PERFECT PASS CARBON BUILD (part 2)

[@RazShifrin]

Great video as usual and thank you!!

[@jamesmccoy204]

Thank you for the great parts and support

[@jasonjohnson6085]

Awesome build James. Thank you for a knowledge your passing on. You even talked about gearing, which a lot guys don’t like too. There’s no guarantee the next guy is going to get the same results. I think a lot of it is just skills and experience. Appreciate you brother

[@semadragun]

Awesome build thanks for the time for showing us.

[@tripletrc5654]

Thanx so much for sharing all this with us James. I learned so much from you and being new to the speedrun scene it's much appreciated. Can't wait to see this turn and burn brother.

[@2878899]

Thanks alot James and well done!

[@gillian9178]

James a huge thank you for sharing your experience & knowledge with everyone, much appreciated man & stay safe.

[@BUSTNLOS]

Another great informative video Mr. James. I really appreciate you taking the time to share with us your knowledge and expertise. I'm fairly new to the speed racing scene. My builds are pretty much built off of what I have learned from you and Raz Shifrin. Keep up the great work and videos.

[@jamesmccoy204]

Thank you , More to come

[@cowboyross]

Hey James thank you for sharing your build I love watching your videos. You are the man. Keep Going my brother 👍🏿 ❤😁

[@wedro6296]

Ty James!!! Your videos given me brain relax! Watching you from Ukraine!!! TY!

[@jamesmccoy204]

Thank you

[@Soney_Manic]

Some great tips there. Thank you for sharing your knowledge.

[@princekingrc6628]

Great part 2 sir speed master!!!

[@Joseramos1]

Awesome beautiful build you a bad man keep doing what you’re doing. I’m learning from the best.

[@bernidampfff]

Thank you for sharing ✌👍

[@m2cracing168]

always learning. certainly did today. thanks for posting, cant wait to see her go!

[@jamesmccoy204]

Thank you brother

[@Captinfun101]

Do exactly the same with front post. Nice clean build . Great tips .

[@RittenhouseLifestyle7]

Subscribed. I only started in RC a few months ago. I became hooked when I started watching speedrun videos. Bought a tt02R chassis and learned a lot from that build. Tried to do some speedruns and long story short, I realized it’s a huge challenge to get a tt02 mid 100s. So I got a vendetta, did every single mod you can imagine. Literally. Now, I want to build a perfect pass replica of Raz’s dual motor. So I bought the glossy GT Chassis when he just got more in stock and I ordered. Brand new limitless v2. Then, I realized, anyone using the GT Chassis, isn’t using the limitless body. 😂. Such a newbie. I’m going to keep on building it and was also curious if you knew is it a clean swap over? New v2 to the pp chassis??

[@jamesmccoy204]

Thank you for watching. Yes the V2 to Perfect Pass chassis is a straight across swap

[@mitchellminer4596]

Good stuff buddy! Cant wait to see it run! I run that velcro and you can barely get batteries off the chassis after!😂super strong stuff 👍👍Great vid man!

[@marquinhogj]

Ok Bom vídeo, peguei algu detalhes importantes. Obrigado!!!! Thanks

[@oscarvelazquez2128]

Thanks for an awesome videos full of great info. James after the build is done and the ride high is set. How do you fine tune the ride high? And what i mean is when checking that the tires hit the floor at the same time or when raising the front and 1 tire won't touch the ground while the other tire does? Thanks again

[@rtz549]

Run 4 bats for traction and to counter voltage sag.

[@fredericktodd5789]

This has been very helpful to me. I'm using the perfect pass springs also. I see you are using bump stops with yours also, are they necessary with those springs?

[@jamesmccoy204]

Glad it was helpful, Bump stops are not necessary with all setups , on some of my dual motor cars i still run , these shocks were off of another car that already had them so i just left them installed

[@fredericktodd5789]

@jamesmccoy204 I'm doing my shocks now with the DU-BRO washers. Can't seem to get the front low enough. The washer does go under the piston..right?

[@Imperial_Rc]

Nice !

[@LIMITLESS_RC]

On my way to do a speed run now with the SRD V3’s 8600’s ….got the 10,500 coming (4s all)

[@Captinfun101]

I literally ordered the exact same sets today. I’m in Australia so it’s super hard to get good lipos here. But finally got someone to help. Can’t wait see if they do as good as onyx.

[@rtz549]

Get some software written up for traction control and able to steer itself down the track.

[@jamesmccoy204]

Actually the only traction control I need is my throttle finger , and steering is my other hand , I like to drive my cars ,

[@Captinfun101]

I’m interested in how you do your steering as in trim amount etc. if that’s something you would share.

[@jamesmccoy204]

Ill put that in the on the airstrip portion on my next video

[@Captinfun101]

@@jamesmccoy204 awesome, thanks . Also you have to change your handle again @jamesmccoy222!!!😜

[@LIMITLESS_RC]

You mind me asking what kv that 5860 1/5 motor was? I had one before (it was a beast) but 6-pole and I think too high kv because I kept blowing out ESC’s even with conservative gearing. I got the 4080 now love it

[@jamesmccoy204]

1150kv , Unfortunately 6 pole motors dont always play nice with the xlx2.

[@LIMITLESS_RC]

Thanks man!!

[@Trystan46]

What body have you used James ? Delta plastik which one ?

[@jamesmccoy204]

I mostly run the FC100 and WR bodies but I have ran others also

[@Trystan46]

@@jamesmccoy204 thank you ! Can’t wait for the special build your keeping to yourself 😀 👍👍. #inspiration

[@geraldduchatelier9970]

How much is the chassis plate itself? This is the third time I’m asking no answer yet

[@jamesmccoy204]

Check out perfectpassrc.com everything is listed

[@AndyTSLMachinist]

Where are the link to motor mount and center gears cover?

[@jamesmccoy204]

practicalproto.com/

[@jamesmccoy204]

Check out all the PPS parts

[@AndyTSLMachinist]

Thank you I just order the motor mount, you are awesome!

[@jamesmccoy204]

@AndyTSLMachinist thank you brother, always glad to help

[@LIMITLESS_RC]

What diameter do you shave your foams to? 95mm?

[@jamesmccoy204]

Really depends on the car , but 96 to 98mm,

[@LIMITLESS_RC]

Thanks bud. Least favorite part of this hobby is trimming down my foams.

[@rtz549]

Can you run it with no body?

[@jamesmccoy204]

No , not at any real speed

[@TheToecutter69]

Looking forward to that new build! Your vids are second to none. 🤘🏼🤘🏼