PATCHING WALLS WITH CORNICE CEMENT

[@LucyVignes]

Excellent advice Josh the best I've seen.

[@paintingbyjosh]

Cheers legend much appreciated

[@zacj63]

Great video mate 👍

[@Harry_Bl44346]

Great tips Josh! That stuff is gold and my go to now as well.

[@paintingbyjosh]

Thanks legend. Yeah definitely makes patching a lot more controlled 💯🤙

[@jjonescatch21]

Loved your video. Love the vibes bro. I normally use topcoat, never thought of using cornice cement out of fear it would set too quickly on me while patching up a wall. Good tips and look forward to more videos.

[@paintingbyjosh]

Cheers legend appreciate you watching. Yeah I love the cornice cement. It usually sands pretty easy and the more you use it you will be able to control how fast or slow you want it to set with how much you mix and consistency of the product 👍🤙

[@jjonescatch21]

@@paintingbyjosh hey mate - I’ve been using the “cornice cement 45” for some ceiling crack repairs and had mixed results. I mix it up thicker for the base coat and try to go thinner with it (more water) for the topcoat and I’m wondering if I should just use a base coat and top coat separately instead of the cornice cement? Have you had much success with ceiling crack repairs using cornice cement and fibreglass mesh? tape?

[@paintingbyjosh]

@@jjonescatch21 hi mate! I have been using the cornice as a base coat & top coat for years now and never really have a problem.

[@jjonescatch21]

@@paintingbyjosh too easy man yeah I’ve been having a go with it as a base and topping compound (the 45min) and seem to have issues trying to get a consistent mix before it goes hard. When mixing it up I think I’m not gettin a good consistency because I’m nervous about over mixing and causing it to go hard faster but then if it’s not mixed enough it’s clumpy and hard to spread out on the wall. I think I need more experience and keep trialing it out to get it perfect but the mix ratio and method seems hard to master without making it set too fast. I’ve been mixing it up in a mud pan in small amounts as I need (since I do small patches and repairs) then spreading from the pan instead of mixing separately in a bucket - maybe that’s where I’m going wrong since In the mud pan its hard to mix it up good. Thanks for the videos and experience man - appreciate wanting to help out and give tips because I’m a chippy by trade and really trying to get better at plastering/paint touch ups. Would love to work with you for a month! But I’m in Mackay QLD

[@swanydmello9334]

Well done mate your doing a great job I learnt a lot from your video 😎

[@paintingbyjosh]

Thank you 🙌 Appreciate you watching on. RESPECT

[@danielrichardson4577]

Legend mate, awesome video thanks for your work

[@paintingbyjosh]

@danielrichardson4577 much appreciated 👏

[@stevenjenkins5195]

Awesome tips thanks brother 🤙🏼

[@paintingbyjosh]

Thank you brother 🙏

[@ShoaibJaved-n1j]

Hi Mate, can i use fibafuse tape for cieling cracks...cracks run across the whole cieling

[@Sexyhotdoug]

Thanks Josh❤

[@milld9345]

Brilliant. Thanks very much.

[@paintingbyjosh]

Thank you for watching 🙌

[@garrysnan1210]

In the U.k we have gyproc joint cement. Best filler out and it’s ready mixed, can be heat gunned dry etc.

[@paintingbyjosh]

Very similar product. this is just powder form.

[@treemastura697]

Hey, can you paint directly over this once it’s been sanded? Thanks :)

[@paintingbyjosh]

Hey, thanks for watching. I would always put a primer over anything bare or patched first before top coats go on 👍🙌

[@treemastura697]

@@paintingbyjosh thanks 😊

[@BazzaThePainter]

cornice cement on rendered/bare brick walls, basecoat for gyprock?

[@mamapucha5365]

Hi Josh - can I use paper tape with Corner Cement? Cover thin hairline cracks without putting paper tape? To cover corner beads which are visible under the previous paint job? Thank u so much in advance & your videos are fantastic!

[@paintingbyjosh]

Hey, yes you can definitely just fill straight over know need for paper tape with hair line cracks. If there is lots of continuous movement I would recommend paper tape. Appreciate you watching on & the kind words 🙏

[@disl4007]

Hey mate I'm planning to make a few small decorative items (vases, pots using a mold ) , What kind of cement would be better for that? cornice cement or regular cement? Thanks in advance!

[@paintingbyjosh]

Hi mate, cornice cement would work im pretty sure. Sorry I can't help further cheers

[@jorisvanimhoff9722]

Hey Josh - can you use this stuff for cracked/missing patches plaster on brick wall aswell? i put a coat of boncrete on as well first. I actually bought a bucket of the gyprock multi purpose joint compound at bunnings is the cornice cement is better you reckon? especially for deeper cracks? or same same or different - Thanks Bud!

[@paintingbyjosh]

Hey mate, yes most definitely you can you this for cracks/holes in brickwork & the multi purpose compound is more of a top/skim coat the cornice/base cement is better for larger deeper holes & sets harder & quicker 👍 hope this helps cheers

[@jorisvanimhoff9722]

@@paintingbyjosh thanks for your reply! Now i know for next time.

[@jorisvanimhoff9722]

Actually i more wuestion since im in the middle of it - there was some dodgy crooked rendering done which has beed painted over just a lot of bumps and lines and some dips. Can i go and put some joint compound over it to flatten it out a bit? It seems to bind ok even w paint under it… im gonne put a good base and top over it anyway ofcouse? Is that ok?

[@paintingbyjosh]

@@jorisvanimhoff9722 yes that would be perfectly fine the filling compound usually have strong adhesion. Just before it sets hard you can shave it down flat with a blade less sanding then sets also 👍

[@tonygarvin5602]

Hi Josh do you sand walls prior to painting an existing wall with a pole sander before you paint? I'm guessing most painters do, and if you do I've heard some guys say that they don't brush the dust off or sugar soap afterwards they just let the dust mix with the paint ...cheers

[@paintingbyjosh]

Hi Tony, yes I always sand before & between coats. Most importantly is to dust down all surfaces prior to paint otherwise you will just create more work by having to sand more and you are definitely comprising adhesion by not dusting down💯 cheers for the message 👍

[@barankarpat3327]

❤thank you

[@paintingbyjosh]

@barankarpat3327 thank you for watching 🙌

[@7colliemac]

I found out about cornice cement accidental.. my only concern was it went of too quick in the bucket.. but awesome for filling base coat.

[@closertothetruth9209]

handy videos, ive used cornice cement just because i thought it probably has adhesive in it, do you reckon maybe the changes in your sense of smell make chocolate kinda taste a bit like vegemite, i was wondering if you wore a filter mask would your sense of taste improve, diesel ruined my sense of smell took ages for it to come back.

[@paintingbyjosh]

Yeah cornice cement is great for adhesion. That is so weird you mentioned that, how did you know? I always tell my wife some chocolate taste like Vegemite to me

[@closertothetruth9209]

@@paintingbyjosh remember when we have the flu everything tastes different, ive read that sense of smell effects how things taste, not saying thats the case for you but it was for me, took years to get it back, diesel is pretty harsh though.

[@Chris-op7yt]

hmm...going to cornice cement to fix cracks after house re-levelling. See how it stacks up against jointing compound. Pre-mixed would be nice. Fibreglass tape for taping.

[@seamuswarren]

I need to fill a finger sized gap where two ends of cornice/cove butt up against each other. I also need to apply maybe a thirty centimetre taper where the two sections of cornice meet to hide a glaring half centimetre difference in thickness where old and new cornice meet. The older segment seems thinner despite its equivalent ninety centimetre overall dimensions. I intend to apply a taper to the old segment building it up to meet the new segment. (The concrete ceiling itself is probably wonky as the apartment building presumably settled since construction in 1967.) As I have both plaster of paris and cornice cement on hand I am wondering what might be some pros and cons of mending cracked cornice with plaster of paris alone or adding in some cornice cement? Is cornice cement also known as "mud"? I saw a couple videos advise incorporating a premixed cornice cement (they called "mud") into plaster of paris to extend paris' set-up time. Minus the mud, plaster or paris quickly starts setting only minutes after reaching that ideal spreadable "frosting-like" texture. Quickly turns un-spreadable and irredeemable because I cannot water it down to extend it's "working life". This cornice cement / mud apparently extends the working life of plaster of paris when it is at the point of "frosting" texture" - not unlike the frosting we might thickly spread or butter on a sponge cake. :) I need to go back and find the videos describing the method and see if only the pre-mixed form of "mud" is acceptable. My cornice cement is in the dry powdered form and as it understand it, set-up time is less than a "mud" premix. Hoping to buy more time when applying plaster of paris, I tried watering it down. A total disaster. Adding water seems to create gravel and when it eventually sets and cures, a powdery mess like talc is the result. Has to be removed. Turns the site into a dust bowl.

[@tonygarvin5602]

Hi Josh need to patch heaps of small to medium size holes on the gyproc all through the house, after I’ve sanded it do I need to prime the cornice cement say with an all in one primer or can I paint straight over the top. Cheers yewl

[@paintingbyjosh]

Hi Tony, I always go over all patched surfaces with a primer/undercoat hope this helps legend 🤙

[@tonygarvin5602]

@@paintingbyjosh Thx mate love ya work

[@7colliemac]

I might add make sure you don’t leave sanding dust on the wall .. I broom it then use a damp lambs wool .. you will save yourself a lot of grief in the future.

[@paintingbyjosh]

@@tonygarvin5602 thanks legend 🙏

[@shoymagic]

Thanks

[@stevesilverton]

That's an angry wall, Josh

[@paintingbyjosh]

The termites had a good feed 💯

[@icmull]

This guy has seen some shit in those housos. Made him a good painter.

[@paintingbyjosh]

@@icmull 100 percent. Cheers legend 🙏

[@sydneyshinshi]

Havent seen a wall that bad for a while. Was that water damage ?

[@paintingbyjosh]

Yeah me either mate. This was eaten out by termites

[@lorenz681]

I was just about to ask if the United States had a similar product

[@Kwanglebeh]

Doing a job like this right now, probably in a worse state than this one (a 50s weatherboard) . The result of restumping and shonky plaster repairs.

[@beaupaterson9143]

chheers man

[@fanaticforager6610]

🍻 Josh, you’ve $aVed me Do$h😉🤙I can see how this game keeps yâ fit, that gear definitely doesn’t hang about, goes ÔFF Legit, 🍻again from the West 🦘Ür learned advice gave me less stress 🖖🐨

[@paintingbyjosh]

Haha thank you legend that's what I'm here for🙌 Sharing knowledge is success for us all & less stress 💯. Appreciate you watching 🤙