OneUp Components EDC Threadless Carrier | Overview and Install

[@DailyMTBRider]

Man your neighbors are a tough crowd!

[@Mr8mileman]

I saw this comment before the video and it makes so much more sense after XD Great to see two bellingham peeps together!

[@oscaryehuda8793]

i guess I am pretty off topic but do anybody know of a good website to watch newly released tv shows online?

[@finneganrandall5667]

@Oscar Yehuda i watch on flixzone. You can find it on google =)

[@malcolmjameson8790]

@Finnegan Randall yup, have been using FlixZone for since april myself :)

[@oscaryehuda8793]

@Finnegan Randall thank you, signed up and it seems like they got a lot of movies there =) I appreciate it !!

[@jsw5387]

This makes so much more sense than having to thread your steerer tube

[@christopherpawelczyk4497]

I just discovered the first gen model and was impressed by it but was reluctant to purchase because of the threading, I'm glad I did a little more digging and found this one, definitely going to pick it up now 😀

[@anshuthecoolkid6078]

I just bought a edc lite and now I realized I should have waited

[@fazza2104]

Yup

[@DCNewsom42]

Same here.

[@Wildernessoutside]

will defo get one now was reluctant to thread my tube ,now I can run this with no worries

[@schism8286]

Oil slick went faster than 30 series graphics cards, damn it

[@nebnollock5198]

Can't be possible, nothing is faster than the rate in which 30 series cards sell out

[@TheLostCo]

Just wait until they go 40!

[@thelongestnameinthecomment9677]

Damn scalpers

[@schism8286]

@@thelongestnameinthecomment9677 Found one!

[@louiefriesen]

And now the Ampere GPUs are "old" lol. It's crazy to think that they came out a year ago.

[@jonathanmatthews4774]

Just got my EDC v2 and threadless carrier today! Then I realized I didn't have a 1/4 15mm socket or cassette locking tool :( But then I get to buy new tools! So it's a win-win.

[@ivan_gulla]

Hey, do you know how much does this setup weigh?

[@TheLostCo]

What's worse? Threading your steerer tube or Mike's sorry excuse of a mustache?

[@fazza2104]

I’ll say the latter 🤣

[@alcopower5710]

Threading sucks and I’m sticking to my decision

[@Wildernessoutside]

@@alcopower5710 snap

[@boostaddict_]

This is well engineered. I like the threaded stem cap idea, instead of having a star nut, but this is also a really good design. Seems like a lot of thought went into it lol. Might wind up buying eventually.

[@LordHolley]

I bought the Oneup stem a while back. It is a very nice solid stem but it is also surprisingly heavy. I put it on my e-bike where weight is not such a big deal, every other bike, thread that stem!

[@iCONAN1]

Weight Winnie

[@gabrielwolfe-nobaddays-8456]

Love the reviews guys

[@turbot8946]

I can’t write a google review because my device is playing up but, If you don’t know what shop to order from, CHOOSE the lost co. Crazy fast shipping considering I live in Australia!! Easy to order from, a wide range of products, and an all around great experience!! 5/5 stars

[@TheLostCo]

Thanks for the kind words! Cheers!

[@mtbfiend2515]

Oh man this looks great! can’t wait to buy this for my fork... annnnnnnnnd it’s out of stock. Can’t wait to get this next year! When it’s finally back in stock! 👌

[@TheLostCo]

We have most colors (Black, Blue, Red, Orange, and Green) in stock! Purple, Gold, and Oil Slick will hopefully show up in early May.

[@jisezer]

Just wanna say, I bought this from y'all when this video came out! And I love the product, your shipping was fast too. Only wish y'all were open on weekends so I could make the drive over to ya

[@darrenvickers1557]

Nice video, shame the EDC won’t fit in my Trust Message fork 🥺

[@jailbreakoverlander]

great info, im diggin this channel

[@eillord]

This is what I'm talking about!

[@vongdong10]

Just bought this set for my 2021 Scott Spark with the newest Fox 34 Performance and it's literally the same length as the steerer tube so I need to add a few spacers since even the shortest included bolt is too long.

[@blakewildgoose5450]

Does it work with a straight cut fork like an old RockShox recon 335?

[@gatecrasherserge]

Man, that was an awesome explanation - best by far! Thanks a lot

[@Rickie-37]

fyi fox 34 2012-2015 works with edc v1, maybe even v2, with the threads tapped. I took a gamble and found it works great, only exception is the full size storage capsule doesn't fit as the diameter shrinks down lower in the steer tube. Not sure if the compact capsule fits. But the tool itself fits flawlessly

[@BGraves]

7:40 magical spacers have appeared. No mention of whether or not they come in the kit

[@TheLostCo]

Good catch! No spacers are included with the Threadless Carrier, but we recommend reusing the spacers you currently have on your bike.

[@calvinboyle6700]

will this work on a 2021 fox float 34 rhythm

[@gogovitch66]

Love my EDC tool! 🤘🏽 The V2 will be installed in my new fork, as soon as I got rid of my creeky Fox36 Grip2 🙉

[@madhatter9631]

Why is it creaky??

[@gogovitch66]

@@madhatter9631 it's the steerer tube. It creeks on stoppies and hard impacts (no bottom out!) :-(

[@paramedicbarber974]

At 5:21 it’s mentioned to remove the O Ring, why is that the case as it’s not mentioned to pop it back. Just got this tool for Xmas and installing it so want to know if it has to go back on. Cheers

[@TheLostCo]

If you haven't figured it out already, the o-ring does not go back on. Without the o-ring on, the V2 tool should slide perfectly right into the Threadless Carrier. It will be difficult to get in and out with that o-ring on.

[@jpxc1329]

Definitely not threading my fork cause of warranty so I’m heading to my local shop to pick up the v2 EDC

[@Getoutside2day]

EDC looks like the way to go. Since I know the Lezyne Tool Insert Kit Bar-End is junk.

[@ANTheWhizkid]

Since here in Europe no bicycle shop has the tools to get the thread in your tube, you need to buy everything yourself and after a one time use its just sitting around... I would probably still go for the threaded one because it looks more minimalistic. Actually I´m in the market for one for 11 month already. It´s just always sold out or out of stock since forever :D

[@mtbjon3587]

Will the new tool fit the old EDC 100cc pump?

[@slip423]

Can we get a bike check on that stylus though? 🍻

[@dabooge]

Got one for my hardtail that has a raceface turbine r35 stem that I prefer now I can just swap the tools between bikes without spending extra coin on another edc stem. I'm a machinist and was already thinking about something like this seems like they read my mind. I'm not much of a fan of the edc stem with preload ring it works but this setup is better in my opinion.

[@Dieterbe]

Whats that starnut for that you need to remove from the fork ? Also "mushrooming the washer" what is that referring to ?

[@ItRainsPennies]

A star nut is a special nut that gets its name from its star shaped metal flanges, which keep it securely fastened inside your steerer tube. Together with a top cap and bolt, it allows you to compress the fork and headset components together, removing unwanted “play” between these parts. “Mushrooming the washer” refers to a washer folding in on itself (creating a mushroom shape) when force is applied in one direction from a bolt, and the washer is not supported over an adequate amount of its surface area from the other side. This causes the bolt to start to “push through” the washer in the middle, bending the washer and creating the mushroom effect.

[@pballerss]

Will this work on carbon steertubes with the correct dimentions?

[@joospraet]

Can you instal the edc in a straight fork tube?

[@captainberty6670]

Hi I was wondering if you could use a screwdriver as a punch?

[@TheSnero3]

This video is SO helpful

[@X0X0LFertilizer]

I keep a good chunk of purple fentanyl, a couple squares of tinfoil and a few cut up mc Donald’s straws. Just incase I break my collar bone again or need a quick trail side hit! Highly recommend any professional racer carry a good chunk of fetty incase shit hits the fan and you are in need of a good long term fix.

[@RicoJoseFernandez]

Just want to ask if EDC Threadless is compatible to Rockshox Judy fork for my XCaliber8 please.

[@MrSupermugen]

Where did you get the data that the fox 38 wont fit...? I have one installed in mine...

[@frannguyen]

You probably have the 38 performance. Fox 38 factory and elite are oval shaped steerer tubes.

[@MrSupermugen]

@@frannguyen mines elite...

[@guillermoe21]

Already have it. love it

[@johnfulkerson9408]

Does this not work with the large storage container and or tubeless tire repair kit? Great video, thank you!

[@TheLostCo]

Correct, the EDC Threadless Carrier does not work with the large storage capsule, but it does work with the smaller one!

[@godswitness3105]

I use the Specialized, steer tube tool. The top cap looks near stock, yet twists a spring mechanism to reveal the tool. If you need to use the chainbreakerbyou use the tool to unthread the bottom for nut. It has a space for.a chain link and I added a short length of chain just in case. Just another alternative!

[@decaysaypluhtheyst]

Do you have to use their EDC stem with the Threadless carrier? Or will any stem work?

[@MrDirrrty]

Threaded steer tube is still the lighter option. This is definitely a sweat clean solution though.

[@tisdale36]

I just bought a 2021 Specialized Rockhopper Elite 29 with Rockshox Judy forks. Will the threaded one fit in my fork?

[@JamesM-T]

Is the fox 38 rhythm grip compatible?

[@azpazlot]

Will this work on ebike forks? I have the rockshocks yari in my trek rail emtb.

[@05GDF]

2012-2015 Fox 34 including the Factory? Or are there no difference?

[@sebmour]

I am sticking inside the OneUp edc 100cc pump

[@wahyuwidyantoro9377]

on the website fox 38 only small storage , what do you think?

[@charliedevine6869]

Will it work on non-tapered 1 1/8 steer tube?

[@charliesrandomthings5457]

does this fit the tool fully with the larger tube thingy?

[@hedrick5286]

Dude. One needs to put some kinda instructions with the kit when you buy it. Had no idea I needed to remove the stupid o-ring

[@marcjohn7416]

Question for those who have this. Does it come with the valve for the CO2 cartridge or have space to store one?

[@joserodzm]

The OneUp pump acts as a CO2 valve as well!

[@pablomoreno7987]

Thanks Mike! great video

[@mleavitt787]

One thing you didn’t mention that I would have is that the large storage capsule doesn’t fit the threadless carrier, and you can’t use the master link pliers.

[@dawn-moon]

No Loctite on that bottom bolt ? Fox 38 owner here, so probably not gonna fit anyways :)

[@gcrawford31]

Will it work with a Trust Shout?

[@MancWithAMouth]

Will the edc v2 with a co2 fit in this? I've heard rather mixed reviews from riders locally who have tried the stem and constantly having issues of it becoming loose regardless

[@TheLostCo]

Unfortunately, not. The EDC V2 with the small capsule will, however.

[@MancWithAMouth]

@@TheLostCo no worries , just weighing stuff up for what can I get out of the bum bag and hidden on bike 🤣 got a HUGE bum bag but the more snacks you can fit in the better !

[@TH-ho5li]

Does it fit in a Fox 40 Factory?

[@jawzzy3]

Fox 38 performance steertube is non-oval? The bottom of mine looks oval... Am I missing something?

[@TheLostCo]

Hey JW, if you truly have a Performance and not Performance Elite Fox 38 with an ovalized steer tube, please send us a picture to [e-mail] Aftermarket Fox 38 Performance do not have an ovalized steer tube, and according to Fox they do not make an OEM Fox 38 Perforamance with an ovalized steer tube.

[@jawzzy3]

@@TheLostCo realized the company I bought the fox 38 from cut the original steerer too short and replaced it with another CSU (must have been from a performance elite).

[@superstar999100]

I have the Fox38 Performance fork and it is definitely elliptical

[@iammifl]

@thelostco it does not work on the Fox 38 Performance from 2022.

[@tricktrick82]

Can someone tell me Why I need to remove the 2mm o ring ? Thx!

[@maxturner5666]

With this work with the latest rock shox yari

[@TheLostCo]

As long as the steer tube length is within the specs shown in this video, then yes it will!

[@jonimenges3896]

Im affraid it lowers the efficiency of my headset. I got my hands on a very inexpensive chrisking headset which is pretty expensive - anybody got experience on this?

[@terrybull4604]

Does this work with trek knock block? I've never had my stem or top cap off to see what in there

[@TheLostCo]

From our knowledge, yes. The Knock Block is an external item on the stem, so you should be good to go.

[@terrybull4604]

@@TheLostCo thank you for the quick reply!

[@hugh6025]

any idea if this would work with the stock stem on a canyon spectral 29? the top cap isnt round so im not sure

[@sufyanm4661]

It should work since it depends on the fork steerer tube, not the top cap. I do understand the confusion though since canyon make weirdly shaped top caps, which i think look cool.

[@brendan1]

Is this better than the OneUp preload EDC top cap thingy?

[@roberttunemtb7444]

would you say this is the most secure steerer edc system yet?

[@carolinehix6128]

I would prefer if the tool threaded into the carrier. Eventually it might wear out enough that it does fall out. It's essentially just a stem lock with some space up the top. Not sure why anyone would get preload issues unless they are doing something wrong.

[@GokkunGuru]

This doesn’t work on straight steer tubes. The inner diameter of straight steer tubes bottleneck as you go down, so the carrier will get stuck and won’t go all the way in. I’ve advised OneUp to update compatibility fine print on their website.

[@samuelh31992]

Is the Rockshox Recon compatible? I have a 2019 Honzo.

[@Elbow_Grease]

As long as it’s in the size range, yes

[@MarcDumont]

So regular fox 38 with round steer tube are ok?

[@aaron.bcklmnn]

bro listen

[@MarcDumont]

Does not work with fox 38 performance 2022

[@Sarlasin]

Well thanx.... Now I just spent 150 bucks ...

[@waynemichalak1652]

Good video I already run edc lite 🤘

[@TheUlitamateStunt]

I guess this must be heavier than the threaded version? Looks really cool though, and a great convenience to not have this stuff in pockets or a backpack. Not for me right now though, I'd rather spend the money on something even more gimmicky like the TyreWiz

[@jaredp19]

Cant figure out how to use / find the valve core tool, help!

[@TheLostCo]

It is somewhat hard to describe, but it is hidden by the spoke keys on the tire lever. Use the t25 to loosen the spoke keys from the tire and you will be able to use the valve core tool from there. Don't hesitate to reach out if you have any questions! [phone] or [e-mail]

[@KruiserIV]

Is this compatible with carbon forks?

[@h0udinl]

Like road bike?

[@felixbeck1047]

Now one up says its also compitible with fox 38 factory

[@antesupe1627]

I have to say, I think I would've bought this threadless carrier had it been available at the time when I purchased my EDC V2 Tool. However, after threading 2 forks of mine, I really prefer the threaded top cap (and threaded steerer tube) vs. a star nut. I can't imagine the headset ever coming loose now. Not that that was some nagging problem, but it has happened a few of times over the decades I've been riding. However, if you ride XL/XXL frames (with long head-tubes), and like a lot of stack under your stem, this threadless carrier is compatible with significantly longer steerer tube lengths, which is definitely nice.

[@gustav4777]

Does it work with knock block?

[@TheLostCo]

To our best knowledge, yes it should since the Knock Block is only on the outside of the headset. You will still have to confirm the Threadless Carrier fits with your steerer tube length. See the Compatability section @ 3:25 for more information on that or give us a call or shoot us an email. [phone] // [e-mail]

[@gustav4777]

@@TheLostCo Thanks for the response!

[@t.s_mtb]

can you put them on 2017 fox 40s

[@TheLostCo]

I believe so! Just double check on OneUp's compatibility website to make sure that your steerer tube meets all the criteria and you should be good to go! -Tor 😎 www.oneupcomponents.com/blogs/edc-threadless-service-install/edc-threadless-carrier-install-compatibility

[@BenNeemann]

So it is basically the threaded one??

[@BenNeemann]

just you don’t have to thread

[@JPTHRICE]

oh... this was helpful. so i can EITHER have a storage capsule OR a co2 capsule🤦‍♂ i was kind of hoping i can have both

[@_ssharkyy__1749]

Will this fit the rochshox zeb

[@TheLostCo]

If the steerer tube length is in between 210mm and 265mm, there should be no issue. Feel free to check out the installation instructions on the page linked below, that will help you verify. thelostco.com/products/oneup-components-edc-threadless-carrier

[@ondrejmalina6609]

I have old one up edc and have bought new fork Zeb, can i just buy the sleeve for the bigger edc tool and fit the old into the new one?

[@TheLostCo]

Only the OneUp EDC V2 tool will fit in the Threadless carrier

[@ianmcpoland3071]

The minimum is 220mm for rockshox forks. Just tried doing it on mine (which is a 210mm) and it didn’t work

[@prodish]

Carrier was too long ? What fork was it ? What about EDC lite ?

[@mtbradar]

Is someone able to confirm for me if this is true - threadless carrier = only small storage attachment on the bottom = no room for chain breaking tool..? There’s no compatibility information on their website

[@TheLostCo]

The Threadless Carrier can only fit the small storage attachment on the EDC V2 tool, but the V2 tool has a chain breaker tool on it.

[@ptchristanMTB]

great! thank you man.

[@illgazillion]

Super nice!!!

[@mmodtomic7119]

Slick. Gonna get one!

[@beri232]

Does this only work on hardcore offroad mountain bikes or will it also work on my Trek Dual Sport 3 Gen 4 model? Don't laugh too long at me. Lol

[@Matt-S.]

Seems like the same system as Specialized Conceal Carry that's been out a few years now.

[@tayshred5637]

How do I remove it

[@1989kimimaro]

is that you kyle from Snl?

[@chrissears6656]

I keep my weed in mine. Also with some small modifications of my own I turned it into a waterless bong

[@jedisdad2265]

Gravel?

[@superstar999100]

ATTENTION I have just installed the threaded EDC into my Fox38 Performance Fork. Be aware that the steerer tube on the Fox38 Performance Fork is elliptical (oval) and would NOT accept the thread less tool. I threaded the steerer tube and installed the V2 tool with the small storage compartment, the large storage compartment and fork plug does not fit because fork is oval.

[@samlee3036]

Did you try before or after watching this video? He says this clearly in the video that all versions of the 38 are incompatible...

[@LoranBriggs]

Are people who put it in their stem not carrying a pump? I assume if you are also carrying a pump then just storing it in the pump would be simpler no?

[@TheLostCo]

Most likely, no. Most people don't carry a pump and just bring a c02 inflator instead.

[@LoranBriggs]

@@TheLostCo I see. I've never had good luck with CO2 so I got the pump. Also easier to switch from bike to bike.

[@thebrowns5337]

Oil slick finish costs more btw