Pandem Rocket Bunny V3 Install [Before and After]

If you want a job like this done and you can bring your car here, you guys can message me on instagram @Initialzed_frs
Also Buy stuff on Amazon: amzn.to/2KNazSI
---------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------
As always, if you enjoyed this video and found it in any way helpful, please hit that LIKE button. If you know anyone else who may benefit from this video, because their doing a similar project, then don't forget to SHARE this video everywhere. And if you haven't already, SUBSCRIBE.
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
For updates on new projects Follow me on INSTAGRAM
@INITIALIZED_FRS
--------------------------------------------------------------------------------------------------------
Music:
ChillHop Music:
/ chillhop. .
GYVUS - To Wherever [Chillhop Records]
GYVUS - Blue Sky [Chillhop Records]
-----------------------------------------------------------------------------------------------------------
Outro:
GlobulDub - Foreign Exchange

[@JonnyBarajas]

@Grant Tobgo If you want to see more of the car, check out the owner of this build: @inf3ct3d_hazmat . Go show him some love.

[@joeyjoe301]

Jonny The Car Doctor where did u get the front grill ?

[@JonnyBarajas]

The front grille came with the Pandem V3 kit.

[@RomansmusicTv]

the shots are so zoomed in id like to see the whole car

[@Driftprodigy01]

ItsRoman was thinking the same thing

[@ejcam1155]

That’s what I’m saying lol😂😂

[@BernsteinOmega]

Jeez! How about showing the viewers a full view of the car!?!?

[@datasian6487]

I agree, I really want to see the whole car, but sadly, I can't :).....

[@JonnyBarajas]

Unfortunately it was a timed project and filming wasn't a priority, The car wasn't in our hands long enough to have the time to film full body shots in a nicer scenery. Boss wouldn't be too happy If I were filming during work hours.

[@thaothao8324]

how could you not have time? you have time to zoom in on parts but not the whole car??? sure, you spend that time walkin around zooming in but cant step back...

[@rammy3767]

i hate when you show like 10% of the car to us, lets see the whole car man...

[@JonnyBarajas]

The point of this video wasn't to showcase the kit. You've probably already seen a rocket bunny v3. My main goal was to show my work with detail.

[@Art_thr0b]

The video is to show as you put in the description the "car" with and without (before & after) so doesnt that advise the full car with and without ??

[@theman931]

FUCK YOU JONNY DOCTOR, SHOW THE DAMN FULL CAR... FUCKING LIAR.. MAYBE HE DID NOT DO IT.. SO HE'S HIDING SOMETHING

[@static_Tricolor_camry]

It looks hot after you installed the Rocket Bunny Kit I'm planning on getting an FRS in the future I may get you to install a Rocket Bunny Kit for me but I live in Ontario Canada so it would be a long drive but worth it you did a fantastic job I'm amazed and spechless

[@julecasey2376]

Great fucking work man... god damn that's a nice job. I stay in Cali, depending on how much you would charge for a v2 install I will drive to AZ

[@JonnyBarajas]

hit me up on my insta @initialized_frs

[@cyberfrank-bx2nv]

I looked at some of your videos, we don t get to see your car run all that much, give us more please! also, I m new at this, so I never saw a bunny kit, please show more for newcomers. otherwise, you make a good sale for this car and mods, I love your work! I d love this car more than most high end ferraris and such, it makes a lot more sense, especially for my income, it d be interesting to know how much you have invested until now too. certainly around 20k, no? outchhhh!

[@JonnyBarajas]

As it is a slow build, and work taking most of my time, I rarely get to take it out to the track.

[@JuanRamirez-dn5nz]

Beautiful finish. I wish I'd be able to get this done for my frs.

[@supbirdy]

Peep those kings must rise stickers!

[@Art_thr0b]

Haha Birdy whats good bro glad you have followers here in Cali!

[@ConsciousRobot]

That "Kings Must Rise" FRS is just way over the top. He's doing too much and apparently has no sensibility for tasteful design. It's like he's putting shit on it just to put shit on it rather than to enhance the overall aesthetic. Don't get me wrong, I love an aggressive wide body look, but his car overall is just way too busy and doesn't have a nice flow to it. The side skirts look hideous with the front fender flare and I'm not even going to say anything about that ridiculously cartoon-ish wing. Just my opinion. He's very young so I get it kinda, but he will look back in a few years and ask himself "what was I thinking?"

[@xander.1342]

lol, the project rocket sticker with meowth wearing the skull mask is from kingsmustrise aka itsbirdy. he drives a rallybacker frs and actually has a channel too. I recommend following him he's pretty cool.

[@Austinomon]

Man we need someone like you near NYC man :(

[@ConsciousRobot]

The FRS gets me rock hard.

[@eneveasi]

hey, im thinking of doing this soon and am curious what size wheels and what offset you would need if you didn't want to have wheel spacers

[@JonnyBarajas]

Calvin Tower Im not sure on the V3 specs but Paul bought them directly from forgestar spec'd for v3 so he isn't running spacers. I would try contacting them or a someone running the same kit you want that already did all the calculations for fitment.

[@eneveasi]

Oh ok thank you for that response! It really helped give me a direction with this because I couldn't find any numbers online.

[@dylanjoseph6010]

Can you explain in more detail about the rubber lining between the fender and car! Please and thank you!

[@JonnyBarajas]

I used a rubber lining that can be purchased at your local car dealership, I went and asked for "over fender rubber lining" which is used on stock over fenders for some cars and trucks. In my case, the rubber lining used for the Rocketbunny came as a part on the authentic kit for the frs.

[@lts8pm]

Lol Pimp my ride Jonnythecardoctor edition

[@ConsciousRobot]

That's a nice clean widebody. If I did that I'd fill in the rivets have it molded to the body though.

[@skatborching]

What is the black stripping on the rocket bunny kit and where did you get it?

[@JonnyBarajas]

skatborching Its a rubber lining that only comes with authentic kits in the hardware bag from Greddy.

[@JonnyBarajas]

The rubber lining came with the kit, as for the bumper I used black striping tape from here: amzn.to/2zj6ZcT

[@ZaySean16]

Good job man, love your videos

[@ravensharpless]

"If it gets lowered" I almost feel like coilovers, wheels and tires should be included in body kits. There is an infuriatingly high number of cars with body kits that have stock springs and stock wheels with gross looking affordible all season tires, and the kits should also include a "Guide to good fitment" video.

[@Pharaoh_The_Great]

My favorite kit

[@oso284]

Looks so nice I hope I can get mine done but I live in Ohio

[@ravenschamps2058]

Dam looks fucken sick would love to do that to my 2016 frs

[@phenglyngor3256]

DAMN thats clean

[@rookietoprobuildz]

Yeah whenever I eventually Rocket Bunny, I'm taking it to a professional. Arizona isn't to far of a drive !

[@connorwebb29]

Are rocket bunny kits cross compatible? I’ve been thinking of going v3 but I don’t like the vents in the rear fenders and side skirt. I there any way I could buy the front fenders and run v1 or v2 skirts and rear fenders?

[@JonnyBarajas]

They aren't made to be cross compatible, but i'm sure with a bit or bondo and glaze, and modification, you can run a frankenstein widebody kit to personalize it a bit.

[@moisses12345]

i have a question, can u install the v3 rocket bunny front just the front bumper with v1 front and rear fenders???

[@motivateYu]

Is it just me or did he go from Aftermarket exhaust burnt tips to stock? at like 4:45 they were burnt/titanium tips, and 6:11 they were stock??

[@tnights5113]

No wonder it fits soo good, got dayum 4500 and it isn't even cf?

[@thaothao8324]

can you please zoom in a bit closer so i cant tell want kinda car is it hahah, keep up with the zoom in video next time zoom in on your face too and tell us what car is it xD hahaha

[@thaothao8324]

Sorry for the rude comment man, enjoy what u doing, keep up the good work

[@datasian6487]

heyyy he got stickers from birdy! xD

[@tijojo11]

isnt there carbon cannard on the back on the v3

[@kurtdanniel8541]

guys pls do not bash me but, what is pandem? i know what rocket bunny is but im seeing alot people saying pandem and rocketbunny is different but similar pls explain

[@romariosmith422]

What's the wheel fitment? Good lord I might get me a Toyota86

[@allangrant1326]

Thinking bout giving my civic eg the rocket bunny treatment Is the kit plastic or fibreglass?

[@freshboosted2569]

clean

[@adryanlaksana]

ayee! Remember me from IG 😂😂 lol.

[@timyang4710]

Jonny, do you do wide-body kit molding instead of rivets?

[@leonardoarredondo8680]

What brand was the kit from?

[@JonnyBarajas]

Pandem Rocketbunny v3

[@Sonjay333]

what kind of rubber gaskets did you use for the kit?

[@JonnyBarajas]

The rubber lining is included with authentic Rocket Bunny kits.

[@MsOMGwtfnoOb]

Did you buy all the piece from Amazon ? is it the real V3 or replace btw you look like an Filippino actor in the Philippines lol

[@JonnyBarajas]

I only installed the kit, this isn't my car. They got it from their site: shopgreddy-com.myshopify.com/collections/rocket-bunny-pandem/products/17010270

[@MsOMGwtfnoOb]

Oh thank you for the site

[@fongvang6814]

Where can I buy that rubber seal for the kit I'm gonna be doing one on the s2k and will love to where I can find it thanks

[@JonnyBarajas]

its called "Rubber fender liner", I buy mine from toyota or honda. It's used for their oem fender flares.

[@fongvang6814]

Jonny The Car Doctor thank you very much

[@_ash__li]

Can you still use stock front bumper

[@JonnyBarajas]

You can, just note the over fender that goes on to the front bumber is molded on to the bumper, it'll just look a bit odd without the rb bumper.

[@Driftprodigy01]

Mmmmmmmmm that wheel cap thoo

[@Fastnismo999]

Stupid question but can you put a rocket bunny v3 on a 2017/18 Toyota 86??

[@hunter5736]

Marshall Lilly yes

[@alexcarrillo694]

using spacers? if so, what size?

[@JonnyBarajas]

He's not running a single spacer. These wheels were made for a direct fit.

[@MadameZelda15]

So what site did you buy your body kit ?

[@JonnyBarajas]

This V3 Rocketbunny was for a customer who bought the kit and needed an install. shopgreddy-com.myshopify.com/products/17010270

[@wigglethetoe]

Where did you buy the mesh for the back ?

[@JonnyBarajas]

I used the mesh that came on my Seibon hood vents on my FRS and spray painted it black for this build. I don't suppose the mesh will be hard to find.

[@hennessy6612]

What are the wheels

[@rho1zuwan]

You to zoom a lot is it?

[@p0613v]

Lol at the inserts. Looks like chicken Fence.

[@aj08medecine3]

Hey Johnny. I dont have instgram or.facebook. but i really want to speak to you about my car. I.have the pendem v3 in hand. With my rims.also. how can we get in contact for further info? Please let me know. & the the work looks really good by the way.

[@JonnyBarajas]

Easiest way would be through insta or facebook dm. Don't check emails or youtube as often. Thanks.

[@aj08medecine3]

Jonny The Car Doctor how would.i find u on facebook

[@aj08medecine3]

Jonny The Car Doctor look.out for tenochtitlan auto care

[@JonnyBarajas]

my facebook is facebook.com/jonny.barajas

[@jamesfigger7701]

Lil dirty but he likes it!

[@DeZiRELobbies]

What about for a 350z?? I live in vegas lol

[@JonnyBarajas]

I haven't done a 350z, but I didn't know how to do an frs before I tried.

[@DeZiRELobbies]

Jonny The Car Doctor well when i get the kit if youd like we can try it

[@JonnyBarajas]

sounds good, we can talk on ig @initialized_frs

[@lylebarin4317]

@kingmustrise also your fan?

[@JonnyBarajas]

Just client who had a Kingsmustrise Sticker.

[@lylebarin4317]

Jonny The Car Doctor sorry hahaha but nice frs man. Livery of the Tofu car. Takumi

[@JonnyBarajas]

Thanks man.

[@Playboyer670]

can't believe you used those ugly ass screws tho.

[@theman931]

DUDE THE CAMERA MAN REALLY SUCKS. MOVE BACK SO WE CAN SEE THE WHOLE DAMN CAR ...

[@JonnyBarajas]

This video focused on the fitment, everyone knows how the kit looks. here's a video of the whole car: kzbin.info/www/bejne/i4CVZJlrjteZl7s&lc=z22csvqovz3ayh3kjacdp434jxdj1kddn2sgzoqxlg5w03c010c

[@Jay-wl9tp]

You literally showed the body kit with a 100x zoom. That was dumb bro.

[@xdivineHART]

100th view, 10th like. whatzup?!?

[@fernanadosoto7607]

TALK WAY TOO SLOW SPEED IT UP BUD

[@vicx05]

play it at 1.25x speed

[@alizonda3891]

Just wanted to say you photograph sucks you even didn't show us the car