Hope you enjoyed the video! Don't have a tool? Grab one here 👉 bit.ly/OneUp-EDC-Range
@HelplmAlive3 жыл бұрын
No discount code?
@CalzorSuzay3 жыл бұрын
No discount code for a 'partner'? Your discount code in other vids doesn't work.
@TheCrashingDad3 жыл бұрын
"A HAMMER!? DO YOU KNOW HOW EXPENSIVE MY BIKE IS!?" 😂
@nebnollock51983 жыл бұрын
That kid has one hell of a "tower of uncertainty"
@Vincultimate3 жыл бұрын
Looks dumb but is pretty smart regarding how much he will grow..
@olecranonrebellion99763 жыл бұрын
@@Vincultimate Actually about half that would do.
@robertmcriley95683 жыл бұрын
I'm so jealous of that kid with park tool allen keys
@bridge76163 жыл бұрын
Same
@misaelhallett92133 жыл бұрын
Are they expensive?
@robertmcriley95683 жыл бұрын
Yeah like £60 for the set
@jadenr.113 жыл бұрын
Why? They are pretty cheap
@waermelon57703 жыл бұрын
@@jadenr.11 bruh not everyone here has a 6 figure salary
@vongdong102 жыл бұрын
Got the threadless option and not happy with it tbh. You're stuck with the small capsule and you have to punch out the star nut anyway so get the threaded version. What oneup needs to do is make a long and large storage capsule that is the same length as the whole tool plus large capsule so we can either put it in the their pumps or steerer tube.
3 жыл бұрын
Awesome video! I'll definitely get one for my new bike once I receive it. Some constructive criticism (really): You may want to look into stabilizing your handheld shots in the future. I *never* had any issues with camera shake, but it was kinda hard to focus on the product or installation when the camera was shaking so much 😅
@SpencerBaum3 жыл бұрын
Should rename this channel "PTP, a sponsors dream"
@BHShaman3 жыл бұрын
Haters gonna Hate. I heard Tom Cruise works for free too.
@VanGirlYuka3 жыл бұрын
It's a very useful tool, Eric uses it more often than I do but I'm pretty happy about it✨Thanks Paul😘
@oliviacaputo26393 жыл бұрын
I just got the EDC lite tool on my bike and it is incredible! I highly recommend it
@superstar9991003 жыл бұрын
The EDC tool with the large storage container will fit in the Fox38 fork with the elliptical steerer tube. All you have to do is sand the large container to remove some material and then finish off with some fine wet and dry to achieve a nice finish. However, the bottom plug won’t fit, but I cut my bottom plug just so it inserts into the bottom of the fork, just so it keeps out most of the crud.
@nathansu36913 жыл бұрын
what if i have an edc stem?
@LenaCourtney Жыл бұрын
Very well put together video that showcases all the current one up edc products and non-experts being able to install them. I'm deciding between the Threadless and threaded. 1. I have a cap at the bottom of my fork that hides an airtag. Would I still be able to use either one of them, particularly the Threadless capsule? 2. Does the Threadless carrier add that much noticeable weight compared to the threaded? I'm not a weight junkie but would only mind if I can feel the weight difference while riding
@karl_okohan3 жыл бұрын
This is my dream upgrade. A multi tool in my bike. I can't even afford a descent one. Or any upgrade for that reason. So that oneup EDC is my dream "upgrade"
@mrsmartypants_13 жыл бұрын
The ascent ones are 50% cheaper 😂
@karl_okohan3 жыл бұрын
Well yes, but the style of the uneup one. I just love it
@mrsmartypants_13 жыл бұрын
@@karl_okohan It is a cool design. I worry about it loosening up and rattling thru time. I hate extraneous noise coming from my bike. But love Industry Nine Hydra hubs (“swarm of mad hornets”). Go figure.
@jellesnellings35473 жыл бұрын
The best, most informative whilst being fun, #ad video I've seen!
@bigrambo131410 ай бұрын
Any idea if this fits a zen ultimate? Great vid 👌
@Emtbtoday10 ай бұрын
I want one but seeing the Green one up sides snapped off on the dirt and others saying its very weak have they improved the thickness around the bolt holes and the head set tightening key is causing damage I'd rather test it for myself the lite i think needs the anodised sheath like the full v2 the plastic doesn't look near as good
@rsmart842 жыл бұрын
Is there an advantage with the threaded over the threadless ?
@davelloyd84543 жыл бұрын
Paul can you show us how to use the quick link splitter (not the chain breaker) please. I can't get it to work on SRAM power links. Also, what's the rubber star shaped washer for in the tool packaging?
@superstar9991003 жыл бұрын
The rubber star shaped washer is for the Fox38 fork with elliptical steerer tube and holds the tool in place to stop rattling as the bottom plug won’t fit elliptical steerer tube of Fox38.
@andersun163 жыл бұрын
Tech weeinie tip - always use lube when tapping. 3-in-1 oil, motor oil, or anything really in this case as the tap is pretty sturdy.
@derekjarman16383 жыл бұрын
Love my EDC tool!
@sherwood303 жыл бұрын
What do you think about the one up edc stem because I want to hold a c02 without having to tap threads into my steerer tube and the threadless carrier doesn’t hold c02
@thomasnielsen38323 жыл бұрын
It have been working fine for me :-)
@TechERni3 жыл бұрын
Would try fitting the EDC V1 on my road bike. Has a carbon sterer and it's closed from the bottom allready. The One Up thread tap should work fine with that carbon sterer. Will have to try soon and if anyone has any ideas please comment below.
@jessicahaydahlrichardson79513 жыл бұрын
Great video. I’m going to go and check out there website.
@JeffTcooke3 жыл бұрын
To clear up any misconceptions, all the medals in the background were my wife's.
@PaulThePunter3 жыл бұрын
Hahaha I feel like this was an internal discussion
@LukasEkers5 ай бұрын
Has anyone tested if you can fit a C02 can with the EDC in a Fox 38 Factory?
@Shaun_Taylor_MTB2 жыл бұрын
So the threadless carrier wont fit Fox 38's even with the large bottom container removed?
@jamesglezos3 жыл бұрын
Very entertaining and informative video. I might just have to grab an EDC Tool for myself!
@PaulThePunter3 жыл бұрын
Great stuff!
@razmtb50283 жыл бұрын
awesome paul as always haha
@TheBassallyear1003 жыл бұрын
did i spot an attempted fist bump at the end of the vid that wasn't reciprocated? dang youth! i have a oneup 70cc pump that i absolutely love. glad to see they have improved the strength of the edc tool and made a shorter cap for the tire plug - wish that had come sooner!!! i have been using a fix mfg wheelie wrench pro that i also rate very highly for its compact size and usability. in the meantime i have used the space in the pump to store a trail first aid kit and stuff a sh!t kit (both by potty packs) up the steerer tube. i'm prepped! lol
@PaulThePunter3 жыл бұрын
Nope, I was giving him the point of approval :)
@jovar75452 жыл бұрын
please explain to me, a noob, why i cant have this on my carbon fork gravel bike Canyon grail 7 AL. Thank you
@martinhayes50873 жыл бұрын
might be worth adding that threading your steerer tube voids your forks warranty
@singletracktrucker3 жыл бұрын
Not actually a true statement across all brands
@PaulThePunter3 жыл бұрын
This is the official word here - “Threading your steerer tube is easy to do with the EDC Tap, it does not void your fork warranty and it's the only way to run the V2 EDC Tool on some Fox 38 forks.”
@martinhayes50873 жыл бұрын
@@PaulThePunter copied directly from Ridefox.com website. "Except for the FOX 40, all FOX forks have a crown/steerer/upper tube assembly. These parts are pressed together (in the case of the FOX 40, the lower crown and steerer are pressed together) in a one-time, precision press-fit operation. Replacement of any of these parts requires a completely new assembly. Do not attempt to remove or replace the steerer or upper tubes independently of the crown. Do not attempt to add threads to the threadless steerers. Modifying the crown/steerer/upper tube assembly as described here can cause the rider to lose control of the bicycle resulting in serious or fatal injuries."
@-tr0n3 жыл бұрын
@@martinhayes5087 I highly doubt they will void the warranty unless you somehow managed to break the steerer. It's like warranty on a new car, If I add custom suspension, they'll still warranty the engine.
@superstar9991003 жыл бұрын
All Fox38 forks have elliptical steerer tubes including the Fox38 Performance
@milesferguson29632 жыл бұрын
does anyone know if the edc lite fits into the larger edc pump
@Drogos793 жыл бұрын
why no bottom compartment on threadless ?
@aleszverca3 жыл бұрын
Hey there Paul, love your videos with this, another great one✌👌, btw I am rocking the v1 EDC, to bad it's not compatible with the v2. Could I ask for a small thing that would help me out on a buying decision on the oneup carbon handlebars. So the thing is that I have a tubeless handlebar insert tool from lezyne that doesn't fit in my current sq lab 30x bars(just a hair thickness to tight). So I'm on the lookout for new bars and the one up's tick all the boxes and they would go great with my v1 EDC tool. Could you please measure the internal diameter of the oneup carbon handlebar ends, the minimum I would need to fit would be 17,9mm. Best regards
@TheRotundRider3 жыл бұрын
Tap tool not included?
@PaulThePunter3 жыл бұрын
Nope, but if you don’t want to buy one your local shop probably has one....or get the other options :)
@steverhysjenks3 жыл бұрын
Is this limited to MTBs only? Could this work on road bikes?
@jessicahaydahlrichardson79513 жыл бұрын
Hey Paul. One quick question. I recently upgraded my fork and bought it used. So it already had a star nut. Currently I have 2 inches above my stem that I have not cut down. Any recommendations if I wanted to go with the the one up lite tool. In terms of. Would you bang your star but in , then trim down your steerer tube and then bang the star nut in again for the proper length for the one up tool component install? I noticed in the video some people like that kid at the end have a super long steerer tube. Would you cut yours down first? I hate having to much excess. I feel like it could be a good place to hit your face on if you were to have a bad crash. Great video! Cheers, Jess
@PaulThePunter3 жыл бұрын
Follow the advice on the oneup website and check your fork compatibility:)
@superstar9991003 жыл бұрын
It’s weird how people can’t seem to access information that’s freely available on the tinternet
@coastalzapper48403 жыл бұрын
Totally off topic, are you playing in the SA?
@PaulThePunter3 жыл бұрын
Hahaha the Squamish Amateur!? I am!
@coastalzapper48403 жыл бұрын
@@PaulThePunter see you there
@josh_buil16313 жыл бұрын
Is it me or did she say thanks Bryan 🤣
@JoeAQuinn3 жыл бұрын
Paul The Punter exposed he is actually Brian the Punter
@christophergribbin39693 жыл бұрын
I just have my EDC tool, CO2 cartridge and pump on the frame. These options mostly look a lot neater 🤜🏿
@huntermartin10562 жыл бұрын
Where is the co2 cartridge ? I am trying to figure out if I can put one into my threadless carrier edc
@nerdfacellc3 жыл бұрын
First Gen tool is actually lime Green. ;)
@thomasnielsen38323 жыл бұрын
Haha, Paul doesn’t keep it a secret that he is colour blind 😁
@BHShaman3 жыл бұрын
Shame the Threadless does not allow big capsule. I have the chain link tool stuffed in there, bacon strips, and tube patches (when on fatbike).
@thesupernad3 жыл бұрын
One up tool is perfect for me, expect one deal breaker which has kept me from buying it. They have the ability to attach a c02 cartridge, but no inflator adaptor! If you screw on a C02 cartridge it removes the ability to use the storage container that could be used for an inflator.
@GokkunGuru3 жыл бұрын
Good channel. Wish I had subscribed before buying my dang Lazer Impala MIPS helmet.
@trooperV3 жыл бұрын
This is a nice tool indeed.
@chrisperrywv Жыл бұрын
My steerer tube is too short.
@Eldiablozatanas3 жыл бұрын
How he installed in a 38?
@charliesrandomthings54572 жыл бұрын
threads
@33R3X3 жыл бұрын
This was a good video 👍
@z0rgg-LUX3 жыл бұрын
Is anyone else having trouble to tighten their headset with the standard EDC installation (tapping tool)? My headset has a little play even if I’m overtightening the cap…
@punchToad3 жыл бұрын
will the EDC tool work on your new budget bike Paul? @paulthepunter
@kittykat76183 жыл бұрын
Cool!
@netposerx3 жыл бұрын
Paul the Shaky Cameraman. haha
@Northstar-Media3 жыл бұрын
All these You Tube creators must all live in the same neighborhood. inside a You Tube server
@Larix_laricina7633 жыл бұрын
2:15 Peep Paul’s Scott keychain #formersponsersdream
@milesludwig3 жыл бұрын
Hi
@arb5287 Жыл бұрын
A good one but the dude needs some camera skills tho..
@bex75043 жыл бұрын
'TREADLESS' x 3
@benjaminostling24463 жыл бұрын
It’s 2021
@justinrebstock71783 жыл бұрын
8th one here
@307weasel3 жыл бұрын
So, $60 for the tool , $35 for the tap, and another $25 for the required top cap. All just to store a multitool. The plug kit is another $35. Yeah, it looks cool, but not $120 cool for what can be replaced by a pocket, or (*gasp) a frame bag.
@CaliradoKid3 жыл бұрын
I don't appreciate the dishonest nature of this video. "Easy to Install." EASY TO INSTALL? Then you're over here telling me I have to know how to count to TEN?! Pff. Easy just went out the door along with my wife's famous vegetarian meatloaf.
@bentchristensen37703 жыл бұрын
Handicke bike in Us
@oliverr42103 жыл бұрын
Omg so early
@dannyhendo20053 жыл бұрын
Me too
@OhadELM3 жыл бұрын
Hey Paul! May the only one who's thinking this is way too much trouble to go through for just having a multi tool ?
@superstar9991003 жыл бұрын
That’s like saying it’s too much trouble to pedal the bike to make it go forwards
@OhadELM3 жыл бұрын
@@superstar999100 well no it's not the same .. 🤷♂️
@neilclark80873 жыл бұрын
What's the point of spending money on that multi tool? pure advertisement