You have saved the day, I was wondering if there was a video how to do this step by step and WA-LA here it is. Thank you for speaking each part out loud and explaining. GREAT VIDEO!😅
@BradHemedes2 жыл бұрын
🙏
@petera11176 ай бұрын
Voila….mr ken. lol. Wa-la sounds pretty cool too though.
@MrKenwillis6 ай бұрын
@@petera1117 It was like magic, it just appeared from no where lol. Thanks again for a perfect video
@jimmikoz27393 жыл бұрын
Hi Penn Fathom reel repairer thanks for the info just ordered one for me and a friend who owns a tackle shop in Wellington New Zealand and another who services washing machines what a great tool. Those clips have a brain and go in any direction as well
@BradHemedes3 жыл бұрын
You’re welcome!
@peterpanmenorcafishing61962 жыл бұрын
Nice information master keep it up now I know how to maintain my reels. Keep safe always master watching from Germany
@BradHemedes2 жыл бұрын
Salamat master.
@lecnhojnaval45023 жыл бұрын
Wow! Ganda talaga ng penn boss i dol. Nag babaka sakaling may pinag lumaan ka boss i dol. Sira na kc yong reel na ginagamit ko.maraming salamat poh godbless.
@lecnhojnaval45023 жыл бұрын
Nag bakasakali lang poh. Ako boss i dol na kung may pinag lumaan ka poh.
@BagsRivaRaet4 жыл бұрын
Iyon pare dito na buti Naman gumawa kana Ng Channel Power ka talaga Kay idol Richard Molina support ako sayo habang akoy mabuhay kagaya Ng pag support ko idol Richard Molina
@BradHemedes4 жыл бұрын
Salamat master!
@koolyjhonasis14623 жыл бұрын
Gravy ang ganda naman nyan sir pang malakasan talaga
@petera11176 ай бұрын
Been catching tuna since I moved to sd. Crazy that tuna is now in ny. The East river used to be nasty and now it’s fishable.
@BagsRivaRaet4 жыл бұрын
Ohhhwow halos similar sila Ng Watch gear may ratchet Ang watch pag gumawa ako
@sab35263 Жыл бұрын
nice video, after I greases and oiled my reel I hear a grinding noise when I use the reel to test the drag. Did I put too much grease or not enough you think? the grinding comes from the clocker side on the left
@BradHemedes Жыл бұрын
Did you remove the left aide plate and oil the bearing?
@BagsRivaRaet4 жыл бұрын
Good job perfect
@jimmikoz27393 жыл бұрын
Hi Your work on this reel is very good. I am about to buy a Penn Fathom 25L2D and I was very interested in your disassembly. What I would very like to know is what is the make of the c clip tool. In the video I can see the part number 350 14 but could not pick up the maker. At a guess it looks like a Snap On tool is that correct?
@BradHemedes3 жыл бұрын
This is what I found in Amazon. Dynamite Ultimate E-Clip Tool 1.5MM-5MM, DYNT1107 www.amazon.com/dp/B07XG91TS9/ref=cm_sw_r_cp_api_glt_fabc_ZHEQPNYNWPHHZN9DMHHD
@petera11176 ай бұрын
Thank you for asking Jim
@LegendEfrenReyesidol3 жыл бұрын
Ito yung maganda pang trolling pangmalakasan po .hehehe.
@rapsodhyfishingadventure60732 жыл бұрын
ganda nman nyan master/idol.....baka may pibaglumaan kba dyan n fishing gear master.....baka sakali lng....ingat po kayo lagi master/idol BRADLY
@BradHemedes2 жыл бұрын
Wala e
@rapsodhyfishingadventure60732 жыл бұрын
@@BradHemedes salamat master,godbless po
@nancyn3863 Жыл бұрын
Hi do you know how to unscrew the drag knob on the new generation pen fathom ii ld 2 speed? You have to pull the knob to adjust it. Also my free spool was very bad so I was thinking to take apart just the drag knob and not the reel handle and put oil in parts where the spool rotates, does that sound like the right thing to do?
@BradHemedes Жыл бұрын
I'm sorry, I do not. But I would bet it is also the same if the mechanism to disengage the low gear is to turn the ring over the button. if you want lubricate the spool bearing you can remove the side plates without removing the handle. nice thing about my Penn and Avet lever drag.
@nancyn3863 Жыл бұрын
Thank you brad this video has been a tremendous help to me. The new models drag adjustment knob requires that you pull it out to turn it. I know you have to remove this knob to get to the spool bearings. So I’m going to try and loosen it while pulling it out at the same time.
@BradHemedes Жыл бұрын
Oh yes, you have to remove the drag preset knob.
@petera11176 ай бұрын
Gen1 rules
@agoodhi2 жыл бұрын
2nd time using my 40nld, and it stopped engaging. Had to put it on sunset to get my line in. What should I look into?
@BradHemedes2 жыл бұрын
The knob by the lever drag maybe too loose.
@agoodhi2 жыл бұрын
@@BradHemedes was working fine all day until the end 😢 luckily I didn't hook a tuna and dump my spool
@BradHemedes2 жыл бұрын
Hopefully just a loose preset knob. LMK
@petera11176 ай бұрын
Response ?
@stevejohnson57282 жыл бұрын
where can i buy the abu garcia or other c-clip removal tool ? been searching online and cant find one>
@BradHemedes2 жыл бұрын
Mine is no longer available in Amazon. This is what found. NEIKO 01970A E-Clip Remover & Installer Tool Set | 4 Piece | SAE | 1/4" to 3/8" a.co/d/g5yqnBS
@ericbryan828 Жыл бұрын
I believe a spring popped out of my drag. Any tips on getting this back into place? Also, you are masterful at this sort of work!
@BradHemedes Жыл бұрын
Can you give me the part number so I have an idea which part are referring to.
@ericbryan828 Жыл бұрын
@@BradHemedes sorry, I believe it is #14 on the reel schematic.
@BradHemedes Жыл бұрын
You need a pick or pointed tweezers. Line up the lever on the rachet (2A). Pressed down the pin and spring push forward the lever. Hope that helps
@gonzarb933 жыл бұрын
Hello sr, what You use to clean it outside after salty water fishing? You use wd40 to clean outside? And also wich oil and Grease to use? I don't have acces to fishing reel lubricants, like penn abu garcis etc. Also, the bearings of the fathom 2 are ceramic? If not, it worth yo upgrade yo ceramic ones?. Thanks and have a Nice day
@BradHemedes3 жыл бұрын
I just rinse mine with fresh water but don’t use pressure. You use WD40 to remove dirty grease. You can use singer oil and superlube synthetic grease.
@BradHemedes3 жыл бұрын
I believe the Penn has stainless bearing. I don’t know much about ceramic bearings. If you need to replace the bearings. I would suggest use OEM parts.
@gercelbitoy75423 жыл бұрын
Sarap sa trolling yan kabayan
@usstartarsauce Жыл бұрын
is the handle same as FTH15XNLD2 ?
@BradHemedes Жыл бұрын
Sorry not sure.
@azonemohd3887 ай бұрын
Hii...i get interested with your c clip tool...where can i get it..can you send me a link to buy it..tq
@BradHemedes7 ай бұрын
a.co/d/04mVqPct
@petera11176 ай бұрын
The music is epic. lol
@aquilapower93003 жыл бұрын
Hi, it's brass pinion gear or stainless steel?? Because in the box say that 'stainless steel main gear and pinion gear'
@BradHemedes3 жыл бұрын
Definitely Stainless main gear. Forgot about the pinion.
@aquilapower93003 жыл бұрын
Hmmm.. But the pinion looks like brass gear. How about durability this reel?
@BradHemedes3 жыл бұрын
To tell you honestly I don’t use the reel to much. It’s too big for the type of fishing I do. But I know someone in the Philippines who uses a fathom lever drag single speed almost every day and he said it was dependable . He did have to service the reel every 2 months though.
@aquilapower93003 жыл бұрын
Ya, i think this reel dependable for heavy fishing. Thx too much for your information 👍
@petera11176 ай бұрын
The music is epic. Lol
@napok103 жыл бұрын
Thank you. The draw washer can be removed?
@BradHemedes3 жыл бұрын
Yes if you want to disassemble the main gears.
@BradHemedes3 жыл бұрын
I’m sorry I didn’t understand your question. Do you mean “Drag Washer”. If that’s the case, no it’s glued to the spool.
@napok103 жыл бұрын
@@BradHemedes I mean the drag washer. So it is not posssible to replace the drag washer?
@BradHemedes3 жыл бұрын
I stand corrected. I double checked the schematic. The drag washer can be replaced. It is just held in place by a retaining ring.
@socalfishinglife83093 жыл бұрын
My reel is backwards .when on full strike it's on free spool.. and vise versa. Any ideas?
@BradHemedes3 жыл бұрын
It happened to me. It was because I was under and over tightening the preset knob. Position the lever to "free" then loosen the preset knob. Tighten little by little until drag engages. Hope that helps.
@robertarnold66723 жыл бұрын
I watched your video with interest & I would like to start servicing some of my own reels to save money. Can you recommend the basic tools & products that you use. What degreaser is that & where can I find it? Thanks!
@BradHemedes3 жыл бұрын
Thank you for your interest. I use either a Penn or Abu Garcia degreaser I bought from Amazon.
@BradHemedes3 жыл бұрын
You can get the Abu Garcia reel maintenance kit plus long nose pliers, tweezers and C-clip remover.
@robertarnold66723 жыл бұрын
@@BradHemedes Thanks! I will be sure to order one. Also I just bought a Penn Fathom 40 2 speed reel so thanks to this video, I will be able to service it myself. I enjoy your channel & recently subscribed.
@BradHemedes3 жыл бұрын
Thank you for your appreciation!
@petera11176 ай бұрын
Don’t respond to my question. Found my answer.
@petera11176 ай бұрын
List of tools needed?
@BradHemedes6 ай бұрын
Screwdriver, long nose pliers, and C clip tool
@MsLifesavers3 жыл бұрын
Sir, good day! Magkano po yung PENN FATHOM 25NLD convert to peso? Kagaya nun pinadala mo kay Sir Richard Molina. Salamat po. God bless.
@BradHemedes3 жыл бұрын
mga 9K master. mababa dollar ngayon
@MsLifesavers3 жыл бұрын
@@BradHemedes malaki ba yung shipping fee sakaling magpabili ako dyan Sir..hehehe..pcnsya na Sir ha! Salamat.
@BradHemedes3 жыл бұрын
Yan po di ko alam e.
@MsLifesavers3 жыл бұрын
@@BradHemedes okay Sir, salamat.
@robertbrandywine Жыл бұрын
Please, when you remove a part or assembly, turn it all around on camera so we can see it, before you set it down off camera.
@BradHemedes Жыл бұрын
Noted
@jojomosqueda41123 жыл бұрын
Pang malakihan talaga
@Achievementsxyz Жыл бұрын
Is the drag washer glued to the spool?
@BradHemedes Жыл бұрын
No it’s not. It held by a ring retainer in the center of the spool.