Noisy & Not Agitating or Spinning? Replace the Splutch Kit on your Whilrpool Maytag Amana Washer

[@PartsDr]

Is your washer noisy during the spin cycle? Learn how to replace the gearcase here: kzbin.info/www/bejne/iJK2qY13gs6Lg5o Learn how the shift actuator works and how to replace it here: kzbin.info/www/bejne/kHSUi4ObZteofKc Top 5 things to check if your Top Load Washer isn’t Spinning here: kzbin.info/www/bejne/o6apdaGhm8mhg5Y

[@kaosbboi]

I've replaced our bad actuator, but the cam ring keeps coming/ slipping off the new arm actuator after few washes - any suggestions?

[@PartsDr]

Did you replace the actuator with a new OEM Whirlpool part?

[@kaosbboi]

@PartsDr I bought it from amazon i dont think it was oem. I found your tutorial after the change and i think I'll go ahead and replace the splutch as well, because it seems that since the ring rises and falls maybe something is broken inside causing that, the actuator is same on a visual inspection and the washer does function until the arm slides off.

[@PartsDr]

@@kaosbboi We would recommend replacing the actuator and splutch kit with OEM Whirlpool parts, like the ones we sell on our site partsdr.com Let us know how it works out for you.

[@broncheemims8493]

Great video. Pleasr do more

[@PartsDr]

Thanks! Let us know what you would like to see videos on.

[@troymarchbanks8365]

SOLID video 🤙🏾

[@PartsDr]

THANKS! 😎 What kind of problem are you having with your washer?

[@rinatasaet]

Hi, those parts don’t need to be greased?

[@PartsDr]

No, these parts should not be greased.

[@paulholland3232]

Awesome Sauce Video

[@PartsDr]

Thanks!

[@michellenicole6953]

I’ve had to replace this part 3 times in just one year. Any idea why this keeps happening? I never fill my washer more than 3/4 full, usually only halfway full. Whirlpool certified parts and a repair tech fixing it. I’m at a loss

[@PartsDr]

Which component of the splutch is failing and in what way is it failing?

[@michellenicole6953]

@@PartsDrseems to be the cam ring that’s getting completely disfigured and destroyed:(

[@PartsDr]

@@michellenicole6953 It's hard for us to say. Sometimes we have seen the shift actuator that is failing cause the splutch to strip. If you find the solution, please let us know what it is.

[@logangow1640]

My actuator will not shift the cam ring, when attempting to shift its like it's locked up and the actuator continuously pops. Would this be reason to replace the splutch assy?

[@PartsDr]

If you disconnect the shift actuator, can you shift the splutch by hand?

[@logangow1640]

@PartsDr yes, I've been rocking my washer back while its popping and assisting the actuator to shift the splutch, upon doing so the washer continues to function as it should

[@PartsDr]

@@logangow1640 if you can shift it by hand, then the splutch should be good. It sounds like your shift actuator is probably failing and causing the problem. Let us know what you find.

[@logangow1640]

@PartsDr good to know, considering I still have a spare good shift actuator from my last bravos x, thanks for the info. I will let you know if replacing the actuator fixes the issue

[@logangow1640]

@PartsDr so, I've replaced the actuator and I'm getting f7e5 code for shifter fault, is there a recalibration I need to run before it will read properly? Model number MVWX700XW