This would be a great game to get started on hardtops. Partial playfields would be easier to line up than full ones. I've done a dozen now and really enjoy it. Yes, intimidating, but worth every penny!!
@pinballshenanigans2 жыл бұрын
Oh wow! How do yo find dealing with rollover inserts? Hard to remove them?
@dansledepot1072 жыл бұрын
@@pinballshenanigans I would suggest buying new star rollovers. I heated the old ones up with a hair dryer and pounded them out from the bottom. You'll want new anyways to match the gorgeous hardtops. PinballLife has them. Probably Marco also. I use a small sanding barrel in my dremmel and work the rollover holes open a little bit at a time. You can do this!!
@pinballshenanigans2 жыл бұрын
@@dansledepot107 Awesome! Great tips! I do have some of the star rollovers in stock as well. They are a nice touch and much easier to swap then clean the old ones!
@danijelcar51842 жыл бұрын
Nice job done on lower playfield 😎👍
@pinballshenanigans2 жыл бұрын
Thanks 😁
@carlosfields99372 жыл бұрын
Brother Mike I found it. Straight down the middle- Cary Hardy. How to install a hard top. (swords of fury).published October 1st 2020. Total run time 32.43 There's a few video's, so you should be able to find it with that info. Have a good one.....
@pinballshenanigans2 жыл бұрын
Nice work! Thanks man, I will check that out!
@carlosfields99372 жыл бұрын
@@pinballshenanigans Anytime...
@TiltingT2 жыл бұрын
Interested in seeing which way you are going to go, hardtop or no hardtop, It will look brand new if you go hardtop and I think you have the skills to pull it off
@VaxxedStories2 жыл бұрын
How cool would it be to explore pinball playfields from the perspective of a cat? So, for humans, we could create a raised glass floor in our room (about 6" from the real floor) and then under the glass recreate the artwork and playfield elements of an actual pin!
@pinballshenanigans2 жыл бұрын
Oh cool idea for gamesroom or arcade!!
@gallimead2 жыл бұрын
Hard top for an Elektra?? Doesn't that have a plastic playfield??. Use a dremel with a tile cutting bit for the rollover stars. Comet pinball is better for 555 LEDS. This is going to be a lot harder than it looks!!
@pinballshenanigans2 жыл бұрын
yaman I am taking the easy way out on this one lol but yep the main playfiled is plexi but they do make a HT for all 3 playfields!