UPGRADING OUR MINI JEEPS TO LOOK LIKE REAL JEEPS

[@crwln93]

These boys were raised right! They have a copy of Granville King's Jeep Bible in the shop. 😎👍

[@redneckcomputergeek]

Love the underhanded call out Grind hard build intro! 900% agree on the make it look real not just just a slapped on cut up ATV.

[@robsmith4651]

Congratulations on hitting over a hundred thousand subscribers. Good work guys.

[@gregtennyson]

It’s wild they don’t have more subs. One of the best off-roading channels on the tube

[@MarkoMygun]

Holy Flip ,I say starting out the new year that you guy's put out 2 videos a week Pure DEAN 👌 Thanks for this one I've Had It.

[@pedrobarillas2809]

Think you fellas might have the pipe bender dies upside down. I think lol you guys seem like genuine friends, fun to watch .

[@lukegraham701]

Yeah, the smaller die likely goes opposite the loop that holds the tube. lol

[@Cusackkkk]

They're brothers

[@jaylyn2121]

Yeah they are brothers. And hilarious

[@svtford4212]

You guys are my kind of people. Love the channel. Keep up the awesome work.🫡

[@bobbymulwee7641]

The lights do look a little big but it fits the vibe of the mini Jeep's. Both have a cartoonish style to them and it's all looking rad.

[@Cusackkkk]

Here since the start. Crazy seeing the growth! Peck bros deserve 1 mill subs if not more. Legends

[@InfamyAutoTowing]

Every Sunday is awesome! I looked forward to it but a surprise vid here and there that would take the cake!

[@ThatsKap88]

This is turning into my new favorite channel on KZbin. I realize that the channel's not new I've been watching Peck Brothers for a couple of years now in off-roading comps and catching a video of theirs here and there. But once you throw a mini Jeep into the mix all bets are off.

[@kellyclasen1667]

Every Sunday morning, you guy’s videos is the first one I watch out of everybody you guys have great entertainment with stuff you guys fabricating build is awesome. Can’t wait till next Sunday.

[@bripslag]

I always save Peck Brothers for the end of the night. That way I can go to sleep with a smile on my face. 👍🏼

[@bowtierj]

So badass, you are about to just blow up. Good for you guys such amazing attitudes and work ethic. Your parents are prob so proud of you boys.

[@charleswelch249]

I'm glad you got heat in your shop. That's very important for everyone. Also, you need to check out Robbie Laton, and and have him take pictures and measurements of his pipe bender. Then take all your stuff and make something actually usable. The mini jeep builds are really cool and coming along nicely.

[@shawnkane7152]

Congratulations on the 💯,000! Yous have earned it!🇺🇸🙏

[@IsaacSwift-uc7jq]

Love the videos guys! The mini jeeps are awesome! 🔥💯

[@Blacksheeprc2024]

Feed the bender from the front instead of the rear ....😂

[@cedricbroussard8738]

The jeeps are turning out sick! Keep up the awesome work 👏

[@Kevin-ti3rz]

Sean was Paul at Fab Rats camera guy. They do farm builds and family stuff . The heater they built is cool Because Propane is pricey and yall love going out and getting firewood.

[@Jamie-vl8yq]

I love you guy's always a good time watch your antic's 😂😂.

[@AlaskanCharlie]

Those are going to be a blast when you're done with them.

[@thomastrussell7438]

Let’s go boys! No more frost bite for the win!

[@Dobermangang10]

Brady is wearing a Pure Dean shirt while working on a tube bender that’s Egg Salad 😂😂

[@desviooffroad5876]

A couple of KC HiLITES Dual FLEX LED Lights would be cool for headlights. Set them up for low beam and high beam. Well, not actually low beam and high beam, but beam and flood 🤙🏼

[@garyidaho1]

My face is in a perma-grin during your videos. You are great brothers. Next summer I’ll make a trip to Preston from Blackfoot to meet you guys. Keep making great videos.

[@brandonbaldwin6845]

Good morning! Loving to see the growth since 100k, I knew it would get going faster! You guys are top notch!

[@MATTHINELINE-pn5ib]

Sunday morning youtube first watch every Sunday

[@dabosssr24]

congrats on the 100k subs guys. been here since about 8k subs. "keep on jeepin on"

[@moxieoffroadtv]

So proud that you guys hit 100k. Congratulations brothers! Y'all are well deserving young men.

[@thejourneyretold]

Once you have a heater the whole game changes. Sometimes the shop is warmer than the house even. lol Bluetooth thermostat is the next step!

[@savage6394]

I'm pretty sure they have the Bluetooth thermostat. Alex looked like he was controlling it from his phone when they were first firing up the heater.

[@patricksjeeps]

Duuuuude. Those are flat fenders. Put round tail lights on it! The cheap round trailer lights at the parts store are almost a dead ringer for OE flatty tails.

[@fransinyard891]

Good morning sunshines! I love the way y'all get along! Y'all have me laughing! Much love and respect from Henderson Ga USA

[@joebock4571]

Should put Willys on the back since they are made to look like the old flat fender Willys jeeps.

[@davestevens4263]

I just woke up & always laughing my azz off watching yall !

[@fateheise7202]

Per your fireplace.. plumbing in combustion air to it will make it work muuuuuch better!! Good work fellas!

[@justincoats7236]

Great work. It's always fun to see the progress.

[@bitten4life78]

Looking great fellas the only bad part is literally waiting for the next video to drop can't wait for the next best jeep channel on KZbin to drop you guys are awesome keep crushing it.

[@johnnykirkland611]

Good morning brothers and dad 👋

[@squishybushlaplant6166]

You guys have great content keep it up !! Good way to start the morning ! One of my favorite new KZbin channels

[@Kevin-ti3rz]

Y'all make me smile ✓✓ . Nice salute ✓

[@tonyparson4392]

Yes, that’s exactly where I would hide if something is about to explode right behind a welding bottle. 😂😂

[@FORCE_PBC]

I’d hit up dude from Dirt Lifestyle about your bender issues, something tells me he can get you what you need. If not him try Shawn from 89 built, or Paul Cox. 50 racks seems a touch high. Eastwood has a .120 wall bender for about 2500. But I smell a sponsor… I hope you figure it out to make your job easier. Have a good week fellas. 🤘

[@scottstone4948]

Nate Pickel from Dirt Lifestyle has some serious skills.

[@FORCE_PBC]

@ runs a little short on personality, but you can’t have it all I guess.

[@squiggyg.8415]

If you’re new here, sometimes one of them shaves their facial hair and then you can tell them apart 😎 And they usually have to redo everything, usually more than twice

[@StormbornJKU]

That could not possibly be more accurate! 😂

[@UltimateToyTrader]

😂 true… the do-overs are what makes it great. Keep it up boys, great stuff!

[@travelll1602]

I sure was wondering like what the fuck they just posted the same video three days ago right along with grind hard… 🤦🏾‍♂️

[@BD-we4lz]

Instead of the Carolina Squat, those jeeps have the Utah Squint with those headlights 😂

[@brianjacobs1241]

I already new you were going to hit 100k YOU GUYS WILL HIT 500k FOR SURE

[@justincoats7236]

I hope so. Then the stuff they could go after would be so much bigger. That would be fun.

[@graysonbathurst7577]

Good night from Western Australia 🇦🇺

[@davestevens4263]

No ! Good morning from commifornia ! A beautiful winter morning, only 48 f for a low .

[@KalijahThompson]

Good morning from central america

[@Cusackkkk]

2:30am here on the East Coast of Aus near Sydney. Hoping one day i can move to the beautiful Western Aus 🤞🏻

[@MrRainHere]

Good night from India🇮🇳

[@Magros16]

yall should build a tiny home for the mini jeeps to pull for a camping

[@periwinkle-dragonfly]

Y'all never fail to entertain!!

[@JeepTJay6]

10:27 He knows you guys too well. That just brother proofing. 😂🤣

[@BeckySayre]

Roll cages would make them look sweet!

[@justincoats7236]

I was wondering if that would make them safer or more deadly? Would they have to be so high to clear their head that they looked weird?

[@BeckySayre]

@@justincoats7236 Caleb would probably be ok. Alex might have an issue.

[@bobbyfisher6343]

Roll bar next

[@domfrederick3911]

When you do you pipe bending fill the pipe with sand make cape to fit perfect on the pipe ends fill the pipe with sand and then try bending the tube it will work a lot better and it won’t look crumbly

[@Lucifer6662dr]

cant wait to see them all pecked out lol

[@tomcourneya5863]

That tubing bender is most likely made for metric tubing. Make the holes where the pins go through larger for ease of adjustment.

[@YamahaYz250]

Absolutely Hilarious 👏🫡

[@brianyazzie4538]

OH MY GOD I CAN'T WAIT TO SEE THEM GOING OFFROAD AND ROCK CRAWLING!

[@jeffl5785]

A radiant tube heater would rock there.

[@johnandress1233]

I love the tail lights, have you considered Frenching them in so the are flush with the aluminum panel.

[@offroad1911]

Conductive heat in the floor would have been the bomb. My garage isn’t as big as your shop but it’s nice to lay on a warm floor.

[@im_ur_huckleberry8998]

The tubing bender was kicking your butts😂. I think you were possibly feeding it through the wrong side

[@Celternix]

Im surprised you guys only got 100k subscribers. I make sure to like every video because you guys make awesome videos. I feel like you guys are super underrated.

[@Natepluskristen]

Full on legends!! Keep it up 🙌

[@wilborn95]

You guys should single axle swap the 500! That would really sell the mini jeep idea

[@TraditionsLawnLandscape]

Lets go glad to see the progress

[@bobbyfisher6343]

I’ve been in the propane industry for 40 years, ya’ll should have installed a propane radiant tube heater, cheaper to operate, the hanging heater you have heats the air once that garage door opens all your hot air escapes, the tube heater will heat the objects

[@twinturbo3374]

Future episode will be the Peck Bros tearing out this heater for the one you suggested. Pure Dean! 😂

[@mikemccabe7124]

tape up the bottom of your tubing then goto a playground and fill the tubing up with sand afrer stopping a few times and smack the tube so sand packs down good then carefully fill it with water and tap on it as the water goes in so it goes down then rape up the other end real well and bend away with it.. itll keep it all the same roundness so wont crush in the bends, it'll give you flawless bends thruout your cage cuz the sand prevents it from looking like you didn't know what you were doing.. just make sure you empty it out as soon as ur done bendinh it and let it dry out really well and you'll always have urselfs some professional looking cages.. O and make sure you rerurn the kiddo's playground sand and now u know one of the tricks of the trade, keep it secret or educate people with ur new found knowledge that always works 100% everytime..lol

[@justincoats7236]

You guys went from 100k subs to 108k in 10 days. You got to be excited.

[@YamahaYz250]

17:11 Sounds like a Machine Gun! Lmao 😂

[@Zaafgguggrw]

Brady having a face shield on but not covering face... ok I've done that to😂

[@wayneullman5079]

You need a shirt with “Literally -Pure Dean All Churched Up”

[@BustedtoBuilt]

Enjoy that heat! Hardworking guys like you deserve to see it pay off! Keep up the great content!

[@annmurphy5507]

GOOD MORNING from Texas!!

[@papatomsthoughts]

You guys make my week. 😂😂😂😂😂😂

[@tomcourneya5863]

You can also use your tubing dies in an arbor press until you can get what you want.

[@tracyb8193]

I would like to see y'all at Matt's Off Road games. I really enjoyed seeing you there last year. Hopefully you want have a Ford problem thus time 😁

[@Islandboii242]

Yall boys is the only reason I be in youtube

[@bigyan4658]

Já faz um tempo que assisto o canal em inglês agora com tradução ficou nota 1000 !!!! Obrigado pela inclusão!!❤

[@RMM--uv7uk]

Use small square trailer lights. They would match the size way better.

[@jasonbarrett7756]

What makes me laugh the most is yous got heating in the shop now and yous are still putting logs on the fire pmsl well done guys love it 😂😂😂

[@timtaylor3393]

There's more to life than being first!

[@wirebrush]

You guys need one more. I think you need to get your hands on one of those gigantic Russian 4 wheelers to convert into a "Jeep". A real CJ3 body would probably fit on it

[@Double.A.Ron23]

I've been waiting for this upload

[@FrankDeMaria-te2ee]

Congrats with the heater. I worked 3 years in a new car dealership that did not have heat in the shop. No fun in the winter for sure. The owner was too cheap to buy a heater, so we froze all winter.

[@jerichogrindley2479]

-37 here in FSJ, BC, Canada

[@mattgallizioli5978]

You guys crack me up! Weekly just a question when in the BLEEP are you gonna finish Brady’s jeep. Quick spending money on heat and toy’s and flipping finish it!! Thanks for the laughs

[@maxblankinship5003]

Thank you guys

[@423gamble]

Take and inset the lights so they don't stick out so far and they would look a lot better and not so bulky. Either way I like it!

[@rightwingmanscott]

Hard to believe you worked in the cold like that! My shop has radiant tube heaters and its hard to beat them. Luckily I don't have a tight wad brother that thought coveralls would be cheaper!

[@hunterhutt75]

Peckbrothers mini jeep VS grind hards mini jeep

[@justincoats7236]

That 1000cc machine is going to be tough to beat. It's a near RZR to start with. I'm excited to see how 1000cc compares to the 500cc.

[@roberterzen1510]

Either way it'd be awesome to see 😮

[@aaronfirth3559]

Gotta grease the skid steer boys

[@Jon-wg8vr]

Nice pull using the movie, hot rod not many people know of this movie, but she is a beaut

[@Raztc]

PUT A TURBO ON IT!!

[@richgwozdz8580]

Eastwood tools sells a really good pipe bender that is very affordable compared to others on the market

[@P.Trim69]

This is the only time i will ever say i love watching them 3 Pecker's. There the best. We love them Pecker's. From ur ole hillbilly buddy. Lol

[@jasonpetrich4141]

You know what you need now, You need to take some of those enclosed galfcart bodies and cut em up and make 2 hard tops. Bout the only thing there really missing amd I would do some nilight 7 inch pod lights for head lights they come with full harness and switch for like 30 bucks.... there awesome

[@BrandonMiller-l6b]

When are we going to get videos building Brady’s jeep?

[@ajk.4587]

earlyyyyyyy, love the jeeps

[@quig89GMC]

You had me at free duck.

[@berettaboy442]

Those benders will serve all your needs, you just need the proper dies and followers, that follower should be up higher and hold the rod level

[@scottotto124]

Your videos are fun to watch 😂

[@dannydavis2046]

You inspired me to dig out my original copy of Granville King’s Jeeper’s Bible autographed by Granville and Superdawg.