Part 2 How I Make My Airdry Clay Pots Waterproof | art vlog # 42

[@L_Martin]

2 layers modpodge, 3-4 layers acrylic water seal

[@kreaturekozzy9309]

My first time watching your videos, and I already learned something from the introduction alone. Your sculptures don't need to be perfect to be beautiful. I consistently need to remind myself that perfection doesn't exist!

[@sheraboo6374]

This is brilliant!!! Thank you for not gatekeeping this

[@enondebelen]

Hehehe thank you ☺️

[@dgog.3595]

I think we are a few trying to make our dry clay pieces waterproof. Thank you so much for sharing this technique. Love your art! 👌🏼👌🏼

[@enondebelen]

Thank you very much!

[@TheAmani0699]

I’ve been searching for so long and this is the first video to help me with what I wanted thank you 🙏🏾

[@enondebelen]

Thank you! I’m glad to have helped

[@darenapopova4394]

Fantastic! Thank you very much for sharing. Your designs are so pretty as well!

[@enondebelen]

Thank you so much!

[@sourbanna]

I made a close of toast with butter cause I was bored and desired to make it a soap bar holder but didn’t know how to water proof it 😭 so thx

[@Meowycarr]

Just found out your channel a while ago, i just want to say that your works are beautiful and your videos are really calming

[@enondebelen]

Thank you very much!

[@selaphroven3071]

Thank you! Now, this is what my earrings need.

[@enondebelen]

Good luck! :)

[@selaphroven3071]

Does the pungent smell stick after it dries up?

[@crystalgem25gillum27]

Absolutely beautiful, I hope your business does well ❤

[@enondebelen]

Thank you! :)

[@nanasue4481]

Absolutely gorgeous work. All your hard work really pays off. Thanks so much for showing us your processes. Your videos are are not only very informative but really relaxing to watch. Your pets are also very cute!! 🙏🙏🙏🤗

[@carlycharlesworth1497]

Your pieces are extraordinary and strikingly beautiful. I love the colours of clay you use. Can you please tell me, what do you do with your sculptures? If you sell them, can I have the link to your shop site? Thank you.

[@enondebelen]

Thank you. Yes, I do sell my sculptures. (Just not these pots as of the moment). You may check my website enondebelen.com for my available pieces.

[@BlueMoonShelly]

I just discovered your amazing channel this morning! Thank You for all that you share and do 💜☮️🙏🏼✨

[@enondebelen]

Thank you so much! :)

[@wakeuppeople777]

Lovely work! So creative ❤️❤️❤️

[@roobsi6947]

Can I make a water colour palette using this method.

[@enondebelen]

Hmmm, I think you can. Just be extra extra careful with it.

[@CamillaDrakenborg]

Im just about to get into air dry clay & happen to have dishwasher safe modpodge. With that I wouldnt need another layer of the acrylic seal, Im guessing?! Wicked sculptures! :)

[@enondebelen]

Hmmm, I had that dishwasher-safe Mod Podge a couple of years back and tried to submerge a clay covered with it on water. The water seeped in the clay. I would still recommend using an acrylic water seal.

[@158cms]

thank you! this video has been very helpful! ❤

[@enondebelen]

Thank you! I’m glad it helped :)

[@anbakzking1052]

Its so clam to watch 💙 it helps me clear my mind for a while..nice video 🥰

[@enondebelen]

ahhh thank you. That's my goal in making these videos.

[@alvakercoff]

can you make cups and other waterproof things too? btw I LOVE your sculptures!

[@enondebelen]

Pottery? I haven’t tried it yet but I would love to.

[@elizabethbrown8833]

So talented . 😊🙏🏻🥀

[@enondebelen]

Thank you! :)

[@elizabethbrown8833]

@@enondebelen 🥀

[@CajunPride777]

Beautiful pots👍

[@enondebelen]

Thank you!

[@amycece7521]

Hi, if possible can you share what product you have used for the sealant. Im trying to search online, im not sure the ones im finding are okay. They look very industrial. Thanks so much for the tutorial and tips by the way. Its super helpful and you are very artistic ❤

[@enondebelen]

It’s called acrylic water seal by Bosny. It’s available in a can and as a spray. I bought it from our local hardware store.

[@amycece7521]

​@@enondebelenThanks so much. Do you ever paint your sculptures? If I wanted to paint them different colours, should I just paint them first and then continue on with the same process? Or could i just skip the modpodge altogether?

[@sevrainne]

@@amycece7521 I'm no pro but I've dabbled in clay before and 100% use modpodge as a primer before painting, otherwise the clay just soaks up all the paint and makes it extremely difficult to glide/blend

[@amycece7521]

​@@sevrainneI will definitely try that thanks so much for your advice, much appreciated ❤

[@GundamGir1]

I usually just paint them the colour I like then once dry seal with yacht varnish.

[@enondebelen]

Nice!

[@Valentina-tm5wi]

Thank you!!

[@_____mamallama]

Hi, would you use the same for candle jars (not candle holders but jars where you pour wax in)? Or some different sealant should be used for candles? Thanks 😊

[@enondebelen]

Hello. That’s a very good question. I haven’t tried it yet. But I think it would be okay? Just as long as there’s no direct heat or too much heat to the pot. I will try with one of my pieces. I will let you know :) (or might make a video of it in the future)

[@cindylee4508]

Love your pots! How many layers of acrylic water seal you put on and where you buy it?

[@enondebelen]

I applied 2 layers. Acrylic water seal by Bosny, I bought in our local hardware store

[@kalpersaud9132]

You mean "test if it REPELS water" lol great video, i needed this, can you use this method with the creyola air dry clay? Also where did you buy the sealer?

[@enondebelen]

I haven’t tried Crayola air dry clay yet. I bought the sealant in our local hardware store. It’s an acrylic water seal by a brand Bosny.

[@brigittahoffmann9283]

These are so beautiful, gorgeous pots, 😍😘💋

[@enondebelen]

Thank you! ☺️

[@BhagyaSivaraman]

Hey can you drill a hole at the back after it’s dries?

[@enondebelen]

I suggest putting a hole when it’s still wet. The clay might break if you drill on it.

[@TamaSarkarArt]

You're extremely talented.. ❤️🥰👌

[@enondebelen]

Thank you!!!

[@miraculousfan6893]

What are the materials u used other than mod podge thx

[@enondebelen]

Acrylic water seal Bosny

[@emily_sophia_gonzalez1289]

I found this video very helpful, but unfortunately I’m unable to get my hands on the water seal you used are there any others similar to the one you used?

[@enondebelen]

So far, this is the only one I have used. There are some comments on my channel that say they used yacht varnish? I guess any of those heavy-duty waterproof sealant that you can find in hardware stores would be okay. You may try it in just one piece, then if turns out good, then you’re good. :)

[@user-mj1vc1xs3v]

hey, i love your work! i was wondering if the finish of the mod podge matters (i.e. matte or gloss finish)? also does the mod podge make the finish look streaky? thank you!!

[@strawberrycheese5373]

Someone said it prevents it from yellowing or like the color dulling, something like that, so I would do it just incase!

[@enondebelen]

A layer of Mod Podge (whether it’s matte or gloss) prevents the color of clay from changing IF you’re adding a water sealant on it. But if you’re gonna use the Mod Podge as it is, it adds a bit of shimmer on the clay (even the matte one). Honestly I want the clay to be as raw as it can, but adding a finish puts extra protection on the clay.

[@hippychick2879]

Would this aproach work on painted and already dried airy dry clay and also. Would this aprpach work on airdry clay jewellery???

[@enondebelen]

Yes I think so. With jewelry, I’m not sure. Since it would be in contact with skin, the acrylic sealant might be a skin irritant to some

[@CerridwenVids]

Would dabbing the modge podge and acrylic water sealant work on projects that have been painted?

[@enondebelen]

I think so. 👍🏽

[@o0Daisy0o]

Does the terracotta air dry clay work in the same way as traditional terracotta plant pots? The reason a lot of gardeners and houseplant lovers use terracotta pots is it absorbs water so it keeps the soil moist for much longer, which is great for the plant. If you seal inside, I presume that’d prevent it from holding any moisture? That’s the main pro of terracotta pots. Unless the air dry version isn’t meant to work in the same way?

[@enondebelen]

The term “terracotta” in this video pertains to the color of the airdry clay used. Jovi airdry clay has three color variations - white, gray, and terracotta. That’s what I am using in this video. It doesn’t work the same as the traditional terracotta pots because if it’s left in contact with moisture, it will absorb the moisture and will eventually break. Airdry clay doesn’t need firing unlike earthenware so it’s more fragile and more water-absorbent, that’s why it needs to be sealed with a sealant to make it more durable and water-resistant.

[@jamialaprince6556]

Have you found and acrylic varnish with a matte finish that you wpuld recommend for water proofing?

[@enondebelen]

I have not.

[@crunchyrds]

does hair or dust stick to these?

[@enondebelen]

When it dries, no. Dust gets inside the nook and crannies though.

[@hilmiyalfaruq]

Do you have any tips to seal the water drain? How to seal the inside part of the drain? I'm afraid I wouldn't seal that part well enough...

[@enondebelen]

You mean the hole on the bottom of the pot? Just use the acrylic water seal as usual with the brush that can touch the sides of the hole

[@shailipatel4363]

Could you share the link for acrylic water seal. Or any other sealer that you could recommend.

[@enondebelen]

Kindly search for Bosny water seal in Google

[@MissChelle]

Your work is incredible! Are these waterproof enough to be submerged in water? Like a fish tank?❤️🇦🇺

[@enondebelen]

Thank you. I wouldn’t recommend.

[@Nanassugars]

Thank you so much for sharing this! Would this process b safe to use on air dry clay dinner plates?!

[@enondebelen]

Maybe for decorative purposes only. Airdry clay is not recommended for daily functional use because it’s porous and not as strong as clays that need to be fired (ceramics, stoneware, etc).

[@moomflr4367]

Are these food safe?

[@enondebelen]

No, they’re not.

[@scoobybag]

I kinda dig the stain

[@gabby2549]

When would you paint the product, before or after mod podge?

[@enondebelen]

Before. Sealant is always the last

[@wanderingintime]

hello! beautiful work. 💗 I was curious since the 1st video.. can you put dirt and plants in here? or would the moist dirt degrade the layers of sealant and then the pot over time?

[@enondebelen]

Yes you can put soil and plants in these. The waterproof sealant is the layer that separates the clay from the soil and water. If you noticed in the part 1, I showed a similar pot a made a year ago. The pot and sealant are still intact. Though I recommend low maintenance plants with these the don’t require a lot of watering like cactus or succulents.

[@wanderingintime]

@@enondebelen thank you!

[@shatakshijoshi4389]

Can this be used in mugs? Is it food safe? I can't find any food safe glaze/sealer

[@enondebelen]

This is not food-safe. It can be used for mugs but just ornamental or for display.

[@arch.saraleavillavicencio-771]

Hello! How do you thin out the acrylic sealant? Like if it was exposed and gets too viscous. Also for cleaning the brushes/tools. Thanks!

[@enondebelen]

Hello! I haven’t tried thinning out my acrylic sealant so I’m afraid I can’t tell you any. Maybe there are solvents out there? I’m not too sure. Maybe it’s better to buy a new one and make sure to cover it tightly when not in use hehehe. I’m a bit lazy when it comes to cleaning my brushes 🥲. But the brushes that I use for applying acrylic sealant gets soft again when I dip them in the acrylic water seal. It’s a solvent type.

[@arch.saraleavillavicencio-771]

@@enondebelenthanks for the response! I've seen acrylic thinners online I'll see if it works. Also I've seen a water based water stop but in a bigger size, maybe you could try that

[@ReneeW59]

Beautiful! Do you think this would work to seal palettes for watercolor painting?

[@enondebelen]

Thank you! Yes, I think it would work as a paint palette. Just make sure that the clay is thick, around half an inch or so. Then maybe 2-3 coats of waterproof sealant. 👍🏽

[@ReneeW59]

@@enondebelen Thank you so much for the reply!

[@L_Martin]

If you were to paint them, would you apply the modpodge on top of the paint? Or would you first do the 2 coats of modpodge and paint on top of that, before sealing it with the Water Seal?

[@enondebelen]

No need for Mod Podge if you’re gonna paint on them. Clay, acrylic, water seal.

[@L_Martin]

@@enondebelen Thank you!!

[@yogn8848]

What's the diff between white airdry and the teracotta one? Is there anything you can recommend instead of mod podge? It's too expensive for me 😢new subscriber btw

[@enondebelen]

Their difference is just the color. Before I used Mod Podge, I used Elmer’s glue mixed with water because it’s a cheaper option. But overtime, it turns yellow so I wouldn’t really recommend it. I haven’t discovered anything else aside from Mod Podge.

[@55rizamazhaba53]

I am not able to find bosny water seal (in india)..so can u pls recommend some other sealer that will be easily available and good..plss

[@enondebelen]

Have you tried searching in Google “waterproofing sealant”? It might show some items that are available in your area. :)

[@howlingwind1937]

Can you use the clay to make a cup and use the cup once its been sealed with the 2 sealants.

[@enondebelen]

You may use this type of clay to make a decorative cup, but not a cup where you can put hot or cold drinks because 1, it’s not food-grade. 2, it might break easily.

[@howlingwind1937]

@@enondebelen OK thank you for the info, I'm new to this craft so just wondered what the usability could be, I'll explore other ways to use it.

[@enondebelen]

@@howlingwind1937 I see some make incense holders, flower holders, candle holders with airdry clay. I made some myself but the ones I made where the the sealed clay comes in contact with heat, I wouldn’t really recommend. I am still yet to experiment other sealants. So far I tried Mod Podge, Bosny water seal, and UV resin, all of which I won’t recommend if the sculpture will be subjected to heat. Airdry clay is mostly for decorative or ornamental purposes only. If what you’re looking for is something with functionality, what’s best for you are clays that require firing such as ceramic, stoneware, and porcelain

[@howlingwind1937]

@@enondebelen thank you so much that's great advice, I'll make a few plant pots, it'll help get the skill down for maybe changing to other clays, and it looks like fun anyway. Cheers!

[@rebeccasiow5065]

How long does each layer of water proof sealant take to dry?

[@enondebelen]

On the label, I think it says 24-48 hours to cure. But I apply a second layer as soon as the first one feels dry to the touch. 😅 Usually it would just take 30 minutes.

[@marreyes1879]

Thank you so much I have had this problem for so long 🥲 does it need to mod podge or can varnish be used instead? I use acrylic varnish, and I don't know how the water seal may react with varnish. Does a specific type of water seal have to be used?

[@enondebelen]

Hello ARMY💜 Hmmm, I’m not sure about acrylic varnish. It think it might be a good alternative to Mod Podge. You can try a little on your clay

[@angkelbo]

Hi enon, do i still need to apply mod podge if i painted my clay with acrylic?

[@enondebelen]

Hello! I still do in mine for added protection.

[@maryamchoo1518]

Hi! May i know, if i wanted to paint the planter, should it be done before or after sealing?

[@enondebelen]

Before

[@maryamchoo1518]

@@enondebelen thank you! And thanks for sharing all your contents, your work is amazing!! ❤️

[@enondebelen]

@@maryamchoo1518 thank you! And thank you for watching also :)

[@Carcpiano]

How long after applying the Mod Podge do you then apply the sealant ? Cos it’s stated that Mod Podge takes 4 weeks to cure and I’m wondering if I really do have to wait that long. Thank you so muchhh

[@enondebelen]

I apply it immediately once it’s dry to touch. 😅 Maybe just a couple of hours. So far, the pots are still good even if I don’t wait that long

[@Carcpiano]

@@enondebelen perfect! Thank you so much for your reply. I’m gonna go apply my sealant now 🤣 have a great day!

[@roopashekar9969]

Does not it get break once dried we don’t need to bake it

[@enondebelen]

It’s air dry clay. It doesn’t need baking. You just need to let it dry. It will not break unless force is applied to it (e.g. falls on the floor, throw it).

[@roopashekar9969]

@@enondebelen Thank you very much for your reply love all your videos ❤

[@BeMyArt]

I thought that pot on video cover looks like Jimin from BTS but know i checked your channel and it's definitely not a coincidence😅

[@enondebelen]

ARMY eyes 💜

[@journieornelas7744]

Hi there, If i were to use this technique on a clay cup would this support liquid?

[@enondebelen]

Before I went on and make a collection of this, I tested first if it can actually hold liquid for long periods of time. With acrylic water seal (a waterproof sealant), yes it does. But I wouldn’t really recommend.

[@journieornelas7744]

@@enondebelen Okay thank you so much!

[@YooYoo27]

oh i dont know bout this one. i thought its not possible to make an air dry clay pot for plant 😅

[@necolecosgapa6610]

Can you drink on it??

[@enondebelen]

Technically, yes. But 1, it’s not safe because the sealant is not food-grade. 2, it is not advisable to use this like mugs or cups made with ceramics because it’s not as durable. Air dry clay is recommended for display or decorative purposes only, or ornaments such as this pot with zero to minimal movement and maintenance.

[@necolecosgapa6610]

@@enondebelen oh thank you 😚

[@fatimapontesdecamposfa6980]

Lindoooo

[@restauriorestoria1332]

Hmmm would a spraying of clear matte before waterproof work?

[@enondebelen]

I think that would work too? Just as long as it won’t stain the clay. I haven’t tried the spray types yet.

[@restauriorestoria1332]

@@enondebelen hmmm Ive only done sprays after its been painted and so far its turning out well

[@diceomo48]

If I wanted to paint my pot before making it waterproof, would I paint it before the mod podge layers? Would it affect the colour of the paint?

[@enondebelen]

If you’re going to use acrylic paint, you may go straight to waterproofing. It won’t affect the color of the paint. But if you’re going to use other colorants such as watercolor or soft pastel (those are what I’ve tried so far aside from acrylics), you must use a spray-type kind of sealant because the colors get reactivated once it gets in touch with something wet, so you don’t want to use a brush with that. But paint -> Mod Podge -> waterproof sealant layers won’t hurt.

[@diceomo48]

Thank you so much that's so helpful!!

[@karenvallejos758]

May I know what clay do you use?

[@enondebelen]

Read: title of the video

[@LeoStyleeez]

welp i learned the hard way when my little garden gnome just melted away 😢 trying this method

[@CnithTheOnliestOne]

Usually with waterproof deck sealers, you have to reapply after a few years. but you don't have to with these pots?

[@dasei777]

I’d guess not, since they probably donst get wet as often. Idk for sure though

[@CnithTheOnliestOne]

@@dasei777 what do you mean? They water the plants, so yes, they're getting wet often

[@dasei777]

@@CnithTheOnliestOne oh.. right. I thought of them as decoration, not actual pots

[@marninegley]

Why not just use a kiln?

[@enondebelen]

I have actually tried making a couple of pieces with ceramic clay after doing this video. Renting a kiln is kind of expensive for me right now but hopefully I will have a budget for it someday. I’d love to make ceramic pieces in the future. So for now, I make use of airdry clay that doesn’t need firing in a kiln.

[@alfonso3990]

Help me please. I painted my clay with acrylic paint an after waiting for many days for it to fully dry. I applied 2 coats of pva glue(mod podge alternative) to seal it. After waiting for a day, I then put my first coat of acrylic matte. It's fully dried now and it stained my sculpture because it left this white look. Any help? Do I have to mix the matte with water?

[@enondebelen]

What color of acrylic paint did you use?

[@alfonso3990]

A mixture of brown and yellow

[@alfonso3990]

Also while I'm sealing the clay, the paint is coming off, kind of like "paint chipping"

[@alfonso3990]

​@@enondebelenhi! Do you have amy recommendations to help me? Would really appreciate it! Thanks Because while I'm sealing the clay with glue, the paint is coming off Right now I'm sealing it with acrylic matte an it's still coming off :(

[@enondebelen]

@@alfonso3990 are you using water in your acrylic paint?

[@yogaqueen1527]

Why no sound?

[@enondebelen]

There is a sound

[@kalpersaud9132]

10000 likes just for the doggy

[@leonorfelix9617]

Are you on instagram

[@enondebelen]

Read the description

[@dlynch4ever]

This video was so informative and your work is so beautiful. The link to your website did not work. Thanks again

[@dgog.3595]

I think we are a few trying to make our dry clay pieces waterproof. Thank you so much for sharing this technique. Love your art! 👌🏼👌🏼

[@dgog.3595]

I think we are a few trying to make our dry clay pieces waterproof. Thank you so much for sharing this technique. Love your art! 👌🏼👌🏼