Pedershaab PM1A. 70 years old dragline - part 1.

Nu også kendt fra tv:
www.dr.dk/drtv...
Pedershaab PM1A ca. fra 1950 gøres klar til transport, efter mere end 45 års stilstand, motoren stod af først i 70'erne (måske før, ham der slæbte den hertil, kan ikke helt huske det, han er søn af den sidste, der havde den i drift) for ca. 26-27 år siden blev den slæbt hertil, hvor den siden har stået. Nu har et par ildsjæle arbejdet på den, i nogle måneder - fået en motor i, og fået spil, og undervogn til at køre, så den er klar til at blive transporteret på værksted.
Transporten kan ses i part 2.
70 years old danish built dragline, Pedershaab PM1A moving again after more than 45 years, ready for transport.
It was abandoned because the engine broke (45 years ago) they replaced the engine, and used all their weekends in the summer 2020 before it was ready to move.
The engine in it now, is smaller than the original, so it will replaced again.
Normally you can steer the tracks from the operatorstation with a wheel, but it's a little rusty.
Watch the transport in part 2.
pn.dk/en/history
arkiv.dk/vis/4...
/ 799494264114878
Part 2.
• Pedershaab PM1A. 70 y...
20. september 2020

[@jamessmith7691]

Thanks for sharing this video. I like seeing these old beauties run.

[@brucedavenport1324]

It's nice to see the old devil running with such a sweet sound .

[@davidbrewer7937]

That is a smooth sounding motor!

[@user-kolhoz100let.]

Лайк из России с любовью к ретро технике!

[@TheCarDemotic]

Honestly that is really awesome. I like how old construction equipment looks

[@walterwhitaker1395]

WOW!That was EPIC! Nice job gentlemen! This was a time in the day when a Operator and a Oiler both worked to keep that s machine running in top shape

[@christopherlovelock9104]

You need people who are 'familiar' with these machines in order to get them working again, - wonderful job well done. There are a number of 'MENCK' machines preserved, - OK they're German, but this is the first time I have come across this make. I look forward to seeing it restored.

[@clfhnt]

This is by far one of the best videos on U-tube. Thanks for sharing it with us!!!

[@henrikgandrup]

Thank you, very much 🙂

[@shaun5944]

Well done men, great job. I love to see old machines get rescued. Regards from the UK 👍🇬🇧👋

[@screwsnutsandbolts]

Superb old machine ! 👍

[@Yosemite-George-61]

Amazing stuff... Iove those machines since I was a kid...

[@hungarianpolarbeartravelin3409]

I love old equipment. It was made to last .

[@jonka1]

For all those who are impressed with how well the engine runs. If you read the Danish introduction it explains that the original engine was missing. This is a replacement.

[@henrikgandrup]

That's right, it was abandoned because the engine broke 45 years ago. The engine in it now, is smaller than the originally, and will be replaced again

[@stephenmoore3990]

A great bit of video . Thanks for posting. The engine sounded great and I suddenly realised it was a Lister FR diesel ( FR4 ?) , the same range as I had in my old Barford Perkins Q6 road roller. My FR3 engine was installed in the BP in 1950 so about the same age as this wonderful dragline.

[@henrikgandrup]

You're right about the engine, it is a FR4 🙂

[@stephenmoore3990]

@@henrikgandrup Thank you Henrik. If you wish to se my Lister in action you can see my roller first move in decades on KZbin here. "1928 Barford Perkins Q6 Tandem Road Roller 1." keep well and best of luck with your excellent work.

[@Tiffy552]

Two mature guy's sorting it out. Admire them greatly.

[@horstszibulski19]

Please show more from the F_35! My father had a F_28 LWB high top van in the early 70ies, loved it! Great job on the crane! :-D

[@avit24]

Nice mercedes 306d pick up love it!

[@joelhenderson5404]

Old stuff means good stuff.

[@andreyvlasow5961]

I like that in your country old machines give a new life, in Russia where I live old machines go to scrap.

[@Vladimir_Sabanin1162]

Если по интересуешься, то узнаешь, что в России много сохранëнной советской строительной и карьерной техники.

[@hanziwatdan5373]

How beautiful its runs .safe him .

[@24062004Fidel]

Best Reegarts from Berlin 👍🍺

[@bvanskike]

The KZbin algorithm thought you needed more views, so here we are!!!

[@zebvajvaj4541]

ຢຢຢ

[@Milus2006]

This engine sounds like Messerchmitt or Junkers aircraft engines. Amazing that is still working. Crazy.....

[@henrikgandrup]

The engine was replaced, before they could move it - it's a Lister FR4

[@klaasj7808]

other engine...

[@ajayshukla9040]

Gdb

[@ajayshukla9040]

OK 😎 😈😇@@henrikgandrup g

[@hafizchannel5609]

@@henrikgandrup ❤️

[@timwarlick1565]

Great video..good to see them saved

[@lieugebo805]

This is awesome 👍

[@bearbait2221]

I have found pieces of this dragline style in mountains of Alaska not much left. cool vid

[@JungleYT]

WHY is it called a "Dragline?"

[@bearbait2221]

@@JungleYT It normally drags a bucket on a cable. its the grand dad to modern excavators

[@JungleYT]

@@bearbait2221 OK Thanks, man!

[@pnwRC.]

Great video!

[@vladimirsavioukburcovscaia6736]

Maquinaria seguro alemana, acero!

[@bowolaksono8924]

Good job sir

[@vladimirsavioukburcovscaia6736]

Súper!

[@Marcelo-56]

It is not in the description of the video, but, that old engine sounds like a diesel, and how nice it sounds when it regulates (idle) ⭐

[@ВладимирДобрый-ф4ю]

Капец а он ещё и сам поехал, думал все там скисло и заклинено, Делали на века как говорится)

[@vivetuvida35]

Geil Teil 🤪✌️

[@abildaabrunkulsleje90]

Samme model som de to vi har i Abildå Brunkulsleje !

[@donwright3427]

I love rusty look

[@fernandojimenez5173]

ESO ES COMO REVIVIR UN DINOSAURIO EN LA ERA PRE HISTORICA. BENDICIONES A ESO SEÑORES QUE VALORAS LAS COSAS BUENAS DESDE COLOMBIA. GRACIAS VI TODO EL VIDEO MIS TIOS

[@luisbatista1103]

Jonathan W is trying to salvage one out of the bush .....in America lol 🇨🇦 look him up Jonathan W

[@juliusheide3643]

this i not a old dragline, is a mature dragline.

[@arnoldaltjr.2099]

Now that it is running what do you intend to do with it? Certainly not able to be put back into regular service. Perhaps a museum or just trying to get it closer to a cutting torch. It is interesting that you were able to get it to run. Good job.

[@klaasj7808]

Drive to Bruxelles and make an end to the COVID scam with it. That would be nice.

[@jamielacourse7578]

Some guys get ALL the fun........

[@lutemule]

I think by watching Jonathan W, I am here now.

[@ЮрийКовригин-х2в]

Да его недавно заводили и гоняли туда сюда а то 70 лет не трогали ищи дурака

[@АлексейПарамонов-б4с]

Так читайте внимательнее, технике 70 лет. А не сколько он на этом месте простоял

[@hamiltonsullivan6563]

Are you guys saving her or are you going to scrap her? HOPE ITS THE FIRST ONE. Also how you guys doing with Covid over there? From the states 🇺🇲

[@henrikgandrup]

Of course is it the first one 😁

[@hamiltonsullivan6563]

Good!

[@hamiltonsullivan6563]

Hood to see more videos and good luck!

[@claesmansson9070]

Covid number infection number is falling,but soon british vari.will take over in febr. they fear.

[@sskar48iraq71]

I am 61 years old,which is older than me...

[@frontagulus]

Looks like a Lister FR 4-cylinder engine in it

[@henrikgandrup]

And you are right about that 👍

[@chuckwagon5518]

Those spiders are gonna be pissed!

[@ferdinandocappelletti6740]

my compliment, very difficult re start so old machine. Also, really unknow brand, dutch manufacturer i think

[@henrikgandrup]

It's a danish manufacturer, a Pedershaab, the factory was in Brønderslev in Denmark 🇩🇰 pn.dk/en/history

[@ferdinandocappelletti6740]

Tks Mr Pedershaab

[@marcellebaudry5786]

superbe pierrot paris

[@chrissmith7669]

Never count something out just because it’s old

[@souzahome6960]

kicking ass

[@Peterbilt359]

I've got a 1927 10B Bucyrus with all the attachments. I sold it 10 years ago the guy never picked it up.

[@andrek5008]

It still at your place waiting sir?

[@kevincoleman9761]

I pulled it to city yard next to my house. Still there. I just moved away a month ago. I'll take loader and couple trucks down this winter and move it again. I should call guy who bought it. Give him his money back or have him come get it. It's in Marysvale Utah. I should put it on KZbin. I had 3 of them. Hell of a thing to collect.

[@rgp8038]

And that's how it's done

[@michelboisvert5684]

hi, where are you from, what language do you speak, I speak french I'm from Quebec, what are you going to do with this crane? bye

[@jeffmallison7876]

It's Danish. Use Google translate to figure this out.

[@claesmansson9070]

Getting it transported to repair shop other place in Danmark.Transport can be watched in part two,text and voice says,and he calls the two men tokkenokker.

[@mnogogrannik_]

Ого)) Вот это динозавр!!!))Очень интересно!Я с вами! )Заходите в гости на кофе!

[@geovanedasilva134]

Esse arranque é bom amigo kkkkkkkkkkkk.

[@douro20]

I guess no one in Denmark made a suitable engine?

[@НиколайД-р6ю]

Ставлю лайк за дрынь, дрынь, дрынь, др, др, др, дри, дри, дри,...

[@usuariogranprime1904]

😲😲😲

[@НиколайД-р6ю]

А чо???, так можно было???

[@bobcriss600]

Sounds a bit like a ship’s engine...

[@thorkildebsen367]

Kan huske at min far kørte med en magen til den hed bare PM12 er

[@henrikgandrup]

Sådan en, er Abildaa brunkulsleje ved at lave i stand, de har tre gamle PM12ere og får en ud af dem. De regner med at den er køreklar senest i 2022. De har i forvejen to PM1Aere der kører til deres åbent museumsdage.

[@kristinasrensen9783]

Hej Thorkild hvad hedder din far? Jeg har også en PM12 jeg er ved at lave i stand. Mvh. Mikael

[@thorkildebsen367]

@@henrikgandrup har godt set dem her på en a siderne der er en slevskolv og en med dybdetske

[@thorkildebsen367]

@@kristinasrensen9783 hej han hed Viggo Ebsen og rigtig god fornøjelse 😉

[@claesmansson9070]

Hvis din far kørte med sådan en,må han godt køre den tilbage igen!

[@АнтонПупкин-к6о]

70 лет ага. А следы,как пригнали его сюда, до сих пор не заросли. За 70 лет он врос в землю бы на пол метра

[@misha_pankof]

Технике 70, а не стоял 70, умник блять...

[@marianojustiniano6664]

Me gusta

[@juanuribe8307]

Porque no dicen que llevan 10 meses reparando el motor y luego muestran que lo encienden con iniciador en 2 horas mentirosos

[@weberjack5483]

Two men to trove, Operator und the Brake man I'm think this sitem was over inthe 1930-40this I'm no this sit Bucyris Eri 10B 1942 I'm operet in the 1960 this

[@henrikgandrup]

It was, but the wheel at the operaterstation was a bit rusty, after 45 years. That's why they had to do it, the old fashion way

[@weberjack5483]

@@henrikgandrup it is so excited Dank you

[@aloisioteixeira2119]

🐂🐂😈

[@НиколайЗастава]

Смемдісят років а сліди не заросли

[@saowaluktaweetipparat2033]

🇹🇭

[@commonsenserules7995]

Purring like a kitten. They better grease it up real good.

[@marcellebaudry5786]

dragline a carriere pierrot

[@tatra-danielkaras]

NADHERNY LANOVY BAGER

[@cjensen4383]

Now I know why my husband JEFF JENSEN has a old Marion crane, It must be in the blood, Geat Grand parents and from around Copenhagen.

[@giorgiobassi9078]

Niente. Idraulica...? Non. Si. Vede. Niente... 🤔😯😑

[@Sasha-nu1zn]

Древних годов, а на стартере