PROS ONLY! - ARRMA Side Skirts By Perfect Pass

[@RazShifrin]

Everything You Need Is Here.. www.perfectpassrc.com/

[@hoopsjoops]

random question: on your speed run cars, why do you cut out the rear wheel arches or leave the wheels open, wouldn't it be better for aerodynamics if the rear wheels were covered? kinda like the jaguar xjr9

[@StevesModernReviews]

Yes but also at 150mph the lexan body acts like a parachute having the air just exit out the back helps From lifting the car up I’m pretty sure,

[@FarmerFpv]

@@StevesModernReviews The air only exits the back. The open wheels create a vacuum making it more prone to cause the car to lift up. Closing the wheel wells would decrease parasitic drag significantly. Keeping the front end down is a balance of downforce and tight suspension, there is a sweet spot. Rear squatting is the number one cause of front lifting. That is when the downforce of the front can't overcome the downforce of the rear wing.

[@eddymcintosh5551]

That stops ballooning

[@501speedcrew9]

Sounds like some AMAZING PARTS.

[@sheliabryant1911]

Yaaaa we're not rookies...don't think we need thowe.thanks so much for the vid. We're rocking the perfect pass servo and driveshafts in our drift felony and absolutely love your products. Raz and Basherqeen definitely have the finest of the carbon in the rc hobby.keep it up.man. 200mph is calling yew.

[@toysforboysrc]

This is why you’re one of the best.. attention to detail. Some might not see the importance of a wedge, but to the ones who need it, it can make or brake their build. Great job Raz🫡

[@islerenner]

Looks amazing Raz, as always. Been a couple years now that I've been enjoying your content. Thanks again for the personal voice messages and assistance when I was building my first Limitless. I remember when you posted the PP launch control video, I had it purchased before the video ended!! Hope you're well my friend. All the best.

[@benjaminwinkel473]

how did you synchronize the motors?

[@HazardOfExistance]

Hi Raz, how difficult would it be to make an Arrma limitless chassis from CF? This way you get everything in one piece out the box.

[@TpPartsRcXtreme]

This makes your mouth water Raz 😋, like alw good explenation ❤️

[@RittenhouseLifestyle7]

I just purchased a vendetta brand new. It was too good a price to pass up. I went in the perfect pass website, but I learned the hard way now with disappointment, that you don’t have many parts for the vendetta or am I wrong? I also researched as much as I could. Can I use infraction side skirts and front skirts??

[@Chupapima]

What is the app you use for car setups?

[@paulus842000]

Awsome video Raz, I love your honesty and explaining what you have to do when you get your amazing products, that is what I call looking out for your clients, it's not often that we see this quality today. I live your honesty, this is what keeps the hobby alive. Thank you for your time and effort to make the hobby even better 👍❤️

[@julianwolf1689]

Does work this kit also on the new Limitless V2?

[@wellcrc-6703]

So i just started into the speed run game myself. Nothing crazy. Just a simple question. 6s felony. 2300kv. What would be a more ideal gearing for speed runs 30/30 or 35/36. Any and all help is greatly appreciated

[@seanlevifreerider9956]

חיפשתי איתם באמזון וכבר אין הורדת את המוצר ?

[@williamthedoorman9610]

Shalom raz very nice carbon fiber sides that perfect pass came out with, thank you so much for manufacturing R/C parts , the PP servo Kevin talbot got from you is sick, wow so fast and strong great job well done raz , and I cant wait to see you hanging with Kevin talbot how many days are you going to stay in England, tu da brother thanks your friendly neighborhood Doorman william from NYC forgettaboutit 👊 😀

[@RazShifrin]

Thanks William!

[@namkusta6907]

What’s the width of the skirts?

[@vfb5]

You can create some 3d printed battery and receiver mounts.

[@brandobashin4838]

Another item that’s about to be in my cart 🤩

[@RoostedFilms]

This looks perfect for us 150 mph rookies ... Thanks RAZ

[@MakingDirtFly]

I think it will seall great! Everyone I've ever seen with an infraction, felony, or limitless has at least 1 customization added. I think most people with that level speed car will know how do some customization. I wouldnt worry.

[@rcnitro001]

Are these 3mm or 5mm carbon? That look pretty good

[@occrc3333]

Do you know where I could find that chassis with no holes? Carbon skirts are beautiful btw. Quality parts as expected

[@disciplinerc]

Less chatting, more taking my money already 🤣

[@joshherrman3201]

Raz thanks for sharing these beautiful builds with us and investing your money and time so we can own these quality part's.

[@rcspeedrunner]

Hi Raz! Looks like you modified the chassis to house the 1721's, so in fact you modified it to a V2 :) BUT... you don't use a "V2 spool"! Clever work on the thumbnail ;) Curious about what you have for us in the future! Love to see more! There is so much more to win with this platform!

[@mantisfpv4514]

I just mounted mine... Thanks for the allsome product

[@cyclonerc1625]

Oh Yeah First 👍🔥🤪😎

[@nelsonperez7905]

The tires are directional 😂👍🏽

[@bensettos8705]

Those side skirts are beautiful

[@zagertRC]

I need a set!😍

[@ToiletduckX]

Raz pushing forward the hobby for the people again!

[@cool.stuffs]

Another great product. Just ordered it. Now should I incorporate it into an existing platform or build a new ground up dual motor setup 🤔🤷

[@mattsmith3607]

yes

[@trevorthomas6043]

I would like to see this car in a wind-tunnel.Unfortunately wind tunnel cost about about ten-thousand dollars a second.Looking forward to updates

[@davidchennellsjr.6799]

My Perfect Pass Monster servo just showed up. Awesome birthday today also got my Arrma Infraction 3s blx today. Can't wait to see what parts you come out with for the Infraction 3s blx

[@robbryan3044]

I think the link is "broken". It leads to Amazon, but all I see is a message stating, "Sorry, we couldn't find that page "

[@949Designs]

Good stuff brother! I don't like milling cabon fiber on my machine. You just saved me a ton of time right here. Are you having more success running the foamies? Are those wheels/tires on the build that is complete from GRP?

[@RazShifrin]

Thanks and Gone Bananas

[@christophertaylor8236]

I have a problem Raz. I installed Perfect Pass in my Limitless with the Max6 ESC and it worked great from the off but I upped the brake rate on the ESC after which Perfect Pass stoped working. I recalibrated everything as per instructions but it still did not work. I connected Perfect Pass to one off my other cars and it worked. What went wrong?

[@RazShifrin]

Hmm.. that's a tricky one especially when it worked on another car, honestly I don't know:/.

[@FamilyMan1]

How do you account for ballooning how tires ? Real question not trolling?!

[@hansdahlberg7105]

Foam tires dont ballooning

[@RazShifrin]

There's enough room

[@FamilyMan1]

@@RazShifrin awesome 👌 I'm assuming you'll use them on your speed cars eventually then I'll get to see them in action..thanks for the reply!

[@rcsmith5909]

Sweet 👊🏻👍🏼👍🏼

[@arrmaarrma7565]

I love it!!!! 🤘💪💪

[@ChrisTeamOnyx]

Perfect to show us all at Rossa

[@Deloc92]

Respect to you raz , waiting on a speed run

[@mitchellminer4596]

Perfect! And SOLD ordering soon!👍👍

[@anthsrc]

Fantastic mate so much better than buying a separate GT chassis, I'm getting one 👍

[@how2749]

Great work, they do look amazingly correct, as if its part of the car, 👌👌👌👌👌👌👍👍👍👍👍👍

[@meanmachinesrcclub]

Sounds excellent!

[@FrancescoAltanese]

Che spettacolo 😮😮

[@jamesandonian7829]

Maybe try cutting air louvers (air vents) above the front wheels. This will reduce drag. Look up LMP cars for reference.

[@jonlewis758]

Pretty cool

[@rcadventures578]

I'll eventually get there. New to the hobby

[@donniemarks94]

I am a rookie I just installed some luxury rc CF side skirts that doesn’t require any modifications

[@jessekormick3796]

Kick ass part👍🏻💯

[@mikeinvegas1]

Nice.. one of very few vidoes u post anymore. Looks like nice product tho.

[@metal4lifetime]

Pro's only. Well here we go 🥴🥴🥴🥴🤣🤣🤣🤣

[@BrownStick]

Everyone: milled Raz: meeled

[@tonyromano6220]

Ahhh! I thought I was going to have to modify all that stock sheet!

[@robsrcinsanity1220]

Super nice. 👍🏻🍻

[@1builtGTR]

Please make videos of stock RTR cars please !!!!!!!!!!!!!! You are a great editor but a lot of us are not interested in hacking or modding to such extent.

[@Luke-en2tk]

Just beautiful

[@bigboytoyzrc9258]

Beastiful🔥🔥🔥🏎💨

[@RoniMeller]

King

[@SoneyManic]

Quality mate!!!!

[@markkumollari43]

Cool👍 🇨🇦👈🤠

[@Tony-ml4lp]

For pros only lol😂 Should be, For pros only that' use gyros and throttle controllers that can't drive👌

[@RazShifrin]

You're always obsessed with my channel and videos..been seeing your comments on every video, thank you❤️

[@Tony-ml4lp]

@@RazShifrin ahh no, only about 3 vids , and just obsessed with how much info you share that you stole from real speedrunners from around the world, and clame that its your own, now that's just sad, and thank you for showing your true self

[@Killa_b_rc]

Nice!

[@VDVC-RC]

@KevinTalbot is probably kicking himself Right now... See his latest speed build.

[@christianrivera2851]

🤤😍 nada más que decir wuao

[@blackwolfrc]

🔥Bro

[@Keretabarracuda]

Nice

[@shanehoule9477]

Bad ass man

[@ErocsRc]

Niiiiice!

[@A.R.C.77]

😁🤘

[@CmwSpeedrunUk]

💪🏽🇬🇧👌🏽👌🏽👌🏽

[@rctraildriversuk-lone-wolfvide]

that is a sexy chassis

[@severinasaf]

Amaziing!!!🫶🤟

[@Imperial_Rc]

Nice!