Cab Removal -6.0 Powerstrokes

[@matthewmcqueary9057]

This is probably the best cab removal video on YT. Thanks . Rebuilding my 2004½ 6.0 with 374k miles . People talk crap, but this engine, when proper updates are made, it's a 100% stud of a diesel engine.

[@PowerStrokeTechTalkwARod]

Thanks pal. Was an old video

[@hustleeveryday6582]

I agree, with the right updates the 6.0 can be one of the best motors Ford made! With that said, I am a 7.3 guy simply for their factory reliability, but I have a lot of buddies that have gone through their 6.0 and not only are they now reliable but they are a power force to be reckoned with!

[@jonsimmons3507]

As a senior master tech it's refreshing to see guys at a dealer ship doing work the right way and not just pushing shit through as fast as they can for a bigger check. Wish the dealer I was at had more guys like this,I might of stayed.

[@PowerStrokeTechTalkwARod]

Thanks buddy!!!👍👍👍💯💯

[@screamindemon811]

I dont know what amazes me more here, A-Rod's attention to detail and his work ethic or the fact that this guy got a premium care warranty on an 06 Powerstroke. Great explanation of the cab removal man, if a customer ever asks why it costs so much to do head gaskets, you can always point them to the video and they can see just how much work pulling a cab is. Mind you watching guys take cabs off in less that an hour and a half is always something else, one thing I will say though Ford sure made it easy to get the 6.7 cabs off compared to the 6.4's and 6.0's. An engineer finally listened maybe? who knows but still makes life a little easier.

[@PowerStrokeTechTalkwARod]

Thanks demon guy, yea every time gets quicker and quicker when i rip em apart! Could do em in my sleep lol

[@kirkenstang]

PowerStroke Tech Talk w/ARod also the fact you’d had that cab off before helps with things coming apart ok. Where you located? Because when my Ford needs work I’d love you to do it!

[@PowerStrokeTechTalkwARod]

Deeeeeetroit!!

[@PowerStrokeTechTalkwARod]

Id love too, fly mee out!!!!!!

[@brandonrichards4191]

Thanks for this. I'm removing a cab off a truck in my home shop. This video is super helpful.

[@cobraman428]

It honestly looks like at 12:48 that you didn't push the steering shaft up and into the column.....GREAT video and thanks for posting. Explained very well. One thing worth mentioning is once the cab is ready to lift, strap down the steering wheel so it doesn't turn and mess up the clock spring. Thanks again.

[@PowerStrokeTechTalkwARod]

I knw cuz i had 2 roll the cab back, so if i need to adjust it on the hoist i cld

[@hustleeveryday6582]

I have a 99 7.3 and this winter while I'm out of work for a few months I want to get back in there and do some work that's easier with the motor out. All the work I have done so far as been done either through lfting the cab just enough or lifting the motor just enough ie. body bushings, oil pan, ect. I do have an engine hoist, but I have been hesitant to pull the motor. I sure do wish you could be closer to me for your exertise as I am not mechanic and I am always second guessing myself. Thanks for the great video, I liked and saved the video for later, it'll surly get watched over and over again!

[@HiTechDiver]

Thanks ARod. Good video. Got my cab back on, and putting mine back together now, so bouncing off your video to make sure I get everything back together. I forgot to have my AC Vac'd until it was too late, so just removed the AC compressor and hung it securely; that was a "fun time had by all," but it worked. Thanks again for an informative video. Some people like to tell their life story before getting to the point; you didn't waste anyone's time on this one.

[@PowerStrokeTechTalkwARod]

Fuckin awesome comment, thanks bud!!!!!!

[@murica6606]

Just seeing how other people pull cabs. I got a job at a shop, and have been pulling cabs for almost a year, About 2 trucks a week. I’ve done 3 all by myself. Rebuild and all. Not bad for a 17 year old. Haha

[@PowerStrokeTechTalkwARod]

Haha lol

[@jerrybrandt9377]

Go to college

[@wademccowen8253]

Nice for sure but FYI, give the dude props on his video before you say look at me! 17 and doing this work is legit no disrespect. Age will bring you respect, keep grinding just thank others before you point at you.

[@jimrodz9203]

Good hustler get it

[@georgea6403]

Where yat? I need it done

[@WatchWesWork]

Well, it's interesting to see removing the cab. I've done several with the cab on. It's not that big of a deal. Got to be a little creative around the heater box, but otherwise no big deal.

[@jerrybrandt9377]

I agree!! Take the grill and rad out and your good!!

[@Ka_Gg]

Great video. I had it on 1.5 speed. Quick and to the point! I always thought removing the cab was silly, but really this process doesn't seem too bad (if you have a lift). Also, I'm sure it's easy as hell to work on the engine that way too.

[@graciesdad3293]

The best to the point video I have watched on this procedure.

[@PowerStrokeTechTalkwARod]

Appreciate that

[@WatchWesWork]

Good video! If you heat up the cold side CAC tube with a heat gun it slips right on.

[@The_M-An-M]

Thank you for posting this. Just bought an 03 and a parts 07 f550 that no one wants to work on. I'm about to school myself on these trucks...with your help it seems. Thank you from Canada 🇨🇦 "eh" ahaha!

[@PowerStrokeTechTalkwARod]

Friggin aye rights we do boyz, the we cheeched 🇺🇸

[@RobUst000]

That's an amazing amount of detail. Some things look better than a 6.6, body bolts in the cab? No way. Great video.

[@PowerStrokeTechTalkwARod]

Thanks

[@randomgooglename]

doing cab off on same truck and year as this one and cab off on an older cadillac deville northstar for re-seal at the same time right next to each other. loving the mechanic life right now.

[@raider762]

Beautiful. Looks easy enough. I will use this for reference if I have to yoink a cab off. I 'm thinking the experienced guys at your shop can get that cab off in 2-3 hours.

[@ajjeanson]

Thanks for taking the time to add this video! I'm lifting the cab off my 2003 6.0 and this has been a tremendous help. A little side note - I'm not certain if this cab is the same setup (I'm working on a extended cab) but I had a wire harness plug I pulled from the cab to the frame right by the transfer case that wasnt in the video. Also random fact, this video was posted on my birthday. Thanks again, cheers!

[@PowerStrokeTechTalkwARod]

Thanks bud!!

[@davidbalderston4665]

Very nice and just what I needed, just picked up a 6.0 with a head gasket issue for super cheap

[@PowerStrokeTechTalkwARod]

Gravyyyyyyy

[@jojomorgan8556]

👍nice break-down. BTW I watched at 2x speed and still had no problem with understanding the process ... btw thanks for showing where the ground straps were hidden... I always end up having to replace them if noone reminds me..... why engineers like to hide them is still un-fathomable to me....

[@georgea6403]

Great video! I need to replace my rusted 2002 cab. Any idea where I can get a rust free one?

[@PowerStrokeTechTalkwARod]

Down south

[@PRL1290]

Excellent vid, I don't own one but came here out of curiosity on how it was done.

[@PowerStrokeTechTalkwARod]

Thanks so much, stay and get comfy

[@jnlbrooks]

How long dose it take to remove the cab from the body start to lifting it?? then how long to re-install it?? thanks

[@AC.Prince]

Is there anyway to replace the body bushings without having to remove the rear seat? I'm thinking I may should wait until she needs motor work then replace them 🤔

[@PowerStrokeTechTalkwARod]

No...how else wld u get the bolts out

[@brentmurray474]

Very enlightening! I have to rebuild a truck by replacing the cab with one of a parts truck. Not looking forward to it. Trying to find out of I'll have any problems putting an 04 cab onto an 07

[@PowerStrokeTechTalkwARod]

Give me ur email & we can converse about that....

[@brucecrutchfield3473]

This makes me not want to buy a power stroke. Was looking at one and a friend told me about having to pull the cab to do any engine work. Think I’ll look for a 5.0 still. Is pulling the cab a common thing across trucks now?

[@PowerStrokeTechTalkwARod]

YES! We pull cabs on F150s too! U can do ANY engine work without removing the cab. What if it had a rack or boom that couldn't be moved over the cab..how ya gonna remove the cab then???? If you wanna save your back and the rest of your body....i dont care what any owner says....ur cabs comin off 🙋‍♂️🙋‍♂️ & BTW thats a lame reason to not own the Best Truck on the road....juss sayin

[@landenwray8417]

Great video no steps missed and very detailed great work man 👍🏼👍🏼

[@PowerStrokeTechTalkwARod]

Thank u, I appreciate your positive comment

[@oakhillfarmer4839]

I'm only 17 and own a 05 f350. But a bigger turbo in it by myself and was thinking about pulling cab to repaint my frame as it's pretty rusty and this looks like something I can tackle thanks👍

[@MrRfries]

Great detail, Thanks! Saw some others that glossed over all of the detail

[@PowerStrokeTechTalkwARod]

🙏🙏🙏🙏

[@dillanwebb]

I've found it easier on the 6.0 and 7.3 trucks to remove the front 2 seats instead of the rear seat. Much quicker and you're still able to access the middle cab bolt with an impact. I also remove the "twangs" on the rubber flap directly below the radiator since they're easier to get at and the rubber piece will just hang with the frame. Never removed the entire brake system like that, typically remove the lines coming off the module and plug everything off so there aren't leaks and a lot of air doesn't get in the system. Pretty cool to see how people do cab lifts differently. Keep up the vids!!!

[@PowerStrokeTechTalkwARod]

Yeah I used to do the brakes like that too until I saw somebody do it the way I just did yeah there is a few dudes in the comments telling me to leave the back seat in and do it just like you told me I'll try that next time thanks for watching

[@MrRfries]

One question, How far can you lift the cab without disconnecting everything? I'm doing a turbo on my 7.3 and I'd love some extra space to help me access and connect that up pipe v-band clamp. I got it apart ok, but reconnecting it seems like it's going to be a real B!@#$! Would lifting the cab a bit even help?

[@PowerStrokeTechTalkwARod]

Yea u cld sneak a few inches out, most def.

[@TheShanesousley]

Im watching this to pull a cab on a 2003 f250 super duty tomorrow. Very simple repair made ridiculous by rust. So I gotta pull the oil pan off to get the dipstick tube out on a V10. I believe this is gonna be the least frustrating method for doing so.

[@PowerStrokeTechTalkwARod]

Bro no!!!! Email me!!!! Pronto

[@brianskinner4328]

A time buddy. Add time compared to book. That's what sucks about flat rate. Awesomeness video my friend.

[@SniperInTheShadowz]

Much appreciated I'm going to have to change out my cab after the other night... cab did not like being on the roof...

[@hillcountryhunting820]

Where can you buy the lift for actually picking the cab up off the frame? Don’t really like the idea of using an excavator or backhoe arm lol

[@PowerStrokeTechTalkwARod]

Thats just a normal 2 post hoist. 18k lb. All i use for liftin cabbys, all over the internets. I highly recommend the Rotary brand!! You pay for what you get brah. Safety no.1

[@tedalmeida]

How many billable hours to remove and reinstall the cab?

[@wademccowen8253]

Thanks for making a video that helps ALL OF US MAKE MORE MONEY!!!!! Sir, I certainly appreciate it!!!

[@hobbinshotrods6051]

What other repairs require cab removal? I'm looking into buying an 05 F350 (6.0), which has already had the EGR deleted and head studs done. Also has new injectors.

[@PowerStrokeTechTalkwARod]

Then ur set. Oil leaks, head gaskets r my top ones

[@hobbinshotrods6051]

@@PowerStrokeTechTalkwARod Thanks!

[@SedatedandRestrained]

Just got mine in the air and thanks to your vid, nothing was pulled apart lol. Awesome explanation, only thing not in the vid was the running board light plugs but that's easy enough! Thanks again!

[@PowerStrokeTechTalkwARod]

If my videos helped make sure to drop by my paypal.....if ya want

[@wademccowen8253]

Great video, straight to the point, no bullshit!!! Thank you

[@PowerStrokeTechTalkwARod]

All im about babe, see u on Fridays!!

[@CaptainRudy4021]

How similar is the process to a 6.0 excursion?

[@nessunamore]

for a experienced shade tree mechanic without a lift it looks to me like removing the fenders would allow a ton of room. Does it make sense to do that?

[@PowerStrokeTechTalkwARod]

No the skeleton will still be there. Fender is just a hung skin....

[@nessunamore]

@@PowerStrokeTechTalkwARod well looks like I'm in for a treat. I do plan on taking out the evaporator core. Time isn't a issue for me. Haven't bought the truck yet. 300k and a likely head gasket issue, idk the seller wants 4k and to me it seems much

[@nessunamore]

BTW thanks for the reply

[@aloishaller5569]

Thanks ... great job haven't done one for a while got two coming up going to make things EASY.....🙏🙏🙏

[@PowerStrokeTechTalkwARod]

Gravvvvy

[@patchguy69]

On an 450 RC, can you do all this and then put a CC back on? What are the limitations besides bodybolt mounts

[@PowerStrokeTechTalkwARod]

Pretty much ud need the right frame.....🤷‍♂️

[@Springfield-eo8jl]

When did you take the front bolts out by the radiator? Why didn't you show the acctual bolt removal?

[@PowerStrokeTechTalkwARod]

Cuz they're not bolts but nuts

[@Springfield-eo8jl]

@PowerStrokeTechTalkwARod Thanks for proving my point. It would be great to have 1 video cover ALL the points of this procedure. Instead I have to look at 5 different videos from 5 different people and try and piece it all together.

[@stevohmelike]

Badass. Now I hate that I don’t have a hoist even more.

[@andrewraak9191]

Would thr same rules apply if you were swapping to a different cab?

[@PowerStrokeTechTalkwARod]

Huh

[@gordonliddy6997]

Great detailed video on this. But honestly, I would never buy a truck where I had to remove the cab to fix an oil leak.

[@PowerStrokeTechTalkwARod]

Well now u got me!

[@kennychason4437]

Great video! You made it look so much simpler than the last one I watched! I was just wondering where you are located and how much it cost to do studs, head gaskets, EGR Delete? I have a 2003 F-250 6.0 with 340,000, + miles on it! I'm a semi-retired, lifetime handyman and I love my truck and still need it to do my part-time handyman work. Please let me know what you think?

[@PowerStrokeTechTalkwARod]

Detroit....

[@mikehusoy8513]

Well done on the video, I've been working on 6.0 6.4 and some 6.7 and never pulled a cab on a 6.0. Useally just pull the motor through the front. Is the 6.0 the only one that needs the rear seat removed? I haven't had to do that on the 6.4 or the 6.7 ford. Heck did a 07 6.6 cab off and it was shitty. Again, great video.

[@PowerStrokeTechTalkwARod]

Thanks pal...yea after 6.7. I more rear seat removal

[@truthwillsetyoufree1503]

Hey bro how much is it to remove the cab? And can a bigger cab be mounted on to a 250 chasis? Right now I have a regular two door cab on, wanna replace it with a crew 4 door cab.

[@PowerStrokeTechTalkwARod]

No dice, you are not gonna have the cab mounts on the frame to do so. Be about 6-700 bucks for cab removal labor....

[@truthwillsetyoufree1503]

@@PowerStrokeTechTalkwARod we are dealing with frames a support can be welded

[@michaelandrew4849]

I wish I could find a shop that would pull the cab for me and let me come in and put do some upgrades it be so much easier to change out the y pipe and put a regulated return on make sure my down pipe isn't leaking and do a couple other things. I have a leak either under my turbo or behind it I made a boost test plug and I can hear air coming out from behind or under the turbo. I think my why pipe or down pipe clamp isn't on flush I have noticed my EGTs go up pretty quick even when im not pulling anything everytime I get up to about 55mph my EGT Guage is reading 6 ot higher it gets almost into the yellow I also noticed the other day when I was pulling a small motorcycle trailer with my duke 1290r on it that the EGTs were getting almost into the yellow and when my truck downshift and my boost reached 13psi the EGTs dropped back down pretty quick I also noticed my turbo feels like its struggling to get up to 15psi or higher I have to really get on the gas and my sct was set on performance not sure if that is normal I forgot to switch it to a tow tune

[@PowerStrokeTechTalkwARod]

Thanks 4 sharing

[@rgh622]

@@PowerStrokeTechTalkwARod LOL!

[@jerryknorr679]

Very good , looks like that's alot of work. Thank god there's A+ mechanic working on that truck.

[@PowerStrokeTechTalkwARod]

Thanks mista Jerry!!!

[@chrisbeavers3693]

That would be a great time to do a Egr delete and head studs.

[@billjenkins687]

That is exactly what I am having done to my 6.0.

[@miketaylor6282]

The extended warranty paid for itself in this job alone.

[@PowerStrokeTechTalkwARod]

Ahhhh YUP

[@fsteddie98]

What if your just replacing the body bushing? Do I still need to disconnect the same things?

[@PowerStrokeTechTalkwARod]

Not everything...ull have enough slack to do what u need

[@fsteddie98]

@@PowerStrokeTechTalkwARod thanks for the quick reply I'm actually doing right now I'm starting with body bolts

[@samsull6190]

You don't have to disconnect any electrical from inside the cab?

[@PowerStrokeTechTalkwARod]

Lolol, for what????

[@samsull6190]

@@PowerStrokeTechTalkwARod because I'm dumb and for some reason it didn't click that all the wiring that isn't unhooked is on the body lol. I've gotta do head gaskets and an hpop

[@PowerStrokeTechTalkwARod]

U gravy licker

[@alexandersheets1]

About to do mine soon, 2003 f350. It's got oil in the degas bottle so I'm just guessing it's head gaskets or oil cooler

[@PowerStrokeTechTalkwARod]

Just, oil cooler. U will need to replace everything that is rubber. Flush the engine and remaining cooling system with simple green and dawn dish soap combo

[@alexandersheets1]

Thanks, diesel tech Ron had a video on how he flushed his. Any recommendations on how to fix the situation? I've seen some "bulletproof" oil coolers out there but I'm unsure which one to pick

[@PowerStrokeTechTalkwARod]

Dawn dish soap and simple green combo....only way to do it!!

[@G_Rapids]

0:25 - did you just fart? lol

[@PowerStrokeTechTalkwARod]

😭😭😭😭😭😭😭😭😭

[@Specialized1993]

@@PowerStrokeTechTalkwARod Get that fart outta here

[@jamesdavid2043]

@@PowerStrokeTechTalkwARod hhahahahaha

[@gnarlock3927]

Lmao exhaust fumes

[@thelegend7735]

He absolutely let one out😂

[@patrickm6000]

this is a great video. I have an early '03 f250 that I'm pretty sure needs injectors. I have had a miss for a while now. I'm lucky enough to have a 2 post 10k lift in my pole building at home. So I guess pulling the cab is something I should do. I don't think my heads are studded and the truck has about 194k on it. I can see for sure how pulling the cab (4 full doors) will make getting to everything on the engine insanely easy compared to trying to even attempt it with the cab on.

[@PowerStrokeTechTalkwARod]

No bro cab on. Can do injectors all day. Watch my inj videos for 6.0

[@patrickm6000]

@@PowerStrokeTechTalkwARod some people are after me to do head studs also at the same time.

[@PowerStrokeTechTalkwARod]

Ahh

[@patrickm6000]

@@PowerStrokeTechTalkwARod just not sure if I really should.

[@PowerStrokeTechTalkwARod]

Lotta work

[@michaelchan8915]

Aaron buddy. I thought 6.0L diesels were old news for us dealership techs. Wow, it's been ages since I've needed to remove a cab on any 6.0 F-Series. I see you remove the HCU and master cylinder as one unit. I used to just disconnect the three HCU brake lines at the HCU and duct tape the holes while raising the cab with the HCU and master attached. I want to point out, the front two cab nuts are 18mm, not 19mm. If I recall correctly, the driver side cab fasteners were 24mm while passenger side were 21mm. I always wondered why Ford did that. If I may be so bold as to offer an alternative serving suggestion regarding the middle cab fasteners? Try removing all the fasteners for the front seats, and just lift the center section of the carpet just enough so that you can easily access that grommet and fastener with the air weapon of your choice. This way, you won't have deal with the BS of having to remove that awkward and heavy rear bench seat through tight quarters and risk scratching up the rear door panels in the process. Not to mention that stupid black plastic utility tray with the three 8mm bolts that one of them (I forgot which exact one) always seems to have a tendency to want to cross thread during removal.

[@PowerStrokeTechTalkwARod]

Lol, yeah i another viewer suggested that too. Ill have 2 try next time. Thought that was a good idea.

[@chrisclark1111]

when you doing my 2003 6.0 powerstroke?...

[@PowerStrokeTechTalkwARod]

HA

[@chrisclark1111]

@@PowerStrokeTechTalkwARod cmon...man....

[@PowerStrokeTechTalkwARod]

Bring it

[@chrisclark1111]

@@PowerStrokeTechTalkwARod where located? cost?

[@PowerStrokeTechTalkwARod]

Detroit

[@aaroncarranza1129]

How long does this rocedure take vs how much does it pay for cab removal?

[@PowerStrokeTechTalkwARod]

Comments

[@devin197601]

Ford could have built the front clip as a one piece like a tractor and life would have been way easier

[@bradbozarth1822]

devin smith, yeah but, then everyone would be fixing them and there wouldn’t be any money for us mechanics lol 😂

[@hansknutson2327]

Make them hinge & tilt like a cabover

[@PowerStrokeTechTalkwARod]

Good luck

[@CR500R]

While you're in there, gently remove the wiring harness (labeling wires as you go) then pull the 6.0L after disconnecting the motor mounts and bellhousing. After this, install the freshly rebuild 5.9L Cummins 12 valve........

[@jerrybrandt9377]

And be done for ever

[@JohnD595]

We actually wanna make power. Thats why we stay with the powerstroke

[@jerrybrandt9377]

Are you saying that a Cummins doesn't actually make power then?

[@JohnD595]

Jerry Brandt stock 12 valve makes about 160hp at the crank. They can be turned up obviously. Cummins make great torque that is undeniable but for high horsepower v8s take the straight six any day

[@jerrybrandt9377]

There are plenty of i6 making 1000 hp with stock internals. Anyways diesels are more for torque ! After all their for pulling and the i6 will always be king of the highway thanks to all the big trucks out there? V8 do better when fed gas!! I agree with you they are more radical and twist faster. But again I have a Kenworth with only 400 hp but around 2000 ft lb . A v engine don't have the geometry to achieve the stroke of any inline engine ever!!! Look it up.

[@deluch22]

Awesome Vid. Did not know this was such an intense process. What would be the best year of Powerstroke for working on at home without a lift??? I am loving Ford right now and hope to get my first diesel in the next month or so....And I try to do everything myself......Is there any way to do this without a lift??? Pleeeeease lemme know!

[@PowerStrokeTechTalkwARod]

No u can lift the cab without a hoist. The job i am doin can be done with the cab on but is a PAIN IN THE ASS. Cab removal preferred. 05-07 6.0's are good. NO 6.4's any 6.7 except 11.

[@deluch22]

@@PowerStrokeTechTalkwARod Thanks a bunch, that narrows my search in a good way!

[@deluch22]

@@PowerStrokeTechTalkwARod I'm up in Canada, I found an 04' F350 6.0 short box dually, which is what I want. 190k miles, around $9000usd. What should I look for when I go check it out??? You mentioned 05-07....Would an 04 be that much different?

[@PowerStrokeTechTalkwARod]

Yes it wld. You need to check tje build date and make sure its an 04 truck and not a carry over engine from 03. See it all the time

[@deluch22]

@@PowerStrokeTechTalkwARod awesome, thx

[@mikebrasoljr8857]

Just out of curiosity: what would one expect to pay for this repair? For the rocker seals to be replaced like this?

[@PowerStrokeTechTalkwARod]

Around 30 hrs labor, parts cld b couple hundred or near 1000. Depends on how big a can of worms the job is after you pull everything apart....

[@mikebrasoljr8857]

PowerStroke Tech Talk w/ARod ok thank you! Just trying to get ideas.

[@roller9158]

I have the same truck, with an oil leak..Where are you located?

[@PowerStrokeTechTalkwARod]

MI where are you......

[@roller9158]

@@PowerStrokeTechTalkwARod Apple Valley, CA

[@roller9158]

Apple Valley, CA

[@PowerStrokeTechTalkwARod]

Yikes sorry bud! Fly me out ill fix ur truck

[@aaronsaldana4144]

Bro plz tell me how to take off the thing on the transmission ???

[@PowerStrokeTechTalkwARod]

What!!

[@aaronsaldana4144]

@@PowerStrokeTechTalkwARod sorry I meant the shifter on the transmission

[@PowerStrokeTechTalkwARod]

Pops right offf

[@Chon2024]

Great video thanks for all the good tips

[@StorkTransportLLC]

Why pull the rear seat? I never do on the Super Cabs or Crews. Plastic bin comes up and out and you can remove the two rear bolts without issue.

[@PowerStrokeTechTalkwARod]

There are bolts under the carpet bub, no access for crew cabs.

[@StorkTransportLLC]

2 in front foot well, 2 almost directly under front seats, which I do remove to pull up carpet and access, and 2 under plastic tray in back. Just curious, I don’t remember ever pulling the rear seat. More than one way to skin a cat obviously. Thanks for the videos!

[@PowerStrokeTechTalkwARod]

Ahhh gotcha, will try 1 day

[@StorkTransportLLC]

Front seats unbolt and flop forward a bit and easy to hit center bolts with an impact swivel socket from the side after pulling the sill trims. Don’t even have to remove the seats from the cab. Easy to do when working alone. Your method probably easier overall tho if you have an assistant.

[@PowerStrokeTechTalkwARod]

Ill have 2 try that, cause that backseat is a heavy fucker n crawling thru the cab n what not. U my friend may have just enlighten me to do it another way!!! Thanks is to you😉

[@angelacevedo341]

Nice job . Wish I had a lift. Im doing one now one part at a time off the top.What a suck job . Specially around the ac system side.

[@PowerStrokeTechTalkwARod]

Yeppp

[@1curt12]

Newer ford trucks. Are the this labor involved to get the cab up. Or had ford made it a little easier

[@PowerStrokeTechTalkwARod]

Pretty much the same, few thing are different tho..

[@johnjennings5429]

My girls uncle up the street has a car lift and I’m about to get a 6.0 for a steal so putting an upgraded egr will be easyy cool I’ll buy it for sure

[@bholway223]

Great video! I’m getting ready to do one tomorrow. Thank you !

[@PowerStrokeTechTalkwARod]

Good luck player

[@yamaharidr450]

Hell yeah some good gravy work. Aftermarket warranties can be a pain to deal with but you can make some good money off them

[@PowerStrokeTechTalkwARod]

All Ford here baby

[@annaoslawsky7861]

We did the whole secure the cab to the hoist thing, but we don’t have a hoist. We just have a pulley that’s attached to some rafters 😂 cabs a little mangled now

[@elis51501]

Luv the music to the cab lift:)

[@davem3789]

I couldn’t find a video for 7.3 cab removal. Much significantly different?

[@PowerStrokeTechTalkwARod]

Pretty much the same...

[@davem3789]

@@PowerStrokeTechTalkwARod I finally removed my 02 cab. It wasn't too bad.

[@justintaylor6980]

Great great video. Keep up great work. Quick question have you seen any or a lot of steering boxes leaking on the 6.7 pickups

[@PowerStrokeTechTalkwARod]

Naw man i haven't. Have you?

[@ouimetco]

Nice video. I just bought a 2003 f550 6.0

[@PowerStrokeTechTalkwARod]

Tu

[@antn8387]

I really wish ford went with the reverse hood design to avoid all that trouble to work on the engine.

[@chrisgardner3133]

What models can i cab swap a 06 6.0?

[@PowerStrokeTechTalkwARod]

What

[@ShaneVollmer]

How much different is an excursion?

[@PowerStrokeTechTalkwARod]

Similar, got more body bolts rear heating/ac lines, fuel filler neck n what not...

[@427kammer]

I have an '06 6.0. I removed BOTH valve covers & changed the fuel rail plugs on both sides UNDER THE HOOD

[@PowerStrokeTechTalkwARod]

Ok

[@ericjensen1740]

I’m about to do this in my driveway with 4 jacks and a forklift. Wish me luck!

[@PowerStrokeTechTalkwARod]

DUDE!!!!!!! you got this.....

[@danstomber1664]

You will be fine ,They are easy

[@Carlitosway211]

*parking brake cable Can be used in an emergency but is not the intent. Also, they make parking cable release tools that make the job butter.

[@ryantaylor2144]

No matter how many times I see videos like this I'm glad I don't have a diesel.

[@bradbozarth1822]

Thank you for showing me where the batteries go lol

[@scottbecker2063]

You made it look so easy

[@moparvenom287]

Nice job brother really informative. Really cool that you had been in it before...have you serviced this one all it’s life?

[@PowerStrokeTechTalkwARod]

Yepp, until original owner traded it in.

[@moparvenom287]

PowerStroke Tech Talk w/ARod Thats awesome man, keep up the good work keep that 6.0 ticking for many more years to come she’s a very good looking truck.

[@cooperpedie437]

I didnt pull the back seat out, I just made a little cut in the carpet big enough to get an extension on the socket

[@kirkenstang]

Great video! You make it look easy bud!

[@PowerStrokeTechTalkwARod]

Thanks Joe

[@billbeckett1021]

Awesome vid!! Well worth waiting for. Do you lock the steering wheel so the clockspring doesn't get damaged

[@PowerStrokeTechTalkwARod]

No it doesnt spin at all

[@Itsa_Mea]

Nice & thorough. Are you recommending ARP's to the customer? Will they let you install them? Great job as always.

[@PowerStrokeTechTalkwARod]

Yes i did, yes they will, & the guy had no idea what they were.....he says oh ill just do'em later. Yea good luck with that.....his loss not mine

[@Itsa_Mea]

PowerStroke Tech Talk w/ARod - WOW! $500 now or $5000 later. His choice. I hope he educates himself before you put the heads back on.

[@Itsa_Mea]

Sounds like he may be the next 6.0 hater when he tunes it and pops gaskets. Or hopefully he figures out the 6.0 before he destroys it. What a shame. Clean truck.

[@PowerStrokeTechTalkwARod]

Yea clean. Bout 7 or 8 yrs ago, i yanked it for an oil leak from the bed plates. So to have 1 change owners n come back to the same place same dude, pretty coool.

[@PowerStrokeTechTalkwARod]

Ment same dude as me the tech, lol

[@kevinlamarr1424]

That’s seems easier than doing heads bolts with the cab on . How do you do the cab removal if you don’t have a lift?

[@PowerStrokeTechTalkwARod]

Ya kinda dont

[@kevinlamarr1424]

PowerStroke Tech Talk w/ARod , My 2005 F-350 6.0 was stolen and stuck in the mud on the river. I’m going to take out the turbo and injectors,to turn it over. If I have a bent rod I’ll have to find a way deal with it.

[@PowerStrokeTechTalkwARod]

So sry broski

[@kevinlamarr1424]

PowerStroke Tech Talk w/ARod 😂😂😂😂

[@colinthepanamerican]

if you look closely at the engine it says international on it that means its an navistar vt365

[@PowerStrokeTechTalkwARod]

👍👍👍

[@BaldDogM71]

Great Video!! Looks like alot of work!!

[@brianhoward438]

Great video,always wondered about that when they did head gaskets on my 2007 Harley Davidson.I only know one other mechanic with the attention to detail like you but he is only gas engines not into diesels.Would love to ask a couple questions on my new 2017 f350 but for some reason I can’t pm you.Could give my email?

[@PowerStrokeTechTalkwARod]

Yea sounds great!

[@mrpickels75]

Dang good video. Thanks!

[@mightymoeexcavating754]

Good job on the video,l guess the extra money spent on warranty paid for it self big time. Thanks for the entertainment

[@PowerStrokeTechTalkwARod]

No problem, glad you enjoyed!