Partner HG 55 12 Hedge cutter will it start and run

[@VintageEngineRepairs]

Thank you for the kind shoutout Nev mate :) much appreciated buddy! Going to watch the last part of this video tonight over dinner!

[@tinkeringtaylor3053]

Not a problem Tom,thank you for watching and the comment 👍👍

[@TheLawnmowerLady]

Cheers Nev! Thanks for the shoutout. Good to see that trimmer running in the end.

[@tinkeringtaylor3053]

Not a problem Stella, thank you for watching and the comment 👍👍

[@Jaythatdrainguy]

Awesome job that you got that hedge trimmer running. I would have been so lost trying to work on those things. I'm completely useless when it comes to mechanics. Great video! Taylor, hope you have yourself a great night

[@tinkeringtaylor3053]

Thanks Jay, it's not that bad working on machines it's all about where parts go back on 😂 thanks for watching, and the comment 👍

[@bigsonslawncare]

Feeding those fuel lines through get me evertime Nev, Once she fired up ran good nice smooth idle. Wish it was a way to idle down people(JK) like you did the saw!!!!!!!!!😂😅

[@Big_Johns]

🤣 Not a chance, I’m on full throttle buddy!!! 👍🏼

[@tinkeringtaylor3053]

They are awkward but a bit editing you can make it look easy on camera 🤣, it does run good for not been used for a few years and i have just ordered a second hand cutting bar for it, thanks for watching and the comment 👍👍

[@tinkeringtaylor3053]

you definitely are John 🤣

[@Big_Johns]

🤣👍🤣

[@bigsonslawncare]

​@@tinkeringtaylor3053Nev don't stoke the 🔥🚒

[@gravelyman]

Great job Nev. I never saw a fuel line system like that before. Very interesting video my friend. It runs great too b🔧👍

[@tinkeringtaylor3053]

Thank you Artie,got a second hand cutting blade coming next week for it 👍👍

[@markmeadows9838]

Great video Nev👍🏻 nice to see you back 👊🏻👍🏻👍🏻

[@tinkeringtaylor3053]

Thanks Mark, there will be another video out fitting another cutting blade, thanks for watching and the comment👍👍

[@GardenTractorBoy]

It was interesting watching you go through the fuel system. Great job getting it run

[@tinkeringtaylor3053]

Thank you for watching and the comment,I was surprised when it started 😄 got a second-hand cutting blade coming this week 👍

[@fixitorstripitGardenmachines]

Nice one Nev. Watched Half when you put it on and just finished it now. Runs a treat , Great video.

[@tinkeringtaylor3053]

Thanks Niel for watching and the comment, i have just ordered another cutting blade from ebay

[@EverydayProjects]

Partner-Pioneer equipment has been around a long time. I was cleaning out an old shed for a friend last year and found an old pioneer saw I put some fresh gas in and it started and ran after sitting for years! Nice job!

[@tinkeringtaylor3053]

I also had a chainsaw as i bought the 2 together but sold it long time ago,only reason i stopped using this was some of the blade snapped off but got a second hand one coming this week, thank you for watching and the comment 👍👍

[@EverydayProjects]

No sweat. Glad to watch what you create! Have a great week !@@tinkeringtaylor3053

[@Big_Johns]

LoL Nev, Renaldo should print that pic and plaster it on his wall of masterpieces!! 🤣 I heard he was trying to get The Home to put a 2-stroke engine on his wheelie chair. 😲 Poor Jason, he had to pick such a difficult name for his channel. 😛 Good work on the hedger Nev. 👍

[@tinkeringtaylor3053]

Never thought of adding broken engine on the chair John, and you saying kerbside fined Renaldo thats why it was there and me having to push you 🤣, i totally admit it i can't pronounce Jasons channel and i do feel bad about it 😞

[@Big_Johns]

Well at least you added the broken rider in the chair. 🤣🤣 Now you know why I only say HR or Jason, the other confuses my mouth too. 🤣👍

[@tinkeringtaylor3053]

@@Big_Johns i was going to edit a video clip of him sitting on his zero turn then you pushing him, but his zero turns are always on the trailer or in the lock up 🤣🤣

[@bigsonslawncare]

​@@tinkeringtaylor3053NEV!!!!!!!!!!!!!!!!!!!!!!

[@Big_Johns]

Very true Nev, it's pretty hard to find a video of one of his mowers in action. 🤣🤣

[@billshedd55]

Nice work Nev! 💯👍🏻

[@tinkeringtaylor3053]

thank you Bill, for watching and the comment👍

[@mr1pearl]

Sounds like a runner to me Nev nice job sir !

[@tinkeringtaylor3053]

Thank you Bill, is sure is a keeper so second hand cutting blade has been ordered for it, thank you for watching and the comment

[@DIYVariety]

Well thanks for the mention nev and renoldo sent ya some artwork how nice. She sounds great now. Cheers

[@tinkeringtaylor3053]

Thank you for Watching and the comment Jason, pleasure in doing a shout out for you👍

[@bigsonslawncare]

My artwork has traveled the seas!!!!!!✔️💯⛵

[@tinkeringtaylor3053]

@@bigsonslawncare it sure has

[@Big_Johns]

Too bad it didn't stay somewhere on the ocean floor on the way over. 🤣🤣

[@bigsonslawncare]

@@Big_Johns JOHN KLEM🤐🤪

[@STTC]

I forget names of channels when I give them a mention, thank the lord we can add captions after Nev 🤣🤣. Stellas channel is doing well now. That was very impressive Nev, first pull! Great to see you on your channel buddy

[@tinkeringtaylor3053]

Thank you Steve its the pronouncing of his channel that gets me. Thanks for watching my video. I do need to start getting more videos out 👍

[@henrymurawskibigdogrepair]

Cheers mate well done

[@tinkeringtaylor3053]

Thank you for watching and the comment Henry 👍

[@thurtletoncrackwinnet1779]

How did you get the new fuel lines in? The lines pass through the top of the tank and act as a seal. Honestly, I am effing stumped and frustrated with it

[@tinkeringtaylor3053]

Picking fuel pipe just a little bigger than the hole cut, cut a point on end then a small amount of oil and push through and pull with long nose pinches keeping them close to the top of the tank, they are awkward to do

[@thurtletoncrackwinnet1779]

​@@tinkeringtaylor3053Good man you are! I got it in. Thanks a million

[@tinkeringtaylor3053]

@@thurtletoncrackwinnet1779 Good to hear 👍

[@grasscutterpalmer3746]

nice work nev as you know I just done a video on the same machine and I got it running but the blades were not moving I went to start it last week and now it won't start and also it is not priming any help much appreciated mate

[@tinkeringtaylor3053]

Might need a carb clean Tim

[@grasscutterpalmer3746]

@@tinkeringtaylor3053 ok nev thanks

[@tinkeringtaylor3053]

Hi Tim, when priming the purge bulb is the bulb slow of coming back out

[@grasscutterpalmer3746]

​@@tinkeringtaylor3053I don't think it is slow in coming back out will have a look in the morning

[@DIYVariety]

Cant watch this video, i can watch anything else but not this video? check back later

[@tinkeringtaylor3053]

🤔🤔

[@Big_Johns]

😂😂😂