Fujifilm XT4: High and Low ISO Settings Location

[@lyzhengyehang1154]

I’m really looking forward to your xt4 review!

[@pal2tech]

Thank you!!!

[@elmotorista7657]

How about the ISO settings for video can I lower the ISO from 640 to 160? Thanks in advance

[@snsokstan]

Hey Chris, 3 of us have posted a note that our Button Dial Menu does not show these high and low ISO setting options as seen at 2:00 min into your video. They just aren't there. Do you still see them in that location with firmware version 1.1, which is the latest?

[@jmgrnoc]

Hello, you managed to solve how to put the extended iso, my version of fuji xt4 does not appear those options either, thanks😅😅

[@snsokstan]

@@jmgrnoc I learned that you can't access extended ISO if the shutter is set to Electronic. When I set the shutter to Mechanical, the extended ISO can be accessed.

[@jmgrnoc]

@@snsokstan thanks ;)

[@vgegaming2810]

@@snsokstan I still couldn’t access. 😢

[@paulvotaw3886]

​@@vgegaming2810 did you figure it out? I have the same problem.

[@danielwalker4463]

Is it possible to go below ISO 640 on Movie Mode?

[@halod5345]

hi the minimum iso for still and movie is both 160. How to get the iso 80? Thanks in advance

[@furstyferret81]

Love the little music pre intros!

[@blutac318]

Just need to say it... I love your t-shirt. Looking forward to your X-T4 thoughts. I value your reviews because of your thorough evaluations, and thoughtful conclusions. Not everyone is the same with theirs! Hope you had a great weekend. Andrew

[@pal2tech]

Thank you so much Andrew!!!!!! 👍

[@EduCrakie]

Chris, could you do a video about "gear transportation" and the best camera backpacks you've ever tried?

[@pal2tech]

GREAT GREAT GREAT suggestion! Currently, I literally have been throwing everything into a gym bag (not kidding!) as I'm so damn rushed for these video shoots, but yes, I have some opinions on backpacks as well!

[@street_biologist6727]

@@pal2tech Great suggestion by @EduCrackie's Channel. Would be looking forward to your suggestion. I'll be especially interested for one that can be used in minimal travel.

[@Your_Average_Joe.]

I have watched your videos for some time now, just want to say thank you

[@pal2tech]

So nice of you!!!!! Thank you so much!!

[@akushon_kamen]

Is this only available on still mode? Cus when i switch to video mode, it seems i cant use or set the low and max iso or even ss..

[@JoseTorres-rw6zz]

wow Pal, I love your videos I get new T4 and the videos are valuable info for newies!! Tnks from Puerto Rico!!🇵🇷🇵🇷🇵🇷

[@BenjaminKanarek]

Thanks for this..my X-T4's are finally arriving tomorrow.

[@papamedvejon]

Thank you! Finally I understood how to put iso 80!

[@paradockz]

I appreciate you taking time with your review, a lot of the reviews of the camera on KZbin feel like the old QVC ads on TV and I feel some of the complaints are from users that have not explored their device!

[@pal2tech]

Thanks Renata! LOL, I remember those QVC ads! I think somewhere in some Holiday Inn somewhere there's a TV still running them. Oh those days (the 90's I think?).

[@mr_jarble]

love the update on the xt4

[@pal2tech]

👍

[@root9065]

Hey, I see my comment in that list :D great video as always Chris, one more thing: The L iso values (125, 100 and 80) also don't show if you shoot in electronic shutter mode, as I'm sure you are well aware because you mentioned it before - only writing it here for those who haven't watched that video yet. Slightly off-topic because the only way I know how to talk to you is in your comments section - relating to auto ISO - on my X-T4 w/ 18-55mm what I noticed is that there is some f*ery going on in "multi" metering mode, where it overexposes the highlights, and in auto ISO (manual SS/manual aperture) it comes up with a higher auto ISO value (about 1/3 of a stop higher) for the same SS/aperture values, than if you expose in "average" metering, which always delivers a lower (or I guess proper) auto ISO value. Of course "average" metering distributes the exposure evenly across the entire shot, but to me, that is a win-win given I get lower ISO and it doesn't blow out my highlights the way multi does. You haven't asked for this - just thought I'd share, perhaps a topic for a future video :D

[@pal2tech]

Yep. And I thought it was me going bats--t crazy with this also. Yes, I almost never meter in multi mode if I can help it. It does seem to crank up the ISO more than it should. Definitely a topic for a future (or many RANT) video, LOL!

[@root9065]

@@pal2tech I wanted to follow up because I got distracted and missed the last half of the video, about X-T4 review. I've bought this camera about a month and a half ago, after I did my homework on all the reviews out there, even so, it's your review that I look forward to the most ;) I actually do appreciate that you aren't rushing it. All too many content creators do, just to push a video out. Have a great weekend sir!

[@pal2tech]

@@root9065 Thank you... you too!

[@arekdetmer1]

@root9065 Thank you for your comment! I couldn't figure out why I didn't see ISO high and low, I didn't know that it depends on shutter mode. Thank you! @pal2tech Thank you for your videos, I've watched many of them, you are doing amazing job!

[@Mindartcreativity]

1:43 I just checked on my X-Pro3 and it looks like dialing through "C" only goes up to ISO High value on that camera... no scrolling through ISOA1-3, which is a bummer! It's either a bug or missing...

[@urdium]

Same on X100V :-(. Anyhow, on X-T3 you can get away without the C setting, use A and in the menu change ISO Dial Setting (A)” to “Command".

[@JessieLeTV]

Thank you for this!

[@pal2tech]

My pleasure!

[@IndecisionTelevision]

So does the the hight and low ISO not work at all in video or are the setting s just missing. I'm guessing they just dont work but it isnt enirely clear. a bit too fast

[@ZekeFast]

I still haven't bought X-T4! So, I eagerly wait for your review!

[@princetarun]

Iam having xt3 Kit Lens Right , what is ur highly recommend 2nd or 3rd lens for Wedding & portrait Shoots 🙏🏼

[@pal2tech]

Viltrox 23mm f1.4 Fuji. Great prime with a lot of flexibility for wedding. Portrait you will want 56mm prime. Or even the 35mm f/2 is a wonderful lens.

[@princetarun]

@@pal2tech Thanks Alot Sir 🙏🏼

[@lucashan322]

I have a question about XT-4. I cannot find the ISO dial setting L in menu which shown in your video. Whether the firmware version has changed? I'm using the latest version. I'm in struggle with damm ISO 80

[@vgegaming2810]

I got the same problem like you, buddy.

[@berkdeniz]

i have an xt4 camera and iso dial is not changing my iso on movie mode. i looked everywhere and cannot find a way. can you please help me?

[@commander_Youtube_DE]

video mode not high iso ??

[@pal2tech]

?

[@commander_Youtube_DE]

@@pal2tech not 51200

[@exerciseenlightenment8855]

Thank you for this “fast” tip, making my learning fun! Newbie but learning much here.

[@pal2tech]

You are most welcome!!! Have a great weekend!!!

[@AxelFoley-sb5re]

But what if I want to control my iso for video 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

[@robertsiqueira9899]

Another great tutorial!!!

[@pal2tech]

Thanks Robert!!!!! 👍

[@xavienpowell8075]

How were you able to get a lower shutter speed of 50? Mine only stops at 60

[@paulm8157]

Smooth follow up to auto iso vid. Nice catch on movie mode dial snag. Greatness takes time. Make no wine before it's time, as they used to say. Of course, wait too long and the stuff turns to vinegar.😊 Look forward to your XT-4 review; hope it will be based on most current firmware updates.

[@pal2tech]

Thanks Paul! Yeah, they just released that supposedly resolves the exposure stepping problem on Auto-ISO. I'm testing that now. Love the wine analogy!

[@channelofkamal]

I still can't see below 160 ISO in still mode. Is this because of RAW/JPEG file format?

[@snsokstan]

Same situation. In still mode, those high and low ISO settings don't appear on menu 1 of 3 shown at the 2:00 mark on his video. I wonder if it's a firmware difference.

[@imAnsar]

super helpful

[@pal2tech]

Thanks!

[@gavancaldwellmac]

Thanks once again for putting me right on my Auto ISO setting - When I used my canon 5D ML 1V you just set ISO on Auto and nothing more to worry about while Fuji T3 seems to be a little complicated.

[@arunvargis]

Nice and good video

[@pal2tech]

Thanks Arun!!!

[@prateekbhardwaj9943]

in fujifilm xt200 i am struggling to set iso lower than 400. in night. in day i can see 200,100 also.. not sure whats wrong i m using softbox

[@tonyelsom]

Thanks Chris, something to keep in mind if I upgrade from 3 to 4. At this stage I am not contemplating upgrading to xt4 but you can try and convince me when you do your review.

[@Mr.HarryPotter]

X-T4 - Hi: When I used to click on the "Rear Command Dial" to check the Focus, it always worked but now it randomly magnifies the scene or nothing happens. I am talking about "Auto Focus" Stills photography NOT Manual Focus Mode. Of course, the Rear Command Dial focus check works in Manual Stills and Video modes. Is there something I am missing? Thank you.

[@pal2tech]

When it's doing that, what are the other settings, i.e., AF-C, AF-S, etc. set to and have your checked into the AF/MF settings menu to see if anything is amiss there?

[@themadgreek]

I am in STILL mode and still don't see all the ISO values...did the menu change with the firmware (1.03) update?

[@snsokstan]

Me too. Did you ever solve this?

[@youhuiyuan3324]

Hello, could you pls help me promote a memory card?

[@abdullahabualrub8486]

I have an issue. In 4k 60fps my iso is stuck at 160 no matter what I do, how do I change it, in photo it's normal I can change it

[@tammysypniewski1891]

Looks like I have some catching up to do with your channel. Quarantining with Pas2Tech. 👍

[@pal2tech]

Hey there how ya been?? Yeah, quarantine content for everyone these days. It's like we all got reset back to early March. Grrrrr....

[@christopherbgriffith]

Enjoying the increased cadence of videos. Great stuff! Other than IBIS, the ISO C mode is the first feature that kind of makes me kind of envious of the XT4...

[@pal2tech]

Thanks Christopher! Yeah, IBIS is the big draw, but trust me, the XT4 does have some issues (at least for me). I'm working on the final stages of testing now for the video!

[@lawrencemernagh5778]

Hi Chris. I am looking at upgrading from my xt1, which I still really like. Right now I can buy a used xt3 with a cheap lens for $1200 Canadian. But I have been watching videos about the xt4 and it looks impressive. But it’s $2300 just for the body which make me wonder if it’s worth the extra $1100. Thoughts?

[@pal2tech]

Get the XT3. Now I don't know your shooting style or needs, but the XT3 is perfect in just about every way. The XT4 does have better video, but the video on the XT3 is damn good. Unless you absolutely need IBIS, the XT3 is the best mirrorless camera around and the best deal you'll find. Save the extra $$$ and get yourself an extra lens or something.

[@theCameraVille]

I cant wait to see your X-t4 review. Gosh,. I need to do a review as well. Is 4 years, after a release, of a camera too late to make a review? I'm jk! I should make one. I'm going to torch it with all these new advance camera coming out. Yup. This is going to get so ugly on my end. lol.. Have a great weekend!

[@pal2tech]

Haha, 4 years is just getting started!!! I see a review in your future!!!!!!

[@kencox6166]

Thanks that would explain why mine was stuck on 200 iso when I switched to C, I must have knocked the dial. I may not take my manual with me when out and about, but it's good to know you have our backs 😁

[@polipomm]

Goood t-shirt MR. !!!!! :D

[@polipomm]

I mean the first one ! :D

[@pal2tech]

Hahaha, thanks!!! Love that park!

[@711Hans]

Besides movie mode, another setting that prevents low and high iso from appearing in command mode is electronic (ES) shutter. I was just tripped up by that one.

[@lordoftheflings]

aaaah! thank you!

[@paulvotaw3886]

Any other things you've discovered? Mine won't go there with mechanical shutter in photo mode.

[@shahid28285]

I have my settings in still mode, and have put my ISO settings to 'c' but I see no ISO Low or high showing up, on using the scroll button. The problem is low/High ISO doesn't show up in HDR setting 😐

[@street_biologist6727]

Hi Chris: Picked up the XT4 yesterday and traded in the XT3; I am yet to see if I made the right decision. Just this morning, I was wondering about the Hi & Lo ISO setting on the ISO dial and here you're!!!! Thank you for solving the problem for me. By the way, I have started looking into an L-bracket for the XT4. Many members from one of the FB Fuji groups suggested the Smallrig L bracket for XT4. Do you have any suggestion? It would be greatly appreciated. Thanks!

[@pal2tech]

Congrats on your new camera! Yeah, I have a smallrig cage for my XT4. I don't have an l-bracket yet, but if smallrig has one, that would be the one I'd get. Smallrig makes some great stuff and I've never had any problems with them. I usually just leave mine on the cage so don't have one just yet.

[@street_biologist6727]

@@pal2tech Thank you Chris! I am inclining toward the Smallrig l bracket with silicone grip. It's on back order. I'll wait a few days and then place an order.

[@gaetanomagliuolo]

G R A N D E. IMPORTANTE SPIEGAZIONE SUGLI ISO G R A Z Z I E E E E E E E E E E !!

[@daveo544]

Thanks for your videos 🙏 You have taught me many things 😊 I had this issue but it was because I had changed from mechanical shutter to electronic shutter. Now I'm back in mechanical I can go down to 80iso again. 1 question while on the topic. Which shutter would you recommend for focus stacking? Thanks for all of your very educational videos, much appreciated!!

[@pal2tech]

Thank you! For focus stacking, as long as the camera is on tripod and subject is completely motionless, you can use pretty much any SS. Just make sure whatever SS you choose it will ensure that your ISO is 160 (which is best place to be overall).

[@daveo544]

@@pal2tech Awesome thank you!! Really appreciate your channel 😁👍

[@laipingfung1608]

Thank you for your video. It helps to solve my problem. It's funny that I can only change my ISO by using my Rear Command Dial. Don't know why!

[@laipingfung1608]

Oh, I know the reason now. It is because I have set my Front Command Dial for Aperture.

[@pal2tech]

Thank you!

[@ruggieromanente4855]

Those of us who care about reviews that are based on real-life use of more than just 5 days, in different situations, and above all honest will gladly and patiently wait!!! Enjoy your weekend!

[@pal2tech]

Thanks Ruggiero!!! 👍

[@musoku]

x-t4 auto iso range is very weak, i cant choise max 2000 iso. just 1600 or 3200 i can choice

[@martinz.8538]

first

[@pal2tech]

🎥 👍

[@nathankarimi9228]

Hello ... any idea on how to obtain lower than 640 ISO when in Movie Mode F-Log?