How to Replace a Shift Shaft Seal on a Motorcycle | Shift Shaft Seal Replacement | Partzilla.com

[@blackflycreations]

Thank you! 74 Suzuki RV125 Rover leaks bad. I put this off thinking I had to split the case! Replacing the shift shaft seal as soon as it gets here!👍

[@Filthynutz]

I was dreading doing this on my zx6r. I had the engine apart putting new shift forks and drum in it… after it was all out back together, the shift shaft started leaking. Thank God you posted this video, saved me from pulling my hair out!

[@chucksnothereman]

Thanks saved me a lot of time on my KTM EXC. I just used a wood screw and levered it out using slipjaws against the frame - too easy

[@spottyjack614]

Thanks a million for your shift shaft seal replacement video..I have a 1969 Honda Z50 that the seal needs replaced..I now know exactly how to do it..and do it easily... thanks so much for your help.......5 stars for your channel 🌟🌟🌟🌟🌟

[@OTEA-vu6ek]

This vedio help me a lot on my cbr f4i no more leaks

[@patrickjones1061]

Nice. I appreciate the DIY. I have a 71 sl70 that will be getting a new shift shaft seal. Thanks you the video.

[@factionfx]

Partzilla, your videos are awesome!

[@sleepyrasta14820]

I just got a new dirt bike only done around 100 miles on it and I've noticed oil around the shift lever don't know if it's just me or because it's a Chinese bike

[@brianworden7022]

I have a 1970 C70M that need this done.. it is a slow leak but still need to address it because it is the bike I take to and from work.

[@ijr7212]

wow this is exactly what i needed thank you 👊🏽

[@bouldernelsonbigfoot]

Damn John, u do Bikes too. Just like me. Lmao.

[@jaybear7891]

What if it still leaks after replacing

[@the_ltz_guymaster7912]

Is it normal to have some back n forth play on a raptor 660

[@trickstarjimmy]

On Yamaha V-star cruiser, the main shift shaft seal is not the one that is visible to the outside like this one in the video. It's buried inside of the crankcase cover, behind a cosmetic seal that basically does nothing but keep some dust off of the main shift shaft seal. You have to remove the whole crankcase and reinstall the gasket. The seal cannot be pressed in flush with the surface that it's being pressed into... You must tap it all the way in, another 1mm to 1.5mm deeper. Otherwise, the seal will be lined up on a recess in the shift shaft, and leak.

[@peterbogers1348]

What V star is that? I have the same problem on my 1100

[@borbaisarat7584]

Just my luck....

[@trickstarjimmy]

@@peterbogers1348 the v-star 650

[@luisduran2638]

hi Partzilla i have ai yamaha 2000 royal star venture and i dont no haw to remove the clutch slave cylinder if you canth do ay video thank you

[@CrowtownAuto]

Which direction does the new seal go on?

[@glowiever]

you can't go wrong. the inner side got a spring holding the inner lip tight.

[@trevorglenny2227]

Hello this has happened to my quad but the hole seal came out help me lol

[@deadbeast99k85]

That exactly what you want lol

[@mikecarr1484]

Just ordered mine. Xt225. 2001