How to fix a pull starter recoil spring and replace a stuck or limp pull cord

[@daP.A]

Please subscribe if this video has helped you. Please consider clicking on the THANKS button above to support this video/channel. Hi, I'm glad this video has helped many in taking out the frustration associated with this problem. Like you I searched for a simple solution and found none. Through trial and error, I finally figured out how to do it the easy way and wanted to share this to help anyone faced with the same problem. Helpful links: pull start cord: amzn.to/2YrneS6 amzn.to/2xfOOXb

[@SunOfNeteru13]

Can i use a pull chord off another mower thats in good shape i did that readjusted the spring and all and it still doesnt retract. I was cutting one day and just noticed the chord dragging on the grass when i was mowing smh

[@SunOfNeteru13]

And what are those white things called that u said when u spin it they come out the 2 cap things on spring i only got one of them and its not attaching right it just comes off.. Do they sell those

[@daP.A]

pawls, see pullstartrecoil.com/ for more info

[@daP.A]

yes, see pullstartrecoil.com/ for more info and resources

[@22aber51]

How do I know if the spring is shot. I can’t get the ends to align correctly...

[@SargeantKiller]

Hey, just wanted to say that I have watched dozens of videos on rewinding the pull cord spring. This one is absolutely the best one! Thanks!

[@daP.A]

Thank you

[@dieterpeeters7599]

after spending an hour and a lot of cursing trying to get the recoil in, this video helped do it in just 5 minutes. thanks!

[@daP.A]

Great, I appreciate your comment and super thanks. Glad this video helped you and you kept you sanity lol. Thank you for the support !!!

[@kisamekabuto1]

it’s been like half a month that I’ve been trying to find someone to fix my lawnmower the grass is so tall, when all I had to do was this. Thank you.

[@A.EYE.C.U]

Thank you

[@stevenpetty3747]

Thanks alot for be clear on all the moving prats and which way the spring goes you save me alot of head ache and time.

[@daP.A]

thank you, please consider subscribing for more videos.

[@stevenpetty3747]

@@daP.A I did thanks again

[@clubchatter1]

Spent 3 hours trying to fix my lawn mower found your video and fix the in 15 minutes thanks dude

[@daP.A]

That's how it works lol

[@getkonnectedhdtv816]

Just used your video to fix a lawn mower I purchased from OfferUp. Thanks

[@daP.A]

glad it helped. please consider subscribing.

[@xtinakent1491]

I'm convinced this is the only demonstration of this kind that is helpful. I had to reach a record high of watching what seems to be millions of videos searching for answers for weeks now and I just want to say you're a Godsend! I've went thru so many springs I've bought a long with the other parts needed and was about to throw in the towel and just buy a whole lawn mower and set this one on fire. Lord thank you for this man!!!!

[@alexk816]

Amen Sister 😊

[@daP.A]

Thank you

[@SteveFinfrock]

I tries several different methods to wind the spring , nothing worked until I tried it your way. Had the spring wound and the unit back together in about 5 minute. Counterclockwise helped a lot. Thank you!!

[@steeltiger5000]

I know you did this six years ago... but this crushed it! Thanks for putting this up.. I'd still be messing with that coil if it wasn't for you.

[@daP.A]

Thanks for the comment. This video has helped many people and will continue to do so years from now. Glad this helped you.

[@MrSandcrab1945]

Thank you for your excellent help. I took my Tecumseh recoil starter 20 miles to the local lawn mower shop and he said he could not get parts to repair it. I came home and ordered a spring but thought I would sit down and watch the video. My wife and I had it fixed and running in less than an hour. Changed the oil and mowed the lawn. Tecumseh 6.5 HP, 25 years and still runs like new!

[@tomnguni5964]

OK

[@stevemurray4122]

My craftman eagle 🦅 4.0 coming to the end it did its job .25 years

[@creationwt]

I had a broken rope and then the spring went everywhere. I found your video and followed your instructions. It worked. Got my lawn mower back up and running . Thanks for the great instruction and video. I give this video an A+ golden. Thanks again.

[@daP.A]

Thank you, subscribe for more videos

[@tcup7264]

I am so grateful that you posted this. It saved me money, time, effort and lots of frustration. Also thanks for using everyday language and complete explanations... while keeping it short, simple and effective.

[@nami08041988]

Lightweight is good and what did I use it for it’s a lawnmower kzbin.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

[@tomsavino1171]

Huge Help!!! Rented a log splitter - on the first pull the cord broke. After pulling off the recoiler and replacing the cord, the recoiler didn't work and I thought my work was done. Found your video and it saved me big-time. thanks for the simple instructions and great tips. 👏

[@daP.A]

Awesome to hear, glad it saved the day. Please consider subscribing for more videos.

[@colesherwood7919]

I spent 2 hrs trying to figure it out on my own and almost gave up, then I watched this video and it was exactly what I needed to fix it. Thanks!

[@daP.A]

glad you fixed it, please consider subscribing for more videos.

[@konvertink]

Holy moly! Thank you! I’ve been fooling with that spring for the better part of 2hrs now… after watching your video I got it first try. Just finished mowing my lawn. Won’t get yelled at my the wifey tonight!!

[@daP.A]

Lol nice

[@How-To-RC]

Hey man. Thank you so much for elaborating that fact that the spring hooks need to face the same way. There are a lot of videos out there on how to recoil the pull start but none of them mention the spring hooks being the same way around. Your a legend 😁🤜

[@daP.A]

lol thank you!!!

[@How-To-RC]

@Da P.A i couldn't figure out what i was doing wrong. now i may have the answer 😄

[@Original_J65]

I'm confused cuz it literally came from the factory facing opposite directions and was working. Briggs& Stratton

[@How-To-RC]

@@Original_J65 some pull start models could be different

[@SM_zzz]

Same problem here!

[@andyspinball]

I was just cutting my yard which was completely overgrown, and to be fair, I have not cleaned my mower deck very well over time so starting my Honda mower has become difficult. I was almost finished when the mower stalled again. This time when I went to pull the cord, it didn't start and the cord didn't recoil. This video makes the repair look fairly straightforward, like maybe even I could do it. So once it cools down (the mower and the 96 degree temperature outside) I will remove the pull cord assembly and will re-tension it as you showed. I was already frustrated with the heat, the mower breaking and the possible expense and time to have it repaired. Thank you so much for posting this!

[@daP.A]

You got this, it's simple just follow video and pause when you need to. Good luck

[@SpriteHide]

So I've only used this pressure washer one time. kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.

[@franzbibfeldt]

Some people know that it's important to have good audio in a video and to keep the camera steady and focused in order to show in detail exactly what must be done to complete a project. Most people don't have a clue. Da P.A, you are one of the good guys. Thanks for the video, three years later!

[@daP.A]

:) thank you, I know this video has helped so many and it continues to and I feel great about that.

[@ericferguson68]

My daughter's boyfriend took the pull starter apart after the cord broke. He just left the parts scattered around the carport. This was very helpful to get everything back together and working again.

[@chriswebster24]

I pray that your daughter has since parted ways with that gentleman, and that he was unable to father any offspring that share your genes. May your family tree and his never connect, and may none of your descendants ever be mutual. I ask that this blessing remains true, for as long as you both shall live, and for all the rest of your days, in this life, as well as in the next, until the end of time, and for all of eternity, forever and ever. Amen 🙏🏿

[@impeccablebuilds]

Hope she left him 😂 Could’ve at least left the parts/screws together and organized

[@GhostDad420]

He went knee deep in shit and realized he forgot his waders 🤣🤣🤣🤣 this comment made my day.

[@ripniklol7563]

Update?

[@GhostDad420]

@@ripniklol7563 this works no update needed. However the easiest way to do it can't remember if it's this video or not. Put gloves on so you sweaty hands don't lose grip of the coil. The out the inside end inside the chamber make sure the string is pulled to its tightness because when it recoils it will be loose if not. Once the coil is in the chamber use your gloves to spin it tight and into place. Hours of fucking with this made me learn the smart way not the easy way

[@briand.5321]

If you’re not one already but you’ll make a great teacher of any sort. Great video

[@rangerforge1514]

Thanks for this! Helped me fix the recoil starter on my son's Mini Bike. The inside loop of the spring had snapped off so I bent it back over, used your assembly steps, and good to go. He's back in action and excited to be riding again! Like others have said, saved me time, money, and frustration. Very well done tutorial.

[@daP.A]

Thanks for the kind words, glad you saved the day for your son.

[@exelexato11en11auto]

Really practical video pal without all the nails and paraphernalia other videos suggested. Helped me out a lot. My coil let go over the winter, but now my mower is up and running again thanks to you.

[@daP.A]

Thanks for leaving a comment. Glad you're all set. Please consider subscribing.

[@americanvikinggsd4631]

Ya know how/when you did it two ways and were about to do it a third way? But then this man goes ahead and shows you the third way and it works??!!! Thank you for this video sir. I was about to give it up!!

[@waywarddarkwolf8064]

Thanks a million dude! You just helped me fix my mower and saved me a tonne of time and cash by not having to take it to the repair shop.

[@daP.A]

Thanks for leaving a comment, please consider subscribing for more videos

[@ryanheatherington9636]

Thanks for showing me the easy way of recoiling that spring!!

[@SonicOasis]

Many other videos on YT on this subject made it seem hard to do and I was ready to give up. But I ran across this video this morning, watched it twice and went out and got the spring reinstalled in like 5 minutes. Thank you so much for saving me from having to consider taking mover to someone to fix for me.

[@daP.A]

glad it helped you.

[@rb51492]

Da P.A really

[@Eric-yc9kt]

Was on the verge of replacement at a repair shop till I found this video!!! A little rework of the badly unwound spring and i used this method, reassembled and it WORKED FLAWLESSLY!! THANK YOU!

[@justabouthadit5872]

THANK YOU for explaining the direction of the "V". I wasted two hours on a bunch of idiot's videos that were worthless in the end, you have the BEST and MOST helpful and also informative video on KZbin. You deserve a trophy or a gold star or something!!! Thanks!!!!!!

[@daP.A]

Pls subscribe thanks

[@ThatMontanaMom]

Thank you for posting this!!! Visual learner here with a rototiller that broke its recoil start. Different setup, but this taught me what I needed to do!

[@JoeMama-hd1fo]

After 3 hours, ten + KZbin videos, wrapping the spring around nails, using drills and killing my fingers it took me 5 minutes to get the spring in housing and get my mini motorcycle running with a new pull string. Thank you so much.

[@daP.A]

lol great to hear!!

[@Jorde-u4u]

Yoo hoo I bought a Lawnboy like in new condition at a pawn shop for 30 Dollars with the same problem. THANK YOU! 😂❤🙏

[@jhunterwrites]

My son ended up with a go kart. I used to work on dirt bikes, but minimal so I was at a loss for helping. He noticed the pull string wasn’t recoiling and before I knew it was happening I walked out to the shop and he had the whole thing taken apart! Together we put everything back together, realized the issue, realized which part needed to be fixed and replaced, all from this video thank you so much!

[@daP.A]

I love hearing stories like this. Am glad this helped you and that you and your son figured it out. Thanks for sharing. Don't forget to subscribe for more great videos.

[@thisemale]

Dude! All these videos show a zip tye. Thank you so much. Pretty much the exact same hardware with mine as yours. You made my day!

[@daP.A]

awesome!!

[@memyself1742]

You had the best video/instructions! We started out just trying to fix a broken string pull and reached that coil to access reinserting the string 'easier' ~ once that coil unfurled ... nightmare. The Vs going in the same direction you smartly emphasized. You were very step by step. Tape was a good trick. Wish we'd found you before we started! THANK YOU.

[@daP.A]

Thanks

[@IstvanSchreiner]

You are a lifesaver. I was on the verge of losing my mind when I came across this. 15 minutes and I was mowing the lawn. Thanks!

[@alanlondon9240]

Watched lots of videos which showed awkward methods of winding and clamping the spring. I tried and gave up on them on the Hayter lawnmower application. The method in this video just works and in ten minutes the recoil starter was working just as it should.

[@1220freddie]

This instruction was so clear and concise to understand. Thank you.

[@clarencedavis4517]

Thank you. I've already wasted hours w pliers, awls, winding and cursing. Appreciate your using plain English and simple explanation to achieve this task.

[@daP.A]

Np, thanks for leaving a comment

[@timbuckingham6114]

Awesome video! I just wish I would have viewed this one first. I spent about an hour before watching this... after watching... 15 minutes and the lawn mower was as good as gold! Thanks! Tim

[@nateburns5933]

Rock and roll! Boy I tinkered with this thing for over an hour and couldn't figure out it. The hooks facing the same way made all the difference. Thanks for the knowledge homie

[@daP.A]

@@nateburns5933 glad it helped you. Sub for more great videos

[@AlexGray]

Man, this video saved me. The spring part was pissing me off but finally got it to coil in and it was easy from there but thank you so much for posting this because I was literally about to take this crap to a shop. My advice for anyone else: don’t be rushed or in a bad mood when doing this because it will only make it worse 😂

[@daP.A]

Great comment, thanks

[@arvind2133]

My lawn mover’s cord got jammed hence I opened the cover and the recoil strip popped out and I could not figure how to put it back. I checked few videos on the KZbin and this video helped me put everything back together, the process shown in this video was easy and did not require any major tools. Thanks a lot.

[@daP.A]

Awesome

[@gido9467]

Thank you for this! I’m the exact opposite of a technical person, and this is probably the most complex thing I’ve ever fixed thanks to your video.

[@daP.A]

Congrats

[@sulaimanshahdurrani4087]

Bro i have no words to explain . . .THANK YOU SO MUCH . . .today i spent 8 hours on this freaking coil and your one video saved me . . .love from pakistan❤

[@daP.A]

Great to hear this helped you. Thanks for taking the time to comment.

[@elearning9873]

*Love how quite it is, New **Generater.Systems** maneuverable enough would be better with a little bigger wheel*

[@adamxxx5096]

My dad was trying to fix his lawnmower for hours. Sweat and cursewords were involved. After I watched your video, I was able to help him fix it. Dad has never before looked this happy to mow the lawn. 😁 Thanks a million!

[@daP.A]

Lol great comment

[@torbenkudsk9381]

After well over an hour of fiddling about with the mower, you find this video and 10 min. later you are ready and good to go. Thanks!

[@nomanmcshmoo8640]

I SOOO appreciate this video. I busted my recoil spring last weekend but was able to hand wind the mower enough times to get it started and finish the lawn. With the help of your video, I had the mower back up and running in 45 minutes today. THANK YOU!!!!!!

[@daP.A]

Awesome, thanks for the kind comment. Please subscribe for more videos.

[@jamesmahon838]

We have used the kzbin.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

[@daP.A]

Good luck

[@valerie362]

Thank you!! I figured out how to get everything apart but could not for the life of me get the spring back in. The gloves made all the difference in the world, that and finding out which way to get it back on. It looked like I had black gloves on this morning after messing with it for 20 mins lol! I appreciate you (and everyone who posts these) for sharing with us less mechanically inclined. I fixed the mower and everything my hubs broke.

[@daP.A]

Trust me I'm not that mechanical incline myself. Please subscribe for more videos.

[@Maxmemoz]

This guy is a genius. It worked

[@gerritvanandel4827]

Great video. Never really had to do something like this before so when I was trying to recoil the spring without any past experience, I was not finding success. Your video made quick sense of things. Thanks!

[@MrFatherstar]

Thanks. That spring is a pain especially if it pops out and I didn’t see how it went. I can start my lawnmower again 😀

[@Really658]

You're a lifesaver dude. First time I rewound the spring I put it on the wrong way and it twisted it all up.

[@SM_zzz]

I did the same 😬 I was only halfway through the video when I had the "ahaaa" moment! This guy is a legend for sharing this info.

[@LazarusLongification]

Exactly the information I needed.

[@derekkitchens7110]

I nearly lost it when I saw the coil fly out of my pressure washer. This video helped me put it back right and keep my sanity. Thanks!

[@daP.A]

Lol glad it worked out

[@hawaiidoves]

Thank you. Because of your video, I just got through fixing my pull cord, on my Briggs and Stratton lawnmower!

[@Ptcjr67]

Tried this out for a generator I have and it worked perfectly. You saved me $50 for replacement part. 👍🏻👍🏻

[@daP.A]

Great to hear, please subscribe for more videos

[@ianfinan8000]

This helped me so much, would of been lost without it help

[@DennisBonich]

Man without people like you i would have thrown my lawnmover in the garbage, but i fixed it and it works now, thank you 🙏🏻🙏🏻🙏🏻 God bless you

[@aristotletheskull]

This is what I needed to do the job, Thx a billion!!!

[@xpsraton1]

I had a problem with my machine and I watched your video and I learned a tips by yourself, thanks budy.

[@daP.A]

Awesome

[@carguy7878]

Perfect video Thanks a lot Thumbs up It was really simple Fixed my generator

[@dodgersfnshepard8673]

God bless you! Seriously. No other video has this type of set up. I have no idea what I'm doing and this saved me hours. My spring had little catches so it ripped my gloves and hurt my hand but this method was the only one that worked. Zip ties and drill with nail failed epically and about smashed my face twice. Thanks

[@daP.A]

So glad this helped you. God bless

[@camilollanos4814]

Thank you from FLORIDA! !

[@keving.4020]

Good little tip on the grease. Little things like that are a difference maker. Its a very worked part. Wipe out all the old crap and gunk with paper towels before applying fresh. 3 in 1 works too

[@6UERRA_DIRTYBIRD]

I forgotten to do this... Thanks for the video - Helped out

[@VenatioExVox]

This video was an absolute lifesaver. Stuff like this is the only way I manage the occasional DIY task.

[@daP.A]

Glad it helped you, please consider subscribing for more videos.

[@mikeprice7124]

Thanks buddy!

[@michaeloxman3820]

I went to replace the pull cord only to find the spring wasn't catching. Thanks very much for saving me a trip to the repair shop!

[@daP.A]

Np, please consider subscribing for more videos.

[@riboflavinz]

I love how straight to the point this video is. Great job

[@arrrseeingeye]

Don't forget your safety glasses while working with springs. 🙈

[@paultucker9753]

my pull cord had jumped out of the track and wrapped around the spring. I took the cover off and when I removed the cotter pin "zziiiing" the whole thing flew apart! I knew I'd just have to buy a new mower but this video saved me! I got it put back together and running... I'd click 'like' on this one twice if I could! THANKS!!

[@daP.A]

@@paultucker9753 thank you, pleased consider subscribing for more videos

[@paultucker9753]

@@daP.A done!

[@2jzking124]

152 dislike, 152 stupid people. Video is awesome 👏

[@daP.A]

Lol thanks

[@ryanmuenchow307]

164 dislike, 164 stupid people

[@Benno828282]

Thanks, put it around the wrong way first time as i thought my mower was different.. went anti clockwise and worked like a charm 😊

[@duanegrice7561]

Hello Sir. Thank you so much for this video. I was about to spend $30 on amazon for a new recoil spring and housing and watched your video and fixed my old one. I appreciate it!!

[@daP.A]

Glad I could save you money

[@terrybartlett5539]

Thank you. This was as easy as you said it would be. In fact it was easier because the spring wasn’t damaged. When I released the spring and the cord zip in I thought wow. It took longer to reassemble the cover etc... than preform the fix. Thanks again.

[@daP.A]

Terry Bartlett your welcome, enjoy our day

[@Shaymuhs]

Thank you so much!!!!!! I couldn’t find a tutorial on winding up and replacing a popped out pulley spring and your instructions were exactly what I needed. Huge respects.

[@daP.A]

Glad it helped, please consider subscribing. Tha is for your comment

[@seedtosalvation9636]

Excellent video sir. Was about to buy a new starter assembly at a cost of $100.00 in Canada. Your video showed that when my spring unwound itself, the hook at the centre had bent out of shape, and I couldn't figure out how it catches. Rebent it the way you showed, and good to go. Thank you for sharing. By the way, if I may add to your video, the extra rope in the centre that was left over will go away when you pull the starter cord all the way out. No need to reknot the loose end

[@simontempler3239]

Great video the only one that gets straight to the point about what I was tying to repair.....Thanks

[@eddyd8745]

Thanks for talking the time to post this, helped me out in the back garden in the UK today!

[@IronEchoDesign]

Thank you for this! "I'm going to show you the easy way." So true. The other videos over complicated things. I fixed my starter because of you and the the way you boiled down how the damn spring works. Simple. Perfect. Thanks again.

[@daP.A]

Thanks for the comment, glad you got it fixed. Check out t hff e channel for more videos and please consider subscribing.

[@masongreen3331]

Thanks bro.. You just done what has taken me all day in less than 5 minutes.. But hey thats what KZbin is really for. To make ppls life easier

[@daP.A]

Indeed, like you the same happened to me until I figured it out and wanted to share it.

[@stellausen913]

Words can’t express how grateful I am to you for this video!i got frustrated trying to recoil my gen n not getting it right countless times...I went on KZbin n saw this video n voila recoiling made easy!thank you thank you thank you!

[@daP.A]

Thank you for your comment I love hearing comments like this I'm glad it helped you have a great day. Check out my channel And subscribe for more videos

[@Si_Jones]

Cheers mate! The tip of checking the "V's" on the recoil spring was just what I needed - couldn't get it to locate and wind up properly, the inner one was bent completely the wrong way. Sorted in 5 mins after watching this. Downside is now I don't have an excuse not to cut the grass!

[@daP.A]

Glad your up and running

[@MrFlashdon]

thank you thank you thank you....my rope broke and I replace it but I had no idea what else was wrong until I found your video. I buy a drink if I could . Again Thank you

[@daP.A]

LOL... I'll take that drink, glad it helped you!!!

[@Gejdbaksidnd]

Thanks a ton for the tutorial man! FYI to anyone watching this video, don't forget the most important step in this process. Make sure the two "v" ends of the spring are facing the same way, it's super important as he points out.

[@daP.A]

Thanks for taking the time to leave a comment. Am glad this helped you. Please consider subscribing for more great videos.

[@1BOSSman760]

mine was not facing the same way from the factory

[@Gejdbaksidnd]

@@1BOSSman760 neither was mine. But trust me, give it a try, and it should work anyways. Idk why, but it does 🤷

[@1BOSSman760]

@@Gejdbaksidnd i spend alot of time altering the coil so that the v's are facing the same way when they originally dont and i seen another video where the v's were like mine and they did not do this. but it did infact work but it took more time. I dont understand why it says in the video that it will NOT work if the v's are not the same way when in fact they dont come facing the same way

[@Gejdbaksidnd]

@@1BOSSman760 yeah it was a bit confusing. Either way, glad we both got it fixed.

[@Bhampton444413]

I was about to go nuts trying to get that spring back in. Watched other videos but yours is by far the best. Took me 2 minutes using your method. Thank you!

[@daP.A]

Awesome

[@kaydavies762]

Really helpful tutorial, key info re both hooks pointing same way to the left,also counter clockwise to thread new rope. Followed all advice, hey presto, the lawn mower started, really chuffed as we say in the uk,never done this before .Thankyou sir.😁👍

[@daP.A]

No problem, please consider subscribing for more videos.

[@DGSantaFe]

Thanks very much, brother 🙏 I was able to retract it on my land mower, I was going crazy trying 2 figure this out cz I replaced the cord, and it wouldn't retract. Then I saw your video n job well done so thanks again. Be blessed 🙌

[@daP.A]

@@DGSantaFe thank you !

[@jasonminor6891]

This was an amazing video to find. 100% helped me fix my lawn mower. All I had to do was recoil my spring!!! Perfect video. Thank you so much.

[@daP.A]

Please consider subscribing for more videos

[@rachelstumpf5416]

Thank you so much! Literally saved my sanity and push mower from going to the dump!

[@mikew3944]

Great video mate,after watching this I fixed the mower that had sat for a year with a broken spring and pull cord. New petrol,top up oil and a plug rub and it started. Cheers

[@SM_zzz]

I'm embarrassed to say I'm a qualified mechanic and I needed to find a video to help me out...😬 I attempted to repair it and it just didn't work, I knew I was making a mistake somewhere because it wouldn't tension for me.. you saying that the v's need to be the same direction did the trick! Every day is a school day ;) Thanks man, and greetings from Ireland 👊🏻

[@daP.A]

It happens to everyone not just you, no one knows everything about everything. You life and learn. Thanks for the comment please consider subscribing.

[@SM_zzz]

@@daP.A I humbly agree with you! And you have a new subscriber. Thanks again for taking the time to make the video, huge help! The lawn is now finished 👌🏻

[@jp7621]

With as much as I struggled with this last night before watching your video I thought there was no way the spring would cooperate. Tried your method today and had my lawn mower up and running in 5 mins. Thanks!

[@daP.A]

jp7620 great to hear I'm glad this video took some frustrating out of fixing this problem. I made the video after struggling with it for hours myself until I figured it out.

[@teedubya5772]

After watching your video I fixed my sons minibike. It was the same exact problem you just showed on this video. I fixed it and wound it up just like you said and it’s back up and running. Thanks a ton man!

[@daP.A]

awesome, hope the little guy is riding again

[@M77GAMING]

One of the best tutorials I've seen, thank you!