PCV Failure In Ford & Volvo's - Step By Step Guide - DIY Repair

  Рет қаралды 98,396

Gerard Burke

Gerard Burke

4 жыл бұрын

If I helped ya out? or just enjoy the content & you would like to buy me a drink ko-fi.com/gerardburke
In this video I show the step by step guide on how to replace the oil filter / PCV housing assembly in a Ford Focus 2.5 turbo ST XR5. This engine/PCV design is in many Ford and Volvo models. I will list as many as I know of below that this works on and a repair can be done.
I also go into detail of the knock on affects of a faulty or clogged PCV Valve should it go on unrepaired, including emission failures, turbo failures, oil leaks and potential engine failure due to lack oil of supply.
Tool options that I recommend and use - www.amazon.co.uk/shop/gerardb...
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.

Link for repair kit on Ebay - housing does not need to be removed for this type of repair - rover.ebay.com/rover/1/705-534...
Membrane for VOLVO FORD part number 30684381 engine oil filter housing
Membrane valve cover for:
Volvo C30 C70 S40 S60 S80 V50 V70 2.5T B5254T4
Volvo 30684381
Ford Kuga, Mondeo, S-Max, FOCUS II ST - 2.5T
Ford 1511222
new diaphragm valve for crankcase ventilation
Ford Focus ST XR5 220/225 & Focus RS - 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Ford C-Max - 2003, 2004, 2005, 2006, 2007
Ford Mondeo - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Ford Kuga - 2008, 2009, 2010, 2011, 2012
Ford Galaxy/S-Max - 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Fitting models (VOLVO specification):
Volvo C30 2.4l 5 cylinder - 2007, 2008, 2009, 2010, 2011
Volvo C30 2.5l 5 cylinder Turbo - 2007, 2008, 2009, 2010, 2011, 2012, 2013
Volvo C70 2.4l 5 cylinder - 2006, 2007
Volvo C70 2.5l 5 cylinder Turbo - 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Volvo S40 2.4l 5 cylinder - 2004, 2005, 2006, 2007, 2008, 2009, 2010
Volvo S40 2.5l 5 cylinder Turbo - 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Volvo S60 2.5l 5 cylinder Turbo - 2011, 2012, 2013, 2014, 2015, 2016
Volvo S60 Cross Country 2.5l 5 cylinder Turbo - 2016
Volvo S60L 2.5l 5 cylinder Turbo - 2016
Volvo V50 2.4l 5 cylinder - 2005, 2006, 2007, 2008, 2009, 2010
Volvo V50 2.5l 5 cylinder Turbo - 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Volvo V60 2.5l 5 cylinder Turbo - 2014, 2015, 2016
Volvo V60 2.5l 5 cylinder Turbo Cross Country - 2015, 2016
Volvo XC60 2.5l 5 cylinder Turbo - 2015, 2016
Volvo XC70 2.5l 5 cylinder Turbo - 2016
Website that also sells the membrane repair all the above listed vanos-bmw.com/membrane-for-vo...
Price for part is $15 - $18.90 - very cheap (not including delivery)
#P2187 #FordFocusST #PCVFailure

Пікірлер: 86
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Lot's of Information in this one guys, remember whether you are removing the housing or just the cap to replace the membrane/diaphragm, I would highly recommend to check the pipes for splits or any blockages. Due to the vast amount of engine's that this type of PCV valve assembly is included in, I listed websites and engine details in the description below. You should have all the information you need to repair this. Thanks for watching 🙏 🙏🙏
@zigzag7194
@zigzag7194 4 жыл бұрын
So my question is does the Volvo s40 1.8 2004 does it have the same set up ? I've done the glove test and it is blowing the glove up. The car only has 84,000 on the clock. Really really great video my only problem is I don't know if my car has the same set up. 🏁🤝
@jeffreyonyx6860
@jeffreyonyx6860 3 жыл бұрын
instablaster
@KeithJenkinsvideos
@KeithJenkinsvideos 3 жыл бұрын
Replaced diaphragm in my c30 without filter housing removed
@heinrichtonsing795
@heinrichtonsing795 4 жыл бұрын
Thank you, very helpful Gerard and instructive. Very little info otherwise available on these Kugas.
@emayteetee73
@emayteetee73 2 жыл бұрын
Thanks for taking the time to make this video and uploading Gerard. Followed it pretty much as you suggest. I’m guessing this car was a facelift as there were no similar connectors on my ECU (the red ones you un-clip). I have a pre-facelift and I just unscrewed the ECU and swung it out of the way. Airbox removal is the hardest part but once you locate the lugs on the engine block and notice the angle that they sit at, it gives you an advantage. Ford wanted £256 for the new unit so I popped to Volvo and paid £180. Enjoy your ko-fi 😃
@bobsko
@bobsko 5 ай бұрын
Very, very helpful! Do you know what is the whistling? One would think that its the air blowing through the broken membrane, but then opening the oil cap should amplify it even more as the air flow is now unobstructed
@michaelhuerta1490
@michaelhuerta1490 2 жыл бұрын
Thanks for your help, it was very useful!!! Greetings from México City!!
@patkelly7999
@patkelly7999 4 жыл бұрын
Good job Gerard, well explained, very clean engine bay on that car:)
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Cheers Pat, 🙏🙏 thanks very much
@mbvalency
@mbvalency 4 жыл бұрын
Had that failure on my Volvo S40 II 2 years ago (model year 2005 - engine had about 125.000km). The Volvo dealership was not very helpful. After diagnosing the problem myself with the help of the internet, I was looking for a reasonably priced oil filter housing, but they are always quite expensive as new parts. Through some internet forum I got the hint for a replacement seal - not from Ford, not from Volvo, but from some small shop in Russia... ordered it for about 30€, waited 2,5 weeks and after that, replaced the seal with the oil filter housing still mounted to the engine. It was fiddly, but afterwards, everything was as it should be.
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
If the cap is removed safely and has no damage to it after removal, then there no issue with diaphragm type repair. Should the cap become damaged it is most likely a whole assembly replacement. I have not found any caps for sale separately. Good job in diagnosing the fault yourself 👍
@joserafaelgarciadelcid6776
@joserafaelgarciadelcid6776 7 ай бұрын
Thank you, I learn too much with your explanation. Salute.
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 6 ай бұрын
🙏🙏
@trebor1973j
@trebor1973j 4 жыл бұрын
Great video that's 1 clean engine bay
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Thanks Robert, it is a well looked after focus 👌
@alanhoward6553
@alanhoward6553 4 жыл бұрын
Had this failure on Astra H replaced rocker cover great video thanks!
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Cheers Alan, I am delighted you enjoyed the video. I appreciate the comment 🙏
@patrick-rockford6758
@patrick-rockford6758 3 жыл бұрын
thanks! Very informative
@apollosport2895
@apollosport2895 6 ай бұрын
I changed this diaphragm on my T5 s40 and the issue is not solved Plz hlp
@brityn6514
@brityn6514 Жыл бұрын
Very informative cheers
@pauldjerassi620
@pauldjerassi620 4 жыл бұрын
Thank you a great teaching video.
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Thanks for the kind words Paul 🙏🙏
@petert696
@petert696 4 жыл бұрын
Brilliantly done.Thanks
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Thank you Peter
@lojzekiki8572
@lojzekiki8572 11 ай бұрын
I just discovered a clogged PCV valve on my 2008 Volvo V50 1.6d. I only bought the car 3 week ago with 275.000km (170.900mi). The whole engine is dirty from oil. Approved and official mechanics basically told be to scrap the car or replace the engine. Does anybody think there's any other way?
@stephenmorrissey1254
@stephenmorrissey1254 3 жыл бұрын
Would you recommend replacing the just diaphragm as preventative maintenance? On my Volvo C30 2.4i the diaphragm cap is easily accessible without taking anything off.
@brianvinh7777
@brianvinh7777 2 жыл бұрын
Great info
@djameleddine1205
@djameleddine1205 3 жыл бұрын
Thank you so much for the informative video. My 1.5 ford tdci engine smokes bleu just when the engine is warm. Two barres in the dashboard temperature gauge. Is due to the EGR. PCV or piston rings. No smoke when engine is hot. 85C•. Any idea ? Thank you .
@amana1480
@amana1480 3 жыл бұрын
Good video
@moonglow1158
@moonglow1158 3 жыл бұрын
How do you get the oil drain hose out of that oil sump that sits right under the pcv oil box on the volvo 240? Without dropping the pan ?
@djmariomar
@djmariomar 4 жыл бұрын
amazing info thank you
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Thanks Mario
@ga21973
@ga21973 2 жыл бұрын
What do you recommend to clean the engine? Removed assembly and a lot of crud/sludge in holes.
@martynwaters2358
@martynwaters2358 3 жыл бұрын
Super thoroughness! Sherlock Holmes and Motor Man in one, not to mention step by step tutorial.
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 3 жыл бұрын
❤️❤️🤗🙏🙏 Thanks a mill Martyn, you are very kind to say. 🙌
@tr1cky967
@tr1cky967 2 жыл бұрын
My focus st has the exact same fault code but does not make that noise what can be the problem? There is some oil laying on the oilfilterhousing aswell😕
@jordanpillay8611
@jordanpillay8611 3 жыл бұрын
Thanks I thought it was my Ford focus st mk2 piston rings
@bahcoboy7690
@bahcoboy7690 3 жыл бұрын
How much that whole replacement cost? Any cheaper parts to just replace?
@luischavez1307
@luischavez1307 Жыл бұрын
Would this cause the check engine light to come on????
@ksigns04
@ksigns04 2 жыл бұрын
Are there any of the same diaphragms on ebay for sale
@paulthepainter2366
@paulthepainter2366 3 жыл бұрын
That was so informative and helpful i subscribed even though i don't own a car like this
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 3 жыл бұрын
Thanks Paul, it's very much appreciated.
@stevebasanyi4374
@stevebasanyi4374 3 жыл бұрын
Great info! I have a volvo s40 2.4i, with looks like the exact parts. I actually just replaced the diaphragm for about $25. After the fix, which did have a torn diaphragm, the engine still has suction on filler cap and dipstick. Is this normal?
@TheMarcQ
@TheMarcQ 3 жыл бұрын
see robert dyi's videos about it. Do a glove test - cover the filler hole with a glove and if it's being sucked in - you are ok. If the glove is getting glown up you have a clogged system.
@amana1480
@amana1480 3 жыл бұрын
@@TheMarcQ Hold on... I thought suction at the cap is bad? In this video it's showing suction is bad?
@michakoza5687
@michakoza5687 5 ай бұрын
Great stuff! Thank you! Was the suction from the oil cap gone after the repair? Or is it normal and just the whistling was a symptom?
@mitsuevo8mr
@mitsuevo8mr 5 ай бұрын
I replaced mine I made sure i installed it the same way it came out! Howling gone but still getting suction at the oil filler and dipstick! I'm thinking just replacing the entire oil housing!!
@michakoza5687
@michakoza5687 5 ай бұрын
as far as I understand it so far, after watching a ton of related content (mostly about volvo though) some delicate suction is required. This is what seals the membrane.@@mitsuevo8mr
@RGD-Repairs
@RGD-Repairs 3 жыл бұрын
What are the symptoms of a failed PCV? I have a focus mk2 1.6 tdci. cheers
@TassyDeval
@TassyDeval 2 жыл бұрын
U will get a noise that sounds like a dry bearing, but its that pcv valve trying to fool you.
@UncleJuulian
@UncleJuulian 4 жыл бұрын
Is this fix for all t5 motors including the AWD models as well?
@danellul2963
@danellul2963 4 жыл бұрын
Believe so mate
@RayMainBagpiper
@RayMainBagpiper 3 жыл бұрын
Just curious.. I replaced the diaphragm and now my 09 C30 smokes out the exhaust. Any suggestions ?
@dream4Acupcake
@dream4Acupcake Жыл бұрын
If it turbo. Then start there.
@neillas
@neillas 4 жыл бұрын
Are there any option for cheaper solution on volvo T6?
@maoinc13
@maoinc13 4 жыл бұрын
What year ?
@unknow5245
@unknow5245 2 жыл бұрын
Hi I have the same problem with a focus st mk2, it sucks and when hot it starts to whistle and by unclogging the oil cap the whistling stops except that although I have changed the membrane it is still the same phenomenon of heavy suction and hot hissing some idea what else can cause this please I'm desperate :(
@user-uf6gc1nd7e
@user-uf6gc1nd7e Жыл бұрын
Hi, just wondering if you ever got it sorted and what was the fix?
@musicandvideosfor...
@musicandvideosfor... 7 ай бұрын
did u fix
@paulmonkton1227
@paulmonkton1227 9 ай бұрын
What engine is this on
@LukasLife01
@LukasLife01 7 ай бұрын
Would a bad PCV valve cause oil consumption
@valentinvsk4621
@valentinvsk4621 6 ай бұрын
yes. if it's stuck on open it will cause oil consumption and misfires
@LukasLife01
@LukasLife01 6 ай бұрын
Brilliant, thank you, just changing the rubber would be enough to solve it?
@gegwen7440
@gegwen7440 4 жыл бұрын
That oil filter looks a real pain to replace in situ ?
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 4 жыл бұрын
Yep, not that nice 🤦‍♂️
@Dracasethaen
@Dracasethaen Жыл бұрын
So I have been wracking my brain for like, a year, trying to figure out why when we replaced the PCV oil trap on a 3.2L volvo, it now "honks" from the PCV diaphragm, either coming off the brake or just while idling, about every 5 seconds. The sound is for sure coming from the diaphragm of the replacement, and even replacing the diaphragm on the replacement oil catch a second time, we get the same thing. The design on those is even simpler - press cap, rubber diaphragm, and a single coil spring, there's an inlet (outlet?) under the diaphragm to the side of the central outlet(Inlet?), and then the central outlet(inlet?) -- any thoughts on why that all may be? It's been hell even trying to get an answer out of Volvo and they're the ones who built the dang things.
@biachpiach
@biachpiach Жыл бұрын
same problem with xc9o v8. strange pumping noise i replaced the whole pcv!! no change. tjere is not much to clean neither, pcv there just regulates vacuum. i have now v8 that gjves darthvader breathjng sounds. could you solve tour problem and can share some tips? i have a large vacuum suction in dipstick and oil cap so vents i side engine should be ok as vacuum is reaching both down and top of the engine.
@Dracasethaen
@Dracasethaen Жыл бұрын
@@biachpiach I've posted elsewhere on this, but if it's still making a 'honk' (like a goose or duck) then the pcv replacement you received did not have the diaphragm fully seated from the supplier you bought it from, you may need to make a jig to clamp it on more firmly in a vice, it takes a lot more force than expected seating those properly. Darth vader sounds I'm not familiar with, the v8's have a slightly different setup than the 3.0 or 3.2 Si6, but other seal failures can affect it. Also, suction at the dip stick is good as long as it's not a really hard suction. Usually if a pcv is bad you'll see oil foaming on the dipstick, or smoke blowing out of the dipstick neck when you pull it out. Sorry I can't help more than that without being hands on, it's finnicky tracking down pcv issues on most of these cars
@biachpiach
@biachpiach Жыл бұрын
spoke with a volvo service, guy says there is oil trap box, that rarely anyone replaces. it can be partly blocked. what helped too mas right rpms at idle. i had misfire code, replaced coil, rpm went up and less noise now from PCV. i also replaced seals on dipstick and oil cap. next i will replace seal under oil cap(is some form of plastic neck attached to the valve covers). so basically i go through sealing out all vacuum leaks. my theory now is that slight leaks reduce vacuum, pcv opens a bit then closes fast making the sound. since leak is small and suction is good it "pumps" in an on/ off fashion. probably pcv is not calibrated to work with this tiny leaks to stay just a little open and it cycles through
@balaguru1583
@balaguru1583 4 жыл бұрын
Sir, where is the pcv valve located in ford aspire
@nishantdhiman2818
@nishantdhiman2818 2 ай бұрын
U got it
@jonathancahill9861
@jonathancahill9861 3 жыл бұрын
This doesn’t solve the issue - what causes the diaphragm to split? The system is clogged - this solves the noise but this pressure will eventually blow the seals if you don’t replace the unit :P
@subikazaferi1501
@subikazaferi1501 8 ай бұрын
I don't really see where the torx go in
@gotj
@gotj 3 жыл бұрын
Why do you disconnect the positive instead of the negative?
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 3 жыл бұрын
??
@gotj
@gotj 3 жыл бұрын
@@GerardBurkeBurkesGarage The battery negative is right there in front and closer to you, but you instead chose to disconnect the positive... I wonder why?
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 3 жыл бұрын
@@gotj the negative is at the back
@gotj
@gotj 3 жыл бұрын
@@GerardBurkeBurkesGarage OMG. I forgot to take the medication LOL. Cheers.
@GerardBurkeBurkesGarage
@GerardBurkeBurkesGarage 3 жыл бұрын
@@gotj all good, 👍 it happens to us all 😁
@jasonl5523
@jasonl5523 2 жыл бұрын
Good info but you don't have to completely remove it.
@itsskytex1657
@itsskytex1657 3 жыл бұрын
this shitty thing (diaphragme) kosts me the second time 250€ for my volvo?! nice
@maoinc13
@maoinc13 4 жыл бұрын
Why you didn't change only the diaphragm ? It cost about 23 dollars with shipping and handling ..
@daniel.s8126
@daniel.s8126 3 жыл бұрын
Clearly you didn’t watch the whole video 🙄
@amana1480
@amana1480 3 жыл бұрын
6:10 It's not a good idea to throw the plastic cover on the floor... they can crack, they are very expensive, and on older cars they are impossible to get new from the dealer anymore...
@tonysuley4306
@tonysuley4306 Жыл бұрын
The diaphragm is £2.30 but the customer wanted the complete housing £250 what a pratt
UNO!
00:18
БРУНО
Рет қаралды 3,4 МЛН
Nastya and SeanDoesMagic
00:16
Nastya
Рет қаралды 44 МЛН
Sigma girl and soap bubbles by Secret Vlog
00:37
Secret Vlog
Рет қаралды 15 МЛН
Volvo T5 Timing Belt
10:43
Angel Car Care
Рет қаралды 177 М.
Top 11 Symptoms of Bad PCV Valve
6:24
Mechanical Boost
Рет қаралды 490 М.
How to: Volvo C30 S40 V50 C70 CEM Removal and Cleaning
6:54
4DIYers
Рет қаралды 235 М.
Air Filter Box Easy Removal on Volvo S60 2009 and Up
4:24
Motorcarnut
Рет қаралды 14 М.
Volvo P1 S40 Oil Change Service DIY (C30, C70, S60, V50, V60)
14:17
PCV Valve / Breather Replacement | The Easy Way  - PEUGEOT, CITROEN, FORD
11:08
Mr RanDom Adventures
Рет қаралды 110 М.
ipd Volvo - PCV Breather Box Assembly - P1/P3 5 Cyl Volvos
5:20
IPD The Volvo Specialists
Рет қаралды 58 М.
تعطلت دراجتي بسبب هذا المشاغب😵‍💫🥴
0:28
Cool Tool SHORTS Arabic
Рет қаралды 262 М.
ОПАСНАЯ ВЕЛОДОРОЖКА СТОЙ ⛔️
0:18
Леха МАК
Рет қаралды 1,4 МЛН
How To Escape A Car Trunk 🤔
0:27
Zack D. Films
Рет қаралды 40 МЛН
Manual installation process of highway guardrail
0:15
mianxiwei
Рет қаралды 54 МЛН
T55 Narxi 23 900$ 📞95 155 03 00 | 📞91 033 03 03
0:18
China Avtouz
Рет қаралды 8 МЛН