Easy Paracord Bracelet Kit

[@Sadfrogboi]

I want to thank you I struggle pretty hard with depression end this video to help me make something for myself by myself and the sensation of pride i felt when I finished and it looked good felt awesome I know its a small victory but it feels good to make something and actually be proud of it thank you

[@RainerStoffBln]

🤣🤣🤣

[@kingbolo4579]

You've received an unkind response to your comment. Ignore that idiot. People who haven't experienced depression don't know how it can take you. Small pleasures and small victories are part of what make life worth living. Good on you!

[@SashasRevenge]

That’s right, the world is full of all kinds of people, and some of them have more problems than can be fixed just by learning how to do something new. Good for you. The next thing to learn is how to ignore people who have no compassion. Ignore them, stay away from them, and never reply to them. Have a great Christmas and be happy ❤️👍🏼

[@brenda4924]

🎉🎉🎉 thank you so much🎉🎉🎉 I have searched and searched for a video I could learn from with all my learning disabilities. 🎉🎉🎉🎉 I just made my first ever bracelet.

[@JFrostbite2012]

Thank you Paracord Planet! I followed along with the tutorial and I have found success with it! I hacked your technique and instead of fishing long length of paracord to form knots, I bundled the untied paracord with a small rubber band to avoid tangles. I think that would be helpful for other first timers as well. You could even suggest different color rubber bands to assist with the left and right side concept? Good Day Sir!

[@Countryboy071]

I've just started making things. As an outdoorsman I've plenty of cordage and tie many knots. This however, is different! I use Goldberg seven strand 550 for a lot of uses. Not the cheapest but excellent quality. I've made one of these for practical as well as style. I've incorporated a BCB compass, ceramic blade and a nylon cuff key in the clasp. Great and informative video, easy to understand also.

[@ParacordPlanet]

We're happy to help. Thanks for watching and leaving positive feedback!

[@geistschatten]

You explained it very nicely and without sounding lecture-y, thank you! Completed my first two bracelets in under an hour immediately after watching. Best video I've seen for absolute beginner.

[@TeasingEditz]

This video is very helpful because I believe that this braid is one of the most popular braids out there and it looks very stylish.

[@tomato010010]

Struggled many times when I tried to make a paracord bracelet and was reading instructions from a book. Then I watched this video, I could finally make this bracelet. Thank you!

[@ParacordPlanet]

Glad we could help!

[@eli4999]

After hitting my head on my desk and rethinking life itself I finally made a paracord bracelet. Thanks for the video.

[@SamSigifkekjjdkgkqkqkdlv]

thank you paracord man trying to do this on my own nearly broke me

[@BrianStone-cj3pp]

I don't know why, but this video seems easier for me to understand than a lot of the others I've watched. Now I'm excited.

[@ParacordPlanet]

That's awesome. Glad we could help! 😊

[@BrianStone-cj3pp]

Man, me too!​@@ParacordPlanet

[@harvestkitty]

My son unraveled his favorite bracelet and this was the best help in re-tying it for him. Thank you so much!

[@ParacordPlanet]

Glad we could help!

[@elizabethrodriquez4310]

Wow !!! Thank you. Just beginning to play with this type of cord. 🦋

[@boriszuniga8140]

Thank you. I just made my first paracord bracelet ever. I made it for my son. Is a little big, but he likes it. Great tutorial video.

[@ParacordPlanet]

Thanks for watching! 👍

[@superb_model_cars]

THANK YOU VERY MUCH !!!!! THIS IS MY FIRST AND MOST FAVOURITE BRACLET I EVER MADE AND TEACHED BY YOU!!! MAY GOD BLESS YOU!!!!!!!!😆

[@ParacordPlanet]

Glad to hear it! Keep up the good work!

[@_Hgameing]

Thanks for this video. I just started. I’m really getting into it. I made like three of these bracelets in the past two days and I’ve just started like last week. Thank you.👍👍👍❤️❤️

[@ParacordPlanet]

That's awesome! Keep up the good work!

[@reinhardwagner8559]

Great job explaining those knots. Thanks a lot, worked well for me!

[@rcjoe406]

Thanks went through 12 videos untill yours simple and to the point now i can make and sell them at my flea market booth BOOM 😀 show me the money 😅😅😊

[@PygmyPrincessx]

Adding on an extra inch. Wish I could do that 😢

[@candacepeterson2174]

So helpful! If kids do this help the kid or kids with the lighter and scissors/knife.

[@brady_cll]

Started learning for a work thing… now here I am with a whole new hobby for my adhd. 😂🎉❤

[@katieallen6176]

What do you do to not get the twist on my court bracelet😻

[@Countryboy071]

As ive mentioned Goldberg do some real quality 550. Maybe it's the cord ? I've had it happen a few times now with certain cordage. If you soak in cold water and allow to dry helps. Are you using 100% Nylon or polyester/blend?

[@RubyLeveledUpppp]

Love this channel bro! Super dope content for a niche community

[@ParacordPlanet]

Hey Thanks!

[@mariekevandervegt416]

Thanks for the easy to follow tutorial! It was really helpful and I just made my first bracelet!

[@ParacordPlanet]

That's awesome! Thanks for the feedback.

[@johndeaton2862]

Simplest video yet.Thanks alot

[@jjdifsjdfinsd]

Can you make breslets and then sell them again? Also is it available to buy in uk??

[@ParacordPlanet]

Hi! Thanks for your comment. We do ship internationally, and here's what we currently have available for premade bracelets: www.paracordplanet.com/paracord-accessories/bracelets/.

[@pattyrdh1987]

Can pony beads be added to this bracelet? Thanks

[@Aaronplayz509]

it was a long process but it worked out. and it was super fun

[@leifestabrook6864]

thx so much, I had absolutely no idea on how to do this, highly recommend this if you are like me.

[@ParacordPlanet]

Glad it helped!

[@esperanzajimenez7008]

Where can I buy this paracord kit

[@patrickhanlon932]

Nice video. It was useful for a quick reminder on how to make this particular bracelet.

[@Apocalyspto]

I want to ask, what is the function of this paracod bracelet? Is it just a decoration?

[@ParacordPlanet]

You can always wear a Paracord bracelet as part of an outfit, but it is also a convenient way to carry cord so you have it when you need it. Here are just a few of its practical, outdoor uses: www.paracordplanet.com/blog/6-uses-for-paracord-in-the-wilderness/.

[@Andru-uz3zt]

My new fav channel Ty so much for helping me I need a birthday gift for my friend

[@greysteak]

I did my first but it like...pigtailed?

[@Alex-ib6tm]

Do you have a video like this for your 1” clip?

[@ricardodelrosario8467]

Very nice video very clear tutorial thanks.

[@JulianaKucko]

Great video, however, when finished I had the buckles wrong and need to wear it inside out. I followed the tutorial and used a jig. Hmmm..

[@MrJimneale]

Im.going to try this with bailing twine to see how.it.looks

[@ParacordPlanet]

That sounds like fun! Let us know how it works out if possible.

[@wild_gypsy_rose]

Every video I watch doesn't show how to get the final buckle on

[@ParacordPlanet]

Hi! Here's what you'll do for a regular cobra bracelet...first, fold the cord in half. Then pass the fold DOWN through the opening on the buckle. Then pull the running ends through that fold and tighten to make a cow hitch knot. Then pass your running ends down through the other opening on the buckle and start your weave. Hope that helps!

[@kevinhiggenbottom8339]

The way I do it is I measure the wrist like you said and all that but I have a jig maker and then I take one end of my string and tie just a little knot but not real real tight just enough for it's not tight so when I get done I can untie it and then finish it off I do the right side first and then when that little knot is on the left side and I think that same string and cross over onto the right side then left side and right side that's how I do mine and I leave just enough to where I can wax it together at the end I didn't mean to make it black but you know how it is but it doesn't bother me none and yes I have to put two fingers underneath make sure I got the measurement right and then I have to adjust my jig maker she's just about right so it's not 8 and a tiny half and yes I do get tight and clean as possible where I got two skins that are blister right now but that's okay that's part of my work

[@encalle2869]

Yo my ADHD roof but y put it out come out great i even make two , this and the fisher. Thanks great video very educative keep it like this man. 🤟🏿😎🇵🇷

[@jvhandsome5888]

just make two of these , thank you very much

[@ParacordPlanet]

Nice! We're happy to help! 👏

[@CROW_Striker]

Used this to make a lanyard for my great grandfathers paratrooper compass

[@ParacordPlanet]

That's awesome!

[@Lukacost1_Dogman2468]

Best tutorial 😊

[@ParacordPlanet]

Wow, thanks!

[@EFA4AK]

I prefer to strip the inner cord out first. Creates a lower profile when adding a dog tag to it.

[@esperanzajimenez7008]

Very nice. I love it. Thank you.

[@sonyamaxwell9823]

Where do u get the clips what size?

[@greysteak]

I see what I did wrong. I didn't do the second knot the second knot as he said to. I didn't alternate the knots.

[@DarylBelsondra-sg4to]

what name of product,that can make the bracelate

[@ParacordPlanet]

Hi! We used this 550 Paracord: www.paracordplanet.com/paracord/550-nylon-paracord/.

[@jodydyer8445]

Wow 🤩 ❤ awesome

[@ParacordPlanet]

Thank you! 🙏🙏🙏

[@ralphallenpunzalan8492]

Is that 3 in buckle?

[@lockdownenriq]

max palmucci says thank you

[@Stingray.]

W

[@sobrolho]

thank you! great tutorial!

[@elizacuskelly4006]

Where can I order this paracord kit beginner's plz ..liz

[@ParacordPlanet]

Here you go! www.paracordplanet.com/cobra-bracelet-kit/ ✌

[@pandoraslockeddown420]

Can I order my first kit for beginners plz.liz

[@ParacordPlanet]

Here's a link to that beginner's kit! www.paracordplanet.com/cobra-bracelet-kit/ 🪐

[@BethSanchez-rc8cn]

This video is tight tight tight!!

[@jodydyer8445]

🫶🏻✌🏻🧠🙈🙉🦄🐎🦮🪽🦜🦥🐾

[@eli4999]

just like my bracelet.

[@KoalaGaming09]

Amazing video only one thing its a bit quick and i keep having to go back to the place i need

[@ParacordPlanet]

Thank you for the feedback! We'll keep that in mind for future videos.

[@jodydyer8445]

I can’t do it yet, but I will some day

[@ParacordPlanet]

We'll be rooting for you!

[@jaymarshall8681]

amazing! thx.👍👍👍

[@carvingthecottonwood]

Excellent tutorial, very satisfying evening project... thanks!

[@graciebullock4732]

so good

[@oneflyguy1949]

Thanks bud!

[@JohnJohnJohnJohnJohnJohnJohnJo]

Like if Michael sent you

[@SquashedMosquito]

😂😂😂😂😂😂😂😂

[@ember357danman5]

The very first loop is called a larks head knot ....

[@ParacordPlanet]

Thanks for the comment! It is known by both names, so either way is ok. 👍

[@CristianPozzessere]

This is a classic macramè knot

[@ParacordPlanet]

Don't you just love when a skill is transferrable?! 👏

[@juliorg1]

You helped me a lot,,,' ,,,,,,,,,,,,,,

[@yashsvirajansrivastava]

Nice 👍

[@GrahamWilson-zr9fd]

bru i cant make it

[@kristinbrown5746]

Awesome video....just make sure when burning nylon, you wear a mask and do it in a ventilated room....apparently its a carcinogen and can cause harm to the lungs, I'm told. But my kids and i live your videos!

[@ParacordPlanet]

Hi, and thanks for the great feedback. Your safety is very important! You can also hold your Paracord near the bottom of the flame, not in it, for about three to six seconds. The idea is to melt, not burn. 👍

[@macnitro902]

I put in a tampon as well never be too safe

[@jodydyer8445]

Hi my name is Sophia in when I am watching your videos you always say hey guys and I am in a 8 year old girl. is there a way that you can say Hey to everybody instead of just guys. I know that it’s a thing that people say but my mom says that without us, knowing it makes girls feel like, they’re not as important so we try not to just say that but I really like your videos. Thanks.

[@aleetee2003]

​@@jodydyer8445 I knew this day would come. I just didn't know when.

[@cordeliameyer6734]

Thanks for the tip but I’m pretty much immune to anything (jk I do it outside lol) but I’ve burned it inside without doing that before

[@MimiMaya-l3m]

❤🎉😊 رائع ماشاء الله

[@Isabella-dg5np]

What the duck it is so hard

[@n0t_.r0se]

LUDZIE OGARNIJCIE POTRZEBUJE NORMALNEGO TOTURIALU CZEMU TO JEST 3+ SKORO MAM 46 I NIE UMIEM TEGO ZROBIC

[@brittanybrown2496]

❤

[@nancybemol6365]

I CAN'T

[@motivador8023]

🎉

[@RHYTHMAKER_DREAMSCAPES]

well good thing i have some paracord and a butt hole, i can get started then!!!!!!

[@golden-rl1cf]

ngl kinda bad tutorial i have been doing paracord for pretty much 2 years and this is not very efficient

[@gavin-6334]

i don’t care what size ur wrist it

[@flyingpotato1975]

Sorry dude but you are talking way too quickly for my son to follow.:

[@TheMotocross64]

Slow the speed down, at the top of screen you will see the last button that looks like a gear, tap on that and slow video to 75% or slower! I do this a lot cuz I’m hard of hearing! Hope this helps you.

[@rodneymadore9390]

Reeeeeee

[@ItzDrRetriveAdoodle]

fake didnt work on the first knot!!!!!!

[@eli4999]

you did it wrong then because everyone else including me now have a braclet.