Team Associated MT-10 Rival Fully Upgraded in 2024

[@ParkflyersRC]

Make a note that this 3800 kv motor will be just fine on 3s as long as you dont over gear it. Good starting point would be a 9,10 or 12t pinion ( 32p itch). The Copperhead ESC will run much much cooler than a sidewinder 4 overall. This ESC is simplyt state of the art !!! THIS setup is aggresive and a motor fan will help in hotter weather.

[@chrisvda7277]

Fastrax do loads of Aluminium upgrades. I have hobbywing max10 combo on mine. 120a Esc 3660 3200kv with 15T pinion. Have motor fan and it flys on 3s with no overheating issues.

[@83Goldy]

Hi from NJ. I’m about to buy the Arrma Granite 3s because they are in special for $269. Are they any good? Would be my first Arrma rc car. I really appreciate your help. Thanks

[@ParkflyersRC]

@@83Goldy it’s a nice car. It has slipper clutch issues. Keep that in mind.

[@83Goldy]

@@ParkflyersRC Oh ok. Is there is an upgrade to fix that issue? Or do you recommend me a better car? Thanks

[@chrisvda7277]

@83Goldy Id choose MT10 over Granite. Granite 50mph stock. Vorteks 55mph with a better transmitter. MT10 V2 44mph stock but has better handerling, centre diff, sway bars and more adjustability and lights. Also a dust cover for electronics lol Wish Arrma would add centre diff to 3S range and more adjustability.

[@JahBlessd]

I'm loving this vehicle the more I see videos of it.. and this kit makes me wanna pull the trigger!

[@ParkflyersRC]

Ty for feedback.

[@ParkflyersRC]

BUY LINKS !! Team Associated MT-10 Rival Fully Upgraded in 2024 COPPERHEAD 3800 MOTOR ESC COMBO BUY LINK: www.parkflyers.com/products/copperhead-10-waterproof-1-10-s?ToPasteBoard& REAR UPGRADED ALUMINUM SHOCK SET (ITEM#25846) www.parkflyers.com/products/mt10-alum-rear-shock-set?_pos=1&_sid=c9131efc9&_ss=r FRONT UPGRADED ALUMINUM SHOCK SET (ITEM#25845) www.parkflyers.com/products/mt10-ft-shock-kit-front-alumi?_pos=1&_sid=eb01e7cea&_ss=r PRO-LINE MASHERS UPGRADED TIRES www.parkflyers.com/products/masher-2-8-mtd-raid-black-6x30?ToPasteBoard& RPM FRONT A-ARM SET www.parkflyers.com/products/rpm-associated-rival-mt10-front-a-arm-set?_pos=1&_psq=RPM+MT&_ss=e&_v=1.0 RPM REAR A-ARM SET www.parkflyers.com/products/rival-mt10-r-arms-1?_pos=2&_psq=RPM+MT&_ss=e&_v=1.0 IC5 CONNECTOR SET www.parkflyers.com/products/connector-ic5-device-3?_pos=5&_psq=IC5+CONN&_ss=e&_v=1.0

[@JahBlessd]

​@ParkflyersRC please note I sent an email earlier too.. from BC, Canada.

[@boiledtea479]

you should buy this. its 100% worth it. i love mine

[@DigitalConfusion1]

As an MT10 owner, excellent video. The one thing I would highly recommend is body protection on the front, top and rear area. In minutes, it starts to tear into the expensive shell body. I do not know of any aftermarket skid plates but I 3D printed some and installed immediately after the first run. May not look quite as good, but highly functional. Does anyone agree?

[@roobzruckers7626]

RPM makes some "skid rails" that are pretty good.

[@airtec87]

the included led lights is a nice touch, especially since they are really bright.

[@nickhathaway4617]

For a high-end customer you should have shorten the motor wires and same connectors but besides that awesome built😊

[@ParkflyersRC]

Ty for input. Good observation.

[@sambo6591]

Wat shot weight is the oil

[@allthingsradd]

This is one of the most entertaining and informative videos I've seen on the MT-10. Thank you for doing such a descriptive awesome video, I just ordered an MT-10 today! I am now subscribed and can't wait to watch more of your videos keep up the good work!!

[@owen8538]

Hi what shock upgrade you recommend for rb10 on rear do you think mt10 rear ones be good

[@sdy284]

links to these upgrades in your description would be great

[@ParkflyersRC]

BUY LINKS !! Team Associated MT-10 Rival Fully Upgraded in 2024 COPPERHEAD 3800 MOTOR ESC COMBO BUY LINK: www.parkflyers.com/products/copperhead-10-waterproof-1-10-s?ToPasteBoard& REAR UPGRADED ALUMINUM SHOCK SET (ITEM#25846) www.parkflyers.com/products/mt10-alum-rear-shock-set?_pos=1&_sid=c9131efc9&_ss=r FRONT UPGRADED ALUMINUM SHOCK SET (ITEM#25845) www.parkflyers.com/products/mt10-ft-shock-kit-front-alumi?_pos=1&_sid=eb01e7cea&_ss=r PRO-LINE MASHERS UPGRADED TIRES www.parkflyers.com/products/masher-2-8-mtd-raid-black-6x30?ToPasteBoard& RPM FRONT A-ARM SET www.parkflyers.com/products/rpm-associated-rival-mt10-front-a-arm-set?_pos=1&_psq=RPM+MT&_ss=e&_v=1.0 RPM REAR A-ARM SET www.parkflyers.com/products/rival-mt10-r-arms-1?_pos=2&_psq=RPM+MT&_ss=e&_v=1.0 IC5 CONNECTOR SET www.parkflyers.com/products/connector-ic5-device-3?_pos=5&_psq=IC5+CONN&_ss=e&_v=1.0

[@shuster1921]

Another thing that really will make driving these better is to balance your wheels/tires!! I've do it on every car/truck I race, and it is no different on bashers!

[@Danielxperez14]

Is ec5 better output than deans or xt60 or are all plugs the same as far as output

[@retrorider80sbmx23]

Custom RC Upgrades' do a 7075 Motor mount plate which is an awesome upgrade.

[@GamezOfWar]

Great build, other than that wire routing and probably the worst transmitter on the planet it’s a good build.

[@remlif315]

what diff oil weights would you run with this set up?

[@michaeldorich4485]

I am late to the party on this video. I enjoyed your explanation of the everything you did and the reasons. The additional advice is excellent. Your probably aware of this. But, I thought I would mention it. When I wanted to replace my servo horn with a metal one I sent an email to Team Associated. I received a response from Donald Natale. His choice was the metal servo horn from the DR10m, 72058. It's perfectly shaped and bent exactly right. I have a question. I am attempting to run my MT10 V.1 in local parking lot series. I wanted to try some different springs. Associated doesn't offer any. One KZbinr recommended the springs from the old SC10 4WD or Losi Ten SCTE springs. What are your thoughts? Thank you for a great video.

[@natstleger8683]

Is there a link or parts number for traxxas servo arm plz?

[@user-ou9jx9hu8f]

Nice build!

[@ch-vs3fw]

Great video with great information. I saw links to most of the other upgrades, but the servo horn is missing? Any chance you could add that one too?

[@ParkflyersRC]

@@ch-vs3fw Yes. I will add that asap. Ty for the tip. Makes sense to add it.

[@MrGoldmember2]

@@ParkflyersRCI’m looking for the horn as well. I looked through the kinks and don’t see it yet. If you get a moment please post it or share the part number to find on your site

[@TheBabyskywalker]

This is the most helpful video on KZbin. Period Thank you

[@ParkflyersRC]

Enjoy

[@ali3ns14a]

It turned out to be a nice MT10. I built a Pro4 SC with a Hobbywing max and the 4000kv motor. I think the engine is relatively loose. Is there a trick how to fix the motor mount? This is just hacked in at the bottom. Is there something between the screw and the motor mount? Thanks

[@911FlightRisk]

Crcu motor mount

[@t3floz]

Awesome man! When you say that the car handles better than arrma and traxxas in the air. I guess thats with the upgraded esc and motor and not stock? Do you think this handles better than a granite? Do you have any alternative ti the esc and motor? Cant get it here :/

[@RiskyZeva]

just got a new MT10 and ive been struggling with bent driveshafts and axles.. Even after installing the upgraded metal shafts and axles. Have you had this issue? i am jumping this thing about 4-6ft onto grass completely stock.. i am stumped

[@jasonstonestreet4636]

Anyone know how to make the lights work with a aftermarket (spektrum) receiver?

[@cristianionut7615]

Just ordered my blue aluminum steering wheel. I don't know if I understood correctly; should I use it? Thank you!

[@rgard6]

Awesome video

[@Jussomerando677]

Thank you for this video. I’m new to the hobby. I picked up a brushed MT 10 prior to finding out who my LHS was. I want to tinker with it myself but you gave me a good basis to strive for and I’ve been ordering from you since. Are the shocks the team associated shocks? And I’ve been seeing ppl in my FB group put that level of internals in their MT 10s but swapping the chassis to the Pro SC 10. What are your thoughts on that?

[@ParkflyersRC]

Yes. Shocks are team associated

[@TheflyingkiwiRC]

IMO the upgraded shocks look great but are no better than the stock plastic ones. I've broken both plastic and metal ones. Not worth the price of the upgrade.

[@JapanRCAdventuresS]

Fastrax, M2C and Custom RC Upgrades make critical upgrades such as T7075 or Carbon Fiber motor mounts to name a few. I am building an MT10 and used your motor and ESC combination but with a 5mm shaft as the smaller shaft is not adequate with the increase in KV.

[@neubstick]

Looks awesome. Can you toss in some links to the upgrades you added?

[@ParkflyersRC]

www.parkflyers.com/products/team-associated-mt-10-rival-ultimate-combo?_pos=1&_sid=89b8a9e2a&_ss=r

[@neubstick]

@@ParkflyersRCthank you!

[@losi5ivet29cc]

Would the Copperhead 10 MT edition with the 2400kv 1415 motor be a good fit for the MT10V2? Thanks I'm no stranger to Castle products I just haven't used any of their 1/10th scale products and there's many options to choose from and I would like to get an MT10V2.

[@logiqalone8249]

Nice job on the build and your videos are great. The only link I couldn’t find is the one for the aluminum Traxxas servo horn. Can you please provide that.

[@ParkflyersRC]

www.parkflyers.com/products/servo-horn-9544?_pos=6&_sid=278d75716&_ss=r

[@logiqalone8249]

@@ParkflyersRCthanks so much!

[@cds1223]

Nice rig. I love this platform. Been loving it since it was the Helion. It’s getting warm as of today in Ga. ! Whats your opinion on the strongest fans for 36mm motors? As in durability and fan speed? Ive gone thru a few each summer and want some opinions. Thanx for any opinions.

[@nyjon8949]

How was the torque and speed with this set up I have the white edition copperhead 10 on back order was going to get the 3200kv motor but now I may switch

[@ParkflyersRC]

If you want torque get the 3200. But keep in mind it’s a low friction drivetrain and the chasis does NOT need more torque. With 3800 you will have just the right amount of power. Keep the pinion btw 10-12. Get a motor fan and enjoy.

[@kennithfuller1533]

How does that motor perform compared to the 1412 3200kv?

[@ParkflyersRC]

My opinion 1412 has too much power for the drivetrain. Wrong choice for this car IMHO.

[@kennithfuller1533]

I figured so. I have the 1412 3200kv in my arrma vorteks. I've decided to get a mt10 roller because i happen to have the copperhead esc and 1410 3800kv motor sitting on the shelf

[@andrewmuhlke1280]

Do you have the version 1 for sale ?

[@bradshumate783]

What’s cost of this setup done up just like this ?

[@ParkflyersRC]

Around 900 to 1000

[@Trabevion]

Which servo arm are you using?

[@DonaldBurns-we3wy]

I love my MT-10 and I was going to leave it alone, aside from the rpm A arms, when the stock break. After watching this video, I don't know if I should thank you are be mad at you for making me spend more money and doing more work. I guess I'll go with option A in this case. Great video and thanks for giving me something to look forward to once my build is complete. Subscribed and liked. Damn nice build.

[@DonaldBurns-we3wy]

Forgot to add, learned some things I didn't know as well, thanks alot.

[@johnsorensen5758]

I bought 3 of theses when they were sold by helion $150 each the only weekness is the axles they break at the wheel the team associated pro 4 sct has the same axles they break too helion sold those too besides that they are awesome vehicle's you are right best value for 1/10 rtr

[@cds1223]

Yup. I got the 10mt from hobbytown $199! Still love it although its all TA parts now. The Helion plastic was better. They made a steel spur too. Tbone used to make a bumper. We need a rpm skid plate. And ur right about the axles. Best fix ive found is lighter tires. U can work some traxxas hd shafts to work. Heard u can use 4s arrmas with mods but yup heavy tires like this pop them quick. All prolines are too heavy for it.

[@911FlightRisk]

Traxxas hoss front extreme heavy duty drive shafts.

[@RCRoads]

Great job covering the MT-10. I agree with setting up gear mesh and the "roll test". I really don't know that much about mesh but with larger teeth / pitch some manufactures actually say to use 2 sheets of note paper to set mesh. I guess the more you do it the better you get.

[@i_am_cris1]

No link for the servo arm, can you post the link? Thanks

[@theNeathBoy]

With all these upgrades, what type of controller would you recommend?

[@sambo6591]

What program card do I need to program the ESC

[@rcchronicles25]

This is an amazing video! It should have 50,000 views! Fantastic 👌🏴󠁧󠁢󠁥󠁮󠁧󠁿🔥🇺🇸

[@ParkflyersRC]

Thank you !!

[@shadowdemon5730]

How long will that double sided tape last?

[@Last-Lap-Lando4]

I use double sided Cooper foam tape used in computers

[@michaelwortel]

Awesome build! Have you run into problems with the wheel nuts coming loose? It even does it with some aftermarket ones with the nylon insert.

[@NaturalBorN44]

I don’t see the link for the servo arm the aluminum one that’s a great upgrade please and thank you. Comment with the link. I’m also a lifetime subscriber. Appreciate the video.

[@ParkflyersRC]

@@NaturalBorN44 Ty for sub !! Here ya go www.parkflyers.com/products/servo-horn-9544?_pos=1&_sid=f82fcb072&_ss=r

[@sirdukeofhazard]

Hi Awesome build. Where do I get a steal spur gear from?

[@richardspicer8253]

Have you done any upgrading on a maverick quantum rx flux 4s?

[@dagreat8089]

How much do you charge to make one just like this one ?

[@ParkflyersRC]

Yes. Here is the link if you need to make any changes, you can always call me at 732-539-8002. www.parkflyers.com/products/team-associated-mt-10-rival-ultimate-combo?_pos=20&_sid=f8c6f09cb&_ss=r

[@dagreat8089]

Thanks for info!!

[@83Goldy]

I don’t see the 3s battery combo in your website.

[@JohnSmith-ef8nr]

The stock radio is junk, thats the first thing to go, also you should upgrade the motor mount plate as thay can bend. I just brought a new V1 mt10, im going to upgrade it before I use it.

[@Barberev]

What does a build like that cost? Thanks👍

[@ParkflyersRC]

About 850.

[@JimAnderson-dt5qd]

Do you sell the traxxas servo arm?

[@ParkflyersRC]

Yes. Item 9544 on my website. Parkflyers.com

[@gyrypegasus3474]

I buyed one of this , stock , but my question is if this car can reverse? I find very dificult to reverse , only one time accidentali I reverse , please help

[@theNeathBoy]

Yes. Out of the box, the vehicle has reverse.

[@masonhanft7158]

Play around with the dials on your transmitter that says throttle.

[@babupranav]

Any reason you didn't go with the 1412 3200kv combo?

[@ParkflyersRC]

Yes. Motor weight and ability to use a 2 cell with power. Gearing will take care of the combo used. Don’t question the master.

[@edtegtman3461]

Link to the servo arm?

[@911FlightRisk]

Mt 8 is a direct fit

[@troymartin4107]

Did you still use the plastic gears

[@ParkflyersRC]

Yes, with Plastic here the motor is gonna last a lot longer. There is no need for metal.

[@bernardrc1137]

Hmmm, helion avenger, original chassis, but MT10, is Awesome, I have put ezrun hobbywing max 10 60a esc, in mine, what a difference ,I can also program it aswell, were as the original esc you can't 👍

[@cds1223]

Ive got/had the Avenge also! Love it but cant buy helion parts anymore unfortunately. Plastics were better but thanks to TA it lives! w/o TA itd stayed busted in a box and its exactly the same rig other than wheelie bar. great design. Long as they make them ill have one. Got a Pro4 chassis on 1 and one standard chassis both upgraded.

[@Fly2kill1]

Originally designed by Losi for TLR.

[@cds1223]

@@Fly2kill1 yup! theres a vid on YT with Gill Losi Jr promoting the release of the Avenge. 10MT and 10SC. and Helion had all the upgrades that TA has now. & a metal spur. & Traxxas went and put Helion outta bizz!! 😫got one for 199.99 when it was discontinued. The XLR. loved the bodies Helion had. Still got a pristine shelf queen body lol.

[@Fly2kill1]

@@cds1223 have you seen the LWB conversions? People put the pro 4 chassis on the mt10.

[@cds1223]

@@Fly2kill1 yeah i have one myself. Soon as TA released the PRO4 i got a chassis and driveshaft. Metalrc and captiancouldve on YT have one. Doesn’t stunt flip as good as MT but Handles great and flies really stable. Only prob with these rigs is the axle stubs bend and break easily especially if u try running a heavier tire. My fav truck. If u have an MT i strongly suggest u try the LWB conversion. Cheap mod. Its a blast.

[@TheGuyFromWI]

This is the best MT-10 upgrade video, thank you for sharing the suspensions settings! Any suggestions on the servo saver? Do you glue the stock servo saver?

[@Diballan]

Nice video

[@ParkflyersRC]

Thanks

[@911FlightRisk]

Love the build! Love mine. But throw a crcu motor mount in there and modify the top mount screw. Lock that hoe down. Toss that tension spring in the trash. You did not fix the one if not the biggest problem. Tx/RX is junk also.

[@xb10hazardx]

Wish AE made this in Nitro version.

[@ParkflyersRC]

Me too.

[@hellofromsoutheastalaskarc7517]

I was number 16 to like this video 💯💪👍🤷😎🕶️ and 2nd to comment 💯 cool looking truck though

[@ParkflyersRC]

Thanks 👍

[@katomartin6747]

With those huge tires off course it handles in the air come on wheel base is too short for me i dont like cars that pull wheelies half throttle

[@modzilla74]

Of u wanna claim its fully upgraded , then theres a few things missed. 1 , the plastic spur gear. When i bought my mt10 there was no upgrade.( That may have changed) I was able to get a tekno hardened steel spur gear and get it to fit. . Never had a problem after that with the spur. Also..... The axles,.. i didn't find any worthy upgrades meant for the mt10. ...but , with some research i was able to get the heavy duty MIP axles from a 4x4 slash to work. I think those mods would make the upgraded truck more of a complete build ! Ty

[@ParkflyersRC]

Plastic gear is better since you need a failure point in drivetrain. Motor bearings will last longer as well. facts..... MIP are made of a heavy heavy steal and increase rotating mass by more than double and also corrode over time and they evenetually bind. No GOOD

[@modzilla74]

Then why do all decent eighth scales come with all metal drivetrains? What's their point of failure. Plain and simple the plastics gears suck and I got sick of buying them

[@ParkflyersRC]

Listen to the Hobby guy that does this all day.

[@Fly2kill1]

Factory team has axles.

[@jianhuali1635]

Which is the tekno spur that you can fit?

[@BASSstarlet]

I dont like the chassis layout. Looks like a cheaply made chinese 1/12 car.

[@TheflyingkiwiRC]

Looks can be deceiving. In fact you couldn't be further from the truth.

[@monocogenit1]

"we did it to the max"....lol Maxx....nah

[@steviefpv]

Fully upgraded but standard cheap metal motor mount that bends after 1 heavy hit lol you need the crcu cnc one I have it and my motor hasn’t moved a micro out of mesh

[@lymedog3176]

Kevin Talbot… beat the living shit out of this car…” Stock” and couldn’t break it… it doesn’t really need up grades…. Other than the max from traxxas I haven’t seen a car as durable…. That max too is “ stock”…. I beat mine constantly it only broke one time… it was used by a friend and he hit a telephone pole at full throttle… it broke off a wheel and a a- arm… that’s it… but the MT 10 is even tougher….ive seen this car in action… I also seen an e revo 2.0 in action… air control… e revo is better… but this and the original max are neck and neck

[@datimir7301]

Can't agree. I bought MT10 one year ago because they said it's durable out of the box. Unfortunately mine is not, almost everything I have replaced by better parts...

[@lymedog3176]

@ you either ran it over with a car ,are the most abusing RC driver ever or just are a horrible rc driver…dude the thing went through the abuse of the most radical rc drivers and survived swimmingly!