Part 3 - 1964 -1966 Chevy C10 DIY Convert Manual to Power Window Regulator

Part 3 of 3 1964 -1966 Chevy C10 DIY Manual Regulator Convert to Power Window Regulator
It's possible this may work from 1960 - 1966
Check out the forum for updates on the project:
67-72chevytruck...

[@deankay4434]

This window regulator has been used by GM for about 30+ years. The smaller of two gears is always called the "Pinion", but the teeth are smaller on new mid 90's vehicles. This power window conversion can be found on the forum 67-72C10 trucks. Remember, installing the spring in the direction to help raise the window as the weight and gravity help it down. Wiring can be several different ways but fab a bracket that limits the window crank about an inch up or down to stops to a micro-switch to operate a normal GM style power window relay. It reverses polarity to provide both directions of window movement. Best of luck with your cool old Chevy! ASE Master since 78.

[@curtispinson]

Thanks ,, hope it will work for my 1967 C50

[@anthonychayrez4499]

Cant see nothing

[@VanGentFamily]

If you go to the forum ( 67-72chevytrucks.com/vboard/showthread.php?t=747871 ) there are more details and up close photos.

[@atmebro6725]

What is the wiring harness part number ?

[@curtispinson]

@@atmebro6725 better off to find at a junk yard ,, they want like 30 bucks for the pig tail,,,same plug on most GM vehicles

[@deankay4434]

@@atmebro6725 You can look up connector options on Rock Auto by make, year and model. Dorman, ACDelco and perhaps other options.