Pedalboard Walkthrough 2024 | Dual ToneX (UPDATED)

[@alexheltemes]

1981 lvl reminds me of what the em drive does when everyone was in love with that pedal like 5-10 years ago. Funny how gear circulates in ways. Great tone! Great video!

[@SamWittek]

@@alexheltemes Haha so true!!

[@abang02]

I was thinking the same thing! I still have mine on the board.

[@michaelsaba6172]

Great video! I purchased a DISO+ after watching your last pedalboard video. Didn’t realize how much I needed a line isolator. Thanks for the walkthrough and keep up the good work!

[@SamWittek]

Nice!! Glad you're digging the DISO+, it really is so so good 🙏🏻

[@LikeU2tributeband]

That HP-2...man Sam, I like it! Nice to see and learn new pedals on yt! Great board, sounds, and guitar! Thnx for sharing!

[@SamWittek]

Thanks man!! Yess, loving that HP-2, so much fun!

[@chrisclark5135]

Dang it Sam! Every video you drop, somehow I go in debt! Also, I think there’s another channel out there where the guy uses your guitar (and livingroom too! Unless you have two channels 😂😂)

[@SamWittek]

hahah sorry man! 😂 And nah I just have the one channel lol! I'll have to keep an eye out

[@33shoobs]

Best sounds yet. Digging it

[@SamWittek]

@@33shoobs thanks so much! 🙏🏻

[@atticuscrowley]

the way you’re using the morningstar and the exp slider is so cool! and the tones are great as always!

[@SamWittek]

Thanks so much! 🙏🏻 That little exp slider is so cool!

[@2speedy4u22]

Swapping out a Lambertone? Are you still a Christian?

[@SamWittek]

Hey I still have one! That means I'm still good.... right..?

[@2speedy4u22]

@@SamWittek maybe. But you’d better keep that reverb mix good and high to be sure.

[@MARCOSVINICIUS-uz9ht]

😂😂😂😂😂

[@ryanpappenfuss]

This thread has me 💀😂

[@SamWittek]

@@2speedy4u22 For sure. I also made sure to have chick fil a for dinner just to be extra safe 🙏🏻

[@beauruutz]

Super keen to what's next!! 🙌

[@SamWittek]

🙌🏻🙌🏻

[@masterWindu_01]

Surprised you have the Lamb off your board already! I just got one and I’m blown away!

[@SamWittek]

I rocked it for a couple years! It's so so good, my drive pedals are just constantly rotating haha, wouldn't be surprised if it got back in the rotation

[@masterWindu_01]

@ didn’t realize you had it that long haha. I’d probably try a different one after that long too! It is a great pedal though.

[@pinstripe_pedals]

Thanks for taking us along for great tonez!! 🥳🥳🥳

[@SamWittek]

Thank YOU!! 💪🏼

[@Packett1364]

Great sounds as always!

[@SamWittek]

Thanks dude! 💪🏼

[@_LeftisRight]

Love it bro! Sounds killer

[@SamWittek]

Thanks Josh!! 💪🏼

[@ruvchbrevth]

Great video dawg… 🔥

[@SamWittek]

Thanks man! 💪🏼

[@ruvchbrevth]

Gonna use those Julianna settings! Been struggling over a vibrato tone.

[@SamWittek]

@@ruvchbrevth Nice! Yeah go for it. I actually had the rate up a little higher than normal, I think I knocked it when I was getting set up for the vid. Usually I have the rate around like 11 o clock-ish

[@ruvchbrevth]

@ thanks dawg, I’ll try it! 🙌🏻

[@joehazen7996]

Great stuff! I adopted a middleground way of running your patches for the timeline and big sky. I do make song-specific patches with my ML6 mkii, but just rotate between your 1-2-3 patches, so programming is much easier. I also use an ML5, so I don't even have to trigger my drives. Your board has been by far the most inspiring for my tone hunt, great job!

[@SamWittek]

Love it man! That sounds like an awesome setup. Thanks for rocking the strymon presets! 🙌🏻

[@Ubi-o]

This must be a worship guy. The min I see strymon on a pedal board I instantly know this must be a worship leader at a church.

[@SamWittek]

It's in my contract

[@NicCrittenden]

Idk what it is about the TF captures.. but jeez🔥 also, that fuzz tone is filth🔥

[@SamWittek]

They're so good! And thanks man haha 🤘🏻🤘🏻

[@Peace-bx5dh]

same here, i tried Crema and Grinder on the bridge pickup, then 3 years ago i put Lindi Fralin PAF , and since then, im happy with it.

[@SamWittek]

I was close to grabbing a Grinder. I'd still like to try one at some point but man, these Fralins are amazing ❤

[@ryanpappenfusshhs]

@@SamWittek I have an HH tele with Crema neck and Grinder bridge, lethal combo! Plenty of girth and clarity from the Grinder. But, if you're happy with the Fralins, keep them as is.

[@SamWittek]

@@ryanpappenfusshhs Nice! Sounds like an awesome combo, I'd love to try a Grinder at some point! Really digging the Fralins at the moment though

[@MichaTulik]

Top level tones!

[@SamWittek]

Thanks man! 🙏🏻

[@antonioflores8173]

hey bro, a little late to comment on this video, but i’d love it if you could share your julianna settings! sounds crazy good 🙏

[@SamWittek]

Thanks man! Yeah absolutely, if you skip to around 11:34 and zoom in you can see all the settings there. Hope that helps!

[@andreasangel6035]

What happened to Limelight ? :) You are a natural teacher Sam! Love your content 👌

[@SamWittek]

Thanks so much! 🙏🏻 Limelight is on the bench at the moment! I have it on a smaller demo board with a couple of other drives

[@andreasangel6035]

@@SamWittek I see, what was the reason for it’s time out? :D

[@SamWittek]

@@andreasangel6035 Just trying out some other drive options! Wouldn't be surprised if the limelight made its way back on the board before long lol

[@andreasangel6035]

@@SamWittek haha I see :) You are my inspiration Sam, keep it up 😉👌

[@SamWittek]

@@andreasangel6035 Thanks so much! 🙏🏻

[@davidoliver3589]

Hi Sam. Sounds fantastic! Your tone has a punchy crisp sound. There’s a nice clarity to it. What elements contribute to this the most? Is your compressor? Tonex patches? Keep up the great work! Dave

[@SamWittek]

Thanks so much Dave! It's definitely a combination of a lot of things, but the guitar + amp (or in this case the ToneX) contributes the most to the overall tone. Then things like compression, other pedals, etc just are the icing on top. Hope that helps!

[@worshipg8875]

QC preset in the future wooooohhh!

[@SamWittek]

Haha I'd love to make presets for the QC at some point, gonna be focusing on some of the Line 6 stuff first though 👀

[@seanbatterberry]

That Chroma Console is 🤤

[@SamWittek]

Love the Chroma Console ❤

[@CamachoLeonardo]

Very nice 🎉

[@SamWittek]

Thanks! 🙏🏻

[@aaronconant5378]

Hey Sam, great video man and amazing tone! I just purchased 2 Tonex One pedals and I was wondering how to set them up in stereo after my reverb?

[@SamWittek]

Thanks man! Yep so you'd just go Left out of your reverb into one of your ToneX Ones, and Right out into the other (assuming you're using a stereo reverb pedal)

[@desguitaresetduson]

Nice ambient tones, the Edge inspired, but with your personal touch : well done ! Probably, you 'll need to add a Morningstar ML10X to your config, but that's another story 😉 Nice pedal selection, good sounding guitar too, and interesting chords as well...

[@SamWittek]

Thanks so much! Haha yeah we'll see about that 😂 I'm pretty happy atm though with the level of MIDI integration. Doesn't feel like it's too much where I'd feel restricted, but is able to control enough where it simplifies things for me!

[@AngelSanchez-om8fs]

On the Julianna demo what song is it ?

[@SamWittek]

All Hail King Jesus!

[@annasensenig]

LETS GOOOO 🔥🔥💯💯

[@SamWittek]

💪🏼💪🏼💪🏼

[@ThatMexicanGuyInUSA]

Very nice video update bro! I've always liked to watch your videos... what is the input trim on your ToneX for TF captures?

[@SamWittek]

Thanks so much man! 🙌🏻 These advanced captures are a little different from their regular ones, and I believe these were intended for the input trip to be at 0 if I remember correctly. I either have mine set to 0, or I may have even bumped it up to like +2-ish. I always run their regular captures at +8.5 though

[@ThatMexicanGuyInUSA]

@ what do you mean with the advanced captures? How can buy them too? I have all TF captures and have never heard of these ones man…. Now I am intrigued… hahaha

[@SamWittek]

@@ThatMexicanGuyInUSAhaha you can reach out to Kenyon reed on Instagram and he’ll give you some more details, that’s how I ended up getting them!

[@Graham_the_musician]

Yoooo that’s crazy. why don’t you use the lamb anymore? Should I get a lion and lamb?

[@SamWittek]

I've just been gravitating more towards these drives lately! The lamb is still a killer drive pedal though. I haven't tried the lion so I can't give an opinion on that!

[@Graham_the_musician]

@ thx i just like programmable drive pedals cuz my board is tiny

[@SamWittek]

@@Graham_the_musician yeah that's definitely my fav way to use the lamb

[@daveeeeeed9201]

What amps do you use?

[@SamWittek]

Tonefactor's advanced captures of the AC30 and benson chimera

[@otnielioanca3729]

@@SamWittekis their a huge difference with advanced captures? And if so how do you get advanced captures bc I don’t see them on tone factor website

[@SamWittek]

@@otnielioanca3729 You have to reach out to Kenyon over on instagram, he can give you more details about the advanced captures. They're more or less the same, just dialed in more intentionally to prioritize the amp breakup. I really like the way they feel, but the regular stock Tone Factor stuff is also great

[@GrantDalton-d3x]

Love the ability to pull another page specifically for different presets on the Chroma Console. How do you set that up and is it exclusive to the Pro? I have the MkII and would really like to implement that to my own work flow.

[@SamWittek]

I THINK you should be able to do it on the mkII, I'm not too familiar with that though. I just set up another page with a handful of Chroma presets. The "Chroma" command on my home page just toggles me over to that page where I can toggle on/off any of those Chroma presets, and then I just have the "Back" command to take me back to the home page

[@GrantDalton-d3x]

@ awesome! Thanks for the reply! I really like some of the workflow ideas you have going on. Definitely gonna steal a few for my own rig 😂

[@SamWittek]

@@GrantDalton-d3x haha go for it! 💪🏻

[@topecaparida]

Hi Sam..Hope you doing well..just want to ask if are you using the tone factor TF BENSON - BREAKUP - 76D and TF AC30 6TB - BREAKUP - 76D??

[@erickdiaz6152]

Are you using Tonex Ones?

[@SamWittek]

Nah I'm still using the big boys 😁I might move to the ToneX Ones at some point, but I like the big box ToneXs a lot still for the tweakability

[@joshuaavery5310]

Sounds awesome bro! I’m building out my first real board and I’m really digging the idea of getting the MC6 Pro. Not as familiar with it, but looks like a great tool to have. Are you able to program more than 3-4 BPM’s for a set list (for like a conference weekend with multiple setlists)?

[@SamWittek]

Thanks man! 👊🏻 Yeah absolutely! You could get pretty creative with programming more BPMs for a longer set list. You have access to multiple pages per bank, so if I were needing to program more I’d probably just set up another page or two of BPMs. You can also just toggle over to the next bank if that’s easier too. Everything in the video is all on Bank 1. You could potentially copy/paste this setup on several banks and just change the songs and BPMs to reflect your set list. Just a couple ideas!

[@joshuaavery5310]

@ that’s great to know man. Thanks for letting me know! Super helpful going into my board build.

[@kyomaru7]

@@SamWittek For creating a setlist on MC6 with the above method, could I select one one the footswitch, tap in the tempo on MC6 and it would autosave? Then would I be able to always go back to that footswitch at any time after the song ends? Or do I need to go on the computer to pre-program the BPMs? Thanks!

[@SamWittek]

@@kyomaru7 Yeah you'd need to do it from the computer in order to save it permanently. I wish they'd build in a way to do it directly on the pedal!

[@WBird-dq9mw]

What drives the choice to put the ToneX at the end of the chain vs. somewhere in the middle (i.e. after the drives)?

[@SamWittek]

I have it at the end of the chain because they are acting as my "amps." You definitely could put them earlier in the chain if you prefer to run your delays & reverbs after your amps, but I prefer the sound of all of the effects going into the frontend of the amps

[@WBird-dq9mw]

@@SamWittek I only have a single ToneX One currently, so I guess I would lose stereo if I put that at end of chain. 🤔

[@SamWittek]

@@WBird-dq9mw Ah yeah, unless you grabbed a second ToneX one. Then you could run stereo amps (and your stereo effects into them)

[@4thewin759]

I want that germanium boost. How did you get it?

[@SamWittek]

It's killer! I just reached out to Ethan (Tone Ranger Audio) on instagram and he built one for me. Not sure if he's doing custom builds at the moment though since I believe he's in the middle of some big plans for his business. I'd reach out though if you're interested!

[@lucaromanoxyz]

Hi Sam, I also did a setup with the Volume X Mini Pedal DVP4 after the overdrive (Ibanez TS10), but a pedalboard technician told me that this volume pedal, being high impedance, goes after the guitar. He suggested me to replace it with a low impedance pedal like Boss FV-500-L. Do you agree with this update, have you ever tried the difference or do you think that even a high impedance pedal is fine there in the middle? Thanks

[@SamWittek]

Hey I haven't had any problems personally, but I know that a passive VP like this one can cause some tone suck. That's particularly why I go directly into a buffer first in my chain (and use several other buffered pedals throughout the chain). I've A/B tested going through my board vs directly into the ToneXs and I can't hear any audible tone loss so I'm personally ok with where my VP is at in the chain, but results will definitely vary depending on your setup. That's why you will see some people run the dunlop VP via expression out of a MIDI device, or a boost like the vertex boost so that it doesn't cause any tone suck. Hope this answers your question!

[@trentonwilker8741]

Did you change the EQ at all on the Tonex captures?

[@SamWittek]

Just a bit, I bumped the presence to 6.5 and increased the treble a little bit as well

[@danielplaysvioli]

Hey Sam! Amazing tone. For syncing tempo to your timeline with the mc6, are you sending persisting midi clock or sending timed tap messages (at the bpm, which would set GLOBAL tempo)? I’m trying to figure out a way to set the Global tempo in the timeline with my MC6 mkii. I’m thinking that the CC Waveform generator in the mc6 might work but are you using another workaround? In a previous vid you were using midi clock but in this vid I noticed that the Tap color was orange instead of green which I think means it’s not syncing to a midi clock

[@SamWittek]

Hey man thanks! I'm pretty sure I'm just sending persisting midi clock from the mc6 pro. I'm using the BPM set function and just made sure that I checked the midi clock persist box in the morningstar editor settings, so that each time I fire a new BPM it'll persist. Then on my timeline I just made sure to set it to global. As far as the difference in tap color on the timeline I didn't even notice haha, I haven't changed anything midi clock related in a long time Hope this helps!

[@danielplaysvioli]

@@SamWittek Oh gotcha that’s helpful! Whenever you’re switching timeline presets (while midi clock is still persisting), do you notice any audible glitching or ever see the bpm change on the timeline?

[@SamWittek]

@@danielplaysvioli Nah I haven't noticed!

[@danielplaysvioli]

Oh lovely! Thank you Sam! Keep up the amazing tones and content 🤘

[@hmn4466]

I'm curious about the Benson Preamp. How do you use it? I got a Carbon X (double BB) and thinking about stacking with the Benson but can't decide if Benson first or Benson on top of.

[@SamWittek]

Man I feel like I'm always changing how I'm using the benson preamp haha it's just so versatile. Right now I have it as more of med gain drive. As far as what order to stack, it depends what character you want to feel more pronounced. If you ran the benson after the carbon x, you'd probably get more of that benson character

[@Birdganggg52]

Do you sell BigSky settings ?

[@SamWittek]

Yep! The link is in the description

[@TerrenceC90]

How do you like TF captures in comparison to Tone Shepherd

[@SamWittek]

They're both amazing captures. The TF captures are a little darker which I kinda prefer, but the TS captures are great too. I really dig using those with the tele

[@Ocelot911]

sorry missed where are the two tonex pedal's located?

[@SamWittek]

Yeah sorry I meant to grab a shot of the ToneXs and totally forgot. They’re on a little mini board off to the side, it’s just the two ToneXs and diso+ on that mini board

[@pinstripe_pedals]

@@SamWittek Now we need a miniboard rundown! 🤠

[@timschultz2560]

are you able to run modulation and delay at the same time through the chroma console? Or is it a one preset at a time deal?

[@SamWittek]

Yep! You can mix and match any of the 4 modules and turn them on/off individually of one another. You just can't use 2 sounds from the same module simultaneously if that makes sense.

[@timschultz2560]

@@SamWittek that makes sense - thank you!

[@joaoandrade9313]

💯💯💯

[@SamWittek]

🤘🏻🤘🏻

[@saamipop]

Hi I have a question for morningstar mc6 pro and I could not find the answer anywhere. If you want to edit the BPM of those 4 presets song, do you need to go in the app to do that or can it be done from device ? Exaple, if the Holy Forever song is changed, and you want another song there in that position, can u change the BPM and the name from the device it self, or you need to connect it to the app everytime you list is changed ?

[@SamWittek]

Hey! Just responded to your comment over on the MIDI video 😁 let me know if you have any other questions!

[@DariusCounts_DCGuitar]

Love your videos! I also love your tone! Let me pick your brain… I bought two Tonex One pedals to avoid buying a new board to fit everything lol. But I bough the Goodwood Audio Long Line instead of the DISO + DLX since it also had a polarity switch. But on the Long Line I have to keep my Tonex’s master volume below the second little volume tick mark. Have you experienced that with the DISO? I’m trying to decide if I need to get the DISO. I’m running the same amps as you are from Tone Factor, so I know it’s not a polarity issue.

[@SamWittek]

Thanks so much Darius! I've actually never tried a Long Line so I'm not super familiar with it unfortunately. I can tell you though with the DISO I've never had to do any volume tweaking or anything like that. It just works!

[@DariusCounts_DCGuitar]

@@SamWittekthank you for the quick response! Yea, I think I’ll just get the DISO and avoid this headache!

[@sethamgardner]

I have the longline and love it. What exactly is the issue you’re having with it?

[@DariusCounts_DCGuitar]

@@sethamgardner ​​⁠I have a ton of muddiness to the sound. It’s almost muffled sounding. I have to keep the volume on my Tonex One pedals all the way down to the first mark. If I go above it, there is a huge jump in output, and the tone becomes extremely muffled. Then by the time I turn it to the second notch, it distorts every single time.

[@sethamgardner]

@ that’s so strange. Using the pad button on the long line doesn’t reduce the volume enough?

[@JamesBond-uq8qo]

Hell ya

[@SamWittek]

🤘🏻🤘🏻

[@leewalker9008]

Are you using herdim picks?

[@SamWittek]

Yep! Love the herdim picks

[@leewalker9008]

@ makes a huge difference to the tone doesn’t it upside down

[@SamWittek]

@@leewalker9008 oh absolutely, I love the chimey attack

[@leewalker9008]

@@SamWittek certainly edge sounding. Seems to be more unique than the tortex green or yellow that most people use to get the darker tones buried more in the mix

[@SamWittek]

@@leewalker9008 Yeah it definitely adds a lot of versatility! The grip side gives you that nice attack to cut through the mix more, but you can always flip to the normal side if you want to take a step back in the mix for more mellow parts

[@youthfaithmovers]

Should i sell my hx effects and buy bigsky and timeline? Please help

[@SamWittek]

I can try to help! Everyone's rigs are so different though, ultimately it's really gonna come down to you and what you find the most inspiring. Is there anything about the hx effects that's causing you problems? Or sounds you're not able to get with them?

[@me-yg6yk]

just quad cortex with hx stomp and big sky mx is more than enough

[@SamWittek]

That would definitely get you everything you'd need!

[@me-yg6yk]

@@SamWittek this days I go by weight :)

[@SamWittek]

@@me-yg6yk haha hey it's valid. traveling with a super heavy board is a major pain

[@justinmayfield6579]

OK, so you swapped out the Lamb. Interesting enough, Tone Shepherd swapped out his Benson Preamp for the Lamb. Now I'm torn. Did you ever try to get your Benson tones out of the Lamb? I dig the Benson a lot but if the Lamb sounds as good doing what the Benson does, and can also potentially be a whole drive section... that is a tempting offer with Jet Pedals Black Friday sale 😂

[@SamWittek]

You know I never really compared them back to back! They're both so versatile though, they could either be lower gain or higher gain, they do both so well. I love both, but for me personally I liked the benson a bit more, but my drive pedals are always on a constant rotation haha

[@skylershockley8594]

Dude, your tones are incredible.. any advise of what to use with just a single ToneX for the time being? I hate having wet effects after it.. but $$. I tried out the TS ac30 tones. Really pretty clean tones, but I can’t seem to get my drives to stack well.. gets super muddy and l lose that time all together. Would love a “clean” tone similar to what you have. Playing a strat.

[@skylershockley8594]

Lose that tone*

[@jacobmooreguitar]

I’m pretty new to the TONEX stuff too and I also have the benson and vox from time factor but didn’t like them for the first few days of playing with them. I think the key is dialing in the input trim first, then the gain, then master volume to control the amount of headroom you want.

[@joehazen7996]

I had the same issue with ac30 stuff, it didn't take my Benson or Duellist very pleasantly with my Strat. From ToneNet, try the Mayer clean (it's like the #1 downloaded patch ever if you sort the results ), it's a great warm neutral tone that I use for everything. I also bought WorshipTutorials' Matchless pack and it's excellent too.

[@SamWittek]

Thanks! 🙌🏻 Yeah good questions, since you're not loving having the wet effects after, are you running in mono currently with the wet effects before? Also are you using a big box toneX or a toneX one? Take my thoughts with a grain of salt, but honestly if I were in your shoes I'd do whatever I could to invest in the amps first, even if that meant off-loading some drive options or down sizing a bit. If I just had the one big box tonex, I'd try to sell it and target getting two tonex ones. Another option could be selling the single tonex and going for either an iridium or acs1 since those both have stereo inputs. As far as drives/captures go, it's hard for me to say without being able to hear it, but I really dig the TS AC30! I found that I had better success using the clean captures, and gaining it up to taste, as opposed to starting with the edge of breakup captures and gaining them down to taste. Past that I'd just prioritize dialing my overdrives mostly pushing volume as opposed to gain. If you're still having trouble with the capture, you could always try Tone Factor's free AC30 too. It's great, and definitely a different flavor. It's darker so it might pair with your single coils well. Hope this helps!

[@matthiasgerlach786]

Kind of

[@SamWittek]

🤷🏻‍♂

[@therealdavidleong]

Classic TV too high lol

[@SamWittek]

Don't get me started haha, mounting that was a PAIN

[@morganghetti]

$10,000 paddle board, boutique guitar, mediocre ability. Got to be a worship player

[@SamWittek]

Lol, feel free to subscribe for some more mediocre playing!

[@jaywashua]

Worthless comment, poor spelling, probably an Epiphone Les Paul, most likely less than mediocre ability, got to be a KZbin hater with nothing better to do. Nice *pedal* board Sam!

[@Ruvimka]

No, bro, I think the last pedalboard sounded better. Telecaster sounds better, and iridium is better than tonex

[@SamWittek]

I do still dig the tele big time, but I've been really inspired with the humbuckers lately. ToneX vs Iridium is def a solid competition! Both are killer

[@JamesBond-uq8qo]

Same I used to play mostly strat til I got a hh jaguar and Im loving the humbuckers they often fit the worship better

[@SamWittek]

@@JamesBond-uq8qo Nice! Yeah there's a time and place for everything, it's great to have both options depending on what the set calls for!

[@Ramen4Days]

I don’t think there’s even a fair comparison between what the Iridium can do and the Tonex. Iridium is flat and 2 dimensional in comparison and overdrives/compresses in an unnatural way, stuff that doesn’t translate via KZbin compression.

[@SamWittek]

@@Ramen4Days Yeah the feel of the ToneXs immediately felt better to me, which you can't really express in a YT vid

[@chrishepburn1503]

Tell me you play worship music without telling me you play worship music. Get some originality.

[@SamWittek]

Hey Chris, thanks for sharing your thoughts! Just a little confused though, is there something wrong or unoriginal about the fact that I primarily play worship music?

[@benjaminkoskinen5835]

Maybe be the person you wanna see yourself 👐🏼 Hating has not helped anyone or anything. Hope your doing well Chris and not only spewing garbage on others for doing a good job.

[@chrishepburn1503]

@benjaminkoskinen5835 You're mistaking "hating" for "my opinion." Am I not allowed to have an opinion? People put themselves out there by putting KZbin videos up, and they have to deal with negative opinions. That's life. I think most guitar players in the worshop community have no originality when it comes to gear. The same old pedals time and time again. If you don't like my opinion, that's fine, but I'm allowed to have one.

[@chrishepburn1503]

@SamWittek It has nothing to do with playing worship music. It has everything to do with the unoriginal gear choices you all make. You can basically copy and paste a worship board for everyone to use minus one other two pedals. Oh, and I don't know why I have to clarify this, but it's my opinion. that's all. You might not like my gear choices, and that's completely fine.

[@SamWittek]

​@@chrishepburn1503 hey that's fine, you're totally entitled to your own opinion. I think it does bring up an interesting question though, why is it bad if people who play the same genre of music use the same gear? That would be like criticizing rock/metal players for using rat-style distortion pedals and Marshall amps instead of "being original." I think it really comes down to the player and how they use the gear rather than the gear itself. That's just my opinion though 🤷🏻‍♂