PARKSIDE PLSD-60-C3 Soldering Station UPGRADE

Рет қаралды 28,676

Күн бұрын

Пікірлер: 33

@HYTMUAE 2 ай бұрын

Wow, good job. I like what you did and want to buy one and do the same. I like that Parkside decided to change their stupid escrow tips so that they can be easily changed.

@sanctuaryexpress Ай бұрын

hey man, where can i find tips for the station that match this model?

@HYTMUAE Ай бұрын

@@sanctuaryexpress This station is new for Parkside, but I think the "900M Soldering Iron Tip" will fit.

@EVCustoms Ай бұрын

Correct...

@Jean-Marc_38 2 ай бұрын

Very interesting setup. The device consumes 60W at24V, which means 2.5 Amps. The battery designed to power the device should provide about 2 hours of maximum autonomy.

@EVCustoms 2 ай бұрын

Hi man... much more than 2 hours, because it's switching, autonomy is somewhere 4-5 hours..

@Jean-Marc_38 2 ай бұрын

@EVCustoms Even 2 hours is already quite good. It's portable, so very useful. 👍

@demonchiki 2 ай бұрын

Взагалі можна було взяти тієї же фірми аккум 4,5а 18 в . Більша ємність і компактніше))

@Antony--DIY 2 ай бұрын

Εεε ρε ΚΑΛΛΙΤΈΧΝΗ... Για κάτι τέτοια είσαι μανούλα!!!😁🤩🥰 Πολύ καλή ιδέα!!!👌

@EVCustoms 2 ай бұрын

😄😃😆

@sanctuaryexpress Ай бұрын

hey man, nice upgrade! do you know where to find a tip replacement for the station?

@EVCustoms Ай бұрын

Yeap... it was difficult to find them.. (900M-T) here i have the link - a.aliexpress.com/_EGrnJky

@phunjap 8 күн бұрын

Hakko T18 tips fits this

@michaelkugelmann8399 2 ай бұрын

Where do you get more soldering tips for this soldering iron?

@Pendebatan 2 ай бұрын

Just buy 24v solder on market.. Easy and cheaper no need any modified😅

@EVCustoms 2 ай бұрын

14euros station and 120w battery 17euros = 31euros for portable station?? believe me you will give more than 120 for cheap one..

@lik0M Ай бұрын

Well..if you are afraid, lack of skill or just too lazy ot do any upgrades, fixes or just thinkering over some devices, why you need a solder at all? Your market is Jumbo 😃

@demonchiki 2 ай бұрын

God gemacht!! Тільки я робив на Т12 жалах в машину на підвищуючому перетворювачи від прикурювача. Автомобільний аккумулятор завжди можна знайти , чи блок живлення для ноутбука.

@didiertoto4645 Ай бұрын

Très bien, mais pourquoi ne pas faire une épaisseur en impression 3D. Si quelqu'un veux bien le modéliser ce serait super.

@korytnacka7english 27 күн бұрын

Is it compatible with some soldering tips like HAKKO 936?

@phunjap 8 күн бұрын

The Hakko T18 tips fits

@doogsm6013 2 ай бұрын

Nice mod but a lot of work and bulky! I normally use a Pinecil and power bank or my Ryobi 18volt 120watt iron for portable use. I also have a pretty decent butane iron but I rarely use it Most of my soldering is done on the bench and I have 3 different Yihua combination soldering stations at hand (hot air /iron, vacuum de-soldering gun/iron and tweezers/iron) plus a Weller 120 volt 150 watt gun and Weller 12 volt pencil (which sucks) as well as a couple of unregulated 120volt irons so it looks like I have a bit of a soldering iron fetish!

@alessandroandrenacci2372 2 ай бұрын

I like that tool you are using for soldering batteries ... can i have some info where i could buy it, and how much is quoted its price ?

@EVCustoms 2 ай бұрын

SEQURE SQ-SW3 STORE - sequremall.com/collections/spot-welder/products/sequre-sw3-energy-storage-spotwelder-lithium-battery-spotwelding?ref=EV_CUTOMS&variant=44125597434044