Panzer M4 Collapsing Stock Assembly - ( Adjustable Stock with Buffer Tube )

[@CaptDestro]

Thank you, I purchased a 5 position tube. Also works for the field/fixed stock models. The quality on these is honestly great and it does come preassembled with buffer, spring, etc.

[@Brandon-p6o]

With the 5 position tube what size wrench is used to take that hex nut off? It wont budge on mine and my 15/16 wrench is too small

[@Drax-qr2xb]

The amount of effort needed to take this tube off is freaking ridiculous

[@B.Brian0252]

The Panzer M4 works flawlessly and I'm satisfied with it. I was excited about upgrading the stock. Took it to the range and the stock would collapse with ease. After 100 rounds through the firearm I could not get the stock to collapse. After disassembling the firearm I had to force the stock to move and it had grinding. After finally getting it off I could see scrapes on my buffer tube. I cleaned the inside of the stock tube and even tried lubricating it. Still harder to move than it was and it is wobbling when it finally gets into position. I like the company and own the EG 200 and M4 with satisfaction. I wouldn't get this product until they work out the problems because I'm stuck with a faulty add on now.

[@panzerarmsusa]

We will be pleased if you may contact with [e-mail] thanks

[@B.Brian0252]

​@panzerarmsusa I sent an email.

[@jacobhill4632]

Iam in the same boat. The adjustable stock is a fixed stock and seems impossible to remove

[@panzerarmsusa]

@@nooneyouknow2420 can you pls send email to [e-mail]

[@willwestbrook8687]

My m4 will be here any day now. I also ordered the adjustable stock do I use the existing tube. Or will 1 come with the adjustable stock

[@akiraproject2424]

The jam nut is a 27mm. Use a flat open ended wrench unless you dont care about scratching it up

[@TheMosinCrate]

I enjoyed the video. Thank you for the instructions.

[@gregscheikofsky5606]

While you have it apart, it would be worthwhile to remove the screws from the rear site assy and the optics mount and clean and re-threadlock them with a QUALITY thread locking compound and reinstall them. I had all the factory screws come loose on these components while I was doing successive rounds during a break-in procedure. The receiver got hot and the factory threadlocking compound gave way. I will say the gun handles most any loads I've put through it. For the money, this is pretty good gun, however I have had some issues with the Panzer adjustable stock coming out of position during firing. I believe Panzer would warranty it, and I'll have to check into it. I have put approximately 500 rounds through it so far.

[@jasperg35]

@4:00 can you please break down this movie magic for me, and explain how you removed the stock after already putting it on previously?

[@noahbrown4254]

I’m curious as well

[@UnityRojo]

love the halo shotgun sound effects at the end lol

[@THECARSHOWFEED]

Wait you need to buy an extra tube ???? I just ordered the kit from psa.

[@austingoodson]

After installing the adjustable stock, how do you remove the adjustable stock? I cannot get the adjustable stock off the buffer tube.

[@danielritchey3146]

Did you find out how to remove the stock from the buffer tube? I’m having the same issue.

[@austingoodson]

@@danielritchey3146 yes I did…it’s aggravating but I finally got it off. If I remember correctly, extend the adjustable stock about half way down then find the notch that allows you to turn the stock counterclockwise (gun positioned the same way you would shoot the gun).

[@TheMike278]

Anyone else's adjustable stock only lock all the way in or all the way out ??? WTH..I have the 5 notch tube not the 3. I couldn't get that lock nut off with all the heat either. I made it home together but wonder if that my problem?? Anyone ??? Help.

[@Nerdy_Vet]

You saved my ass, I was getting frustrated @@austingoodson

[@willgriff9559]

About a third of the way to half the way down the tube there are 2 lines. The first line is the marker for the middle of the 3 stock length adjustments. The second line is for stock removal. Line the edge of the stock on that line. Rotate is counter clockwise and pull out. It was sticking for me till the finish wore off enough to allow it to come off easier.

[@jmprprimo]

stock got stuck on tube when aligning, now wont come off and cant get pistol grip on.

[@bolriconyc3795]

What size wrench did you use on that buffer tube lock nut?

[@Brandon-p6o]

With the 5 position tube what size wrench is used to take that hex nut off? It wont budge on mine and my 15/16 wrench is too small

[@maxcavazos4623]

How to change stock to the adjustable stock video for panzer arms eg240

[@xXwheezyownzXx]

Hello I have this stock on mine. Is there a remedy for the push button adjustment pin that keeps walking out? I’m constantly having to check it every 10-15 shells and having to hammer it back in with a punch.

[@whitestallion531]

At 0:34 I heard some kind of ratcheting sound like there’s a ball detent, mine did not come with one and the cap comes off very easily. Is this an issue?

[@jasongarcia8003]

Seems mine won’t come apart as easily as his from new never fired condition. After about 20 mins I gave up trying to take out the charging handle and just took out the trigger by popping the pin out. Also that nut seems to be put in by Thor. Even with a heat gun I needed a vise to hold the gun and put a wrench on it.

[@panzerarmsusa]

Can you pls send email to [e-mail]

[@bolriconyc3795]

I just bought the M4 SPEED...... does it come with a buffer tube with the 5 or 3 notches already or do I have to purchase the buffer tube with the adjustment notches?

[@panzerarmsusa]

@@bolriconyc3795 comes with buffer tube

[@bolriconyc3795]

@@panzerarmsusa thanks, so I just have to purchase the adjustable stock and small set??

[@panzerarmsusa]

@@bolriconyc3795 yes pls

[@bolriconyc3795]

@@panzerarmsusa sorry for my ignorance but I only need part#M4TASS?.... correct?

[@panzerarmsusa]

@@bolriconyc3795 www.classicfirearms.com/m4-tactical-adjustable-telescopic-stock-for-benelli-m4-style-shotguns/

[@MrKaneo95]

Made it look easy but it’s a challenge to get butt stock back off tube to put handle grip on. Is there a trick to remove butt stock from tube? I see it turn to the left then pulled hard and wiggled it.

[@noahbrown4254]

My collapsable stock won’t fit

[@brandonpayne5000]

Just purchased this the one thing left off that might help is the nut that holds the pistol grip on has to be put in the grip a certain way to lock in. Mine came with the new buffer tube as well

[@brandondavis4306]

what way does it have it go I bought one today and it came with the collapsible stock from buds for free and I can't get the pistol grip to go on so any tips would be a major help thank you.

[@brandonpayne5000]

​@Brandon Davis the new grip should of come with another nut. That goes into the back of the new pistol grip. Then just spin it on. I had to take it off a few time cause the nut has to go on a certain way but there's not indicator which is correct

[@brandondavis4306]

@@brandonpayne5000 ahh ok yeah I decided to just leave the skelton stock that came with it on it for now.

[@brandonpayne5000]

​@Brandon Davis there's no reason I noticed to take off the buffer tube. Mine came with the slotted tube already. Everything in this video was spot on. For some reason they didn't show putting the nut into the back of the new pistol grip.

[@Gadzooks57]

@@brandonpayne5000 He shows it at 4:08 but very brief and if there's a correct orientation it's not mentioned or shown. Also, he shows pulling the stock back off to put on the grip. I can't seem to find the right position with the button pushed to remove it once on. Is there a way?

[@sprkthead2]

When are you going to make the 5 position buffer tube available for purchase? I have an earlier production of the M4 that comes with the ordinary tube with no notches.

[@panzerarmsusa]

It will be soon...

[@shindukess]

@@panzerarmsusa We need magazine extensions too. The regular Benelli m4 2 round extensions don't fit.

[@Kingsmen_556]

@@panzerarmsusa what is the best ammo to run on this M4 shot gun? And what ammo to avoid?

[@shakenbake3636]

@@panzerarmsusa any update on when the buffer tube will be coming out?

[@bleedgreenbirds100]

It’s out now on classic firearms

[@killerjack111]

Do the new Panzer Arms M4 not come with a three position stock tube. I just got mine and it didn’t come with it, I even got the stock and grip to put on. So now I’m disappointed.

[@davidm4339]

I got mine a few weeks ago from Bud's gun shop and it came with the fixed stock. I was pretty disappointed. I thought they were shipping with the newer, collapsible ones.

[@ThomasRSmith-og7zo]

@@davidm4339 It's a Turkey shoot if you get the adjustable tube or not.

[@beesting5693]

Can somebody explain it taking the barrel off was truly necessary? Seems to me on you need to do is take the bcg and firing assembly out

[@matunutz1229]

this guy doesn’t really show the direction of the wat the tube supposed to be set 👎

[@laqutis1119]

It's a absolutely pain in the ass, in order to adjust you must turn the tube to the right and get it on the flat part, then back left to lock. So, once it's in a position that's locked and won't go up and down, tighten it until the end of the tube is flush with the inside. The tighten locknut and insure it's straight by wiggling it back and forth to find the exact middle point.

[@gregales3233]

Why can't we make are own notches???

[@pergaminopoo]

Does this tube also work with a benelli?

[@panzerarmsusa]

@@pergaminopoo yes

[@Justsomeguy1015]

Is this compatible with the Benelli 81041 stock? The pistol grip is a no go feature in my state so I have to get that stock.

[@brandonbowman4707]

What is the torque or measure t of force on the hex key bolt inside the rear stock

[@watertowerkennelsp7866]

I bought this stock but it has no buffer tube where do I buy one or did it supposed to come with one?😖😣😣it’s useless as is.

[@SchiZ03]

nope they’re both separate. i really recommend just staying with the fixed stock to be completely honest with you.

[@SchiZ03]

theres atlantic firearms they sell it as a bundle when you are looking at the shotgun. i could be wrong buddy but i do think its there.

[@SchiZ03]

ive seen reviews where the buffer tube spring shoots out the back of the stock.

[@grillinwithgreggreg7211]

I’m not here to criticize, but would you show how the first generation PM4 removal.

[@m3ndoza28]

How do i removed the walnut fixed stock for panzer m4

[@dante69d]

How far do you thread the tube in to the receiver?

[@RayJ4Liberty76]

Stick your finger inside and when you start to feel the tube. Stop

[@thornie123]

FYI to anyone with a Charles Daly 601 DPS you have to take the ol dremel tool to the pistol grip to be able to get the fire control group in and lined up with the pin. Other than that great stock for the price.

[@Copenasty]

My buffer tube won’t accept the nut.

[@Slasherx28]

Does this work with Benelli m4 LE? I have OEM butt stock but want to change to this.

[@Craiglanstrum1987]

I swear this dudes straight outta family guy

[@dsamples333]

Please note if you have the marine model, apparently its not the newest model. Straight tube. I thought it would definately have the position stock. ;(

[@rbryant14921065]

My marine from Buds had the straight tube also

[@gamefan7321]

My M4 came with 5 grove tubing but my stock wont fit am I doing something wrong are do i need a different stock

[@gguerra336]

I had the same issue. I tapped the nut on with a mallet and once it cleared the end of tube it went down with ease.

[@SOSdoorgunner69]

If the inner buffer tube has stop grooves in it already, why can't that tube be used? I am a bit confused. You have to purchase the stock and grip and buffer tube? Also where do you get this kit? thanks good video. should be easy job to do.

[@ThomasRSmith-og7zo]

The newer Models have the notches already and you don't need another buffer tube. Only with the earlier models you will need to swap it out. With the newer models you can just swap out the stock.

[@THECARSHOWFEED]

@@ThomasRSmith-og7zohow do you know if you have a new mode! 😊

[@Kingsmen_556]

Is changing the stock according with compliance?

[@SOSdoorgunner69]

I have to revise a comment YES the stock kit (Two Part, without buffer 5 position buffer tube soea indeed come with a locking button) hope I did not offend Mr Mustache. Now for the install. just showed up at my door. thanks for an affordable alternative to the overpriced ones the other guys sell. now on to finding a magazine extention that does not need to be filed ro fit.

[@SOSdoorgunner69]

Shot mine finally today. very tight groups at 10 15 and 20 yards? so I put ic which is the one with single notch and almost same tight pattern. 2 3/4" 00 buck. so now I need to fine a cylinder bore Breecher/brake tube. anyone know where?

[@00-Dima]

Will the eg240 get a collapsible stock

[@Out_Work_Everyone]

All that to change the goddamn stock?

[@beastiklez1090]

Love this dude!

[@XD-03]

How do I put the nut in the pistol grip

[@isaiahapodaca03]

I am having this problem as well. Did you ever solve how to put the nut in the pistol grip? Mine doesn’t have enough threading sticking out to tighten it on.

[@Tonynewkirk]

What is the single shell side saddle and where can I buy one? 😩

[@PhysicalHen0]

MatchSaverz shot shell holder

[@danielcisco]

Wish I could find one!

[@SOSdoorgunner69]

Why does my barrel assembly not go back together as easy as yours Mr. Mustache? there's a pad part of lower receiver that the chamber can't get by. have to kind of pry carefully and with luck it gets by, then have to push down muzzle first on carpet and get it to seat all the way into receiver. once it's together it's an awesome shooter, Winchester Sabot slugs shoot like a rifle. Federal Tactical HI power 00 buck stay inside 8" at 25 yards. no FTF no FTE. just always scared to pull barrel assembly off to clean, as it's always a pain to get that assembly slid on as easy as yours. Amd when will you answer the question about where can we get the mag ext. and bolt handles etc etc. I mean I see a guy on here using a small file to relieve the theads on a Bennelli M4 2 shot extention. let's go get all that stuff available on your store site..please?

[@panzerarmsusa]

We will be pleased if you may send email to [e-mail] or call [phone]

[@Mk14Mod0_]

Will it be available in Turkiye? After all, it produced in Turkiye. 🙄

[@Andy152R]

Panzer, you need to fix the issue with the locking pin. It comes out often.

[@uguraydogan83]

Hi, thank you very much for your commend .I would like to solve the problem which locking pin do you mean?

[@Andy152R]

@@uguraydogan83 I was referring to the locking pin on your collapsible stock next to the release button. Mine is constantly coming loose, making the stock wobble. I guess that part didn't type in my comment. Otherwise, I love my Panzer Arms M4! I have almost 1000 rounds through it with no malfunctions.

[@panzerarmsusa]

@@Andy152R can you pls send us a photo to [e-mail]

[@Andy152R]

@@panzerarmsusa I sure can.

[@Andre-te4gq]

Will this fit the new Panzer EG240 shotgun as well?

[@panzerarmsusa]

No

[@Andre-te4gq]

@@panzerarmsusa Thank you. Will there be one made for the EG240?

[@panzerarmsusa]

@@Andre-te4gq unfortunately no

[@Andre-te4gq]

@@panzerarmsusa man that would awesome if you guys decide to make one in the future. Thank you for your response. I've got an EG240 on the way!

[@panzerarmsusa]

@@Andre-te4gq thank you. Hope to see your shooting videos soon

[@dperk001]

need to get the 5-position tube the skeleton stock is way too long.

[@shakenbake3636]

I went to your site and dont see this tube, how do you get one?

[@panzerarmsusa]

Pls check the links below our video

[@shakenbake3636]

@@panzerarmsusa yes I click on all of them, they are just for the shotgun. I have purchased the M4 and the Collapsing stock from Atlantic firearms. But you need the buffer tube , where do you just get the tube?

[@UraniumWolfy]

@@shakenbake3636 if youre talking about the one he's mounting the collapsable stock on, that comes with your Panzer M4. the tube that he installed on the M4 in order to put the ajustable stock actually comes with the M4 and is inside of the fixed stock. the reason he had to put it back on there is because the stock that he had on there before is actually an aftermarket tube, but the tube he puts on there is stock.

[@shakenbake3636]

@@UraniumWolfy , I purchased mine from Atlantic firearms along with the panzer collapsing stock. I took the gun apart right now and it's a buffer tube with no grooves. The collapsing stock is not able to mount on the buffer tube. Where do you get that buffer tube he has in the video?

[@timinoakton]

@@shakenbake3636 Ditto - just spent an hour getting everything apart, clean and realized that the stock needs a more authentic buffer tube. Come on Panzer, sell the modern tube for a reasonable price!!

[@ichicken5052]

HOW DO I TIGHTEN MY REAR SIGHT... ITS WIGGLY AND I THE SCREWS ARE ROUND

[@c.h.u.d]

Loc tite

[@DurinsFolk86]

Disassemble. Look into the receiver. Two flat head screws hold the rear sight to the receiver. Tighten.

[@SOSdoorgunner69]

Ok so...I purchased your stock kit and plan to use it with only the three position buffer tube. But I noticed that your butt stock has a button, to release or lock the stock in position Can I expect that you are selling the same one? I purchased mine from Optics planet and it says it's a Panzer product. Something seems fishy here. I don't see anything that appears to be a button release on the pictures on the ordered one. I am a bit skeptical that the unit you used for video may not be the same one you are selling as a kit. The buffer tube has nothing to do with that as I don't need 5 positions. 3 is plenty for storage or transport. cam anyone who has purchased one chime in? I know it's priced right but something seems odd. I guess I'll know when it arrives as they have been really slow as of the last few months. Also, Do you have your own Panzer store on line so we can get these after market items? seems like there are virtually no one making affordable after market items. mag ext. bolt charging handles. etc. thanks for any info you or someone on line can give.

[@PapiSoza]

not satisfied with this platform as of now bought a panzer m4 took it home cleaned it up and lubed it down took it to the range and put 3 birdshot shells down the barrel and by the 3rd round the stock retaining screw completely stripped out shooting the stock retaining ring out the end with the buffer and spring and the entire stock and grip with it.... NOT A HAPPY CUSTOMER IF THIS IS NOT RESOLVED!!

[@panzerarmsusa]

@@PapiSoza can you pls send email to [e-mail]

[@codypokorny5837]

Fix the collapsible stock they're breaking.

[@totalglitch]

Will this work with a benelli M5 with no issues if it has the 3 position gas tube????

[@nooneyouknow2420]

Did you mean an M4?

[@novak.olen66]

This didnt help AT ALL

[@Drax-qr2xb]

Facts. Camera angles could be better really do need to see mr mustache

[@novak.olen66]

Setup to fail. Good job.

[@craiger8484]

Is this possible on the EG240??

[@panzerarmsusa]

No

[@jawaii4071]

This video is useless you can barely see what he's doing