perfect inside miter joint hack - baseboard molding install

[@gardenvskitchenbyniranyain3991]

I was frustrated with this problem since I recovered your VDO, now…I am no more stressed. Thank you so much.

[@Daddyo7391]

You have no idea how much more comfortable you just made me regarding the inside corners. First time doing baseboards so was a bit nervous. This is awesome! Thank you for the direction.

[@DjcHuCkNiCe1]

Wow, just wow......I don't know whether I should laugh or cry, as I reflect on the last 13 years of my life.

[@okchico]

lol ditto but 30 years

[@samoanSAIYAN]

What you mitre all your internals did you? 😂🤣😂 Shit I'd be laughing too. Coping foot on jigsaw and flap disc on grinder is the way to go. In and out off jobs in secs. Awrsome stuff Bill!

[@DjcHuCkNiCe1]

@@samoanSAIYAN Sure did!! Too many times to count or admit 🤦‍♂️

[@carlanthonyholmes2162]

Me too as I spent ages coving edges with all sorts of angles. Luckily I haven't done the base-boards yet.

[@Mojothepyrut]

Me off to b n q for one of these nice time saver for tomorrow thanks

[@James-mw4sh]

I watched many videos on KZbin on how to do this and no one explained this and demonstrated this as clearly as you do not to mention the use of the angle grinder was pure genius. This video was a life saver for me!

[@boogie1014]

BILL THIS VIDEO NEEDS 1million LIKES. Thankyou!!!!!!!

[@andyhungnguyen479]

No matter how many times I measure. I will never get that perfect cut. You, my friend, are a genius. Thank you!

[@nessfittraining9679]

Wow genius! I can’t wait to try this. Coping saw is a pain in the neck when you’ve never done it before and so time consuming.

[@nickspeller3372]

That is amazing...so much cheaper than buying different tools; very effective and lots of room for adjustment. Cheers Mate!

[@billshowto]

You’re welcome 👍

[@aaaMommm]

No I'm a female and have no clue and I wanted to try the base board install myself and I searched YT for many videos just getting me frustrated UNTIL I came across this video and OMG....the I install I did looks better than the guy that did ours years ago. I have NO GAP and the other guys that did ours years ago has major gaps so now I'm going to redo them all thanks to this wonderful gentleman explaining and the outcome is so beautiful. I can barely see any gap! HANDS DOWN THE BEST VIDEO!!!!

[@Secularworld60]

I just bought the same skirting from bunnings , that profile has been around for decades , so nice to find the same replacement profile

[@bulilittv5064]

Wow dude!! I’ve spent 30min going through useless videos where no one really shows anything useful for a simple DIYer (without specialist saws) and here you pop!! This has saved me a lot of frustration and anger!!

[@MizSuz]

Bloody brilliant! A flap disc. Duh. I'm sitting here looking at all the cuts I need to make without a miter saw and not really feeling the coping saw and thinking 'can't i use my multi tool or grinder?" and you come along and make my wishes come true. I'm subscribing, Bill, because you just saved me so much time and trouble.

[@robira1313]

I use a scroll saw.

[@woodyg768]

I worked with some amish guys 20 years ago ,and i learned this from them, (coping saw)but i haven't done it in so long,and now I'm back doing handyman work and this will be what I'm doing monday morning,Thanks for the refresher!👍

[@danieldoherty8009]

Best yet ,great finish to .I will be doing a room tomorrow and I know the corners are away off square ,and I wasn't looking forward to it ,but now I am .

[@Boomstck]

Just tried this and it worked ridiculously well! Close to perfected after using the flap disc on the angle grinder, and a little sand paper made it a perfect fit. Inside corners will be very easy going forward! 👍

[@billshowto]

👍

[@tigerstailz]

You, my friend are a genius! I would have ever thought of such a thing until watching this video. Thanks for the amazing bit of information. Enjoy the rest of you day!

[@billshowto]

I’m glad you enjoyed the video 👍

[@1Daftboy]

Thank you for the excellant tip. You are boon to the home handyman. I got so frustrated thinking I was crap at cutting a degree joint despite any tool I bought. Awsome, now I don't have to buy my filler in gallon containers.

[@nelzandfriends6144]

Doing some indirect lighting molding. You helped me out big time.

[@deandean7758]

Definitely investing in some sanding/flap discs.... soooooo much quicker and much better profile than coping saw or jiggy..... 1st hack ive ever seen online that I take my hat off to and will deffo use

[@duoderf12]

This is the best explanation I've seen on KZbin how to do this thank you

[@arnoldasmarkvaldas8]

You are Pure LEGEND. I will be doing it first time in my life and yours video is sooo good and I will go with your advice. Thank you Sir sooo much!!!!

[@lennygize]

Genius... Always had a problem with this and coping is just to time consuming. You really have sorted a major problem for me... Thank you

[@MORGAN31ish]

You sir have just made my day and made my wifey like me just that tiny bit more. Thank you so much for the tips or should i say Magic lol 😆 my room is gonna look smart now thanks to this clip 👌🙏👍

[@beardedelephant3023]

Nice. I’m just getting into buying tools and DIY so this is a blessing!!!! Thank you for sharing

[@beardedelephant3023]

Same

[@tlrmd4you]

You are the best!!! Such a simplified explanation!!! Thank you for us beginners!!! Wow!!! Still cant believe what I just learned from you in less then,10 minutes!! More valuable then 20 years!!! Haha, your the best!!!

[@hart316]

Genius!! For someone who doesn't do it often and for a few cuts.. Thank you!

[@paultaylor4144]

Mate I am a chippy (Carpenter) and that was bloody awesome... I've been using a jigsaw or coping saw for years. Never actually thought of that... You've made my day! Cheers bud 🙂

[@billshowto]

You’re very welcome 👍

[@diogenes794]

Dang, this is easier than i expected. Thanks for the upload!

[@welshdragon2008]

I've never seen this method before. Well done showing it

[@nedstudios6490]

I'm impressed. I'm so glad I found this video. I have an entire apartment to do after the old got baseboards got ripped to shreds for new wood flooring. Well done! shout out to ENGLAND. MANCHESTER UNITED! Sorry I got excited about football.

[@pampam7]

Love your videos, you get straight to the point no long winded explanations. Love it, I have binge watching your vids lately, thanks for taking the time to upload. Keep them coming.

[@billshowto]

I’m glad you’re enjoying them 👍

[@icewoodcell8506]

Best one I’ve seen yet !!!! I’m a DIY and I’m installing chair rail in my man sanctuary and this is the video that have my confidence a boost !! I’m going to purchase a mitre saw tomorrow. I already have an angle grinder Thanks

[@thejulionation]

Mind blown!! How come I never knew this. Awesome hack. Thanks.

[@kennethamend8557]

I'm in the process of painting and refinishing the wood floors. I plan on removing the baseboards before sanding the floors. I'm going to definitely apply this grinder technique.

[@SidwSace]

As an artist, I seriously appreciate your technique.

[@mikedelgrande106]

Best video and explanation by far and I have watched TOO many to get this technique down. Thanks.

[@Stevej2013]

Bloody awesome Bill. I am doing my baseboards at home now and had this problem. Thank you mate.

[@littlemissy8356]

WOW. That might be really the best way. Trying to cope is hard otherwise.

[@mason4295]

You're a legend Bill

[@mrhuss4939]

You sir have saved me so much time with this. Thank you

[@reborika]

what the actual?!! very kewl trick thanks for sharing!!!

[@olihege1080]

fast and perfect made - best method ever!

[@anthonypaynter828]

That's brilliant. Just so easy when you know how. Thanks Bill.

[@motcam]

best presentation I've seen so far. No muss, no fuss, just usable information. Thanks

[@Jason-xo1gr]

At first I thought you were simply over complicating it, But my mind is blown!

[@billshowto]

It’s very easy and fast to do it this way 👍👍

[@rexchidgey7911]

Excellent hack... Thanks immensely.

[@user-lf7en6rf8m]

Hi, that sanding bit is the key, much easier then coping for sure, im sold thank you 😊

[@anawile3152]

Thank you so much. Yours is the clearest, easiest to follow. I can stop eating chocolate and go back to work!

[@maysaraabdo5339]

OMG, I couldn't agree more I've been watching for videos for weeks and this video did it!!!!!! I'm going back to work starting today...Basement here I come baby I'm finishing you up!!!!!!

[@beinspired1487]

Thank you, I will be trying this our n my new house renovation.

[@KaylaRoseCampbell]

Easiest way I’ve seen this explained. Thank you so fucking much my trim is going to look godly!!!😍😍😍Sincerely all of the contractors and DIYers out there.

[@NosePrint]

SUBBED FOR THIS VIDEO ALONE! CHEERS BILL! THIS IS EXCELLENT

[@kevinsantoyo323]

Great video!!! 100% quality learning! Best part it’s all free. This video is gold. Thanks mate!

[@billshowto]

👍

[@darlenehale9192]

I don't have a copping saw so it was great that you used a grinder instead. So much easier! thanks.

[@Willym_Atl]

You make it look so easy. I know I would f it up! I'll stick with the coping saw but great video!!

[@muddyfunker3014]

This is actually brilliant. Before you started I was thinking yeah scribing it and using a coping saw is the way it's going to be done, the only way it can be done. What a great surprise. Thanks for the video 👍🏻

[@shanemichael894]

Great video with simple instructions 💪🏽 thank you

[@sarahva]

So awesome thank you! Another good excuse to buy a new tool! Looking forward to redoing my trim now!

[@bbq-qs8js]

Hahaha this is true! Going to home depot now

[@mookyyzed2216]

This is actually a hack that's useful.

[@geeman5294]

Brilliant, saves a lot of Time , I like things done like yesterday

[@susanmitchell6070]

Brilliant video! Such a great tip.

[@mijalic1]

Great presentation. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.

[@simonknowles4267]

Absolutely brilliant. Really appreciate your knowledge. I know what I’m doing from now on.

[@AxellTh]

What a good tip and nicely explained.

[@glennfolau6959]

I was taught to cope using a coping saw by an old school carpenter, however, have always found this awkward, I will try this method from now on in. Cheers

[@signalsoldier]

I'm so glad I clicked on this video! That's so much faster and precise! Thanks Cheers from Mississippi, USA

[@billshowto]

👍

[@metro7films]

You da freakin' MAN!!! Thanks for sharing!!!!!

[@DiannaAtherton]

Yes... Makes total sense to me. I am so nervous about installing my baseboards. This I can do. Thanks

[@avniqueb]

Your channel is so good ! Subscribing for these good hacks

[@billshowto]

👍

[@mickfalvey6045]

They say timing is everything Bill im just gunna do some trim this weekend and this is a great bit of advice from you (as usual) Cheers mate👍

[@billshowto]

Glad I could help, Iv been doing mine for a while now replacing them throughout the house along with doors and windows.

[@robofurious]

Thanks to you sir! there was a reason why I bought an angle grinder.

[@Wenda_897]

Beautiful! Your the only video I had to watch! You get straight to the point! No extra fluff and wasting time!

[@carolaaron5424]

Never seen that before. Very impressed with the angle grinder trick! Love it. Thanks!

[@auramaarifat5937]

im feel really thankful, no one explained very clear like u.. thank u for the lesson

[@jactac879]

Great video, made it look simple.

[@yakittyyeah7649]

Wow, impressive, and so quick. Thank You

[@PatrickJaszewski]

This is going to save me a lot of time! Thanks!

[@titop6152]

Super hack 💪🤡👍 I’ve seen so many videos but nothing. Now this video solved the problem just about for everyone including the president.

[@tonefilter9480]

you are a very good teacher Bill. Thanks

[@OG_Darkman]

I will be trying this soon thank you so much

[@nickpritchard7130]

Great vid..Big thanks for this one..

[@_JuicyJ]

Wow, what an awesome tip. Thanks a million!!

[@kevinkaelin7410]

That's awesome. I'll give it a try next time.

[@RachelleWilliamsTV]

wow you made it looks so easy !! I love it . thank you

[@number1pappy]

I would only do this for stained trim. For painted trim, simply cut the corners at 46 degrees. This works just fine!

[@toddmckee9578]

Very nice explanation Good camera work I'm going to do it soon in my cabin on chair rail and baseboard thank you for your help

[@KatrinaB82]

Wonderful job!!!! Thank you!!!

[@tyrongovender7675]

You are a genius...

[@metro8974]

Thats crazy, great job 👍

[@heatherainsworth7935]

This is FANTASTIC!!

[@deenamoodley4488]

Thank you Bill absolutely useful tip

[@billshowto]

👍

[@deeyup]

You sir, are a fucking genius. Did my 1st one perfect in mere minutes. Another tip if using a mitre saw, cut as much excess off before using the flap disc. Even quicker!

[@andrewlabree4905]

Legend! Although I feel bad for my coping saw now, it'll never get used again.

[@leneembury7889]

Excellent tutorial!✨

[@MichaelHooten85]

This is exactly what I wanted to see THANK YOU!

[@joshf8231]

Nice I like using a grinder on it.

[@simoncloake8051]

I find a 'flapper disc' works great 👍

[@billshowto]

👍

[@richmac918]

I've always used a coping saw to back cut the molding but this method of using a angle grinder might actually be faster. I'll have to brush up on my grinding skills and give it a try

[@hairrus7278]

Quick and to the point. Not a lot of talking.

[@billsimpson2392]

Cool name.... lol Thanks for the advice dude 👍👍

[@anthonybelt7415]

That's the way to do it. Time saving at its best. Thanks........,.