Part 2: Case 1845C Parking Brake

[@zofflex]

Really good video, wish you make more of them. One I need is about bucket going down on its own with machine off, 5-½" in 2 hours.

[@ke6bnl]

That was very helpful video

[@ronnierominger9746]

Hey brother how tf did you get that pin out holding the parking brake mechanism? We been working on it for the last 6 hours and cannot get it to budge. Thanks brother

[@kevinkurtz9889]

To remove the internal snap ring, can it be done from the top under the seat? Or is it better to remove belly pan?

[@wohldog5248]

You said that you would show what happens when the parking brake pin sticks in. The reason I ask is that I just bought an 1845C. The one pipe that the brake pin slides in is bent and leaking oil. I think this is what happened. What keeps the oil from coming out around the pin when it is working properly?

[@Caseguy1845]

There is too much oil in the car or it filled with water if it is leaking. There is only 6 qts of oil in each chain case.

[@railroadjesus49]

When the cable breaks do the chocks just fall into the oil reservoir?

[@Caseguy1845]

Yes many times and the spring will often get caught on the drive gear.

[@Tongieone]

But how do you get the staple pin out to remove the stop and spring?

[@Caseguy1845]

You have to pry at it with a screw driver. Once there is space get a small hammer and punch and knock it out.