Part 9: ConfigMgr (SCCM) CB 2002 Post Installation Tasks

[@TekNexSolutions]

📌 Checkout full playlist here kzbin.info/aero/PLuB-nSPBO_bNRt9FwrocOlZf4prT-Oa3J 📌 This playlist is applicable for new baseline Current Branch version 2103

[@rosyskitchen6746]

Thanks TekNex Solutions! I am all set with my 2002 lab setup now. Heading back to the previous 1802 series to continue with the videos. Thanks so much! You are the man!

[@TekNexSolutions]

Sounds great!

[@gunjansethi81]

Thanks TekNex. I am progressing slowing using your tutorials. Much appreciated.*****

[@TekNexSolutions]

You are most welcome. I am glad my videos are helping you.

[@maapakistan647]

Hi Jay do you have any video in this series to configure and push OS to clients. The only one I saw was 2 years old. I thought you will also make a video to explain how to prepare to deploy the OS through SCCM. Please let me know. Thank you

[@TekNexSolutions]

Hi Maa, I do not have any video on that. It is the different deployment type. You could use similar TS for both PXE and ConfigMgr. I will try to record a video on that. Jay

[@hom1347]

Hello Jay, I have a problem at "AD group Discovery". When I browse to add location, my AD folders don't show up... I cannot move forward.. can you tell me why this problem please ? Thank you

[@TekNexSolutions]

Does the account you are using in the ConfigMgr console has at least read permissions?

[@ssrinivas42]

Hi again, How long would it take users, devices, and groups to appear on the Assets and Compliance tab? I couldn't see any imported users and devices, also the logs file for discovery hasn't been created in the Logs folder yet.

[@TekNexSolutions]

It shouldn’t take long. May be 5-10 minutes for a small environment.

[@itsappi]

Hi again, Up to which part do I need to continue to follow this playlist if I wanted to learn how to only re-image machines using MECM? This will be the only task we are setting MECM. Not planning to deploy the agents to our machines. We have another product to deploy patches, etc.

[@TekNexSolutions]

You can check part 17 of this playlist here kzbin.info/aero/PLuB-nSPBO_bP2sEzbVc7_T34jN6Fy9xtK. Edit: Check part 16 as well.

[@TekNexSolutions]

Check other videos as well. It is good to understand how other settings work.

[@itsappi]

TekNex Solutions thank you!

[@itsappi]

TekNex Solutions do I need to follow part 10 and 11 of this new playlist?

[@TekNexSolutions]

@@itsappi Part 10 is about the Client Push Installation service account and Part 11 is about HTTPS communication. Both videos have prerequisites I recommended, you will find the description of each video.

[@glorykany3998]

Hello, I had to configure SCCM on my VM, every time I try to start the console with a domain account that is admin, I always get an error message telling me that my account does not have permissions necessary to start the sccm console

[@TekNexSolutions]

Which account did you use to install ConfigMgr?

[@glorykany3998]

@@TekNexSolutions lthe local admin account

[@discipleofjesus2969]

Do you know how to implement mbam in window 10... please make a video on that

[@TekNexSolutions]

I do. HTTPS enabled MP/IIS is one of the prerequisites. I might have to make a video on how to configure/enable HTTPS communication. Also, it cannot be tested on the VMs. The physical client is required for that.

[@jimmyk2631]

Dear Sir, Hope You Are Fine There.... In My Company, We are planning to upgrade all the PC's from windows 7 to Windows 10. So We installedSCCM and tried to upgrade. But Some Of the reasons, it is failed. If you don't mind can you assist with me to find the solution for this. It will great help for me. Error: FAILED TO CONNECT TO REMOTE DISTRIBUTION POINT. ( Distribution Manager Failed To Connect To The Distribution Point. Check Your Firewall and Network Settings. ( We checked Firewall, Network Settings & MCAFEE etc. Please Help Me ) Thanks in advance.

[@TekNexSolutions]

Hi Jimmy I am fine and hope you are fine too. This sounds like a complex issue and I need more information regarding your environment. I am assuming your site status is healthy and you may have tested upgrade on a device before deploying it in production.