BATTERY POWERED FOAM ON THE GO! | IK e-Foam Pro 12 Sprayer

[@PanTheOrganizer]

🔥 For more quality detailing products visit: bit.ly/3BiPe3o ⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: IK e-Foam Pro 12 sprayer (on THOR): bit.ly/3Y1Hhai IK e-Foam Pro 12 sprayer (on Car Supplies Warehouse): bit.ly/3lBhsyb IK e-Foam Pro 12 sprayer (on Amazon): amzn.to/3AAgB8w IK Foam Pro 12 sprayer (without battery compressor): bit.ly/3ZQXRfD IK Foam Pro 12 sprayer (without battery compressor): bit.ly/3QYYDkd IK e-Multi Pro 12 sprayer (non foaming version, with compressor): amzn.to/4cr6n8J IK battery compressor: bit.ly/3Hnm6Zl IK Foam Pro 2 pump sprayer: bit.ly/3XQbicX IK Foam Pro 2 pump sprayer: bit.ly/3GXWXTA SPTA foaming sprayer: amzn.to/3RloYI8 Phoenix EOD APEX Auto Wash shampoo: amzn.to/3QYA9rx 🇨🇦 For people in Canada: IK e-Foam Pro 12 sprayer: bit.ly/3QXZH7R IK Foam Pro 12 sprayer (without battery compressor): bit.ly/3VqhPcC IK e-Multi Pro 12 sprayer (non foaming version, with compressor): tinyurl.com/2p9v82yz IK battery compressor: bit.ly/3D6ZGce IK Foam Pro 2 pump sprayer: bit.ly/3iTB7bJ SPTA foaming sprayer: amzn.to/3cvmiJi Phoenix EOD APEX Auto Wash shampoo: bit.ly/3HXst6p 🇬🇧 For people in the UK: IK sprayers: bit.ly/3j2lLBL 🇫🇷 For people in France: amzn.to/3J6LX9g Watch more of my videos: ✅ Cordless detailing tools: kzbin.info/www/bejne/bWbLd3yQl5erbq8 ✅ Battery powered sprayers: kzbin.info/www/bejne/m6Skg4Jrdtd1jpI ✅ Battery powered polishers: kzbin.info/www/bejne/pZqwfniFmb10mKc ✅Video on the instructions for the assembly of the IK E-Foam Pro 12 sprayer: kzbin.info/www/bejne/aGrOg36DobuHm80

[@BondsIsKing]

As I watch your videos I grow to care more about my truck. We have been getting more and more snow here in MN. Do you have a suggestion on safest brush to clean snow off?

[@odiespankers07]

Can you control what psi the compressor pumps to, or is it specific? Wondering because this compressor could also be used to pump up tires, etc.

[@fillflashdetailer8838]

I bought one of these a couple of months ago, and in all honesty, has been the best accessory purchase I've made in years. Expensive, but worth every penny.

[@aimonecastellacci1618]

Good Morning Pan! I see your videos and I especially enjoyed the one in October with Matt from OG! Just 1 question- I drive my GTD gold here roughly 100 miles a day here in Florence, Italy and I need to put a coating on my wheels- I used Csl+ exo in 2021 when I first purchased it, and then Geyon Synchro last year . Both did not last long! What is your advice? Matt now adds DLux +gliss- After I wash my wheels I also top them with Geyeon wet coat! Here in Italy a lot of people use this local brand Labocosmetica! Thanks

[@Ridth-one]

Yup, it's expensive but then again, worth it. Can't wait to get the compressor attachment when available here in my country!

[@The1Music2MyEars]

@@Ridth-one Are you able to plug it into an outlet? Batteries don't last forever, and capacity goes time with each recharge. After 2 years, no one knows battery capacity

[@cheesedoodle2327]

Do you use in in place of your pressure washer

[@fillflashdetailer8838]

@@cheesedoodle2327 No, it's not a replacement for a pressure washer, but it's great for applying a pre-rinse, APC, wheel and tire cleaner, etc. very efficiently

[@andrewzhang5457]

I bought a battery-powered tire inflator and build my own version of this e-Foam sprayer. I am glad that IK releasing its own version.

[@Sixcats4ksu]

A year ago I bought this foamer and added cordless air pump for additional $30 and use it exclusively at coin-operated car wash…pre-pump with my home air compressor then hook air pump to shrader valve…works great and don’t have to use industrial soap from car wash.

[@MotoKDub]

What is the difference between a pump and the built in pump?

[@dvlop0018]

I just love how Pan’s car just sheets the foam. Awesome product video. Thanks Pan

[@PanTheOrganizer]

Hehehe thanks man!

[@mdthedetailer2060]

Every time I see your garage I’m jealous!! Great video as usual. Superb coverage with the sprayer. Very consistent. Thanks Pan.

[@PanTheOrganizer]

Glad you enjoyed it

[@mdthedetailer2060]

Always do. I did send you a message on your actual website. I was contacted yesterday about winning a pressure washer and the IK foam cannon. It was from your KZbin platform. It asked for financial information to pay for the shipping charges. I’m just concerned if this was legit or somebody hacking your online platform. Sorry to bother you.

[@yvesst-jacques3989]

I personally have the ik foam pro v2 and I just use my air compressor, works just fine 🙂

[@GeorgePap99]

I like how you always explain the way of thinking behind every technique or the use of a chemical, Pan! I like knowing how things work, because obviously I understand when and how to make better use of them, but it also helps (as I has help me) learn always more.

[@PanTheOrganizer]

Thanks for the kind words George. I always appreciate the support and positive feedback. :)

[@neilwalker5041]

Sweet looking product Pan which would make life easier. The only improvement would be an indicator of battery life without taking off the cover. Thank you and enjoy the cool sprayer.

[@PanTheOrganizer]

Good point!

[@aldaley3537]

Marolex, IK, and Pressol sprayers are all awesome for their intended purposes. I use a large volume DeWalt pump foamer similar to this IK foamer.

[@joevanseeters2873]

That IK is definitely the "Ferrari" of Pump Sprayers. The battery is a nice option on the IK for people who do not have an air compressor. Hope you are well Pan the man! Spring is not that far away buddy. It's almost 80 degrees here in Louisville, KY today and a very nice break from a brutally cold, windy, and wet winter we have had down here in the Ohio Valley.

[@PanTheOrganizer]

You're lucky Joe! Here we are still near freezing, and so much snow outside it will likely take until May before it melts haha.

[@videomaniac108]

Thanks for showing useful items like this, Pan. I just got the Ik 12 pro manual and love how it works. I mix a 4% solution of Gyeon Foam in distilled water in the tank with the grey(default) solution metering hose and pump the tank up to the max pressure(about 60 psi). The result is great quality foam that clings very well to my coated car. Because it's a pump sprayer, it's more economical on the amount of expensive soap that I use and also uses less water than the foam gun I had been using. I use about 2 liters of solution with about 80 ml of soap to wash the entire car.

[@PanTheOrganizer]

Thanks for sharing your personal experience with it. It's a nice tool to have in one's detailing arsenal. :)

[@functionaldoc5054]

I Own the IK E Foamer and love no more pumping and especially use it with DIY Rinseless as a pre rinse . I would recommend if storing product in the foamer make your solution with distilled water for longer term storage.

[@levelbest6142]

Having a hard time justifying NOT getting that attachment for my IK Foam Pro 12 😅 seems like a no-brainer. No more pumping and no hauling out the (much louder) air compressor, looks like a winner to me

[@PanTheOrganizer]

Yeah bye bye pumping for a few minutes haha.

[@bobbyd224]

Pan would like you to do video on the new tw fix a scratch kit … thx for all your videos

[@PanTheOrganizer]

Thanks Bobby! I'm currently in the process of filming some cool stuff with the new TW products, so stay tuned! ;)

[@angelofrederic]

Way to go Pan, its now on backorder. Best seller on the tube. congrats

[@PanTheOrganizer]

I can’t control that lol

[@ShineYourLightDetailing]

Wonderful! Thorough comparisons are very important, so consumers and detailers can make an informed decision before they purchase. Thank you Pan, great video!!

[@kimnewling5728]

Hi Tim

[@ShineYourLightDetailing]

@@kimnewling5728 hey Kim!

[@PanTheOrganizer]

Thanks Tim!! I always appreciate your input and feedback.

[@trappn]

I enjoyed the video, as always, but am not sure why almost every product demonstration on KZbin has to be a shootout between two products. It's fast becoming a stale model. In this case, especially, we're not really comparing apples to apples. The IK-e's in a class by itself.

[@Speedfreak_ZX14R]

Thank you for making this video. I found the solution to overcome my challenge.

[@PanTheOrganizer]

Glad it helped!

[@dannysandoval5195]

Another great demonstration video Pan. I like IK Foam Pro 12.

[@PanTheOrganizer]

Thank you! Cheers!

[@Deep6ep]

I have looking into this foam application tool. Thank you for the video. I was hoping for a demonstration of the 3 different tips ie.. green, gray, orange before I decide to purchase.

[@PanTheOrganizer]

That's a lot to ask! HAHA. I just keep the regular tips and it works just fine.

[@jlb3675]

I just got the IK pro foam sprayer the other day, haven't had a chance to use it yet. So very timely video Pan! Thanks. I didn't get the battery pack though although down the road I might add it. I just picked mine up for $100 though. I ordered from DIY and used a code from another detailer to get the cost down to $100.

[@michaelmosca678]

May I ask who you ordered it from (DIY?) and the code that you used? Thank You.

[@PanTheOrganizer]

Use my link: diydetail.com/discount/PAN That automatically applies a 10% discount for you during checkout. So click that link, search for the IK Foam Pro 12, add it to your shopping cart, go to checkout, and enjoy it at the discounted price. ;)

[@michaelmosca678]

@@PanTheOrganizer THANK YOU!!!!

[@jlb3675]

@@michaelmosca678 sorry i didn't respond sooner i didn't see your question. I ordered it right from DIY's website and I used the code LAVORODIY although Pan also has a code for 10% too. Hope this helps.

[@michaelmosca678]

@@jlb3675 Thank you.

[@ingvarjohanngubergsson1181]

Great option for those who dont have pressure washers. Myself will still prefer the original foam cannon

[@PanTheOrganizer]

I also prefer a foam cannon with a pressure washer setup. But yeah for those who don't have those, a battery powered foam sprayer like this is the next best option.

[@amoni1959]

Great review. 👍🏾 I got the foam pro 12. Use it in the wintertime in my garage. It’s the best. I got an compressor near by so I won’t get attachment. But is good for a mobile detailer or someone who loves in a apartment/condo.

[@PanTheOrganizer]

Thanks!

[@jasondoolin6476]

Hey Pan! Good day, from FL! This looks incredible. Like a game changer, for personal use.

[@PanTheOrganizer]

Agreed!

[@teknykill]

So I can always count on PAN! I was not thinking then i said shoot Pan most likely has this review lol. with ur help man! Got cordless power washer and now this guy , Now I can presoak etc in parking lot at my place.😀 I use little Ik foam 2 for rims .

[@PanTheOrganizer]

😁👍🏻

[@scorpion-ninja8228]

This might be a great option for use cleaning RTUs in Commercial HVACR industry! I'll have to show this to my boss and see if shell buy one for us to use at the shop on spring PMs!!! I could "borrow" it on a weekend to use on my Motorcycles! lol

[@alexh5343]

Was looking at the IK sprayers for a whike but got a Worx 649 instead. I hope EGO will come out with pressure washers at some point !

[@richardseem7948]

Awesome video and product review good friend

[@PanTheOrganizer]

Thanks so much

[@JCKICKS213]

Just bought two of this from the clean garage .. going to buy a 3rd one soon have different products in them ready to go.

[@DenisSkobelev]

Круто! У меня такой же, но без компрессора. Подключаю Электро компрессор для подкачки шин для поддержания давления. С батарейкой, конечно, веселее

[@KonstaNykanen]

Really cool foam sprayer the IK e-Foam Pro 12👍🏻. Nice work Pan!

[@PanTheOrganizer]

Thanks! 👍

[@KonstaNykanen]

@@PanTheOrganizer 👍🏻❤️

[@ddautodetailing]

I have iK without the battery. Definitely need to use it more often!

[@dandydonslife9869]

Great tutorial on IK sprayer.

[@PanTheOrganizer]

Glad it was helpful! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@krishall3187]

I pulled the trigger and bought this unit for manily my winter washes at local car wash bays as i cant do it at home cause its so cold here in Minnesota in the winter. Looking forward to its first use.

[@PanTheOrganizer]

Nice 👍

[@dany5449]

6:15 trying to understand the ratio used with the Apex soap in the Ik sprayer. Is it 120ml (4 oz) for 4 Liters or 1oz per gallon (6:23)?

[@kimnewling5728]

I.K. It looks very cool. How much does does it weigh when full of chemicals and ready to go? Very cool car!!

[@yoji8130]

this would be great for mobile detailing

[@PanTheOrganizer]

Absolutely.

[@tsatsmana]

If it wasn't the high price I would definitely buy that, very useful.

[@larryhernandez769]

Great stuff 🙂 thanks

[@PanTheOrganizer]

Thanks for watching!

[@G20Gabe]

I use the Ik foam pro 12 alone as my foam cannon it’s 100% better then the foam cannon that attaches too the pressure washer it’s way less runny and sits on the paint longer giving u more time especially in direct sun which as a professional detailer I’m in all the time I’m incredibly glad IK released the air compressor pack they know them selves the Ik foam pro 12 has insane potential too replace traditional foam cannon also saves me more water considering I only use my pressure washer for rinsing instead of rinsing and foaming the psi on the IK is perfect

[@HarryBallsss]

Hi! You currently just use the pump portion of this? How does it foam up compared to what Pan demonstrated? I’m trying to decide on whether to get the tank itself or with the battery…Thanks -

[@G20Gabe]

@@HarryBallsss yes I’ve used both the pump version is fantastic for sure works well and produces good thick foam that isn’t very runny the battery jus makes it way better takes out the need too pump

[@HarryBallsss]

@@G20Gabe thanks so much for the reply, my friend. I’m only buying it for myself and my car only. Is it a lot of pumping for one car? Like, would I need to pump multiple times for one car? Which would you say I go with? Thanks again!!

[@G20Gabe]

@@HarryBallsss ofc bro and depends how much you fill it up the less air the less pumping the more air the more pumping my advice too u is fill it with a gallon of water then whatever soap of your choice but in terms of how much it needs too be pumped it does take a bit of pumps for it too be at max pressure but for me it’s no issue but the battery is 100% worth it regardless if u wash ur own car or detail car’s professionally like I do

[@HarryBallsss]

@@G20Gabe sweet!! Yup, that makes total sense. One last question, pal - is this pro 12 way better than the pro 2? I’m guessing so. Like wouldn’t the pro 2 be good enough?

[@Tanner_Teves]

Man this would have been so helpful to have had when I was living in an apartment. My last car was wrapped and I couldn’t use the soap at normal car washes since it would stain the wrap so I used to only do the contact wash. Was always looking for a portable foam sprayer and this would have been legit!

[@PanTheOrganizer]

Thanks for watching!

[@mact153]

I have the smaller sprayer under a different name , works good for me as I have a smaller car but ik is the one to have if your cleaning cars all day long

[@Trewth_Hurts]

That is absolutely amazing. I will be moving into a new shop this fall so this will open up huge possibilities for washing indoors with little to no noise. Also, I am hoping you can demonstrate how well this works on an every day vehicle with light dirt and dust I am interested to see how much of the dirt lifts off and falls to the ground. Keep up the great videos. I can’t wait for the next one. You always do amazing content. Thank you.

[@PanTheOrganizer]

Thanks Jeff. Just keep in mind, the machine isn't doing the dirt removal, the snow foam you put in it does. And there are only a handful of snow foams that are actually meant for deeper cleaning, like Bilt Hamber Auto-Foam and CarPro Lift which I have demonstrated in this video: kzbin.info/www/bejne/bpuYlX2Lgp15mJY And regardless how good a pre-wash snow foam is, you always need to follow up with a contact wash for 100% clean surface. ;)

[@PapaSmurf918Detail]

Great video brother! That IK m e version looks heavy duty and boy does that foam come put luxurious! That Aoex auto wash is soooo good. Thanks for the good video buddy. Take care, and I hope all is well!

[@PanTheOrganizer]

Thanks brother! I hope you're doing well in your "better than freezing Montreal weather" hahaah. It's a snowy mess here.

[@PapaSmurf918Detail]

@Pan The Organizer We're hanging in! Believe or not it actually snowed here a few days ago! The mountains were covered! Not enough to hit the streets but man I've never seen it on the mountains so close!

[@SlooHands711]

As always, great video review !!! It did prove that “one gets what one pays for”; however, I felt that the comparison was a lil’ like Sweet Apples to Lemons !!!…

[@PanTheOrganizer]

Well said!

[@ankitparashar7]

Thanks for the detailed instructions on how to use this. Love your content. You should start another video series labelled Pan the user manual 😂😂

[@PanTheOrganizer]

Hahaha thanks Ankit!

[@MUR47_k]

Great video again pan Ive been waiting to start my business and this product would be perfect however ik needs a combi version aka sprayer/foamer all in one product

[@PanTheOrganizer]

Thanks!

[@Jimihx1142]

I have had this Ik machine for 2/3 years now. Pretty nice, but the wand nozzle filter needs more perfecting as it gunks up too easy and requires cleaning. Ik should offer bags of replacement nozzle filters because at the moment you have to buy the entire nozzle tip and the retail sellers are charging $15 for replacement tips. Improve the nozzle filter system!

[@coreymerritt7742]

Very cool pan I just got the ik foam 2 but it’s still snowing here in Vancouver lol thanks

[@PanTheOrganizer]

Yeah it's a mess here in Montreal, way more than in Vancouver, rest assured haha. We had -40C to -45C temps in early February, and had so much snowfall this past month, it's nuts. I'll likely put a short video on my Instagram and TikTok accounts soon.

[@coreymerritt7742]

@@PanTheOrganizer wow that’s crazy temps I’m glad you have a garage to work in I also got a mjjc foam cannon from Carzilla on sale haven’t been able to use it yet but I’m looking forward to it thanks pan

[@rickkern5785]

Letting that foam sit on the car without washing it off is driving me crazy er. Great Video.

[@PanTheOrganizer]

Snow foams are supposed to dwell on the surface for a certain amount of minutes. Follow the instructions on the label of the product you are using. Also, as I work indoors, I have a longer working period without having to worry about the snow foam drying on the surface. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 870,000 subscribers and we have over 110 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@rickkern5785]

@@PanTheOrganizer I understand dwell. I just love washing off the foam.

[@rubenherrera5550]

IK foam pro 12 is great with the compressor I use it to foam down my Yukon xl and it suits me well since i don’t have a pressure washer or foam cannon but it allows me to lay down a hefty amount of foam. Definitely one of my most useful purchases. The compressor is such a time and arm saver

[@PanTheOrganizer]

Arm saver for sure!

[@davidboyce6427]

I finally ordered the battery pump compressor. It was on sale for $131.00 at Super Detail.

[@PanTheOrganizer]

Good price!

[@davidboyce6427]

@@PanTheOrganizer Pan any experience with using TAC SYSTEM Shiney Wax? Or any of their line ups. As always 🫡🤜🏾

[@mtbkr81]

Yeah…just put that in the cart! Thanks again!!!!

[@PanTheOrganizer]

😁👍🏻

[@thesamsquatch5224]

IK coming along with the electronic version I like it. Plus you have the pump and Schrader valve which is great! Have you tried incredible suds with this? Pan another excellent video!

[@PanTheOrganizer]

I haven't tried Incredible Suds in it, but it will most likely foam like crazy too! :)

[@thesamsquatch5224]

@Pan The Organizer I've used it in a foam pro 2 and its insane. I can't imagine the 12 e, the ROAR coating is still going strong, and the 911 turbo s still as beautiful as day 1

[@rickkern5785]

I would love to see you use the IKE with 60 psi from your compressor and see how far you can go on a car. I would only put in one or two quarts and 60 psi to see if it would do the whole car. I always have a compressor hose handy.

[@PanTheOrganizer]

No point in using an air compressor when you have the battery operated one directly on the unit itself.

[@btbd2785]

​@@PanTheOrganizer Many have added portable battery Compressor and attached it to them for less than the $155 that IK IS charging.

[@PnyxisFR]

The Red SPTA looks exactly the same as the one which is sold by Shine in France :) .

[@PanTheOrganizer]

SPTA likely makes sprayers for a bunch of other brands.

[@noo648]

What a time to be alive

[@PanTheOrganizer]

:)

[@NikCuzzi]

Thank you pan greatly appreciate your videos. I like the IKE battery foam sprayer I have the hand held and love it but Wow Very expensive. I wonder if they’re going to make a battery powered handheld IK foam sprayer 😉

[@PanTheOrganizer]

Maybe they'll think of that!

[@joesoap7335]

At that price you'd be better off buying a pressure washer for multiple purposes house garden driveway just to mention a few but . great video as usual cheers Pan

[@PanTheOrganizer]

Thanks for watching Joe!

[@gege7785]

Ik valeur sûre.Merci Pan

[@PanTheOrganizer]

Oui très bonne qualité en effet!

[@bud9719]

Sweet!!!..but a little pricey for my needs…I’ll grab the ik foam pro ✌️Thanks for the info Pan😊

[@PanTheOrganizer]

No problem!

[@Uszat89]

I still struggle with my Axel 2000 from Marolex. Can't figure out the prewash to water proportions and what nozzle to choose. It always builds up at the end ot the nozzle and runs down.

[@scykotic]

The IK is nice but I can buy 3 of the Spta sprayers at around the same price. Which gives me more options as well.

[@PanTheOrganizer]

Hi Tim! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 890,000 subscribers and we have over 115 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. How did you discover my channel by the way?

[@scykotic]

@@PanTheOrganizer I found your channel last year when researching how to detail my own car. Which then led to me detailing as a side gig. Your channel has been very helpful, although it has lead to me buying more stuff than I probably needed lol.

[@PanTheOrganizer]

Hehe I understand you! I have stopped counting how much I spent on detailing supplies in the past decades! It's become an obsession. :) I just love detailing so much. And since you're detailing as a side-gig, if you ever are planning on starting your detailing business, I have a bunch of cool videos that can help you out. Check these below: ✅ Is detailing really worth it? : kzbin.info/www/bejne/j6KUc5KLgLOUr9E ✅ 20 year old detailer making $130,000 a year: kzbin.info/www/bejne/nWGbmJ6tm9tkjc0 ✅ Custom installation of equipment in a mobile detailing van: kzbin.info/www/bejne/f3W4qJmibaygnbc ✅ How to start a mobile car detailing business: kzbin.info/www/bejne/jYeWd32ZjMtqbas ✅ How to become a successful entrepreneur: kzbin.info/www/bejne/rYWml4mjmrKYe9E ✅ Mobile detailing truck setup: kzbin.info/www/bejne/qp-pm5uhgpmMgNE ✅ Things I wish I knew before I started detailing: kzbin.info/www/bejne/iYrUiIWnZ5yMnas ✅ How to be more efficient at detailing: kzbin.info/www/bejne/aWSmmZSDm52Xea8 ✅ Digital marketing to grow your detailing business: kzbin.info/www/bejne/Z3THZIFnnJugidk ✅ How to rank your detailing website on the 1st page of Google: kzbin.info/www/bejne/pn_JnZmums2jfsk

[@olenronning]

Could you test one or more of the power tool pressure washers? Especially the new Ryobi 40v 600psi brushless model or the Dewalt 500psi model? In particular whether they are compatible with foam cannons. Thanks!!

[@alancongratssoonyoullhead5273]

Ik is winner 👍🏼thanks pan

[@PanTheOrganizer]

Thanks Alan!

[@AcuraAddicted]

I do the same with my portable Xiaomi inflator.

[@DanielChaves1984]

What about using it with rinse-less washes. I think since I am apartment living the smaller spta will probably be the better option

[@PanTheOrganizer]

This is a foaming sprayer so not meant for rinseless washes. For those, use the regular sprayers like the IK Multi Pro 2. Link: amzn.to/3mjVhxb

[@EsenbekAliev_]

Can you please make a video about prewash chemicals? Especially for after winter wash, Thanks :)

[@PanTheOrganizer]

kzbin.info/www/bejne/pYXEd3iVpZeCd9k

[@nomad509]

Hey Pan, when I first got my Foam Pro12 a few years ago I did not have an air compressor so I had to pump it the old fashion way. I also fought with the dilution ratio and concluded I should use less soap (GSF) and had better luck but gave up using this tool. You are not wrong, experimenting is most definitely required! I was super excited with the IK announcement and am blown away with the foaming capabilities with the battery pack and plan on learning more about the perfect ratio when the weather warms up. I've also got my eye on that new PPF sprayer to aid my biweekly rinseless washing regimen that I plan on implementing!

[@PanTheOrganizer]

👍🏻

[@ThePeaceGawd]

If you have a Foam Pro 12 simply buy a portable car air compressor and double sided velcro tape... You do not need to buy this, unless of course you want to.

[@johncortes4558]

Q: does it fit in the frunk of the 911? I have a 981 (similar frunk size) and would take this to the car wash. Thanks for checking Pan!

[@andyp6683]

Hey Pan, great video! In the winter I don't have access to a garage so I need to use the self serve wash but don't want to use their soap. Would you recommend using this for my snow foam? Or just pretreat? Maybe I'll bring a bucket of hot soap water for contact wash but hope you could advise

[@Otiv1964]

Hi Pan, can you use Mr. Pink chemical guys soap in this unit? Thanks

[@MVG-gf1er]

Great video....would you mind doing a review of Shine Supply's Punch It? Thanks!

[@PanTheOrganizer]

I reviewed Shine Supply products here: kzbin.info/www/bejne/gZ-WfXtqh6uspbM

[@MVG-gf1er]

@@PanTheOrganizer thank you! Love your Great reviews on Shine Supply. Best Regards!

[@richardhines7042]

I’m looking at buying one for a pre foam cleaner prior to using in a self serve washing bay. This is for winter washing. What foam does everyone use as a pre cleaning agent to loosen dirt so that when I wash off with the pressure washer the car is clean? Do I need a higher PH?

[@barrybij8079]

looks cool but I had so many issues with the small ik foamer that I think I'll pass... if I spent 100 plus dollars and it performed as well as the small foamer ... just not worth the high blood pressure

[@PanTheOrganizer]

What issues did you have? I have both the original Foam 1.5 and new Foam Pro 2 and never had issues with either one. Did you reach out to IK or to the place you purchased it from?

[@barrybij8079]

@Pan The Organizer I purchased through Adams I think...I could never keep it operational. it would work for 1 tire. then just squirt.. tried cleaning it, and replacing the filter... thought I had it and it would work for 2 tires and crap out...I figured out it wasn't the filter it was the seals... bought a replacement pack... tried it worked for a car then the rubber seals wouldn't sit right and I would be right back to where i was..as an enthusiast washing my car is a relaxing experience to destress from the week... the ik foamer needed to be removed from the process to protect my sanity..lol

[@autorecon8744]

Hello again wats dilution for gsf in foam cannon?

[@PanTheOrganizer]

1:10

[@gnawty4662]

Hey Pan! Would you buy two of these, one foamer and one sprayer - not necessarily battery operated. I don’t have access to water/garage come winter. My thinking here is to use your recommended GSF in one (foam) for grime removal, and maybe a Rinseless in the other to remove the foam And wash the car?

[@PanTheOrganizer]

Yes that would work. Buy a foaming one for the Gsf (like IK Foam Pro 9 or Pro 12) and a small Morolex 2000 Ergo series pump sprayer for the rinseless wash. See my rinseless wash tutorial: kzbin.info/www/bejne/pmabiminh8lmhbc

[@gnawty4662]

@@PanTheOrganizer absolutely. You’re one of the best! Thank you Pan

[@Cornish_Maid]

Hi Pan, can you use the IK 12 to rinse the car with just water? Thanks for your awesome videos

[@PanTheOrganizer]

This is a foaming pump sprayer, so you need a foaming product in there. Not water. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@eptrip56]

hey pan do you a video that have full detailing ? exterior body glass headlight and in interior and engine thankyou for your all information and experience

[@PanTheOrganizer]

I have many of those yes. Here are a few: Tesla Model Y: kzbin.info/www/bejne/naDLnKZurbVohLs Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY BMW M6 Gran Coupe: kzbin.info/www/bejne/Zp2maqivgL2mbrM

[@johns4407]

Pan, for winter I want a pump foam sprayer for visiting a Pressure Washer Car Wash Bay establishment as washing the car on my parents driveway like in the spring to fall months will not be easy. I bring my own 1 or 2 bucket wash buckets and wash mitts or microfiber towels and soap. Just use the Car Wash bay pressure washer water only. So is this IK e-Foam Pro 12 the best for foaming as close as possible to Foam Cannon like my MJJC Pro V2? Is any of the Marolex ones even the Axel Foamer 7000 model exceeding this one?

[@SilveryFoxster]

Great review Pan. Could this pump be used for no-foam applications such as spraying citrus solutions. Thanks.

[@PanTheOrganizer]

This particular version is meant for foaming type products. I don't know if they have a regular battery powered sprayer.

[@SilveryFoxster]

@@PanTheOrganizer Thanks Pan

[@z-prodidsanziiprod6090]

I just moved to a condo with an underground car washing bay these days, however, those coin washing machines do not provide thick foam AT ALL. So people can just wash their cars without any safe pre-wash. Previously, I used a cordless pressure washer with a foam cannon to create thick snow foam. However, every time I need to carry 3 buckets of water to the washing bay it wastes a lot of effort and time. More importantly, the foaming process is not stable all the time. Sometimes I got a good foam but sometimes don't, that's also the reason why I buy IK e FOAM pro 12. I was amazed by this product (although it is quite expensive), I don't need to bring one more extra bucket anymore and I can create nice and thick foam easily. But these days I switch my pre-wash shampoo to Bilt Hamber touchless shampoo and suggest a PIR dilution ratio of 2~5%. Anyone knows how to calculate this on IK e Foam 12? (It is quite different to the usual PIR calculation process on other pressure washer...)👍

[@Mcklain5]

Great video. Wich mixer would you recommend (dry, intermediate or wet) when using lets says Adam's car wash shampoo? Thanks.

[@PanTheOrganizer]

I stick to intermediate for everything.

[@zeronorhero9800]

I wonder if DeWalt or Milwaukee batteries will fit.

[@P4SDetails]

I think IK has some of the better sprayers in the market.

[@PanTheOrganizer]

I would agree. IK and Marolex are top tier.

[@72mespo]

Any experience using the air compressor as the pressure charger for the unit instead of the battery compressor? Useful time, consistency of spray etc. I think I like that method as opposed to the battery charging. I used a pump sprayer now for wheel/tire cleaning to avoid all that hand fatigue with manual spray heads.

[@PanTheOrganizer]

Using an air compressor yields the same foam, it’s just that you have to refill with air more often as compared to having the IK compressor on the sprayer keeping perfect pressure automatically. It’s convenience.

[@bradmorin5427]

Great video. I bought I K foam pro 2 and other products that mention in your order videos to clean my car, the only thing I’m missing is a cleaner to spray before whipping the car with my Rag company drying towel so it’s not scratching the paint. Any product in mind?

[@PanTheOrganizer]

Watch my favourite drying aids video: kzbin.info/www/bejne/hIC3f5iaZZmrj6c

[@autorecon8744]

You ever use green star in a ik pump sprayer as a pre wash ?

[@PanTheOrganizer]

No

[@Akuroxradio]

IKE Foam Pro 12 already in the beginning we can see the density of the foam is way more better.

[@PanTheOrganizer]

Absolutely.

[@QCISugiyo]

We just got one at work. can't figure out how to change the tips.

[@PanTheOrganizer]

It's super easy. See how they show it in this video: kzbin.info/www/bejne/i2Gwcpx4druogq8

[@gabrielsong7638]

Usual great video Pan! I’m just considering between multi 12 pro plus and foam pro 12. My main chemical is DIY rinseless wash but i also like foaming. Could you recommend me between multi and foam?

[@PanTheOrganizer]

That's impossible. If you want to use a pump sprayer for a rinseless wash, you need to use a normal sprayer like the Multi. If you want to foam a product like a snow foam or wheel cleaner, you have to get a foaming pump sprayer like the Foam Pro 12. You need two separate tools for two different kinds of products.

[@gabrielsong7638]

@@PanTheOrganizer Sorry i think i caused some confusion here. What i meant is that i like to use DIY detail rinseless wash. I both like it in my marolex 2000 foamer and marolex 2000 pump sprayer. Just wanted to ask you what would you recommend me if i can choose only one for upgrade now

[@logicreason7672]

Hi Pan! I’m Paul. I enjoy your videos and the links you provide. I’m a bit new to detailing. I’d like to know how one determines a chemical is a surfactant (foaming properties). Something simplified would be great if that’s possible. Is there more than one way to determine if a chemical can be used as a foaming agent? Thank you and have a great day! :)

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. For this foam pump sprayer, basically you'd use a shampoo or snow foam, or a foaming wheel cleaner like Brake Buster dilute 1:5 or the Auto Fanatic Foaming Wheel Cleaner.

[@jserrano316]

Thank you for this! Pan what would you recommend to pair with this when you don't have access to running water for rinsing all the foam off of the car?

[@PanTheOrganizer]

Foaming wouldn't be your best case if you can't rinse it off with a garden hose or pressure washer. A rinseless wash would be a better option. See my tutorial: kzbin.info/www/bejne/pmabiminh8lmhbc

[@jserrano316]

@@PanTheOrganizer thank you!

[@kaafromoz]

For me Pan it's hands down the IK-E sprayer that wins, it not only sprayed better it handled the job with ease. Ty mate enjoyed seeing is excellent product in action and as always your brilliant description and details. Keep Safe Keep Strong 🦘🦘🦘🦘💖💖💖💖

[@PanTheOrganizer]

Thanks man!

[@TiimBow]

Just got one of these, I installed the orange hose to see if there more foam or if its more water and less foam . Has anyone tried the orange hose ? If so is the grey one still the best option?

[@owensamuels-h1r]

Pan, can the IK Pro 12 Foamer be used for Rinseless Wash

[@PanTheOrganizer]

It's a foaming type pump sprayer so it needs a product that has foaming agents. I wouldn't recommend this for just rinseless washes.

[@Archeagle]

super outil. Je vais m'en pogner un mais sans batterie. Si je peux me permettre une petite remarque positive pour l'editing de ta video. On aime bien te voir la face. Les plans avec visage coupé seraient à éviter selon mon avis. Utile dans des courtes shots mais durant une description je ne suis pas sur. Mais c'est seulement un petit partage rapidos. ;) bonne semaine

[@PanTheOrganizer]

Bon bon, on me donne des leçons sur comment produire mes vidéos maintenant? HAHAAH.. JE suis très au courant, mais je n'avais pas le choix ici, car je voulais qu'on voit bien la pompe, et si je me mettais en plan, la pompe serait trop petite sur l'écran. Je ne crois pas que ça va affecter la performance de la vidéo. Elle est déjà à plus de 10,000 vues en quelques heures. ;)

[@Archeagle]

@@PanTheOrganizer Je ne disais pas ça de manière négative bien entendu. Désolé si tu as cru cela ce n'était pas mon intention. Je trouvais que ça faisait différent de tes montages habituels si je me fis à tes cadrages de caméra habituels mais c'est toi le boss et j'apprécie énormément tous tes vidéos et tout ce que tu partages avec nous.

[@bernardjoveniaux566]

Bonjour Pan, merci pour la vidéo explicative et démonstrative de l’iIK e.foam pro 12 que tu viens de mettre en ligne, coïncidence je viens de recevoir le mien ce midi que je viens tout juste de terminer de monter mais pas encore testé. Perso j’ai changé au montage le tube d’aspiration de liquide installé d’origine afin de mettre celui réservé aux véhicules livré avec la boîte. Avec quelle couleur d’embout de ce tuyau fais-tu ta démonstration ? Cela m’évitera d’en changer en station de lavage. Perso je vais réserver mon Foamer electrique d’1,8L acquis dans cette même commande pour les jantes. Penses-tu que sa capacité (contenance) est suffisante pour traiter les 4 roues et passages de roues ? Merci de ta réponse, A bientôt pour une de tes futures vidéos même si parfois j’ai un peu de mal à transcrire l’anglais en français, tu sais que nous ne sommes pas doués pour les langues étrangères !!! BERNARD

[@bernardjoveniaux566]

Bonjour Pan, ta réponse ne s’affiche pas sur le site, certainement un problème d’informatique Bernard

[@eca7773]

It is a good comparison of what you can get as an expert for maybe mobile detailing. But for the average person, at almost 4x the price the comparison is a little bit like comparing an EcoBoost Mustang to a GT500. You'll get to 60 faster in the GT500, but is 3x the price worth it for the average person?

[@arthurpolin8194]

Can this be used as a plain sprayer without some thing that foams?eg, rinsless wash?

[@PanTheOrganizer]

This is meant for foaming chemicals. Use the regular IK Multi Pro 2 for use as a regular sprayer with liquids like rinseless washes.

[@arthurpolin8194]

Thanks but wouldn’t this unit spray longer, provide more pressure and without the need for having to manually pump? (Or is there some reason that makes it less than ideal for non foaming applications)