was just a weld-on slide hammer. I've definitely gotta get one of these. Or maybe find somebody who has one that I can try out. It's a major time saver and it leaves a better finish than a regular stud welder

[@jimseviltwin1]

I own a number of VEVOR tools; each has been purchased sight unseen. I have always impressed as to quantity of the tool for the price!

[@georgef1176]

You did a great video. I definitely learned something. And Im a metal fab guy. This dent welder had me kinda stumped. Thanks brother.

[@niconine268]

Seems like a great addition for any body work. For a novice like me any help is most welcome

[@delbertgrubb1341]

Nice review

[@jimprovax6846]

Hello Brian. Nice year end video. I actually bought something similar to this tool. It works with great success. Great explanation of all the functions. Have a healthy start of your new year. Enjoy some time off.

[@nigelhopkinson6614]

Hi Brain does no one use a body file anymore to pick out highs and lows.

[@toddhannah]

The guy with the garage noise channel uses this all the time with great results

[@FranciscoMartinez-hy3cx]

Thx so much, Blessings!

[@user-tn1hk6zm2f]

Excellent!

[@davidreynolds4684]

Good video thanks

[@miklil01]

Pro quality video.................Bravo!.......................

[@alibajilan8857]

Happy New Year’s dear

[@jimfeaster4837]

Oooh I like mmm I'm getting one!

[@mrbigg7255]

Pretty slick

[@timc3937]

Video on hail repair would be great!!! Happy new year! Cheers.

[@timc3937]

Lol yea I figured as much; I'm just hoping Brian has some magic tricks to minimizing the amount of fill@slomo7118

[@el_deplorablede_tejas1394]

Thanks. Ima order me one. Not bad on the price either. 👍

[@jeffharrison5265]

Wow, great tool.

[@PaintSociety]

I think so too!

[@noroomforgloom]

Really like what I see!

[@janbastein7355]

Awesome 👍👍👍👍

[@Mcfreddo]

How fantastic! Is there a 240v one I wonder?

[@thejackofalltravels8267]

Salvage Rebuilds UK Chris is a master with that tool although he doesn’t talk about settings on the machine

[@finster7582]

please use this unit in a future vid and show us ALL the attachments n what it can do !!! 😃👍👍👍👍👍👍👍👍

[@anned8634]

i try to pull dents with a paintless dent puller first then i use stud welder to fix on studs and pull them with a rack and turnbuckels where i can pull largers areas slowly with a number of turnbuckels. Sometimes i use airbags or jacks and push dents out from the inside. i always try to pull the dent without damaging the paint first. about 30 to 40% of small dents i have pulled without damaging the paint

[@772777777777777]

My question and concern about using this tool is all these spot weld will make mini burn marks on back side of a panel.... usually it take hundreds of pulls on larger dent.... many times the back side of quarter panel has limited access for painting... and I don't like the idea of just using cavity wax.. to cover the back side of these spot welds. Many times Pdr is better choice.

[@Gee_MoneyzGee_Moneyz]

I bought a stud welder last year or the year before it hasn't came out the box yet 😅. I need a good compressor and guts to sand down down a car a paint it and I have about 8 cars in my yard.

[@davegunner2717]

Awesome

[@akht5143]

They do a nice diesel van heater has many uses elswhere

[@sinformant]

Curious if this would handle a thicker steel like a 70's pickup. The bed floor on my 72 c10 is all kinds of dented everywhere. I figured I'd have to just take a torch and heat up each dent and use a body hammer to tap them out.

[@user-eq3pw1xb1e]

hello brain the tool look and work good.but what about the lenght of the ground cable and the gun.that is the most importent about the machine?

[@sealisland1]

So many things to like about this tool. I already have a Dent Fix Shark. Does anyone know if these attachments would be compatible with the Shark? I really like the triangle heads and the teardrop pins. I paid a lot for the Shark years ago.

[@georgef1176]

I bought the $250 vevor yellow stud/dent puller welder the one on wheels the big one I just tried it. At first I was not impressed but it did weld the wiggle wire good and I pulled a seriously bad dent it was beyond fixing so I asked a lot of the machine. That said it needs some upgrades. The ring dispenser is a must. And a clamp. Maybe better gun? Idk I’m on the fence. I hope you can teach me something. I like regular stud gun better but this is a different tool.

[@jpthedelawarebeeman6239]

I love Vevor chineseium tools :)

[@JoseContreras-mv5yz]

Can you make a video of fixing small hood dents with this machine?😊

[@anacleto_da_god]

What basic dent repair machine would you guys recommend besides the stud

[@billlear5607]

Is this a tool that could be used on hell damage. If so I'd love to see a video on it.

[@juniorizq2342]

I have it and its awsone well bigger model

[@ypcomchic]

I assume this is for newer cars that have super thin metal and or plastic. Does it work on a 1989 gmc suburban door panel?? Much thicker steel on 89 gmc.

[@Jan_Seidel]

You might want to grind off the spike on the center punch

[@daniloquirozjr3619]

Do you have a video showing the demonstration?

[@javierzapata7823]

Precio del spotter y donde se puede pedir

[@kovidbehl]

I don’t think centre punch would be great to get rid of high spots because its too sharp and leaves a pit in the sheet metal which would be really hard to pull

[@PaintSociety]

It works perfect. Try it

[@kovidbehl]

@@PaintSociety how would you remove the pin size dent caused by the sharp end

[@zanderbyers9071]

I have watched so many videos u have made I've painted about 10 cars in the last couple of years I'm getting ready to paint my own car last night I made the choice and ordered the devilbiss DV1 B I hope I made the right choice so now I will be painting with my DV1 b and clear coat with my anest iwata I'm also going to buy an electric sander that hooks up to shop vac I was wondering if u could lead me in the right direction for what brand of paint and clear coat I should go with the color is Dark Brauma jewel metallici want it to turn out very good going to put alot of work into the prepping as far as sanding filling little dents and cleaning and of coarse taping I will be doing all of the work myself I have a tent built out of plastic in a buddy's shop with a fan and a slinky looking tube for exhausting the paint fumes out I'm nervous but also wanting this to be my best paint job ever I have poured concrete for over 30 years so I get laid off in the winter time so now is the time to paint for me I am going to put my life and soul into this paint job I also would like to tell u thanku for all of the videos that u have made I have spent ma y hours watching them I learn something new each time I watch one u r an unbelievable painter a true craftsman I have watched many paint videos from different men but yours always seem to make the most sence if I Remember right u r a gym teacher by day and painter by night what a stud I take my hat off to u I do many jobs to make ends meet myself but painting is something I love to do your videos helped me alot that and fn things up lol ok sorry for rambling I just wanted to tell u thanku and if u could send me in the right direction for what kind of paint and clear coat I would really appreciate it thanks again for all of your hard work u r a master of the game

[@ssjred-lando6649]

Would this be better than a MAXI or should I stick with it?

[@69pacecar]

Does anybody have any idea what the difference is between this Vevor Pro Spot (reviewed) vs the Vevor GD90e? They both seem to do the same thing and are both 3000 watts. I've not yet found a comparison and can't quite discern the difference. Any help would be appreciated.

[@mikeodonnell7446]

How would this work on older (60's 70's) vehicles with thicker, heavier sheetmetal than current vehicles?

[@eaglesfly7915]

U would be surprised but obviously it's not gonna pull out really big crimp spots of metal but it does work great !!!

[@SleepyBackpacker-kh1rs]

Tanks for you sent me product how much price

[@wellesleylawrance2038]

Where to buy this machine. And possibly price

[@ypcomchic]

How about using super thick silicone shapes, ball or rectangle, to stick inside the door panels and blow them up to push plastic or metal out. No pulling.

[@whpony96]

I will stick with PDR. After watching a talented PDR tech work his magic on 3 of my mustangs I won't go look any further.

[@kingsway731]

That sure beats studs

[@iankam5980]

Does this product work on aluminum? If not any chance doing something for pulling dents on aluminum? I know product exists but what is a good affordable one?

[@thruitallauto2538]

I’m not a professional body man, that sounds funny coming from an expertise painter

[@brianbaker6196]

where do you get that stud welder and how much?

[@edgartafoya]

amazon for less $300

[@sl33per1]

I would have liked to have seen what the dent looked like before and after the pdr guy, before you sanded it down.

[@mjcompanies]

Link to the tap down hammer?

[@PaintSociety]

Check description. Just added it

[@kevinwilliston2814]

Nobody has said anything about the 20amp breaker 15does not do well

[@johnnystoka6625]

What about their even cheaper version ?

[@albertocuellar6406]

I have a question sir, when using this machine, do you have to disconect the battery?

[@PaintSociety]

Yes you should

[@donnymitts7277]

What did you pay

[@GusMahn]

What does this unit cost?

[@PaintSociety]

Description

[@henryar5666]

So this ain't going to work on an old vehicle with thicker metal I have a 69 Chevy Caprice and I just ordered one of these tools

[@v1-vr-rotatev2-vy_vx31]

You should be able to do this entire demonstration without saying a word

[@ryanwolfe911]

The 110 one kinda sucks. I switched out to the 220 version and it’s WAY better

[@LygerTheCLaw]

i have a few vevor tools, they have been ok. its nice to see a chinese company stick with a name, because they actually try instead of all the others who disappear after a month and rebrand once they have handfuls of returns and refunds pending.

[@michalgebre1289]

chena matral

[@torowazup1]

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

[@richardharvie6719]

#Gen2garage #TommyHoskinson