Paper micro motor + 2 valving types / Бумажный микро мотор + 2 типа клапанов

4 pneumatic motor models made completely from paper, with two new valve schemes. Dimensions of smallest model is about 1x1x1cm (piston diameter ~1.7mm, crankshaft diameter ~0.4mm). Assembly process described here: only-paper.ru/forum/38-26076-...
Templates: drive.google.com/open?id=1HHn...
4 модели пневматических моторов сделанных полностью из бумаги, с двумя новыми схемами клапанов. Размеры меньшей модели ("микро-мотора") - около 1x1x1см (диаметр поршня ~1.7мм, диаметр коленвала ~0.4мм). Процесс сборки описан здесь: only-paper.ru/forum/38-26076-...
Развертки: drive.google.com/open?id=1HHn...

[@calebsherman886]

I don't know how you do it, that's incredible craftsmanship.

[@MK-ge2mh]

You, sir, are an exceedingly intelligent and talented man. I truly hope your genius is somehow making you a lot of money.

[@rayanahmad6901]

He sadly isnt

[@_ponkachonka]

Lovely to see you keep making these! Nice engine, cool sound! Overall great work.

[@m8die319]

This is incredible. Hats off to you, I'm still amazed by the simplicity and effectiveness of that little thing... Let's keep this video at 0 dislikes as it is!

[@dianaquezadatorres4541]

Hi! I just saw a video about you in DW. I fall in love with your work, it's amazing!! You are really a pro with paper. Greetings from Ecuador in South America!!

[@civicsr2cool]

This is beautiful!

[@antonkan4665]

Двигатель объёмом 1 куб см! В прямом смысле...

[@user-jk5ov7un9q]

Это так мучаться надо

[@YANAGITAtokinori]

Wow so speedy ! Your projects always cheap and amazing. I love them.

[@pshekus]

О! Давно не было :)

[@alannewman85]

Phenominal!

[@KIRITO_222]

Ну и золотые руки у тебя, раз смог такой маленький двигатель собрать

[@antastic1318]

You are a genious! 🙀 Your work is really impressive! :)

[@garethgc1141]

Such beauty in design

[@Leonel.q]

I love the sound that Made it

[@MrGravicaper]

Ну Левша.... Ну даёт.... Браво!

[@chakibchemso]

that was crazy! im building inline 6 paper engine based on your designs but with external/internal controlled electrical valves like koenigsegg's freevalve tech and im actually looking for a source of comparessed gaz that can be generated from chemical reactions maybe something like baking soda and acetic acide and making some sort of mixer that is connected with a belt to the engine to speed up the reaction! but i doubt that will generate enough co2 to move the engine at high speeds that might be solved by having many smaller reaction chambers so they finally sum up! im getting crazy with this lmao

[@MEGASTRIX]

It sounds freakin good haha.

[@bascra3882]

Спасибо👍👍👍

[@LegoTechnicEmbodiment]

Круть!

[@Grandchiter45]

I like you stuff

[@egehantufekci2208]

Amazing.

[@user-qb5hOb8qz7g]

はぇーやっぱすげえなぁ……

[@animepabu5526]

Love to build one of ur things and show my automotive teacher

[@rajabhowmick_22]

Oh just luv it sir

[@yulioktavia3693]

Mind blowing... That is si simple i think i can make it

[@shivbarajebhosale6737]

Thats so cool,long time no video?

[@zsupermicrowave_6553]

It would be cool to se a "Paper Quasiturbine engine" in action

[@musikame2930]

まじすごすぎですよ \^o^/

[@TommyLikeTom]

genius

[@henryforster8101]

This is awesome! Could you please show templates for the second valve type too?

[@andrezur9748]

я буду делать .

[@gillesfrancois5277]

Только я хотел под предыдущим видео про транзистор написать, что скоро, возможно, вы сможете добыть свет из воздуха и бумаги - и тут это...😄

[@pivoglotik]

Вот такие люди подковвывают блох и запускают космические корабли.

[@user-kb2kn6nf6b]

И запускают космических блох

[@ahadkhimani2653]

In the second motor at 1:31, how does the air from the balloon enter the low pressure area (the piston chamber)?

[@ahadkhimani2653]

Never mind I figured it out! I think its because the air enters through the open flap when you start rotating the piston to get the motor going.

[@user-gy1uf1iv7w]

Здравствуйте! Объясните пожалуйста куда девается воздух если на схеме было показано что там всегда давление.какой то парадокс. Или между поршнем исилиндром есть расстояние?

[@nothingssmore]

все верно, между поршнем и цилиндром есть зазоры

[@my_negative_world]

Wonderful! I really want to build one but I'm afraid the micro one is just too hard for me. Could you possibly post a template for the bigger one?

[@nothingssmore]

see description - there are templates for bigger one. Also I have templates for several other models on my channel, also in descriptions of videos

[@chakibchemso]

just multiply all the values by x to have x scaled size of the engine

[@dr_beat3259]

будут ли развертки второго типа двигателя?

[@nothingssmore]

пока не планируются

[@storminmormin14]

Dry ice powered paper airplane.

[@saibalmukherjee6990]

from where does the exhaust (waste air) go out? And which one of your engines is the fastest except the radial one?

[@nothingssmore]

Waste air exhausted from the gaps between piston and cylinder, as they are not perfectly sealed. As for the fastest models, I think small one cylinder model goes after the radial

[@saibalmukherjee6990]

@@nothingssmore Thanks, but from where do they go out of the engine body?

[@nightfoxx4117]

Of all your engines...

[@zen-airstrike]

Бесполезно, но круто!

[@alvitodeanova2602]

Can you make a video tutorial how to make that paper engine?

[@onlinehelper374]

Make full making tutorial please

[@christopherking5607]

How did you make it because I was going to try to use one for a school project

[@user-os1ln1ct9d]

Алексей, скажите, пожалуйста, как предусмотрен выход избыточного давления над поршнем при его движении вверх? Или этим можно пренебречь только за счёт энергии маховика? Спасибо за ваше творчество.

[@nothingssmore]

там из-за зазора между поршнем и цилиндром после закрытия клапана давление под и над поршнем практически выравнивается, и при движении поршня вверх сопротивления особо нет

[@The_BrickYT]

I have a question: I am making my own but the valve seems a bit oppened when the piston isn't touching it. Should the valve be completely closed in closed position?

[@nothingssmore]

I guess it is ok, if the valve can be closed overall. During working, it will be closed by air pressure

[@The_BrickYT]

@@nothingssmore thank you

[@nightfoxx4117]

Please make a tutorial on this...

[@Patokoff]

Ещё интересует вопрос, детали в нахлест нельзя клеить? Я правильно понимаю?

[@nothingssmore]

в этих моделях да, не предполагался такой способ

[@ppsh7137]

Have you tried making this with typical A4 paper? If so, did the contraption work? The paper you used in the video is clearly thicker than your typical copy print paper so I was wondering if I had to go buy thicker paper if I wanted to make this.

[@Cookieofdoom]

Isn't it just carton?

[@nothingssmore]

A4 is just a dimension of the sheet of paper. As for the thickness/density, I'd recomment paper of 160-200 g/m2. You probably can use "typical" paper for printer (80 g/m2), but I'm not sure it will be enough stiffness. But actually the smallest model (micro-motor) is made of paper 80 g/m2

[@ppsh7137]

@@Cookieofdoom I'm not going to buy and rip apart a bunch of milk cartons 😅😂

[@ppsh7137]

@@nothingssmore thnx

[@suryapaul2812]

Please send single cylinder engine pdf

[@user-pg3we3oh9m]

Между поршнем и трубкой надо оставлять зазоры?

[@nothingssmore]

Какой трубкой? Если имеется в виду трубка подачи воздуха - то нет, если цилиндр - то да

[@Barbe200]

можете скинуть чертежи мотора? (can you throw off the drawings of the engine?)

[@nothingssmore]

всё что есть - в описании видео

[@Barbe200]

@@nothingssmore спасибо, я думал вы не русский

[@Pandino_super]

Please, make the assembly video of the firist paper engine, PLEASE i want do one of them

[@clo_vertv8135]

I love your idea so much, but I'm from South Korea, and I can't translate it by myself. I can't find your awesome templates. So seriously, can you upload your template drive google by next time?

[@nothingssmore]

see video description

[@khalidakhter3093]

please give me the list of all tool that you use for making this paper motor

[@nothingssmore]

modelling knife and modelling mat, metal ruler, transparent plastic ruler (for making axis, you can see how to use it in my video about paper axis), needle or paperclip (for glue applying and forming round surfaces), tweezers, small scissors

[@Leongardful]

Time to make computer with a simple logic

[@nothingssmore]

actually I have something like this - kzbin.info/www/bejne/r6ekf5aIadKEba8

[@khalidakhter3093]

Please give some important tips and notes for making this model working

[@nothingssmore]

from my experience the most important thing is that the friction should be very low

[@agtriu.the.animator]

Здравствуйте! Есть одно предложение, куда можно Вам написать?

[@nothingssmore]

Добрый день, оставьте свой email

[@agtriu.the.animator]

@@nothingssmore [e-mail]

[@khalidakhter3093]

I really would to make it

[@pedrosalmeron6576]

Hello,I need help, I've been doing your v8 engine and it's already the third time I try and I still have friction problems between the cylinder and the piston,what can I do?

[@nothingssmore]

I think you can try to make cylinders a bit more in diameter, or pistons - a bit less in diameter. It is more preferable to have slightly bigger clearance between piston and cylinder than significant friction

[@pedrosalmeron6576]

@@nothingssmoreOkay thank you .P.D:I love your projects, the precision you achieve in each project is amazing, I continued like this. Greetings from Uruguay🇺🇾

[@mucahit_tekin29]

the type of paper you use and how many grams

[@Jeffo12818]

160-200g/m2

[@jayanthbs3202]

Is the valve fixed to the bottom or left free with respect to the first engine

[@nothingssmore]

it is fixed partly, so that it can open by pushing by crankshaft

[@Soik-wc9rp]

can i ask how did u attach the exhaust valve on the first engine (i mean the part on bottom) that it can move freely?

[@nothingssmore]

I use very thin paper (printer paper with density of 80g/m2, or even better - paper for receipts), and connect it to the bottom surface only in one small point, at least glue should not be spread on the fold line; otherwise it won't bend freely

[@FanCooler-r8n]

Good

[@user-ip5wp2sl9i]

А можно ли поставить турбину,которая работает на маховике

[@nothingssmore]

у пневматического двигателя (которым является эта модель) другой принцип работы по сравнению с ДВС, поэтому турбина здесь работать не будет, только если в качестве имитации

[@Jeffo12818]

Can you show us how to make it

[@nothingssmore]

all that I have regarding assembly of these models is a link to forum with some photos of the build process (see description)

[@Jeffo12818]

@@nothingssmore can you make a video on how to make the engine

[@gurvanshsinghramdiwali4646]

Hi sir which one of these engine is best according to you and which runs more time on one balloon and which revs higher

[@nothingssmore]

I'd say the one with reverse power stroke direction is more efficient, but I didn't perform any measurements

[@khalidakhter3093]

How you make cylinder and piston clearly round

[@nothingssmore]

you can use some kind of rod of suitable diameter and wrap paper parts around it

[@khalidakhter3093]

Can i use fevicol for making this model

[@nothingssmore]

if you mean glue manufacturer, then I don't know - I never used such glue

[@khalidakhter3093]

I maked your first engine

[@khalidakhter3093]

Where I found this template

[@Uzair_05]

Какую бумагу вы используете

[@nothingssmore]

Разную, от ватмана (~180г/м2) до офисной (80г/м2) и чековых лент

[@Uzair_05]

@@nothingssmore спасибо

[@zachatttack3107]

Could you possibly share a template of the smallest engine? Also, how did you possibly make the axle for the motor? If it’s paper, what steps did you take to roll it, and is it a specific type of paper? If not, what did you make it out of? Thanks.

[@nothingssmore]

There are no templates other than those mentioned in description of the video. As for the axis - yes, it is made of paper, very thin one, which is used for paper cheques in shops. There is a tutorial for making axis for V8 engine, you can watch it, maybe it will help kzbin.info/www/bejne/i3rOZaSFg9xjqNE

[@zachatttack3107]

Hello. Thanks for the information. I’m a bit confused as to what you mean by “paper cheques”… Are you talking about receipts? (the thin pieces of paper that the cashier prints out after the transaction)

[@user-kg6qy4nx1c]

yes@@zachatttack3107

[@JustFun-iz9rf]

do ypu have a video on how you made that

[@khalidakhter3093]

Which type of glue you use

[@nothingssmore]

super-glue (cyanoacrylate)

[@theultimatehoomanperson6701]

At this point just power your car directly from the air stream's thrust

[@xundaww1659]

pls can you make a template of the second motor?

[@0-MACMAC-0]

hey man im trying to build the second value design and honestly just use the same template and modify the crank case to the other valve

[@SuperTechno2012]

Do you still sell the v8? if so for how much?

[@nothingssmore]

Could you provide your email for contact?

[@SuperTechno2012]

@@nothingssmore [e-mail]

[@nishamestry3389]

Wat about radial engines

[@nothingssmore]

I have no any ) Maybe sometime in future

[@litelexa1590]

Я не понял как ты его включил при помощи воздуха?

[@nothingssmore]

это модель пневматического двигателя, работает по такому же принципу как и прототип. Вот анимация www.animatedengines.com/co2.html

[@khalidakhter3093]

Can i use 100 gsm paper

[@nothingssmore]

if you mean 100 g/m2 density paper, then I don't know, because I made templates based on thickness of paper with approximately 180 g/m2 density

[@ForenZ.]

Здравствуйте, я сделал мотор с обратным клапаном, почему то не работает. Можно с вами как то связаться? Уже третий день сижу не как не получается. Если есть возможность дайте сот.сеть

[@nothingssmore]

думаю можно через почту, напишите свой email

[@exneed2645]

make a turbo for engine plsss

[@nothingssmore]

All my piston motor models are pneumatic. And as far as I know, it is impossible to use turbocharger with pneumatic motors

[@rodneydelapena3752]

how do you drill holes on paper?

[@nothingssmore]

sometimes with a tiny drill (0.5-1mm), but mostly - with a spiky modelling knife

[@ainashtilebaldieva8966]

Если поставить турбину из бумаги он не пойдёт в разнос ???

[@nothingssmore]

турбину для пневматического двигателя можно поставить только рядом, так что всё будет ок )

[@Patokoff]

Сколько в высоту у вас получился клапан, именно в высоту, потому что на чертеже там деталь от клапана в высоту неправильно нарисована, она цепляет верхнюю часть двигателя, и клапан попросту не открывается и не закрывается

[@nothingssmore]

Точно сказать не могу, но вполне возможно в развертках ошибка, я рисовал развертки уже после того как была готова модель. Думаю эту вертикальную стенку клапана можно подрезать, чтобы она не задевала корпус. Возможно когда-то доберусь протестировать развертки, тогда обновлю

[@janisstraume8812]

Можно развёртки получить?

[@nothingssmore]

см. описание видео

[@khalidakhter3093]

I maked it , but it's not working why ??? Can you explain. There is not friction problem it's smooth but when I giving air it's not working

[@nothingssmore]

It is hard to tell why without seeing the model, there might be a lot of reasons, maybe valve is not tight enough, or it closes too early/too late, or flywheel is too light/too heavy or something else

[@khalidakhter3093]

Thanks for replying

[@EthanAdey]

Where can I get the instructions in English??

[@nothingssmore]

see description of the video - all existing templates/instructions for the moment are placed there

[@KIRITO_222]

Колокольчик не подвёл

[@papercrafter8670]

how do you make it spin so smooth?

[@nothingssmore]

during the assembly process, friction should be controlled for each moving part - if any of them is moving tight, it is better to rebuild it from scratch; also, I'm using graphite powder to decrease friction of the whole mechanism in total

[@hpm66]

How to create a piston In the first engine

[@nothingssmore]

Almost all pistons in my small models should be done in two steps - firstly, you need to form side surface on some rod of corresponding diameter, and make a well-shaped ring, and secondly, insert a top surface in that ring, fixed it with several drops of glue

[@hpm66]

@@nothingssmore thanks

[@gurvanshsinghramdiwali4646]

Which one is most efficient and best

[@nothingssmore]

I didn't measure efficiency, but I think that the second scheme (with the backward power stroke direction) is more efficient

[@gurvanshsinghramdiwali4646]

I like all of your creation I want to make an engine that is high efficient and can run for more time on one air balloon can you suggest something and I also want to know how the exhaust system works in second valve design I will try my best to make a really cool and I am really inspired by you - your viewer and a life long follower

[@gurvanshsinghramdiwali4646]

Hi I started to design the engine on the paper already and saw the process on website but I am confused about how to make the valve I am making the reverse power stroke model currently and I will figure out how to attach the valve rod on the con rod but I am confused with the valve design and the process is it similar to the first scheme of not please help me and do me a favour.😊

[@dimon_jdm8286]

можете пожалуйста сделать обучение?

[@jayanthbs1032]

Hi sir, can you please make a video on placing the engine valve and demonstrate it's working

[@nothingssmore]

I have no plans to film any tutorials right now, but maybe sometime in future

[@serg34111]

Как ты это сделал?

[@nothingssmore]

все что есть по процессу и шаблонам - в описании видео

[@khalidakhter3093]

How you throttle make

[@nothingssmore]

I used a flap which rotates on a rod passing through an air supply pipe

[@joysexena5338]

Bro can you give discribtion to each and every part in cm to understand better in 1 shock engin

[@nothingssmore]

you can print templates on A4 - the sizes of parts should be actual

[@exneed2645]

Bite bite biteeee Pls make a turbo for paper engine dude biteee

[@NAP625]

is this kind of engine more efficient than normal turbine?

[@nothingssmore]

obviously it can be answered only after performing corresponding measurements, and I didn't do anything like this

[@ayekhin4804]

I need Template for the air nozzle to put balloon inside the engine

[@nothingssmore]

I guess you can take it from these templates, it is part 13 drive.google.com/file/d/0B0xqQIZvwhdicTJILWlTOXRLZ3c/view?resourcekey=0-RYouy_4yUtU5bFB5zuSXag