Pathway to PR after Studying a Trade Course

[@sleeper3535]

The best expression of pathway to PR! Thanks for that useful video...

[@JayteeG.Solomon]

Very informative, thanks !.

[@mindarelato2166]

Hi Nick....may i ask...how about hairdressing or beauty theraphy?is it also a pathway to PR ?thank you.

[@natalymunoz1163]

Is this the same process for cabinetmaker?

[@carzyscenctist]

Are there any plumbing course currently available atm for international students?

[@ばい菌-x8s]

6:00 Hi. After finishing the trade school and get a job to log that 1725 hours, am I able to change employers between? Am I understanding correctly? Like what if an employer fires me after a year? Thanks.

[@STEMabroad]

Hey nick, what if your 485 is already finished and someone is studying trade course with having spouse? Is tra accept full time work rights apart from 485. Thanks

[@Brarty55648]

Hello sir ,ielts 5.5 score is enough for taking admission in trade course ( motor mechnic)

[@roomieazahim1644]

ggood one

[@moyrarabelopriego8118]

and what about age... if you are more than 40 years I believe the inmmigration law won´t give you a visa in this pathway is this correct? thanks

[@Pathwaytoaus]

45 is the age cut off

[@Shalini_Mahesh]

Hi Nick, I got invited for 189 but mistakenly mentioned usual residency wrong. Am I able to get succeeded if I applied. Thanks

[@abdelkarimelkhabchi6565]

I have 3 years of work experience in sales representative (sony brand promoter) , which course that suits my profile. Im graduating from high school this year ( adult program)

[@skansbuildinglifting9997]

Hlo sir make a vdo on agricluture visa

[@ugochukwuachibiri38]

I am a concrete batching plant operator. Please which training or will I go that will qualified me to get a sponsor.

[@kiatipummpholkaew9894]

Thanks for the very useful information

[@routeaustralia7000]

After the course can we straight get into a 407 training visa? And gather work experience? Thanks I’ve almost watched 80% of your videos Really helpful

[@Pathwaytoaus]

You may be able to do a 407. But you would usually go to the 485 Temporary Graduate Work Visa

[@Lil_Monika]

How about a locksmith it's any pathway to PR after studying for international students?

[@Pathwaytoaus]

Very difficult unfortunately

[@JK-pz2gw]

Hello Nick If one gets excepted on a 494 Visa Does one need additional training or do you only need to work for one employer above a set salary for 3 years ??

[@Pathwaytoaus]

There is huge demand for early childhood teachers in Aus. You should look to see if you can pass a skill assessment first. Then if you can, potentially look at the employer sponsored or general skilled migration visas (depending on your age)

[@MetroSnailcatSK]

Is a 6 month Work Integrated Learning or Work Placement of Le Cordon Bleu equals Vocational Placement required for Provisional Skills Assessment?

[@Pathwaytoaus]

I cannot say for sure as I don't know the course, but it does sound a lot like vocational placement

[@hannahmclean409]

Hi Nick, if you meet the requirements for the skilled independent visa and it’s denied later on, can you apply again for another visa?

[@Pathwaytoaus]

Hi Hannah, so yes on the expression of interest you can apply for all 3 (189, 190 and 491). When you lodge an Expression of interest, if you are not selected, your visa is not denied or refused. You just don't receive an invite.

[@shakyarai]

Hi Nick, Very well explained. Would the pathway be the same for an international student wanting to study to be a Chef? Thank you

[@Pathwaytoaus]

Exactly the same pathway for Chef (it is classified as a trade in Aus)

[@shakyarai]

@@Pathwaytoaus Thank you very much

[@nickydecastro713]

Yes

[@nickydecastro713]

@@shakyarai how much it cost

[@nickydecastro713]

@@Pathwaytoaus yes I want Cookery

[@jordankenny8179]

Why has plumbing been taken off the courses we can do in Australia?

[@Pathwaytoaus]

Yes we no longer recommend plumbing as a course for international students. The licensing is difficult for plumbing

[@thiagomaximiano1834]

To get a skills assessment for electrician from TRA is also a paper based application or do I have to go to Australia for practical and theoretical exam? I’m from Brazil and have been working as electrician since 2010. I got an skills assessment from TRA in 2018 when I was living in Australia and it was all paper based, it expired and I was reading on their website and what I understood is that I would have to go to Australia to do some practical to get the skills assessment to apply for 491 or 190 visa.

[@Pathwaytoaus]

I believe you would need to start from the beginning

[@thiagomaximiano1834]

@@Pathwaytoaus yes, I do need to start from the beginning, but in 2018 when I got one it was only a paper based application, with payslips, letter from the employer, certificate and others documents, but I lost everything with the pandemic and now I think it changed and they included a practical and technical interview, even for offshore applicants.

[@rmsp2446]

Do I still meet the Australian study requirements if I finish Certificate 3 engineering fabrication (1 year) and Certificate 4 of Engineering (6 months)?

[@Pathwaytoaus]

That sounds like it is too short. How long are the courses registered for in CRICOS?

[@rmsp2446]

@@Pathwaytoaus I have no idea the reason why the Certificate 4 is 6 months only because the units in Certificate 3 already credited.

[@rmsp2446]

@@Pathwaytoaus Cert 3 is 62 weeks and cert 4 is 80 weeks in cricos but my coe for cert 4 is 6 months only because I will be granted some credits in Cert 4 once I finished my cert 3

[@jonsenjon2259]

i am in Melbourne and i am doing skilled course Cookery, my question is Do i need to work in my specific study field while studying? if yes will those "hours" be counted when i apply for TR or JRP? please reply.

[@Pathwaytoaus]

Hi, you would need to either do 360 hours of vocational placement OR paid work experience when you are studying in order to apply for the grad visa

[@irfanvlog6631]

Hi Nick, Is my consultant is PathwaytoAustralia. Specifically You Nick. My question is as I already use Visa 476 so I can't apply for 485 SO what other options are there for me I am doing Automotive from AIBT. THANKS ALOT

[@Pathwaytoaus]

Thanks mate, we can look at options for you, Feel free to give us an email on [e-mail] and we can check out what is available for you.

[@campfire2m901]

Hello ,I wish to go with your cookery course based in Tasmania in 2022,I just want to know age limit and ilets requirement its academic or general...??Thank you.

[@Pathwaytoaus]

Hi, nice to hear from you. There currently is no age limit for a student visa. And most colleges accept General IELTS (although certain colleges require Academic). If you give us an email on [e-mail] we will be able to run through any questions you may have.

[@campfire2m901]

@@Pathwaytoaus thank you so much for your valuable comments..🙂🙂

[@Ratheepan1122]

I have lived in Australia for 8 years but I had a refugee status which was failed. In 2019 I returned to Sri Lanka voluntarily. Now I wanted go back to Australia on student visa . My question is can I go back to Australia on student visa? Thank you

[@Pathwaytoaus]

Very unlikely. If you apply for a refugee visa, immigration would likely refuse the student visa due to genuine temporary entrant requirements.

[@edwinilac192]

Hello PTA, I wanted to ask if you didn’t take trade courses, are you still eligible to apply for Graduate Visa?

[@Pathwaytoaus]

Potentially. what course did you study?

[@learner7600]

Can i get any Trade Work visa after BBA Hons completed in late 2017 ?

[@Pathwaytoaus]

If you haven't studied or worked in a trade, it may be difficult

[@SagarKumar-im8fr]

Sir I have trade certificate one year Diesel mechanical. So how to i apply study visa by parthway

[@Pathwaytoaus]

You would first need to pick a course, then apply for a CoE and student visa. Feel free to give us an email on [e-mail]

[@kevinjunsibi6974]

How about Telecommunications? I'm about to study in Australia and my course is Telecommunications and network engineering. What are my chances for pr?

[@Pathwaytoaus]

Hi, where are you studying? It could have reasonable prospects

[@kevinjunsibi6974]

Abbey College Australia in Sydney. I'm just worried if I would get a job related to my course if I'll get the 485 visa. I've heard IT industry is very competitive in the country.

[@simbarashemakunzva873]

Hi. Thank you very much for such informative content. Are there practical skill assessment test centers in Southern Africa?

[@anjuodedara9069]

Hello, If i am already enrolled in masters of civil engineering course in perth Australia and if i find that course hard and i want to change the course than what are the options available for me. Can i choose any postgraduate diplomas or anything easy couse to stay there? Need help with it.

[@Pathwaytoaus]

Hi Anju, if you have done 6 months you may be able to request a release. You will then need to apply for a new visa.

[@ravichandel8690]

sir i have dont diploma in automobile engg how to apply for job and get work visa

[@Pathwaytoaus]

Hi, sorry I don't really understand the question

[@ਚੌਧਰੀ]

Hey nick ....can we do trade courses after graduation ???

[@Pathwaytoaus]

Yes I assume so

[@titojeem5598]

Can I study a trade course even if I work i n an office here in my country?

[@Pathwaytoaus]

Hi, yes it may be possible. Feel free to give us an email on [e-mail] and we can look at your options

[@Wealthymindset91]

Hi Nick! How big is the chance to get 491 as an Architectural draftsperson with Australian qualification? Regards

[@Pathwaytoaus]

Are you working in Aus or applying from offshore?

[@Wealthymindset91]

@@Pathwaytoaus working in regional Queensland for 6months after finishing Diploma

[@rinasto.domingo4030]

Hi good day ask something before I denied 2 times subclass 600 can I apply international student visa

[@Pathwaytoaus]

You can, but it may be difficult to meet the GTE for student

[@rinasto.domingo4030]

Thank you for the answer what I need to do to make a good GTE?

[@rinasto.domingo4030]

Can apply your agency a student visa thank

[@Emyointheworld]

I am confused. So how many years in total is it from applying for a study visa until I can apply for a PR?

[@Pathwaytoaus]

As soon as you meet the requirements for a skill assessment.

[@jovalsangcaan6719]

What is my pathway to permanent residency after completing master of environmental geospatial science in utas?

[@Pathwaytoaus]

Potentially

[@jovalsangcaan6719]

@@Pathwaytoaus . In what particular work am i landing if i finished my master?

[@ivartheboneless11]

I have 75 points in finance before considering AU…from what I understand i can get to 95 pts with 5 for 2yrs study + 5 for regional study, 5 for 1yr working, and then 5 for 190 nom; tips for stacking more with a masters or other type of education? Could i do some other course in demand without the work exp and get pr straight out of study with 90 points ? If so which one? I dont have work exp at all in my country only BAC in finance and i know financial related occup are not in demand in AU rn :(

[@Pathwaytoaus]

Hi, so the points is not necessarily that mark for the 190 or 491. I think that each state has different requirments and many applicants would have been invited to certain states with lower points, assuming they meet the requirements.

[@Kiran-khadka]

Is it easy to work from day 1 ..

[@Pathwaytoaus]

It can be. You might start of labouring and then build your skills up

[@rathiinuk]

hey nick i am from india..i did my graduation in B.SC ( PHYSICS.CHEMISTRY ,MATHEMATICS) from india .and duration was 2013-2016 but due to backlogs my degre got cleared in 2019 .and after that i pursued B.Ed Diploma in same field and it was from 2019-2021 and now i got my diploma ..Now i want to move to australia.so can you please suggest me which course will be better for me.PLS HELP ME

[@TRA]

plumber