Per4mance Development DIRS Diff Brace Install Hellcat Redeye

[@DrivewayDemons]

What do you guys think of the new goodies? Is the green devil 😈 ready for the quarter mile?

[@roderickfelston1062]

Driveway Demons dude this was bad ass I will Definitely be getting one of those!!!! Nice👍

[@HellcatDreaminJosh]

Driveway Demons Great Video I'm glad you The Green Devil a Def Brace to the Def from Braking

[@pops55650]

I put the older version of their diff brace on my Scat Pack and notice slightly reduced wheel hop on the street. Not meant to be a cure for wheel hop but it helped a bit. Also had a rear strut brace. Been thinking of getting this brace for my Redeye.

[@jonc8695]

I have seen a demon and a 1000 hp charger that both blew the differential into pieces right off the line. This is a very wise decision on your part DD.

[@Mandolin1944]

@@jonc8695 Have to ask why does FCA not put one on at the factory? At the very least the Demon should have come with a brace because they were essentially selling it as a street-legal race car?

[@shawne7228]

A brace was one of my first add-ons.

[@DrivewayDemons]

Shawn E awesome 💪🏻💪🏻

[@oscarpalacios7198]

Good information

[@DrivewayDemons]

Thanks Oscar!

[@Mandolin1944]

Many people are no doubt surprised to find out that a differential brace is a new thing for a Dodge Hemi and maybe its just me but if it were my car I would have put the diff brace on BEFORE boosting the horsepower? Anyway well organized video and pretty cool car.

[@DrivewayDemons]

Definitely! The dif brace is worth it

[@anoint426hemi6]

I agree, before ANY added hp.. new axles, driveshaft, diff brace and depending on hp gains, new rods and pistons.

[@DrivewayDemons]

Anoint426 Hemi for sure! Although the demon and redeye only need diff brace. Axles are much stronger so is driveshaft. I am getting a driveshaft so I will be set. There are a bunch of hellcat making over 1200 hp with stock internals. The red eye and demon or even stronger. Anything 1100 and under stock is fine with good tuner.

[@T-Stat79]

Finally some 1320 times bro ! I'm pumped !

[@DrivewayDemons]

Yup!

[@christopherdemarco8024]

Curious if the DIRS is that much better over the billet one they make, for the money difference?

[@DrivewayDemons]

It’s a lot better and stronger

[@christopherdemarco8024]

Did you have one of the other ones Cory? To compare to each other? It looks stronger, cause there is more there obviously, is the claim even less flex now?

[@LazerExile]

for someone that doesnt know about car parts but loves cars, what does this do to the car ? and what does it help with ?

[@DrivewayDemons]

Hey Nic! Thanks for watching. It prevents your differential from having excessive movement and prevents wheel hop. It will also prevent your rear end from exploding. It’s a must have.

[@LazerExile]

@@DrivewayDemons for a factory tuned 392 widebody would this be a must have as well? or its just good if your planning on upgrading your hp? also i think its time you make a 5 must have things that make your charger or challenger faster , perform better, and overall beneficial for the vehicle. theres alot of vids like that out there but i think people on your channel will really tune into that you got amazing content !!!

[@DrivewayDemons]

Nic Mac Thanks Nic! That’s a good idea and I think I will probably do that.

[@noid9368]

Depending on the design of the brace, specifically the manner in which it attaches to the axle (or "diff" as y'all are calling it) it can actually CONTRIBUTE to catastrophic detonation of the axle instead of preventing it. Yes, it can help prevent wheel hop by fastening it securely to the rear cradle and bypassing the compliance in the OEM rubber mounts, thus avoiding high-frequency oscillations / excitation of the axle, but potentially at the cost of the integrity of the axle housing. Personally, I'd invest in poly bushings before I installed an aftermarket brace. Good luck.

[@ElReyDominicano612]

The Redeye just gets better each day, much love Corey

[@DrivewayDemons]

Thanks bro 💪🏻

[@mikeronan7270]

Driveway Demons: HEADS UP!!!!! 2020 Supra recall. Just wanted you to know if you have any friends with this car. I sent this out to a few KZbinrs that I know have 2020 Supras. Just wanted you to be aware of the 2020 Supra recall. Has to do with welds regarding the seatbelts. Just wanted you to know so you can contact your Toyota Dealership and have it inspected. The recall states that BWM is aware of 7 cars that have this defect. It goes on to state that the entire car will be replaced. Just wanted you to know for your own personal safety.

[@elijahpryor76]

is sure is 💯💯

[@DrivewayDemons]

Daddy Jr 💪🏻

[@voltron_5]

Will it void warranty?

[@gpgoldb]

Great install video for the Green Monster. Well worth it.

[@DrivewayDemons]

hellcat2017 thanks buddy

[@roderickfelston1062]

WHAT IS THE BEST OIL CAN CATCHER TO USE, and I need help with that said which one is better for a daily driver , wide body hellcat or WIDEBODY scat pack ????????????

[@DrivewayDemons]

UPR products on the passenger side.

[@JeffCarsboatsatvs]

Cory I’m getting my redeye tomorrow waited along time for it but it’s ready .you were a inspiration for me to get one thanks and keep the good videos coming I would like to send you a pic or video of it all your great info has lead me to purchase one .

[@DrivewayDemons]

Thanks Jeff! I appreciate you watching and glad I could help. Your going to love it!

[@JeffCarsboatsatvs]

Is it necessary to get a catch can ?

[@lg4uranger73]

Yes it is absolutely necessary to get a catch can!! Keeps the blown by oil out of your intake manifold and keeps it from sludging up your valve train!! Should be everyone’s 1st mod!!

[@lg4uranger73]

Yes it is absolutely necessary to get a catch can!! Keeps the blown by oil out of your intake manifold and keeps it from sludging up your valve train!! Should be everyone’s 1st mod!!

[@JG-ef2cn]

Awesome install vid brother!👍 Lock-n-load! 😎🇺🇸

[@DrivewayDemons]

J G thanks buddy!

[@derektrujillo2292]

Do they make a spool for these cars like they do live axle cars

[@DrivewayDemons]

Hey Derek! I’m not sure if they do.

[@derektrujillo2292]

@@DrivewayDemons if they do you should get one. even an air locker

[@deanwharepapa8561]

Awesome work mate

[@DrivewayDemons]

Thanks dean

[@tyronewalton3257]

Where did you purchase

[@deanosborn3464]

Great install video. How much was the brace?

[@DrivewayDemons]

Check with per4mance development. I am not sure sure.

[@jamesprichard1647]

Awesome video! 💪🏻

[@michaelschultz9274]

Excellent video and install! Such a beast! 💪🏻

[@JeffCarsboatsatvs]

Nice video how much for this

[@DrivewayDemons]

Hey Jeff go to the getper4mance.com website.

[@JeffCarsboatsatvs]

Thanks Cory

[@thiscantbehappening3806]

Awesome needed mod

[@Kstephens07]

Hey Cory, I’m probably going to get one of these for my redeye. I was wondering if I would have to remove the whole brace to change out my diff fluid?

[@mdmuscle9464]

Great video. I don't understand why dodge voids the warranty if you put this on since it helps strengthen our cars.

[@DrivewayDemons]

I agree. I don’t get it. It’s a great piece to have

[@pops55650]

Dodge needs to rethink that. Or buy the braces from Performance Development and sell them as Mopar parts lol

[@juniorrikaumaki5027]

Green Devil is on a roll to grillin marinated mustang mayham lol

[@DrivewayDemons]

Junior Rika Umaki haha 🤣🤣

[@robbyturbo109]

I’ve got a 6 speed Srt 8 that I’d like to take to the drag strip do you think I should do this mod along with drag radials?

[@DrivewayDemons]

Robby Turbo thanks for watching Robby. I say for sure! It will greatly help your launch!

[@pops55650]

Yes it helped on my Scat Pack auto.

[@thiscantbehappening3806]

I may have to get one for my car haha

[@frost732]

Tiburon on a two step...🤔

[@agenttex7569]

Just so you know it is true the 2018-19 hellcats are dumbed down in power, my uncles wide body 19 is making 598 horsepower... he had a 17 before is it was definitely making the power but the new ones are screwed other than the demons and the red eyes.

[@agenttex7569]

We went to Chrysler they said it was “running within the parameters” and brushed us off, then they sent some engineers down to check it out and they said the same thing. Our dealer basically turned on us, we bought every single car from lithia and they just tried to get money from us. Our sale guy bought my uncles 17 hellcat and he drove the 19 and said it’s a pile of crap and somethings wrong lord and behold when they sent the engineers back out AGAIN they said to our faces that it doesn’t make 700 horsepower... it’s fine.

[@anoint426hemi6]

@@agenttex7569 i had an 2018 m6 hellcat that was shit in low gear. I should have filed a lemon law complaint but traded it off and took a giant $$ hit.

[@agenttex7569]

Anoint426 Hemi yeah my uncle took the same hit while trading in the cat and his truck to get out of it.

[@anoint426hemi6]

@@agenttex7569 ive got a a8 kitty now and it runs pretty good. Air temperature plays a big role on how it runs on the street. Seriously thinking about getting rid of it but i hate to lose another 20k. Im retired so money is tight. and you ask if its so tight why spend it? My health isnt that great and why not own one even if its only for a short time plus i have no desire to leave money to my grown up kids and grandkids.

[@williamamell4712]

Looks like a much better engineered brace than most of the others

[@DrivewayDemons]

Absolutely

[@montefiveforty1]

Should of came from the factory with that.

[@DrivewayDemons]

montefiveforty1 agreed!

[@alanzolotoff6014]

Hey Cory, do you know if Mike717 is going to Dino his vette when he’s done ? I know the mechanic that will be working on it and I heard from him it’s going to be a little over 900hp on 93 octane !!! Can’t wait to see the next race 👍🏽👍🏽👍🏽

[@Paul-qq7mh]

Im sure if the Redeye needed a diff brace the Engineers at Dodge would have installed one.

[@HellcatDreaminJosh]

DD Squad

[@JeffCarsboatsatvs]

Cory got the new car check it out on my account do t laugh I’m new at video recording lol let me know if you like the colors I’m also getting the zl1 mud flaps and 3m film Wednesday

[@MandieNRG]

This is all so cool bro, but word of advice..... Needs more Eurobeat.

[@anoint426hemi6]

FYI Ive been wrenching a very long time and have never seen someone use a torque wrench like that. You can possibly throw the torque value out the window by not holding the wrench correctly. Also you kept pulling on the wrench even after it clicked. Why? That changed the specified torque values. and never jerk on the wrench, it should be a smooth pull.🙄

[@Devtooraww]

He keeps adding mods but still get walked by @streetspeed717

[@jamesprichard1647]

DevToo Raww whatever you say troll. He walked streetspeed717 while spinning. Your just looking for trouble and drama. Must be a child. Do you even own a car?