I tried the RG Zeta Gundam as my FIRST Real Grade Gunpla!

[@mrpiston6177]

Now paul, go to the other side of the spectrum, Build the Rg-Hi-Nu gundam

[@SimonGreen85]

Or the God. The flexibility of that one is effing nuts!

[@KONO_MOTO]

How does the hi nu compare to the rg nu Gundam? Put that kit together a year ago and it's in great shape. Our kids even play with it regularly and it's held up to that. Articulations are near perfection.

[@d1pstick32]

@@KONO_MOTO Hi Nu is leagues better. Once it's in a pose it's SOLID and you don't need to worry about the funnels falling out.

[@jaderabbit898]

@@d1pstick32Just be sure to get an action base/stand for it.

[@d1pstick32]

@jaderabbit898 my Hi-Nu has been free standing for months. You can sue the propellant tanks to lean it a little.

[@Mosaic117]

Him transforming it is like watching a hippo performing brain surgery with a sledgehammer

[@memeboy8207]

Or an orc repairing a stompa

How does it hold on to the sledgehammer

[@Mosaic117]

With its telekinesis (duh)

[@MasterSwo-MK]

@@Mosaic117 With such a small head?! Must be uncomfortable.

[@Celtic1020]

To be fair, IT SHOULDN'T BE BRAIN SURGERY!

[@pandavikingguy6193]

Love how he is so calm and british. Like "oh thats interesting". Meanwhile I would be freaking out.

[@Kroeghe]

I imagine a scene from a movie, where the bad guys, as is tradition, stand back and allow the hero to transform, but it's taking longer than usual and the robot gets stuck in one of the in-between stages, metal screeching and straining, some oarts fall off, coolant is leaking... "Guys, I know we're not supposed to interrupt, but should we, like, help?"

[@MasterSwo-MK]

"I... don't think we can. OH GOD! Is that even MEANT to bend that way?!"

[@ejo1996]

i can almost guarantee that this has happened in a super sentai series at some point

[@MrFraknak]

This would make an hilarious stop motion.

[@Rikarikun]

Fun meta lore fact for anyone that might not know: The RG zeta is basically the delta gundam prior to being split off into the zeta gundam project, in disguise, weirdly enough.

[@airsir9559]

Sounds like a Robot Chicken sketch.

[@eikixia]

and meanwhile the Master Grade Ver. Ka version of this kit is one of the most amazing thing ever!

[@gamerkingdom1442]

I’ve built it recently. Haven’t transformed it yet, but it’s an amazing MG!!

[@raccrown]

Its transformation isn't great. It's not awful, just not a good time. The ZZ Ver.Ka is much better in that regard.

[@mihd9874]

Makes sense The Zeta inherently has a complicated transformatiom in all of its kit( minus the parts forming ones)

[@rollingvice]

​@@raccrownkinda disagree. but i get it. zz is a bigger kit after all

[@raccrown]

@@rollingvice The wings are a nightmare. The tabs are on a ball joint-and to be fair, they would snap immediately if they weren't-but it's still a nightmare. The skirts always fall off when I try to flip them around. The gun does not stay put. The ZZ has far fewer issues, predominantly the legs not staying tabbed into the backpack, and the gun not staying tabbed in, but they're far less significant.

[@Miphnificent]

You were warned. It's not *that* bad, and most people don't really address the main issue in that if you transform it repeatedly as well it begins to fall apart rapidly. Typically if you build it you keep it in one mode and never change it again afterwards.

[@arx3516]

Wich is lore accurate!

[@omnom277]

@@arx3516 No it isn't? Kamille goes back and forth every single fight in the Zeta

[@jrmarcus]

I mean...yeah, maybe it's not as bad as people say, but it's not a lot of fun to build either.

[@MasterSwo-MK]

@@jrmarcus Plus, I REALLY don't approve of how wobbly the wings in MS mode are.

[@Celtic1020]

Which is stupid because the whole point of a transforming MS is to transform it.

[@LordCrate-du8zm]

We warned you Paul... Now you must suffer the consequences. On a happier note, it's only uphill from here my dude.

[@First-Name_Last-Name]

The road to gunpla is paved with broken parts and loose polycaps There will be light at the end of the gunpla tunnel my friend.

[@Keryaken133]

@@First-Name_Last-Name and glue, like.... lots of glue.

[@MasterSwo-MK]

@@Keryaken133 Not to mention paint, pla-plate, LEDS and the like if you want to get REEEEEEEAAAAAAALLLLLLLY into it.

[@RedCheckJ]

unless he builds the RG RX-78-2

[@MasterSwo-MK]

@@RedCheckJ Which one?

[@Jake96000]

On god we’re gonna get you a hi-nu

The RG is divine. The supermodel of mobile suits

[@tntkaboomsky7427]

the Nu itself also a stellar model kit minus the fin funnel but man does that also blows the Zeta out of the water

[@RocKM001]

Definitely build the Zeta Ver Ka! :D You can compare how much the model has improved since the RG days! Also... ah yes the model impulse buying of more kits. You now are truly getting deep into Gunpla =P

[@GTSW1FT]

Wait it's the Ver ka improved over the regular one?

[@RocKM001]

@@GTSW1FT Yes. MG Zeta Ver Ka is the latest MG release and its basically fixed everything and then some. Folks have said it's practically peak for a kit right now

[@GTSW1FT]

@@RocKM001 nice, then I might get one as my first Master Grade kit.

[@RocKM001]

@GTSW1FT Just be aware its a Ver Ka kit they are meant to be more "advanced" MG kits (and have a crapton of water slide decals coz Katoki loves decals xD) they are a treat to build though just a bit more time consuming than the average MG

[@GarethXL]

nah he still haven't reach the peak of being a plamo builder having an endlessly increasing backlog sitting in the corner (stares at my megami device backlog)

[@EdmondCleary]

You're really going to enjoy that RG Epyon. Beautiful model and so different from the early kits.

[@vahlok1426]

I'm currently building it myself, and man is it cool as hell. Can't wait to get it in a sick pose with Wing Zero RG.

[@SomeRandomJackAss]

If I'm not mistaken, it's both post frame update and transforms so it should be the exact opposite of the RG Zeta.

[@4lderesque]

My man showed absolute loyalty to his name.

[@victorcartagena8524]

Painting war hammer wasn't enough, you just had to build satan in gunpla form... i'm sorry you had to go through such an experience and all the pain you must've suffer.

[@First-Name_Last-Name]

"Satan in Gunpla form" got me chuckling. I wish someone will do a custom of a satan-themed, battle damaged build, from a broken RG Zeta kit, purely built out of spite and salt.

[@FireHeartLeon]

I can only imagine how he handles the RG Sinanju...

[@thelonelystankmuncher8879]

​@@First-Name_Last-Name there is kitbashing although I wouldn't do it on an RG Gundam

[@muhamadariefrahmanhakim9166]

RG Sinanju : Allow me to introduce myself to you

[@GojiraFan-in9oo]

5:35 the Zeta's alt mode is called the "Wave Rider" mode

[@Ultima_Atulos_Maxim]

If you go to build any of the Iron-Blooded Orphan HGs, it is recommended to coat the ball joints in a bit of clear coat or super glue and let them dry/fully cure before assembly. For whatever reason, those kits seem to universally suffer from loose joints, kind of like the skirt armor pieces that kept falling off on your RG Zeta Gundam there. My first kit was the HG Rouei from IBO, and it also suffered from these issues. After adding a bit of clear nail polish to the joints, it now holds poses a lot better and stays together a lot easier.

[@FFX7corefighter]

now you should get the real grade HI NU gundam trust me its phenominol

[@jessekarimoen9858]

I can’t stress this enough

[@boredmagala5701]

Very good kit

[@wolfbrother9025]

Got the RG Sazabi and omg it's bigger than my MG God Gundam and that's without its head even on lol

[@geist33w]

One of the best kits I’ve built, the standard Nu is also very good

[@ryanprime381]

Probably any of the newer RGs like the impulse Nu Hi Nu RG Sazabi or God gundam would be a good idea.

[@muffintosay5125]

Most gunpla builders only build gunpla or other kit like gunpla and thus only have gunpla as a frame of refrence. Thus kits like the rg Zeta and Tristan while not being bad kits are seen as bad gunpla. Bandai has just made pepole expect the best in model kit engenering so its odd when a kit comes out and dose not live up to what pepole are used to.

[@sate2801]

yeah pretty much this I started off build gunplas and only realize glues are generally a must for most model kits after i start dabbling in non gunpla kits

[@nutthings4017]

RG Zeta sure, it get a pass since Bandai was feelin ambitious despite not having the know-how at that moment, but to actually thinks Tristan wasn't a bad kit is straight up braindead cope.

[@MasterSwo-MK]

@@sate2801 Have you considered Moderoids? Quality in both build and stability is about the same. But it comes with the bonus of some of the parts being pre-painted(Mostly the faces and really small apps stickers could never manage), and a wider range of I.Ps to choose from. Patlabour, Granzort, Rayearth, Getter Robo, and recently SSSS Gridman and Cross Ange. They even have more obscure entries like Megaton Musashi ,Banished from Paradise and Brain Powered. Only downside is that reprints are fewer then Gunpla and the price is expectedly higher, but they're more often then not well worth it. If your looking to turn your Gunpla collection into a Super Robot Wars collection, then Good Smile Companies Moderoids will fill any gaps Bandais HGs(and two RGs in the case of GaoGaiGar) haven't.

[@willisjackson7029]

@@sate2801 Glue is a must have for Gunpla if you want to remove the seam lines and make the outer armor look more natural and complete. I use Tamiya Extra Thin Cement (the one with the darker green lid) to weld the plastic together and then after it’s dry I sand it down to make it look like a complete piece. Then I will paint my model. Happy building.😊

[@peger]

You should try some chinese models. Some brands will smoke bandai alive

[@EbullientSMP]

RG Zeta is general just a kit you get for the looks and never touch. It's something that can serve well if you go into it expecting what you did, but know its limits. If you want to check out a transforming RG that shows how far tech has gone, I 100% recommend the RG Impulse Gundam. The transformation isn't as flashy, but it's super solid and an excellent example of how far RGs have come.

[@vahlok1426]

RG Epyon also transforms into a cool two headed dragon mobile armor mode, and it's also super cool. It helps it's only about a year old or so, too so it's part of the modern "mini master grade" style of RGs.

[@songlessnightingale]

Considering it also has 3 distinct variants, sadly the other two are Pbandai, it won me over when I built the Sword Impulse, and I wasn't even a fan of the suit. I'll admit, I'd say the one true flaw of it is the V-fin, it's so fragile, mines broke off on the right side, but the one on my Destiny Impulse is still good so far.

[@HypercaffinatedBees]

If you want a modern real-grade kit that still has a transformation gimmick, definitely consider getting a unicorn (there's like 10 different variations but they're all basically the same, just pick the one you like most). I got a RG unicorn as my first kit (before I even had proper nippers) and it went together super easy.

[@anthonymartinez8607]

Just make sure youre careful when building the arms. I didn't have an issue but a lot of people in the community have snapped the arms.

[@gaeboi8182]

​@@anthonymartinez8607 lube up the biceps and shoulder joints

[@roneherushin4638]

Both me and my cousin have snapped the arms on ours.. his twice when he bought another copy to try and finish his first one.

[@Morrowinder777]

Put the image with the "this will rotate, this will break" chart, that's important.

[@jrmarcus]

Just my opinion, but Macross has great flight forms and kind of ugly mecha forms while Gundam has great mecha forms and ugly flight forms. The transforming Gundams tend to be my least favorite.

[@GojiraFan-in9oo]

In terms of Real Grades, ANYTHING that comes after the Tallgeese and the Unicorn is awesome But be careful because some of them have keyhole joints that in my experience have gotten loose very quickly Like the RG God Gundam and the RG Crossbone Gundam

[@prometheus1815]

RG Mk II would like to know your location.

[@LoliconSamalik]

You're gonna have to specify which unicorn, cuz there's the normal one and the full armored version

[@GojiraFan-in9oo]

@@LoliconSamalik there's several of them, and they are virtually the same so it doesn't matter anyway ofc i mean the standard Unicorn

[@LoliconSamalik]

@@GojiraFan-in9oo Oh... I was under the impression that full armor did away with the premolded inner frame. My bad.

[@ShinKatto]

Or maybe it’s more that that despite a kit having flaws, RG kits across the board are cool and just need different levels of care

[@optiondezzo]

i have over 20 years of model kit experience and i built my first gunpla after a 20 + years hiatus (my first kit was the f-90 L-Type back in the late 90s) . i chose the much famed RG Sazabi as the kit to get back into the genre with. it is a brilliant kit. however, it is also somewhat complex and delicate and one might accidently break some parts during the assembly or cleaning process. i used water slide decals which is a good choice but the zeon icon on the shield is extremely difficult to place dead center. as a matter of fact, i tore the waterslide one and had to use the sticker decal (which still wasn't dead center lol). i also stupidly used tamiya enamel based panel liner fluid before giving all the parts a topcoat (aka varnish) which is a NO as the enamel can eat through a mould joint and split the part open. this only happens because the factory is rushing the casting process and might not have used enough heat so the plastics join together properly.

[@MaddJakd]

I totally accidentally stumbled onto gunpla ages ago... and fell in love instantly. Having the web as a resource is nice, but it's one of those things where I find it's best to just use for release schedules more than anything.

[@S_047]

Same. The twitch community that got me into it is very welcoming and glad to help. Did 4 entry grades and just finished my second High Grade today. . . . I have about 5 more ordered. . . .I really dove into this didn't I?

[@spyroclone152]

In terms of Real Grade horror stories, my first actual real grade that I built was the RG Crossbone Gundam (The smallest Gundam in the known UC timeline). It looked really cool since it's sort of pirate based, and came with many accessories that interested me such as a cloak, and beam shields. I uh ... was a little too ambitious. Some of the parts are so microscopic, that I had to use tweezers to put them in place. Many hours were sacrificed, and many bullets were sweated in the process if finding these pieces that managed to disappear in the infinite void that is my carpet. Taught me the importance of a neat building space. Another traumatic gunpla building experience was when I built the RG Sazabi. One of the best real grades around for sure. But I mistakenly snapped a peg because I tried to rotate a joint that wasn't meant to be rotated. (Use baby oil to loosen up the pre-molded joints if you feel it's too stiff.) Thankfully, I somehow managed to get a free replacement from Amazon prime. I've disciplined myself to build more kits until I feel like I've gained enough experience and technique to build the Sazabi properly. I see that you bought yourself the true GOATED Master Grade Zeta Gundam Ver. Ka. Just know that that model truly does transform, no parts forming required, and also comes with the superior water slide decals instead of stickers.

[@nicodalusong149]

The Victory is 0.7 meters shorter than the Crossbones/F97s. It stands at 15.2 m compared to the Crossbone series which stand at 15.9 m.

[@spyroclone152]

@@nicodalusong149 You learn something new every day. Thank you. Kit will be on my radar ... eventually.

[@nicodalusong149]

@@spyroclone152 Well, that was the shortest Gundam specifically. But the actual shortest MS is the RGM-122 Javelin which stands at 14.5 m.

[@megatron8449]

The crossbone was my first RG... it exploded.

[@tyrant1178]

The RG Epyon has basically redefined the transformation process. Probably the best looking RG transforming kit out ATM... In my opinion. Very straight forward and the detail is perfect.

[@lustreaux]

this man knew the legacy of the RG zeta and bought one anyways. i love him

[@zafranorbian757]

Yes Hurra for Zeta Ver. Ka If you want another modern RG than the Hi-Nu gundam really is the way to go. Though the Zeong and Sazabi are also great.

[@intemptesta]

Thanks for the video! I really enjoyed watching your RG Zeta little adventure. As someone who also owns the kit, I can say its transformation is so unforgiving. I've got to be millimeter precise otherwise the parts don't fit well all over and end up all shaky. One wrong twist and it can break, just like what happened to you. But I'm relieved you're planning to keep it in Mobile Armor mode right from the start and didn't lose heart. Once I get the transformation right, it feels really sturdy-so much I'd never try to change it back again. Despite all that, this Zeta look undoubtly amazing with mechanical detail all over it.

[@Arassar]

Man I am so psyched for the new Real Grade RX-78-2 that's coming out later this year

[@lukemiller1575]

It’s pretty continent that I bought this model for $15 and I get recommended this video the second I open KZbin

[@grip3939]

**smacks the table** we warned him **smacks the table again** , oh well

[@rotundrake]

Oh man, I was just working on this last night and I do understand the frustration. It's fiddly compromise of a kit. I'm two thirds into it and I know I will never transform mine. I completely agree with your review and I believe anything will be a better choice after this. Especially the RG Hi-Nu, literal night and day! Happy building!

[@howardmoon2687]

You chose two excellent kits. The Epyon is one of my favorite builds. The MG Barbatos is one I would highly highly suggest building.

[@kred159]

Glad you "enjoyed" the experience. Honestly trying something you know is rough just for the experience isn't always bad. If i could recommend some Real Grade kits, either go for the Nu/Hi Nu gundam or the Wing gundam. Both Nu and Hi Nu are freat for possability and build strength. Hi Nu is a bit better but just pick whichever you like more. Wing is a relatively newer RG kit that also has a transformation gimmick. Just make sure you get the newer one and not the one with EW in the name. The EW version doesn't transform.

[@choochoodino5200]

seeing as you are going down the RG line. I'd recommend the Gundam Unicorn (bring your WD-40 for the joints) or for the king of Gunpla, The RG Hi-Nu Gundam.

[@computersocsci]

Great music choices for the transformation haha

[@jiufeng8454]

For a better experience with real grades. I suggest you try the RG Gundam Epyon. I just finished my own, and its amazing. its one of the more modern Real Grades, so its great. It transforms into a 2 headed dragon. Its dope.

[@bikzimusmaximus5250]

Hello it is I, the evil goblin that lives inside the heart of every model builder. You should build the RG Zeta again, surely this time your experience will make it much more manageable. Anyway the MG F91 2.0 is a really cool kit and I hope you build that one. The MG Hyaki Shiki 2.0 is also great, and I love the MGSD Barbatos as well. Other than that I would recommend checking out some Kotobukia kits like the HexaGear stuff or their Nacchin Tanks. I have a lot of friends that are also really ride or die for the Wave Votoms kits like the Wave Scopedog. I also think the HG Gerbera Tetra is a really cool looking kit, especially if you paint it.

[@chromiiayt3044]

I've built both the RG Epyon & MG Zeta Ver. Ka. Both are excellent builds!

[@shiranui498]

Wow, you picked a Ver.Ka, can't wait for your take, if you ever do plan on reviewing it for the channel.

[@FriX2O]

had RG destiny as my very first gunpla because I absolutely love Destiny, it taught me to watch reviews first before buying a certain model because if I bought them blindly, I might stumble upon an absolute hand grenade that I wish ive never had in the collection.

[@catnip202xch.]

I watched the reviews, still got the RG Justice. Still blame myself for buying it even though I was fully aware of the issues

[@joshuahensley9395]

im building the new ver ka zeta rn, such a masterpiece of engineering seeing this at the end, i think your going to be really impressed with the newer zeta, and the epyon is supposed to be an awesome kit as well

[@justagundam]

The RG Impulse Gundam is a good replacement. As for bad gunpla, The HG Gundam Tristan. It feels like a kit from 2001 made in 2017

[@aeylonadelacruz6710]

Maybe buy Freedom or Epyon or Hi-Nu or Unicorn dudes. It's fun and i am still saving for them. Yeah have a good building! Also subscribed now!

[@user-qg4st8ih1d]

Supposedly the Real Grade Unicorn is supposed to be pretty great, and it has a transformation that actually works (although it’s from Gundam to slightly-fancier Gundam, rather than into a spacecraft) quite well.

[@rockatrion]

You always break your first RG... ALWAYS, nice vid

[@Raelhorn]

While there are many Gunpla kits I've built... the RG Zeta is one I haven't, largely because of its reputation. As time goes on, it seems the legend persists., though most transforming Zeta kits (nearly all of them) are fairly notorious; the RG just has the added problem of being small and spindly. The Ver. Ka. is the latest iterations, and largely considered to be the best Zeta kit. Speaking of which, the MG Zeta Ver. Ka. and RG Epyon are both great modern kits. Both can transform as well... though the Epyon's transformation is definitely not as intricate as any of the Zeta kits. A couple of quick tips on the RG Epyon - (1) do put stickers *under* the clear green , makes them pop more with the reflective surface under them and (2) do *not* put stickers over the eyes. There's a decent light-piping system in the head (glows when there's a light behind the head). A bit of a sideline, the "Ver. Ka." line of Master Grades have leaned towards being more "challenging" builds technically (often pushing the limit of the technology for the time), though the last several years have been rock-solid kits. Older ones can be... finicky. After those... well, I would recommend getting yourself a proper *chonker* of a kit. And I have a few suggestions (from estimated cheapest to most expensive): * MG Sazabi Ver. Ka. - A bit of an older kit (2013-ish), but a legendary one; also a very non-Gundam design, so it's a change of pace. Nearly a foot tall (just a hair shorter than Perfect Grade kits), opening hatches galore, and I think close to a full pound of plastic once assembled. The RG Sazabi is another great kit, though a fair bit small due to the different scale. * HG Destroy Gundam - A very new kit, haven't built it myself... but it's probably the biggest "full release" kit that isn't from the "Mega Size" line or the below recommendations. For reference, ballpark price puts as comparable to a knight from Warhammer 40k... but it dwarfs any knight. * MG Ex-S Gundam or MG Deep Striker - Both kits have the same base/core, and they're among the biggest MG kits; the "Deep Striker" being the bigger of the two with a ridiculously long cannon. Both come with a stand... and are built on the stand, because they can't stand on their own feet (the Deep Striker doesn't even have feet). Special note for the Ex-S, as it can transform as well. * Perfect Grade Kits - 1/60 scale, so they're all roughly a foot or so tall... but also incredibly detailed kits with a lot going on. Also fully articulated hands (though that goes for most of these). Releases are also very infrequent, so many of the kits can be rather old; modern ones are also quite pricy. Still, they're quite the undertaking and take far longer to build just due to the sheer volume of parts involved; I feel it's a bit early at this point, but likely needs to be mentioned. Either way, keep going and have fun!

[@Pie___]

I highly recommend the RG God Gundam! It was my first real grade and I'm a really big fan of it because of it has both amazing articulation and posability for only $40, I'd love to see you try it out and compare the amount of development done in the last ten years.

[@rp7155]

1:27 is genius, you crack me up 😂

[@gilles4prezudent650]

The Master Grade Barbatos is my absolute favorite model kit and also the first one I ever built. I ended up mangling one of the shoulder pieces and replacing the entire inner frame with one made of metal. So, now it looks all cool with its shiny gold v fin.

[@thequestbro]

Your next kit should be the MG Zeta Version Katoki (Ver. Ka.) The simplicity of the transformation will completely blow your mind.

[@deanprowell7947]

Someone didn't watch until the end of the video...

[@Borgron]

Bro didn’t make it to the end.

[@anthonymartinez8607]

You want to suffer? Try real grade #01, the RG RX78-2. Being the first real grade it has a lot issues, what we call the early real grade syndrome started here. A lot of people really hate this kit, personally I thought "Im built different" and bought one anyways. It is loose and easily falls apart. Another one is the MG Unicorn or MG Banshee and any variations (excluding the MGEX Unicorn thats a different kit), the unicorn is a transforming kit and the mg has some issues in the leg. This aside, the two kits you got the RG Epyon and MG Zeta verka are fantastic. For the mg zeta, please be careful when building the head, wont be as bad as the rg but it requires extra attention.

[@d3bugged]

The first RG Rx-78-2 was really solid, there's really no such thing as early real grade syndrome. People for some reason treat the model kits as figures and get too rough, avoid using glue and mess with them too much.

[@anthonymartinez8607]

@@d3bugged idk man, id already been building kits for years. Not rough with my kits or used glue, still came out loose and hand-grenady. Especially when compared to other earlier rgs like mk2, zgok, or astray

[@negiandtoast8839]

This a you probably. My Rg RX-78-2 isn't indestructible or anything, but it isn't a nightmare. The worst issue it has is that the skirt joints are shallow ball joints. Other then this, the lower ankles go loss. But honestly. I just need to hit it with a thin layer of clear coat on the ankles. Don't get me wrong. It ain't perfect. But it ain't no saint.

[@Falloutrip]

I'm glad they eventually got away from transforming/ core fighter kits. Pretty much all of the MG and RG sets that use either core fighter or transformation systems are notorious for being frustrating and fragile. I would LOVE to see you give something like the RG RX-93-v Hi-nu kit a try. It's widely regarded as one of, if not THE best RG kit ever made. Tons of excellent mechanical details while still being rock solid (for the most part).

[@Sonikgav]

The main issue with those early RG's isn't that they're particularly bad to assemble, it's that they actually get worse as time goes on and those inner frame joints get weaker and weaker. Anything based on the "Strike" Gundam I've had an issue with, like the Aile Strike or the Build Strike. You've already bought the Epyon which is one of the best RG's with a Transforming gimmick. The newest version of the Wing Gundam is my personal favourite (#35) which is based on the same frame. 2018 seems to be the last year that has notoriously tricky kits or kits that have a design weakpoint and break in the same place (like the Tallgeese's waist joint) although I do want to say the Sazabi (#29) is the exception that year. That was a good one, skip the Unicorn (#30) and then anything from 2019 onwards (#31 and after) should see you right.

[@lostchild00]

i highly recommend the RG Nu-gundam it definitely been my fave build to date. also good luck with that zeta verka

[@09philj]

I have a couple of Real Grade kits. The Real Grade Strike Gundam wasn't too painful, more complex than a High Grade but ultimately just builds a nice, solid Gundam. The Unicorn Gundam is something else. It's brilliant in that the transformation functions work really well, but also a nightmare because you have to build those transformation functions which depend on loads of really, really, really tiny pieces which you have to scalpel every last micron of sprue off of or they won't slide past each other properly. It's surprisingly solid in spite of this. My worst and least stable kit is the High Grade Gundam Exia which has never once felt solid. It falls apart if you so much as look at it wrong. It has a sword thing which is supposed to be able to unfold but it just doesn't. My personal favourite kit is the High Grade Aerial from the Witch from Mercury line, it's a really solid kit which replicates the gimmick of the Gundam in the show well (there's bits that can be attached to various points as extra armour or combined to make a shield), and I really really loved Witch from Mercury as a series so I'm attached to it in that way.

[@fernadogonzalez2940]

Don’t diss the the hg exia mold the repair is nearly as solid as the 00 you just have to tighten the shoulder joints

[@SadielHrz]

Ay the hg exia isnt that bad Its just a little old and most of it can be solved with a little glue aside from that everything else works perfectly Its strange your sword doesnt work though

[@Morrowinder777]

I have an HG barbataurus, and while it's cool (barbatos centaur? Sign me in!), it's VERY flimsy and even posing it a bit it's easy to come apart (nothing breaks, luckily). Not the best kit to start with.

[@fernadogonzalez2940]

@@Morrowinder777 it’s literally to of the most flimsy gunplas human centipede together

[@valthanders]

I recently build the RG zeta gundam and I have almost the same experince when you build it (it's my third gunpla and first RG). Z is my favorite gundam so for me it's a must have. I also heard the rumors of the terrifying hand granade and the thing is that I don't know if it's thaaat bad, but I enjoyed building it. Thanks for the video, now I know that I don't want to tranform this thing EVER!

[@GojiraFan-in9oo]

This is not the ABSOLUTE worst that Gundam has to offer There is the RG Sinanju

[@PaulIsBadAtStuff]

I'll make a note of that thank you

[@XB3Gaming]

Sinanju wasn't that bad. You *do* need to glue the small trim pieces on and reinforcing the joints is kind of a must. The biggest flaw is it was designed around the Gundam Mk. II's frame and it wasn't designed to handle the extra weight the Sinanju has. It's really nice that they color separated the gold trim unlike the HG and MG kits, and the glossy red on the plastic is really nice.

[@GojiraFan-in9oo]

@@XB3Gaming Mecha Gaikotsu would disagree

[@GojiraFan-in9oo]

@@PaulIsBadAtStuff When you build it you're gonna have to make this little reference in the video The RG Sinanju's inner frame was reused from the RG Gundam Mk. II, and while the Gundam Mk. II is able to handle it, that frame is too small to handle a mobile suit as big and ornate as the Sinanju.

[@XB3Gaming]

@GojiraFan-in9oo he isn't the end-all-be-all when it comes to Gunpla lol.

[@justiceburke6451]

Really any of the RG models that out after the Unicorn Gundam are really solid RG kits. I've but together the RGs for the Wing Gundam and the Tallgeese (both from Gundam Wing) are were both really solid and really nice, and the transformation gimmick for the Wing Gundam is not only really solid but also really easy since you don't have to take any parts off or anything

[@matthewhibbard9807]

Awesome RG with simple transformation that looks badass is Epyon. The Zeta plus MG is a cool transformation because it’s just bigger and easier.

[@Null_Casual]

i really love this video. honestly, get yourself a pre-order for the new RG RX-78-2 Gundam 2.0. its gonna be amazing, considering the first RG was good for a proof of concept, until it falls apart like this zeta. the RG 2.0 is set to release this august. though if you cant wait, id say look for the RG Sazabi, RG Hi-Nu Gundam. theyre both fantastic

[@UqiSylune]

if you want another kit that will make you wanna Minecraft yourself, try to build RG Zaku II and not lose a single piece (also, you have to put the stickers on, yes, the spike ones too)

[@KisekiFan]

My man, as a fellow beginner i think its best to get what you like and enjoy the experience yourself whether its good or bad cause like you said its a good way to measure up on whats good and whats bad in future purchases. Also atleast you're not as crazy as me going into MG Unicorn Full Armor Ver Ka as my 2nd build 😂 Also thank you for this video cause i had heard that older model MGs have thin frames which indeed made them literal time bombs considering how easily they can break and you have just shown me.

[@LoliconSamalik]

You're going to have a MUCH better time with the MG Zeta VerKa. The only frustration with it, (to me) is the ammount of waterslide decals for it, but at the same time, those water slides have trasformed the kit into something beautiful. Far more stable than the RG as you just showed.. Just remember to top coat the decals when you're done

[@tedhodge4830]

Bro I've built over 30 gunpla kits (including RG, MG and a PG) and I'm absolutely terrified of this thing Kudos to your bravery doing this live

[@MLRF10]

DOOD THE MG ZETA IS A MUST TO BUILD!!! YOU ARE GONNA LOVE IT. but the connector on the wing binders are on a thin piece of plastic so be careful on that. idk what katoki was thinking when he designed that.

[@purpleheart334]

You should try the RG Hi Nu Gundam, it’s a phenomal kit with so many cool mechanics like parts that shift when it articulates. It’s commonly heralded as the pinnacle of RG. Just make sure you get a stand for it, though. lol

[@peepandschleep9610]

Now do the MG Nu Ver.Ka. It's a beautiful model and the waterslides aren't anything new for a warhammer builder

[@14days]

Fantastic job my dude, you built the RG Zeta, finished transforming it, broke and fixed the model all in one video. That's gotta add at least 10 levels to your gunpla skills. 👍

[@pominglam9705]

Honestly, I liked building it, it was my second kit in like 10 years. Eventually I learned how to airbrush, went back to disassemble this RG zeta and painted it all up. Transformed it back and forth multiple times. Added the hyper mega bazooka that didn't come with the RG version. I also won a competition (1st place) with it 😆

[@CarlyJayJepsen]

I kept thinking while watching that you should definitely give the RG Epyon a go, so good going on picking it out - that’s been my favourite real grade kit so far! Had an absolutely horrible experience with the original RG RX-78 2, but cautiously optimistic about the ver. 2 that’s coming out this year.

[@Wulpul]

My first RG (and my second ever) gunpla kit was the RG RX-78. I ended up breaking the leg because it was so stiff, and so many pieces are prone to falling off, especially the thrusters, shield and skirts. But it made me appreciate the improvements that come in later kits even more, and it's also been a great learning experience. :D

[@Azkhashobbygradercs]

nah bro RG zeta made me cry because the legs broke on my own model

[@reallywrong88]

I am building the MG zeta ver ka myself and its definitely a few step above the RG. The thicker plastic and not relying on soft polycaps makes it much sturdier to begin with. Larger size just give you more room to do the transforming mechanics with. If you want even more zeta afterward try out the MG ZZ ver ka. Absolutely a great kit

[@Rikarikun]

wow, your managed to finesse your way through building the RG zeta. And didn't have any (major) issues. I'm actually happy for you. A non-zero amount of folks manage to break early real-grades while building them because they manage to do something wrong. There are a few tricks to it. But also yeah a lot of people don't like the RG zeta even if they don't break it while building it because it was engineered wrong and falls victim to floppy joint syndrome eventually if you don't perform maintenance on it at intervals that change in direct relevance to how often you play with it and also how old it is. Also one post-video thought: If you want a Zeta that will treat you better than the RG, the latest High Grade is basically a dumbed down version of the real grade and is somehow better because of it. Also if you want a REAL hand grenade, albeit you'd actually have to throw it unlike with the zeta which falls apart in your hands, try any RG unicorn (The HGs for Destroy mode work too though). Personally I'd suggest a full armor Unicorn RG though for extra hand grenade goodness in case you really want things to go flying.

[@michaelserna4982]

What makes more sense to me is you would keep the 1st one you built in plane mode like you said & by another kit & keep the 2nd kit in robot mode so you not sacrificing one mode over the other, & keep both on a rotating stand or table as a display piece! 🤔👍💯

[@Tokumastu1]

If you ever feel like tackling another RG from the Zeta line I recommend the RG Gundam MK2. Ingredibly solid, good articualtion and fun to build. You also get the choice of either Titan's colors or AEUG's colors.

[@GremoryThe56thDemon]

Now I need you to build the MG Zeta Ver.Ka, because I love that kit so much. Or maybe the 2.0, that one's a bit old but still great!

[@space9225]

I recommend the MG Barbatos, its such a fun build which comes out amazing looking. It has these pistons all over the joins that move and just look cool in general.

[@CollectableCrusader]

I recommend the mg Gundam Barbatos. Really good and really cool model kit with an entire inner-frame inside.

[@coldire1016]

Can’t wait to see epyon. Being eying it up myself. Highly recommend RG sazabi. Very different to the boxy gundams, more interesting shapes with lots of thrusters

[@yiningsu2576]

This was like my third kit that I got when I was 9-10 and let me tell ya. I had such little patience for this kit that half way through it I threw it at the wall stomped on it and left it on a box until I threw the box out without knowing it was in there. Nice vid btw 😊.

[@matthewlaw6556]

My friend has one. He just never transformed it and it was fine… until it eventually succumbed to ERS (Early Real Grade Syndrome) where the pre molded joints you saw begin to become a floppy mess so that eventually got removed from his shelf. Still nice to see that you’re enjoying the hobby and got by far the BEST Zeta Gundam kit that exists to replace the RG. It’ll blow that little old thing out of the water once you build it in both detail and in mechanisms. RG Epyon is also a good choice.

[@slickensmcgee2259]

MG ZETA VER. KA MG ZETA VER. KA MG ZETA VER. KA MG ZETA VER. KA MG ZETA VER. KA

[@kameoosama]

There's a little note at the top of the decal guide that basically says "season to taste" lol. Some kits come with extra alternate decals and stuff. That said, I actually really like the busy look of all the "space OSHA" warning stickers everywhere. As far as real grades _to_ build, the stock answer is generally gonna be the Nu Gundam or the Sazabi, both look cool and are really solid. From a content perspective there's actually an improved version of the original Gundam (and first Real Grade), the RX-78-2 coming out in August-ish. It might be neat to compare it against the original, or against some of the 4(!) different master Grades for that model, etc.

[@miguelsantiagoportilloport2234]

I really feel you on this one. My first ever RG and first ever gunpla was the sinanju RG. It is a shame some kits have such big flaws. (As you say, there are others that work just great)

[@stardust2942]

Ok, i just found this channel, and i really enjoyed this video and the way you narrated it/edited! But if you want to build another RG, please PLEASE buy the RG Sazabi, was my first RG kit and it's still my favorite, solid build (exept for the funnels) striking design and just really god damn cool!

[@bubuyogman2675]

Now that you've explored the hand grenade section of Gunpla I suggest checking out the ones with notoriously large sticker sheets like the HGIBO Gusion Rebake Full City. It would be interesting to see if you'll decide to use every sticker or just give up and give the thing a full paint job

[@dadrobit700]

If you ever want to consider going to some of the highest highs of Gundam after this, I cannot speak highly enough of the Wing Gundam Zero Ver.Ka Endless Waltz kit. It's a marvel and an absolute triumph. Mine stood on my table for weeks after just to be admired.

[@MegaMan192]

I have to say, I got that Zeta Ver. Ka not long after release, that kit is peak. the new Ver. Ka narrative gundam C-Packs is also an excellent kit

[@Fru1tSamura1]

Understanding your new to building, id like to suggest something that seems ridiculously price but get yourself a set of god hands nippers for curring the spurs off the parts, they will help reduce a lot of the scuffing or over cutting that i noticed in your close ups. Also a few files to clean up the last bits of those spurs.

[@jaypeadieL611]

Out of all the rg gundams you could have built for a youtube video, you chose this one the legit demon incarnate of pain "for play". But if its "for display" its good especially if you dont transform it repeatedly. Just glue the tiny pieces.

[@fatesrequiem]

Don’t feel bad. I just tried to build this kit and I have been building and painting gunpla for two years now. I just painted the big PGU…..I broke the RG Zeta trying to transform it and had to junk it. Kit is just legendarily bad. My thought when I broke it was “if this was my first gunpla, I’d never build another.” You might wanna try the MG Zeta Ver Ka. Currently it’s like 40% off at Hobby Lobby every other week.

[@prismaticowl]

The RG Zeta was my first RG as well, way too early into my building career. It's all together now, but for a long time it sat in its box and I wasn't happy with it. The main issues are the leg to waist connections and... basically the entirety of the chest/head connection, which have a bunch of fiddly bits that don't like staying put. And yeah, gluing those yellow chest vent covers on is smart. It also looks hollow in the middle from most angles, which doesn't help. If I picked a new one up today, I'd have a much better time with it. Even though the RG Nu is my personal favorite, I'll throw my hat in with everyone who says to pick up the RG Hi-Nu. It's an aesthetics thing for me, but most folks prefer the Hi-Nu. E: Yeahhh, the transformation. Something I learned early on, thanks in part to the Zeta, it's that you watch KZbin videos of _other_ people transform them. You just keep it in robot mode and be happy it's whole. For transformable kits, the Unicorns count but... if you do that _please please please_ look up the broken arm joint thing. The most frequent post on r/Gunpla is people breaking their Unicorns' arms because they tried twisting in the wrong place. It's easy to avoid if you know where to twist, it's just that most people don't and twist the wrong place since the parts are right next to each other. RGs pre-Unicorn are generally considered worse due to the cool but very fragile pre-molded inner frames. Kits post-Unicorn are basically small Master Grades with buildable inner frames. The very first RG, the RX-78-2, is getting a 2.0 that looks to be fixing the primary issue people had with it. It was the first in its range and thus it had a lot of problems. As far as the stickers go, waterslides will always be better and are nowhere near as scary as people seem to initially think. Just use at least some Mr. Mark Setter to hold 'em down and topcoat the things after so they don't accidentally come off. They're far more forgiving than any other decal type.

[@yoskalevy5371]

I had the same feeling with the rg exia ! Everyone said it sucks but as my first rg i had a blast building it haha

[@jgreig76245]

with the reel grade line, make sure you work the moveable inner frame parts a little bit first so they loosen up before you start to assemble them. that way they move a lot more easily. plus you wont snap the parts so easy. thats what works for me.

[@haleybaca5260]

goes from one of the top 5 worst kits 2 of the top 10 best kits i have built over 250 kits i can confirm

[@thehatman7051]

I'm also very new to this hobby and haven't built this kit (and probably wont), but yeah like people in the comments and you yourself have said, it really seems like one of those things where if its your first RG it doesn't seem *that* bad until you try moving it and everything starts falling off, but once you know how much better it gets its terrible, *plus* the added wrinkle of this being a niche hobby, so whenever they see someone getting into it they get a bit over-cautious out of fear that a bad experience could drive someone off. For recommendations, I can *personally* vouch for the RG God gundam, absolutely fantastic kit and the first RG I ever built, I've heard nothing but incredible things about the RG Hi-Nu Gundam, and if you want a villain mobile suit rather than another Gundam, I've heard that so long as you keep its fragile shoulders in mind, the RG Sazabi is a beautiful kit. Also for High Grades wanna recommend the Gouf Custom, not because its an incredible build or anything, most of the witch from mercury kits probably feel better to put together, I just really like that specific mobile suit, and it'd be a good idea to get some more standard kits anyways

[@chaossandrock3236]

I was going to recommend the Zeta Ver Ka and Epyon RG so that you could compare the modern kits to the RG Zeta experience, so nice pick ups. I would also recommend Sazabi MG Ver Ka because its massive, the color layering is great and I love it. I also would recommend RGM-96X Jesta ether the MG or HG is good, the HG ARX-014S Silver Bullet Suppressor as it has a very unique arm reloading backpack system that is really kind of funny if you look into why.

[@tanker7107]

RG hi-*V* gundam is considered one of the greatest kits ever made. I've not built one myself, but I've seen studio G and a few others do it, and it looks killer!

[@carlzerris6566]

First off, well done for powerring through the transformation. And you are right. Dont try to transform it back. Great choices on your next purchases. I mostly collect HG and RG so i can't fairly comment on the MG Zeta. That said Funnily enough RG Epyon may actually be the best RG point of reference for you specifically having just done the rg zeta specifically to see the other end of what transforming RGs are capable now that Bandai has sort of nailed the RG formula. I suspect you have heard this multiple times already in which case my apologies for the repeat, but when it comes to RG,s anything from the RG Unicorn onwards (including the Unicorn itself) is the best real grade has to offer getting better and better. Personally i would also reccomend the Unicorn because A it transforms but in a different and in my opinion very impressive way considering the size and B because i am heavily biased towards Unicorn in general. Others i would throw in are the RG High Nu and any modern Witch From Mercury kit.

[@fen4554]

For what it's worth, I made the Master Grade Zeta in early 2000s and it was basically the same experience with larger parts. Amazing looking mech, floppy hand grenade of a model.