Qual a calibraje das unidades de válvulas desse motor D5D
@zeeshanaminzeeshanamin98092 жыл бұрын
Thanks sir
@brianmackie72326 ай бұрын
Thanks so much for this series of videos! My manager and I were arguing about how the fuel system worked on our D4D CAE2 (BL60), and this perfectly explained it all! You're very articulate about the way the parts work. That fuel control rod is a crazy design! I'm curious: it looks like there is only one cam shaft, which sits right below the injector pumps. Are the pumps driven by that cam directly, and then the valves are running off the same cam, by push-rods? Also, is the oil pump on the rear of the block? Fascinating engine, thank you for any answers you can provide :)
@ironore18666 ай бұрын
Thank you for the positive feedback! I would have to look at a diagram to answer your questions. I don't work on this engine everyday.
@chriswelters58233 жыл бұрын
Nice. Did you find it difficult to source new parts? Gaskets, seals, orings, and other stuff?
@ironore18663 жыл бұрын
A lot of the stuff you can find online. Ebay has stuff, you have to use different spacing of the motor type for some reason. The volvo and deutz dealer are super expensive.
@chriswelters58233 жыл бұрын
@@ironore1866 good to know. Being that volvo stopped making the backhoe for some time now I was curious.
@ironore18663 жыл бұрын
@@chriswelters5823 Thank you for the question. Yeah this one is a 2008 so 13 years old now.
@chriswelters58233 жыл бұрын
@@ironore1866 I just looked at one tonight. I have a few questions for you. Will you email me?
@ironore18663 жыл бұрын
@@chriswelters5823 Sure
@user-ue6tx5up8k4 ай бұрын
Verby good
@ironore18664 ай бұрын
Thank you for watching
@srutherfordr12 жыл бұрын
Do you happen to have an extra good injector pump you would get rid of or know where I can order one? I have the same backhoe and I have one that is stuck open that needs replaced.
@ironore18662 жыл бұрын
Try Stauffer Diesel in Ephrata, Pa, or your local Volvo dealer
@twogeezyhiltaterz6051 Жыл бұрын
If stating drain betry fast
@isabelinobogado1883 жыл бұрын
para entender mejor
@ironore18663 жыл бұрын
Click on the “Settings” icon, select “Subtitles/CC,” and then click “Auto Translate.” A list of languages you can translate into will be displayed. Select “English.” You'll see that the subtitles have automatically been translated into English.
@asokanarajun18597 ай бұрын
4cylinder valvo engine dutz injection pump,nozzile calibration after no starting why?
@ironore18666 ай бұрын
The way the question is phrased I am not sure what you are asking.
@shapsug-shahetrueno86692 жыл бұрын
Перевёл бы кто
@sunandabhunia57263 жыл бұрын
Unit injector is repairing?
@ironore18663 жыл бұрын
Yes, Unit is running. You can check out first start video if you like.
@sunandabhunia57263 жыл бұрын
@@ironore1866 unit pump is repairing done by you?
@sunandabhunia57263 жыл бұрын
@@ironore1866 unit pump and injector calibrate a vedio done
@ironore18663 жыл бұрын
@@sunandabhunia5726 Yes, I am the one in the viedo
@ironore18663 жыл бұрын
@@sunandabhunia5726 Yes, It has the proper size shims for each injector so the cam will have the injector working at the proper time. If you replace the injector with a new one you have to replace the shim with the proper size for that particular injector.
@franciscofernandez20692 жыл бұрын
Puede en castellano
@isabelinobogado1883 жыл бұрын
como puedo puedo escuchar el audio en espanol
@ironore18663 жыл бұрын
Click the settings (gear) icon, select Subtitles/CC, then select Auto Translate. You'll get a long list of languages you can translate into
@DanielHernandez-jc5ti2 жыл бұрын
Español
@ismetalgan455410 ай бұрын
Kasnakta ne var Usta numaramı var neye göre yapiyon