Parametric Wall Design _ Grasshopper

[@waruiotoko378]

thank you for this tutorial. hope you can make more with voice over and step by step tutorial.

[@Josetrillo600]

El archivo que esta colgado en el link funciona muy bien, solo hay que ser cuidadosos en escoger el plano donde construimos la superficie inicial que debe ser el XZ, luego observar que en el icono de creación de rango o dominio colocar con click derecho una expressión de x-1 para igualar el numero de datos y al momento de crear la superficie en el ucount incluir una expresión de x+1. Lógicamente que esto no es una receta de arroz con leche, tienen que analizar las entradas y las salidas para entender lo que esta ocurriendo en el proceso.

[@marcobarberio6910]

Hi, how can I design these shapes on a cylindric/vase?

[@malekmaster9426]

At 1:11 the point were on the top a second later they were on the side how did you do that?

[@bosrun_lrm]

Sorry for some mistake in the video. Check the link below the video to get the files.

[@behrouzghasemi4457]

EXELLLLLLLLLLLLLLENT THANKS FOR LEARNING GRASSHOPPER

[@bosrun_lrm]

😊😊😊

[@user-es2dx3ml2i]

Hi i seem to have an issue at 1:05 the points doesnt seem to appear at all and i cant make the wavy effect. would appreciate if you know what happened and how to resolve it . thanks alot :)

[@bosrun_lrm]

Sorry for some mistake in the video. Check the link below the video to get the files.

[@aaronjuettner]

Hey, Tank you very much for your Tutorial! What happens at 1:11 ? I cant follow the step before the Graph Mapper affects the Points

[@bosrun_lrm]

Nothing is happened, it should be my editing skill is not so good. Don't worry, no step is missing just follow my steps.

[@cL12388]

Hi, I encountered a runtime error "The UCount value is not valid for this amount of points." during creating surface from point, how can I solve it?

[@timdonzon4660]

same error...

[@bosrun_lrm]

Watch the tutorial carefully and follow my step, and make sure that you are not miss any step. If it still has a problem, you need to make clear one thing as below. Surface from Points component is used to create surfaces from the 3D grid of points. “U”, on the Surface from Points component, specifies the number of points in the {u} direction whereas on the Divide Surface component, the “U” specifies the number of segments in the {u} direction. One segment equals to two points, two segments equal to 3 points, and {n} segments equal to {n+1} points. So, when you use the “U” value on Divide Surface component to connect to the “U” value on the Surface from Points you need to plus one (U+1) to match the UCount value. Hope it will help you. Thank you!

[@youssefelshenteinawy992]

will you answer i have question how did you get to the first place

[@bosrun_lrm]

May I know more clearly about your question ?

[@RenzoIR144]

what happens at minute 1:11? my points don't look like in the video

[@bosrun_lrm]

Sorry for some mistake in the video. Check the link below the video to get the files.

[@RenzoIR144]

the tutorial is useless or incomplete, it happens that all the points go to one end and when creating the surface the computer freezes because of the number of points that went to one end.

[@marcobarberio6910]

I followed everything step by step but it doesn't work (I've Rhino 6 for Mac)

[@bosrun_lrm]

Sorry for some error in the video. Check the link below the video to get the files.

[@jamikbuxoriy]

the author of the tutorial is deliberately misleading and just wants to watch on the channel, in fact, he does not intends to teach someone although it may seem very simple. Just one question how did you trade your conscience for views

[@EstherOlukosi]

Hi I had a problem at 0:29 when I add the move it pushes it upwards

[@ebruyildiran1447]

Could you please share your grasshopper file?

[@bosrun_lrm]

Yeah, of course. Check the link below the video to get the files.

[@EstherOlukosi]

even your files don't work is there something i'm missing

[@marceloalessandro1359]

0la friend you provide these files in dxf for use cnc router 2030 . I will use 15mm mdf. what value of dxf file package for- reception desk panels wall shelves -