Tool Well Add-on | Paul Sellers

  Рет қаралды 139,169

Paul Sellers

Paul Sellers

6 жыл бұрын

This additional tool well is very handy for storing and organising tools you want to keep off the bench but close at hand.
Paul used the following stock, but it will depend on what you have available and the size of your bench:
2 of ¾” x 3” x 66” / 19 x 76 x 1676mm
1 of ¾” x 6 ½” x 66” / 19 x 165 x 1676mm
2 of ¾” x 3” x 6” / 19 x 76 x 152mm
More info on the Workbench can be downloaded here:
paulsellers.com/paul-sellers-...
There is more discussion on these videos on Woodworking Masterclasses. You can sign up (for free) here: woodworkingmasterclasses.com/...
Music credit:
Henry Horrell ( / henry-horrell )
For more information on these topics, see paulsellers.com or woodworkingmasterclasses.com

Пікірлер: 85
@Paul.Sellers
@Paul.Sellers 6 жыл бұрын
Did you already see this video and now your seeing it again? We are really sorry. We accidentally uploaded this video in a lower quality version than our other recent videos. Long-term we want the higher quality version to be available so the only way we could do that was to re-upload.
@GMan7800
@GMan7800 6 жыл бұрын
It was still very good instruction and I enjoyed it very much!! Thank you.
@pawekaczmarek5811
@pawekaczmarek5811 6 жыл бұрын
a truly professional approach! ;)
@I_love_cats12223
@I_love_cats12223 6 жыл бұрын
I have seen this before loved it then and love it now
@hansthomasandersen7836
@hansthomasandersen7836 6 жыл бұрын
Mr. Sellers, there's not an upload I'd mis even if it was a reprise, and; I can hardly see any quality problems in any of them. Thanks, again.
@AndreasWandel
@AndreasWandel 6 жыл бұрын
Paul Sellers learning is always a process of repetition. So...
@boozoochavis7506
@boozoochavis7506 4 жыл бұрын
I always come back to these videos as I get farther down the road in my woodworking - something I forgot or in this case, didn't know I needed. Mr. Sellers has more common sense than almost any person I have ever known - if he thinks it might be a good idea, it probably is! Eventually I will build his style of workbench, but for now I have retrofit my old clunker with enough to keep me going for the time being. Thank you for all of your hard work.
@edeppel6710
@edeppel6710 5 жыл бұрын
A big feature of this work bench is that it can be disassembled very easily. The one change I would make is not to glue the dividers over the mounting screws. I would drill a hole through the bottom underneath the dividers and then attach the dividers with one screw from below. The screws would still be hidden from view, but the add-on could be easily removed. There is little lateral pressure on the sides, so not having the sides of the dividers glued or screwed should not be an issue unless the back of the add-on warps badly. Love this bench and add-on Paul. Hope to build this for my next workshop.
@ronhope3970
@ronhope3970 12 күн бұрын
or even dovetailed the tapers for an extra 20 mins.
@imortaldeadead
@imortaldeadead 6 жыл бұрын
Thank you for thinking long term, for all future wood workers looking to learn from your great videos Thank you for sharing you knowledge and wisdom of the trade 👍🏻👍🏻👍🏻
@susantully5998
@susantully5998 6 жыл бұрын
Thank you once again to Paul and team for another informative and well produced video! I live in a flat and have plans to make a kitchen table/work bench hybrid based off of your excellent videos. You've inspired me to get going and work with the space I have instead of dreaming of the workshop down the line :)
@dougkarleskint2712
@dougkarleskint2712 6 жыл бұрын
Once again another demonstration of the quality and care you and your team put into your product. I don’t think any apology is necessary. Thank you all for what you do!
@williammcnabb1354
@williammcnabb1354 4 жыл бұрын
This entire series of building this workbench is really terrific. I learned a lot watching you and your techniques. Extremely well done! Thank you :-))
@abidmalick6232
@abidmalick6232 3 жыл бұрын
Thankyou very much for displaying your master skills for free.
@BigmoRivera
@BigmoRivera 3 жыл бұрын
Great Job Paul 👍 Now We All Need To See It Again On The New Bench
@tongloong1
@tongloong1 2 жыл бұрын
Paul is the Bob Ross of woodworking
@watermain48
@watermain48 5 жыл бұрын
I believe I'll give this a go for my bench...thanks Paul.
@63DegreesNorth
@63DegreesNorth 6 жыл бұрын
Such a good video, we can all watch it a second time! ;)
@heartforwon
@heartforwon 6 жыл бұрын
Enjoyed the video, always waiting for the next one!
@startazz
@startazz 6 жыл бұрын
Nothing better than watching a good craftsman at work IMO.
@214rwoz
@214rwoz Жыл бұрын
Thank you for all your time and effort.
@Clintboyd
@Clintboyd 6 жыл бұрын
I only decided to read the comments on this to see how many people whined about Paul using screws and an electric drill. I was impressed-not bothered-by the decision to hide the screws in the dados! Brilliant and clean. Great stuff as always, Paul. Thanks for coaching me into my now favorite hobby.
@CyborgxHR
@CyborgxHR 6 жыл бұрын
Greetings from Chile Sir, and thanks for your work.
@jishaku38
@jishaku38 6 жыл бұрын
I‘m going to make second one.
@An_Idiot_in_the_Wild
@An_Idiot_in_the_Wild Жыл бұрын
You're gonna do ur back in reaching out that far to grab tools out of there!
@johnnyvsx
@johnnyvsx Жыл бұрын
I like the trick of hiding the attaching screws under the shelf dividers.
@graemebrumfitt6668
@graemebrumfitt6668 4 жыл бұрын
Neat little project Paul. TFS, G :)
@royfass
@royfass 6 жыл бұрын
Thank you very much indeed!
@jamartin1
@jamartin1 3 жыл бұрын
Very nice! Thank you!💜
@softdorothy
@softdorothy 5 жыл бұрын
It was certainly an extra effort to make the tapered rabbet and I learned a good deal watching you. I wonder though if it would,d have been easier to make the traditional rabbet (constant depth of 1/4" in this case) and simply change the order in which you assemble the tool well. Glue the dividers between the sides before attaching the bottom. I suppose you wouldn't be able to hide the screws where you mount the tool well to the bench as cleverly.
@zenbooter
@zenbooter 6 жыл бұрын
Nice wood!
@usageorgepa.3293
@usageorgepa.3293 6 жыл бұрын
Nice,, I took the ends and instead of completely capping them ran a couple of dowels instead. The reason was to enable sweeping out shavings and wood dust out of the tool well.
@davidgagnon2849
@davidgagnon2849 6 жыл бұрын
What a great idea. Thank you for sharing!
@joedanger666
@joedanger666 5 жыл бұрын
A wise improvement!
@jonedington846
@jonedington846 5 жыл бұрын
Paul Sellers: the “Bob Ross” of woodworking
@BourbonEnthusiast
@BourbonEnthusiast 4 жыл бұрын
Bob Ross is the "Paul Sellers" of painting. :)
@jimdawson5299
@jimdawson5299 4 жыл бұрын
Do you notice how efficient he is? Very little wasted motion. That’s part of what allows him to get so much done in a day.
@pidunate
@pidunate 6 жыл бұрын
Nobody else wondering why butt joint and screws? Love all your work and grateful for all you teach 👍👍
@rootvalue
@rootvalue 6 жыл бұрын
Phillip Idunate I recognize the joinery mentality from personal experience. It’s a workbench, not a workpiece (in this instance). It won’t take a beating and doesn’t need fancy joinery, it just needs to get a job done.
@pidunate
@pidunate 6 жыл бұрын
Thanks Hakeem, that's what I thought, it just doesn't agree with me. I enjoy Paul's teach very much.
@user-cz5oy6os3z
@user-cz5oy6os3z 6 жыл бұрын
Спасибо,полезное видео.
@DennisWhitexxDennisDWhite
@DennisWhitexxDennisDWhite 6 жыл бұрын
Thought you was building one for the other side!
@kirbyspencer538
@kirbyspencer538 6 жыл бұрын
It was also a good way to remove the initial critical comments concerning the width of the holder and putting the screws inside the dados.
@IanFarrell777
@IanFarrell777 5 жыл бұрын
I plan to make my dividers with sliding dovetails (no glue) so they still hide the screws and stabilize the sides, but I can remove them if need be to disassemble and brush out debris as "well". Pun intended 😀
@rootvalue
@rootvalue 6 жыл бұрын
Love the video. I’ll screw this one onto the the one we made last time. ;)
@zenbooter
@zenbooter 6 жыл бұрын
LOL
@robbie6625
@robbie6625 3 жыл бұрын
Yo Dawg, we heard you like tool trays, so we put a tool tray on your tool tray, so you can tray your tools while you tray your tools!
@prepperjonpnw6482
@prepperjonpnw6482 4 жыл бұрын
I’m wondering why no ends? Won’t tools etc fall out? Also, it seems like a long distance from where you stand to where the tools will be and I thought the tool well was for the same purpose. It seems like there is very little actual bench to be used and more than half the top is Tool well with a tool tray after that. I enjoyed watching the entire series for the build techniques and stuff but would like an explanation for what each section is used for. Cheers mate
@KipIngram
@KipIngram 2 жыл бұрын
Off the wall query, Paul. The nice guitar riffs you open and close with - where did you get those? I listen and think I'd like to have more.
@Mark-ht4lb
@Mark-ht4lb 6 жыл бұрын
Great video. Can I ask why you made the dividers tapered, and what if you want to remove the Tool Well Add-on ?
@Paul.Sellers
@Paul.Sellers 6 жыл бұрын
You can’t remove the tool well if you use this method so you have to decide ahead whether this can be appropriate for you if not you can put the screws somewhere else
@CoachLexie
@CoachLexie 6 жыл бұрын
Paul how come your closeup shots are no longer close? Used to be we were focused so well that we could see the fibres in your knife wall - now, lucky to even see the cut!
@joeldoyle6359
@joeldoyle6359 6 жыл бұрын
Like the addition, however I will not attach to my bench with the screws hidden by the dividers. Yours reflects 50 years furniture building “hide the fasteners” LOL.
@kardRatzinger
@kardRatzinger 6 жыл бұрын
Hello Paul, what do you think about mini-workbenches that you clamp to your tabletop (if you don't have a proper workshop with a proper workbench)? Do you think they're useful? They seem to be quite popular of late.
@Paul.Sellers
@Paul.Sellers 6 жыл бұрын
Anything that gets you woodworking is good. You will find them restrictive, but for some work they are fine.
@Paul.Sellers
@Paul.Sellers 6 жыл бұрын
Anything that gets you woodworking is good. You will find them restrictive, but for some work they are fine.
@lloydmelsome-smith6629
@lloydmelsome-smith6629 5 жыл бұрын
What happens when you want to remove this additional tray? you can't get to the screws!
@roman_le
@roman_le 2 жыл бұрын
These are 20mm thick boards and you didn't bore the pilot holes for your screws. What is your rule of thumb when bore the pilot holes and when not bore the holes?
@jugbrewer
@jugbrewer 6 ай бұрын
how do you prevent the tool well from filling up with shavings? i have a narrow shelf behind my work bench that’s lower than the surface, and i find my tools are always getting buried and it’s a pain to clean up
@fieroboom
@fieroboom 2 жыл бұрын
The biggest thing I've learned from this channel is that I need a higher quality hand saw... My WalMart Stanley is just not cutting it 😂🤣
@mypony891
@mypony891 4 жыл бұрын
I don't understand why the dividers were tapered and not just a regular dato?
@brianmason6273
@brianmason6273 4 жыл бұрын
Does anyone know why the ends are open? It appears to be an open invitation for a tool to fall out and hit the floor. Ease of cleaning is lost with the dividers.
@Paul.Sellers
@Paul.Sellers 4 жыл бұрын
Not if they're removable. And f long tools can only lie lengthways in the well, how can they roll out? Also in all my years using it this way I've never known one to do as you suggest.
@dougbeach7299
@dougbeach7299 6 жыл бұрын
Sorry I missed the reason, why feathered dadoes?
@Paul.Sellers
@Paul.Sellers 6 жыл бұрын
It makes sense because you can slide the section of wood in place without the surfaces touching and pushing the glue out of the dados. This way the glue makes contact only at the very final moment. It’s very clever.
@dougbeach7299
@dougbeach7299 6 жыл бұрын
Paul Sellers that does make sense thank you
@mefg
@mefg 6 жыл бұрын
Odd location for the screws. What if you wanted to take it off temporarily for some reason - don't see an advantage to hiding the screws unnecessarily?!
@joegiotta7580
@joegiotta7580 3 жыл бұрын
Old furniture makers’ habit: hiding fasteners.
@Furao80
@Furao80 5 жыл бұрын
Missed the glue on the outside end of the second divider! 😧
@Exiledk
@Exiledk 5 жыл бұрын
Nope. Glue went inside the recess on that side. Watch again... from 26:23
@green_building
@green_building 5 жыл бұрын
I am really confuse and still haven’t found the real answers.. actually, what is the different between fiber and grain ? i wish you will giving me and maybe someone out there who need this exact definition.. thanks in advance Sir 🙏😬
@shawnphillips2556
@shawnphillips2556 3 жыл бұрын
I son know if you are still looking for the answer but whereas is exactly what you think it is, the fibers could be thought of as the smaller tubes that making up the wood itself. When he talks about planing down the fibers, he is referring to the fuzz, the fractured ends of all the wood... fibers.
@DBYNOE
@DBYNOE 6 жыл бұрын
Ok, after the first view, why the tapper?
@oldbloke135
@oldbloke135 4 жыл бұрын
So that the glue isn't pushed out when sliding the divider in.
@softdorothy
@softdorothy 5 жыл бұрын
23:18 ... bothered me, because the sides of your tool well may not be parallel. At the bottom the walls may be further apart then at the top (where you took your reference from). You admitted as much earlier when your plane-caddy was fitting tightly. Perhaps should have taken a distance/width reference from the bottom of the "trough".
@Paul.Sellers
@Paul.Sellers 5 жыл бұрын
Lots of perhapses but all in all I am happy about it.
@adampeplau3998
@adampeplau3998 6 жыл бұрын
Why the open ends?
@rootvalue
@rootvalue 6 жыл бұрын
Devour Eats Would make pulling cubbies out possible
@softdorothy
@softdorothy 5 жыл бұрын
24:00 Interesting, didn't need to stop the saw cut 2/34 of the way, didn't;t need to finish it with a plane. Perhaps the initial cut you made on the separator could have been in 1/4" or so (if you had cut the separator long enough) to avoid the problem of not having enough wood fiber to finish your saw-cut altogether.
@yvranx
@yvranx 6 жыл бұрын
The Matrix was altered....
Fitting the Castors | Paul Sellers
6:51
Paul Sellers
Рет қаралды 40 М.
How to Make a Workbench Drawer Episode 1 | Paul Sellers
37:15
Paul Sellers
Рет қаралды 155 М.
버블티로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 125 МЛН
I Can't Believe We Did This...
00:38
Stokes Twins
Рет қаралды 103 МЛН
How to Make a Tenoned Mitre | Paul Sellers
40:04
Paul Sellers
Рет қаралды 222 М.
What Is The Best Chisel
23:40
Wood By Wright ASMR
Рет қаралды 150 М.
Roy Underhill's Bench Hooks
17:57
Lie-Nielsen Toolworks
Рет қаралды 907 М.
How to Make a Workbench Episode 1 | Paul Sellers
37:07
Paul Sellers
Рет қаралды 870 М.
How to Make a Sharpening Plate Holder | Paul Sellers
30:17
Paul Sellers
Рет қаралды 269 М.
Don't RUIN your workbench with 2x4s. (Use these tips instead.)
9:19
Workbench Tool Tray - Simple Add-on
36:56
RobCosman.com
Рет қаралды 76 М.
How to make Winding Sticks (part 1) | Paul Sellers
41:21
Paul Sellers
Рет қаралды 336 М.
Smiling Critters BIG CLAPPER Herobrine
0:13
5G Vision
Рет қаралды 11 МЛН
Зарядил патрон гвоздями как в фильме «БРАТ»
1:00
Оружейный Барон - Top Hunter -
Рет қаралды 7 МЛН
Thieves and a Policeman - they cheated the kukumbik ! 🤣😬
0:47
BOGDANCHIKI
Рет қаралды 11 МЛН
Rainbow emoji Mukbang
0:33
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 7 МЛН
Ұлдар ұрыға тұзақ дайындады
0:55
Balapan TV
Рет қаралды 192 М.