Penn US 113W Fishing Reel Upgraded with Boca Bearings

[@johntells1460]

Got little over 3 mins spin on reel that's loaded with 60lb big game fishing line. Casting 13ft talon ulua pole with 10oz lead was insane!

[@johntells1460]

@Uluaz_still_here yup! At first had hard time because the spool spun to fast. Had to practice... especially for when i cast at nite.

[@Subscribetonature]

How are you getting 3 min I just swapped them out and only getting 50sec tops

[@johntells1460]

Seriously at first it spun for 3 mins. Been using reels alot. I just checked the spin and now it's a little more then 2 mins.

[@kaimana9990]

could you possibly make a link for me to get all 3 bearings?

[@bocabearings]

You can find all (3) of these bearings here www.bocabearings.com/products/bearingapps/fishing-reel-bearings?ProductType=2 part numbers SMR103C-YZZ #5 LD, SR2C-YZZ #5 LD and SR144C-YZZ #5 NB2 were utilized in the video.

[@johnnycortez46]

So how have these bearings been working out for you???

[@jonathanjones20]

Is there a way to upgrade the penn jigmaster to do the same ?

[@jonathanjones20]

Would this work with the pen jig master?

[@HOWARDPETERSON-pq2ku]

THE LARGEST OF THE TWO BEARINGS ON SPOOL SHAFT? THANK YOU.

[@HOWARDPETERSON-pq2ku]

SR1038C-2OS #7 AF2

[@HOWARDPETERSON-pq2ku]

WHAT IS NUMBER OF THE LARGEST OF SPOOL BEARINGS? HAVE HAD HARDEST TIME IN ORDERING THIS BEARING.

[@HOWARDPETERSON-pq2ku]

SR1038C-2OS #7 AF2

[@rcrell]

What oil are you using to lube these bearings???

[@bocabearings]

We recommend Boca's High Speed Oil www.bocabearings.com/products/high-speed-oil-13931, has been a trusted fishing reel lightweight oil for many years.

[@joshuac3058]

Do the barring not come lubed?

[@bocabearings]

Morning Joshua, We offer lube free, oiled and greased variations for the anglers preferred preference.

[@alijahaukaib3818]

Hey the site is very confusing to me and I want to replace my bearings to improve my reels performance. Is there any way I could purchase all 3 bearings I need through you?

[@alijahaukaib3818]

Jeff Brooks and does that include all three of the bearings

[@johnnycortez46]

@@alijahaukaib3818 Did you ever find out about these bearings? The website says 2 in a pack when ordering. This dude replaced 3

[@RyoFc3s]

@@johnnycortez46 yeah what the heck?

[@Transfiguracion6]

On the website I dont see a model for the US 113, are the bearings the same size/compatible with the normal senators 113?

[@jakesmith5377]

Hey Russell, shoot me an email, I will help you out. [e-mail]

[@warpedweirdo]

Spin time isn't a good measure of casting performance. Think about it: when was the last time you made a cast that required the spool to spin for more than a few seconds? High-end bearings are providing zero benefit vs cheaper bearings when the rig being cast is decelerating more quickly than the spool is. Maybe those bearings you installed will provide a marginal improvement in distance when you're throwing a live anchovy with no sinker and don't bump the spool at the start. An inch maybe? Realistically, putting in those high-end bearings only made your 113W harder to control. I have a Penn Leveline 350. The spool rides on bushings. When using it on a 7' rod to hurl a 3oz weight, those bushings don't negatively impact casting distance; thumb braking is required at all times to keep this reel under control. Penn Squidder 140. The spool of this reel rides on ball bearings. I actually increase bearing friction by lubricating them liberally with Corrosion-X. Using a thicker oil might improve my distance by reducing reliance on my imperfect thumb for braking. Ambassadeur 6500 C4 throwing 1oz. Ambassadeur 5500 C3 throwing 1/2oz. Calcutta CT200B throwing 3/8oz. Decent bearings are lubricated with oils of various thicknesses to keep the spool under control with less input from my thumb. Ambassadeur 2500C throwing 1/4oz and lower. Now we're in the territory where expensive bearings are starting to make a real difference.

[@oneloveyessah]

Where can i get these bearing from?

[@bocabearings]

You can find all (3) of these bearings here www.bocabearings.com/products/bearingapps/fishing-reel-bearings?ProductType=2 part numbers SMR103C-YZZ #5 LD, SR2C-YZZ #5 LD and SR144C-YZZ #5 NB2 were utilized in the video.

[@rodendeguzman5011]

what are the sizes for all of these bearings?

[@con3boy96768]

Still trying to find these

[@bocabearings]

You can find all (3) of these bearings here www.bocabearings.com/products/bearingapps/fishing-reel-bearings?ProductType=2 part numbers SMR103C-YZZ #5 LD, SR2C-YZZ #5 LD and SR144C-YZZ #5 NB2 were utilized in the video.

[@andyking2713]

Are these the same bearings for the US113n?

[@bocabearings]

Yes! They should be the same!

[@HOWARDPETERSON-pq2ku]

ANYONE CAN GIVE ME PARTi# FOR LARGEST OF THE THREE BEARINGS REPLACED? SINCERE THANKS...

[@HOWARDPETERSON-pq2ku]

Reply my own question. Bearing in question: SR1038C-2OS #7 AF2. Mike and Daneila, Boca Bearings helped me.

[@chickasawrodby-brash6359]

Yo can u send me the sizes u ordered only found the bigger one on there site

[@jimcatanzaro7808]

Honestly it’s a waste of money I would rather put the money to the gas for the trip these reels are mostly used on boats

[@moretrenmoremen9535]

No they’re not