Dstv Extra View Installation - 2 Dstv HD Decoder + Smart Lnb.

[@pbtecknology]

I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...

[@elvisnjehya1192]

Hi

[@slysepako446]

Thanks. I managed to install second decoder. Thank you sir.

[@pbtecknology]

You're highly welcome

[@andrewsallotey5449]

That was great, please what about tutorial on extra view hd decoder's with smart l n b

[@pbtecknology]

Which HD model are you talking about

[@natashaduvenage7642]

Thanks for the video wen I install the wire to the primary decoder it works perfectly.. but wen i install second decoder it keeps going on and off saying bad weather or check connection and ones we plug out second decoder primary works normally

[@pbtecknology]

Which type of DECODERS are you pairing?

[@oupamorudu8536]

I have two explora decoders they were working until the cable were worn down and needed to be replaced but now i seems to have lost signal on the secondary decoder. Can you assist.

[@pbtecknology]

Have you been able to solve it? Sorry for late feedback 🙏

[@belesdsikachiye6949]

I connected as you have instructed I even called DStv for activation am using explora (primary) and DStv Hd model 4s (secondary) I enjoyed extra view for 5 months not until today am experiencing error 143-4, I called DStv for reactivating but still am having the same error I tried to connect a heart beat cable the error cleared and pictures came after sometime I removed the heart beat cable it continued working but after a while error 143-4 came... Now my question is how can I get rid of error 143-4 without using a heart beat cable but just using a smart LNB...I thank you.

[@pbtecknology]

Get a smart LNB if possible

[@crespoemmanuel]

When and where do we use diplexer and splitter please

[@MohammedIssahak-mu2rz]

Good man

[@pbtecknology]

🙏🏾

[@mondayedward7247]

I luv ur teaching❤ how can I reach out to you

[@peterzulu1570]

Very helpful.

[@sbumagnificent]

Thank you very much for this video Sir, it's very helpful. But I have a question there's something I don't understand on the second decoder settings... I see you changing the User Band Tuner 1 Frequency value & User Band Tuner 2 Frequency value.. Where do you get those values from or maybe I skipped your video, may you please clarify for me. Thanks! 🙏🏾🇿🇦

[@pbtecknology]

The User Band Figures will be found on the manual that comes with the DStv smart LNB. Not all extra view installation requires you to set the user band figures.

[@babatundeolusola5848]

brother pbteck how can i share extraview decoder already connected into different rooms,but i want to share the two extra view decoders into four other 4 TV's in other rooms.

[@Ibrahood]

Great work

[@CharmaineMcleod]

Hi i have a explore 3b. how do you connect a 2nd tv ?

[@cawilaxmedsalaadcawilkarim7671]

Thanks pro

[@elvisnjehya1192]

For the second decoder user band frequency should be changed to can quite catch the numbers

[@lyons2547]

Can you do extra view with 3 decoders ?

[@pbtecknology]

Sure, 💯 But currently not available in every country

[@olebogengmichael7581]

Hi there I'm using 2 HD decoders and i bought smart LNB n connect bt there is error e143,I tried to call MultiChoice bt no luck 🙏i need help

[@pbtecknology]

* Check your cable connections * The distance between the 2 Decoders shouldn't be that much long. * Use 2 Unicable ports, if it doesn't work, use one Unicable and the universal port. * Most smart LNB may have a problem in sending the heart beat signal, so you can add a diplexer to the DStv smart LNB and check. * Call DStv office and put pressure on them to do the Activation, if they don't pair the two Decoders correctly, you don't have any power to make it work. Make sure you get a man from DStv on the phone, not a woman

[@Ibrahood]

Helpful

[@amosebanda7286]

Great

[@lindashalukwao3956]

An installer installed a smart LNB for me, we then did an extra view but only the Primary decoder playing, the secondary decoder gave me an error 143. I called multi-choice several times but no solutions still. I even took the decoder to their office the decoder came back working then after 3 hours its off again😭

[@pbtecknology]

Let the installer carefully check all the connections

[@simbarashesoko874]

Hey. Did you have your E143 sorted out? Am having the same problem

[@smithelectro-plumb2994]

My lnb a doesn't work can I use b and see

[@pbtecknology]

Sure

[@emejichristian7922]

What if I am using DStv multiswitch... what's the procedure

[@pbtecknology]

Bro I will post a video on that soon

[@pearlnyawoza7765]

Hey I did all the installation as you did but it giving me the E143 error .What can I do? Please help

[@pbtecknology]

check you Cables and the settings bro. There's no heartbeat signal. There's no connection between the two decoders that why you are experiencing E143-4 error.

[@pearlnyawoza7765]

@@pbtecknology thanks for the reply ♡ Do I need the heartbeat cable?? I used the smart LNB LMX 501

[@pbtecknology]

Check the index frequencies on the secondary decoder

[@pbtecknology]

Which decoder types are you linking?

[@pearlnyawoza7765]

@@pbtecknology I'm linking 2 HD model 6s as primary and model 5s as secondary

[@charlyyoung6501]

I saw decoder 3, that means 3 decoder can be connected using the same method

[@edwardkaumba1284]

What about the old hd and zappa HD decoder extraview connection

[@fieryd2215]

What if i don't hv yr signal tester device to test connection. How does one check without the gadget

[@pbtecknology]

This video will help you out kzbin.info/www/bejne/lYiliaKtarB8jrM

[@dikeikawinnie5930]

@@pbtecknology

[@jacksonamolo1319]

Can't I use two dishes

[@pbtecknology]

both decoders have to share the same signal from 1 LNB

[@claricematutu]

The presentation was ok but the music thete is disturbing to much.

[@pbtecknology]

Thanks for the feedback ❤️

[@andreuys3578]

music too loud kills your voice

[@pbtecknology]

Thanks for the feedback 🙏

[@ststephen7911]

Your background music isn't necessary...it is just a disturbing

[@pbtecknology]

Thanks for the feedback

[@juangazelle1321]

WTF!!!!

[@crespoemmanuel]

When do we use a heart beat please?