Рет қаралды 92,844
I have designed a simple and nice output voltage adapter for all Parkside X20V PAP series batteries. One version is with an external terminal block connected with a two wire lead, and the other version is connected with a thicker lead that can be clipped to an integrated terminal block on the adapter body. I used the proven WAGO 221 lever clamps as terminal blocks, which can tolerate higher currents and a wide range of wire diameters.
A simple version of the battery outlet can also be mounted to a panel or wall with screws. The adapter can then also serve as a battery holder. For panel mounting, it is better to use suitable spacing between the battery outlet and the panel, due to the offset from the substrate to allow the battery to be ejected.
Commonly available insulated or non-insulated Faston crimp connectors are sufficient to make the contacts
All 3D models can be purchased from this link:
cults3d.com/en/3d-model/tool/...