PART 1: Fix Viking (Optima) 630 / 620 / 610

[@jeannineunser5580]

Thank you.

[@Snail_Nailz]

Np - glad it helped!

[@LailumaAfghan-t7y]

Who con we make thise machine if it be come wrong?

[@xandraphilimon3931]

Hi, I'm looking for the way to open the sewing foot of my husqvarna optima 610 to replace the electricity wire. Can not find it online...

[@Snail_Nailz]

Sorry I don’t know much about sewing machines...this is just an issue I was able to fix on mine

[@noahtippett324]

Follow Jess's video for removing the back of the Optima sewing machine, Then you need to remove the cover on the lower section which is held in with one philps head (cross head screw) and this will give you access to the foot, There are no electrics in this area though!. If this is because the machine has stopped working it is more likely a blown capacitor on the board under the machine and not the foot pedal. It can be mended by an electrician who solders and does board work. You turn the board upside down and undo a screw slide the board and lift out. If you want to open the foot pedal you need to turn it upside down and insert a wide flat head screwdriver between the top and the bottom pieces at the side as close to the hinge as possible, gently twist the scredriver and it will open up the hinge/ pivot enough to pull it apart once this is done the other side will slip out Getting the box out that houses the mechanism out of the housing also requires screw drivers inserted between box and clip and will pull out but this is tricky. The box itself is hard to open and needs prising open to break the black heads that hold it in place you will then need to tape it back together once mended.

[@Snail_Nailz]

Thats awesome - thanx for chiming in Noah!

[@رجاء-ب9ر]

لن افهم اللغة الفرنسية هل يمكنك الترجمة عندي نفس المشكل